Overview

I have an orphaned asset folder taking up 9.13GB located at: /System/Library/AssetsV2/com_apple_MobileAsset_iOSSimulatorRuntime/c0d3fd05106683ba0b3680d4d1afec65f098d700.asset It contains SimulatorRuntimeAsset version 18.5 (Build 22F77). Active Version: My current Xcode setup is using version 26.2 (Build 23C54). I checked the plist files in the directory and found what seems to be the cause of the issue: The "Never Collected" Flag: The Info.plist inside the orphaned asset folder explicitly sets the garbage collection behavior to "NeverCollected": <key>__AssetDefaultGarbageCollectionBehavior</key> <string>NeverCollected</string> The Catalog Mismatch: The master catalog file (com_apple_MobileAsset_iOSSimulatorRuntime.xml) in the parent directory only lists the new version (26.2). Because the old version (18.5) is missing from this XML, Xcode and mobileassetd seem to have lost track of it entirely. What I Have Tried (All Failed) Xcode Components: The version 18.5 does not appear in Settings -> Components, so I cannot delete it via the GUI. Simctl: xcrun simctl list runtimes does not list this version. Running xcrun simctl runtime delete 22F77 fails with: "No runtime disk images or bundles found matching '22F77'." Manual Deletion: sudo rm -rf [path] fails with "Operation not permitted", presumably because /System/Library/AssetsV2 is SIP-protected. Third-party Tools: Apps like DevCleaner do not detect this runtime (likely because they only scan ~/Library or /Library, not /System/Library). Has anyone found a way to force the system (perhaps via mobileassetd or a specific xcrun flag) to re-evaluate this folder and respect a deletion request? I am trying to avoid booting into Recovery Mode just to delete a cache file. Any insights on how AssetsV2 handles these "orphaned" files would be appreciated.

Hello, We are experiencing an issue related to push notifications after updating devices to iOS 26.4 Beta. Our system stores push notification tokens on the server by associating the device token with the device’s IDFV in the app. After updating a device to iOS 26.4 Beta, we observed that the device token from a previously uninstalled version of the app remains valid for more than a week. As a result, two push notifications are delivered to the same device. The situation is as follows: The user installs the app and a device token is generated. The user uninstalls the app. Later, the user installs the app again and a new device token is generated. However, the previous device token does not become invalid, even after more than a week. Because IDFV changes when the app is reinstalled, our server cannot determine that the device belongs to the same user. Therefore, we cannot overwrite the old token with the new one on the server side. Could you please advise: Is this behavior expected in iOS 26.4 Beta? How long does it normally take for a device token to become invalid after an app is uninstalled? What is the recommended approach to prevent duplicate push notifications in this situation? Any guidance would be greatly appreciated. Best regards

I’m encountering a persistent issue with my Network Extension (specifically NEFilterDataProvider) and would really appreciate any insights. The extension generally works as expected, but after some time — especially after sleep/wake cycles or network changes — a global network outage occurs. During this state, no network traffic works: pings fail, browsers can’t load pages, etc. As soon as I stop the extension (by disabling it in System Preferences), the network immediately recovers. If I re-enable it, the outage returns instantly. I’ve also noticed that once this happens, the extension stops receiving callbacks like handleNewFlow(), and reinstalling the app or restarting the extension doesn’t help. The only thing that resolves the issue is rebooting the system. After reboot, the extension works fine again — until the problem reoccurs later. I asked AI about this behavior, and it suggested the possibility that the kernel might have marked the extension as untrusted, causing the system to intentionally block all network traffic as a safety mechanism. Has anyone experienced similar behavior with NEFilterDataProvider? Could there be a way to detect or prevent this state without rebooting? Is there any logging or diagnostic data I should collect when it happens again? Any guidance or pointers would be greatly appreciated. Thanks in advance!

I have the following view hierarchy in my app: [UINavigationController] -> [MainViewController] -> [MyTabBarController] -> [DashboardViewController] In my MainViewController I have a button that pushes the MyTabBarController onto the navigation controllers stack. In the tab bar controller I only have one tab in this example showing the DashboardViewController. That all works fine, and when I tap the back button on MyTabBarController, everything works fine and the MainViewController is shown again. The UI works exactly how I want it, but when I load up the 'Debug Memory Graph' view, I can see that my DashboardViewController is still in memory and it seems the UITab has a reference to it. The MyTabBarController is NOT in memory anymore. MyTabBarController is very simple: class MyTabBarController: UITabBarController { override func viewDidLoad() { super.viewDidLoad() self.mode = .tabSidebar var allTabs:[UITab] = [] let mainTab = UITab(title: "Dashboard", image: UIImage(systemName: "chart.pie"), identifier: "dashboard", viewControllerProvider: { _ in return UINavigationController(rootViewController: DashboardViewController()) }) allTabs.append(mainTab) setTabs(allTabs, animated: false) } } And the DashboardViewController is empty: class DashboardViewController: UIViewController { } The only reason I created as a seperate class in this example is so I can easily see if it's visible in the memory debug view. I have uploaded the simple sample app to GitHub: https://github.com/fwaddle/TabbarMemoryLeakCheck Anyone have any suggestions? Here is a screen grab of the memory debug view showing the UITab having a reference to the DashboardViewController even though MyTabBarController has been dealloc'd:

Hi everyone, I have a SwiftUI app using CKQuerySubscription on the public database for social notifications (friend requests, recommendations, etc.). Push notifications work perfectly in the Development environment but never fire in Production (TestFlight). Setup: iOS 26.4, Xcode 26, Swift 6 Container: public database, CKQuerySubscription with .firesOnRecordCreation 5 subscriptions verified via CKDatabase.allSubscriptions() registerForRemoteNotifications() called unconditionally on every launch Valid APNS device token received in didRegisterForRemoteNotificationsWithDeviceToken Push Notifications + Background Modes (Remote notifications) capabilities enabled What works: All 5 subscriptions create successfully in Production Records are saved and queryable (in-app CloudKit fetches return them immediately) APNS production push works — tested via Xcode Push Notifications Console with the same device token, notification appeared instantly Everything works perfectly in the Development environment (subscriptions fire, push arrives) What doesn't work: When a record is created that matches a subscription predicate, no APNS push is ever delivered in Production Tested with records created from the app (device to device) and from CloudKit Dashboard — neither triggers push Tried: fresh subscription IDs, minimal NotificationInfo (just alertBody), stripped shouldSendContentAvailable, created an APNs key, toggled Push capability in Xcode, re-deployed schema from dev to prod Additional finding: One of my record types (CompletionNotification) was returning BAD_REQUEST when creating a subscription in Production, despite working in Development. Re-deploying the development schema to production (which reported "no changes") fixed the subscription creation. This suggests the production environment had inconsistent subscription state for that record type, possibly from the type being auto-created by a record save before formal schema deployment. I suspect a similar issue may be affecting the subscription-to-APNS pipeline for all my record types — the subscriptions exist and predicates match, but the production environment isn't wiring them to APNS delivery. Subscription creation code (simplified): let subscription = CKQuerySubscription( recordType: "FriendRequest", predicate: NSPredicate(format: "receiverID == %@ AND status == %@", userID, "pending"), subscriptionID: "fr-sub-v3", options: [.firesOnRecordCreation] ) let info = CKSubscription.NotificationInfo() info.titleLocalizationKey = "Friend Request" info.alertLocalizationKey = "FRIEND_REQUEST_BODY" info.alertLocalizationArgs = ["senderUsername"] info.soundName = "default" info.shouldBadge = true info.desiredKeys = ["senderUsername", "senderID"] info.category = "FRIEND_REQUEST" subscription.notificationInfo = info try await database.save(subscription) Has anyone encountered this? Is there a way to "reset" the subscription-to-APNS pipeline for a production container? I'd really appreciate any guidance on how to resolve and get my push notifications back to normal. Many thanks, Dimitar - LaterRex

When an app is trying to access identities put in the keychain by cryptotokenkit extension, the user gets asked a permission pop-up which reads 'Token Access Request" would like access a token provided by: " with 2 options 'Don't allow' and 'OK' I accidently clicked "Don't allow" and now can't access identities put in crypto token kit. How can I reset the preference?

A macOS privileged helper tool that uses SubProcess crashes on intel Macs (running macOS 13 - 15: unable to test on macOS 26 on intel) with the error that libswiftCompatibilitySpan.dylib cannot be loaded when built with XCode 26.3. The same helper tool works as expected with XCode 26.2. The helper is installed using SMAppService. When I remove the dependency for SubProcess, the crash no longer occurs (but important functionality is also disabled).

they say developer action needed but I dont understand what they mean, they say I need to attach them to the binary but its already in the appstore and locked I presume, I am tring to create a second version (1.0.1) however I cant find the spot to add the subscriptions because I think they still need developer action kinda feel like I am in a loop and would appreciate some help. I have been using chatgpt but it does not seem to be able to figure it out either, hoping for some good old fashion human help :) thanks again for all that you do, excited to be in the app store and I know this is probably a simple config thing

I used to develop iPhone apps about a decade ago and am now back at it with an iPhone and companion Apple Watch app. Why does it suck so bad? I a must be doing something wrong, but what I am doing is out of the box. The majority of the time when I go to build on the watch I get: Previous preparation error: A connection to this device could not be established.; Timed out while attempting to establish tunnel using negotiated network parameters. Which I then first try to force quit the app on the watch and if that does not work, reboot the watch (which is pretty ridiculous). I tried Gemini and it gave me the following explanation: This is arguably the single most frustrating error in the entire watchOS development ecosystem. As an expert, I can tell you that you are not doing anything wrong; you are fighting a fragile architecture. Here is the technical breakdown of why this happens and a workflow to mitigate it without constant reboots. The Technical "Why" This error message reveals that the issue lies in the CoreDevice (and formerly usbmuxd) infrastructure, specifically in the secure transport layer. The "Tunnel" Failure: Xcode attempts to establish a secure, encrypted tunnel (DTXConnection) to the Apple Watch to push the debugger and the app binary. Unlike the iPhone, which can sustain a high-bandwidth connection easily, the Watch aggressively manages its radios (Bluetooth vs. WiFi vs. AWDL) to save battery. The "Handshake" Timeout: If the Watch is on Bluetooth (Low Energy) when Xcode initiates the tunnel, the bandwidth is insufficient. The system tries to escalate the connection to WiFi (or Apple Wireless Direct Link). If this negotiation takes even a few milliseconds too long—due to 2.4GHz interference, router mDNS configuration, or the Watch CPU being throttled—the handshake times out. The "Previous Preparation Error": This is the insidious part. Once the handshake fails once, Xcode’s device service caches that failure state for the device UUID. It marks the device as "unreachable" to prevent the IDE from hanging indefinitely on subsequent tries. Why you see it constantly: You aren't actually triggering a new connection attempt; you are hitting the cached "failed" state immediately. Unfortunately, the solutions it gives me are: The "Wired Proxy" Method (Most Reliable) This is the gold standard for watchOS debugging. Do not rely on "Connect via Network" for the Watch directly if you can avoid it. Disable WiFi on your Mac (temporarily) or ensure the Mac and iPhone are on the exact same SSID. Plug your iPhone into the Mac via USB. Ensure the Watch is paired to that iPhone. Result: Xcode will tunnel the instructions through the USB connection to the Phone, and the Phone acts as a high-bandwidth proxy to the Watch. This eliminates the "Mac-to-Watch" WiFi negotiation failure point. Do you hit this regularly? What do you do to make for a smooth development and deployment process? Or is it really this fragile? Thanks for any help! Bryan

My first App, a very simple one, is currently ‘Waiting for Review’. Is there anything else I need to do please, or do I just need to wait? Thanks

All system colors are displayed incorrectly on the popover view. Those are the same views present as a popover in light and dark mode. And those are the same views present as modal. And there is also a problem that when the popover is presented, switching to dark/light mode will not change the appearance. That affected all system apps. The following screenshot is already in dark mode. All those problem are occured on iOS 26 beta 3.

Each time I launch a Debug version of the app on iOS Simulator, I see the Launch Screen presented and then about a 30-second delay before the app is responsive and debug output appears in the console panel. Filed FB22345091

I am preparing for Swift Student Challenge, but it seems like the iPad Playground app still not support the latest SDK. I can't use frameworks like FoundationModel, etc., directly in playground app My playground for this year would require iPad environment since it uses PencilKit, ARKit, etc., and I also want to use the latest tech + the liquid glass UI Right now, I develop the project as a normal Xcode project, and I am wondering how do I post it? As Xcode playground, it must run on macOS As Swift Playground project, the iPad version of Playground does not support latest APIs and it can't compile

We've got an in-house Swift macOS desktop app with a FileProvider extension, which has been working fine on various machines up through Sonoma (and still does). We've just installed it on a Sequoia machine, and on it the FileProvider extension has lost the ability to access the shared app group. It can neither log to the Group Containers folder under ~/Library, nor access the pipe to the main app. The group name is formatted as group.XXXXXXXXXX.com.orgname.appname in both targets. I'm not sure why it combines the iOS and macOS conventions, with both the group prefix and the teamIdentifier one -- it was first built some time before the point in 2025 when macOS supported iOS-style groups -- but again, it's been working. For the record, The provisioning profile for EMPFileProvider has the App Groups capability enabled, and the App Groups capability is present in both build targets in Xcode. The existing group identifier is registered on the website; I've also manually registered the team-ID-less group name, so I can migrate. The question is, is this actually the right approach? Will such a change break the app on pre-Sequoia machines? And if I proceed, what do I need to do to complete the migration? The app was built back in Xcode 12.5; will I need to update the entire build environment to take advantage of Xcode 16.3's explicit support for iOS-style group names, or can I get away with it since I've manually registered the new group?

When i use the MFMailComposeViewController in visionOS, there is no cancel button for the controller. The button at the bottom closes the app. Is anyone else experiencing this? if([MFMailComposeViewController canSendMail]) { MFMailComposeViewController* controller = [[MFMailComposeViewController alloc] init]; controller.mailComposeDelegate = (id <MFMailComposeViewControllerDelegate>)view; [controller setToRecipients:toAddresses]; [controller setSubject:subject]; [controller setMessageBody:body isHTML:isHtml]; [view presentViewController:controller animated:YES completion:nil]; }

Hi, I do have a strange behavior in my development environment on a Mac mini (M4) running 26.2 and Xcode 26.3. Everything was working as expected. My project had a stable state and I wanted to enable iCloud support. As result I could not run the app any more because code signing failed with the message that my profile does not include the above entitlement. On my notebook (M2) with XCode 26.3 everything is working. Im am using GIT and both computers have identical code. The code compiling and running on my notebook will not run any more on my Max mini. Any help to find what might have broken the code signing and how it could be fixed? Thanks in advance.

The following issue has occurred: Push notifications are not being received on certain devices. What could be the possible causes? Push notifications are being sent from our own server, and we are receiving normal responses from APNs. Users have confirmed that notifications are enabled on their devices, and they report no network issues. This problem is occurring for multiple users.

Hi everyone, I'm a developer from China, and my Apple Developer Program membership is currently in the renewal period. When I click the renewal button from the banner at the top of the Apple Developer website, the page redirects but consistently shows a 503 Service Unavailable error. This has been happening for several days now. I've already tried: Switching to different devices or Changing network environments Unfortunately, the issue persists in all cases. Has anyone else encountered this same situation? Any help or suggestions would be greatly appreciated! Thanks in advance.

We have an app that controls InDesign Desktop and InDesignServer via hundreds of AppleScripts. Some macOS security updates a while back dictated that we start communicating with other apps via ScriptingBridge. We couldn't afford to convert the hundreds of AppleScripts into direct ScriptingBridge nomenclature, so we opted to keep them as is and instead tell the external apps to: [app doScript:<the script text> language:InDesignScLgApplescriptLanguage withArguments:nil undoMode:InDesignESUMScriptRequest undoName:@"blah"] There are a handful of scripts that we did convert to direct ScriptingBridge. There are times (and under the right circumstances, it's repeatable) when a certain script will have run perfectly dozens of times, and then it will throw errOSAInternalTableOverflow. We create a new SBApplication for every job (which could be a single instance of Desktop or the multiple instances of Server). Why is this error happening seemingly randomly? Is there anything we can do to work around or prevent this?

Hi, I faced with the issue on iOS 26.1 with PHPickerViewController. After first selection I save assetIdentifier of PHPickerResult for images. next time I open the picker I expect to have the images selected based on assetIdentifier Code: var config = PHPickerConfiguration(photoLibrary: .shared()) config.selectionLimit = 10 config.filter = .images config.preselectedAssetIdentifiers = images.compactMap(\.assetID) let picker = PHPickerViewController(configuration: config) picker.delegate = self present(picker, animated: true) But on iOS 26.1 they aren't selected. On lower iOS version all works fine. Does anybody faced with similar issue?