Unable to select the desired build in App Store Connect; clicking on the build has no effect. Steps to reproduce: 1.I select my app 2.I choose which build to add 3.I try to select the build Expected result: I should be able to select the build Actual result: Nothing happens Browsers Tested: Google Chrome (both PC and mobile), safari mobile Supporting Video: https://www.loom.com/share/cd9c831920fb43518ef461c9a697f09f?sid=9ce60f81-0a7c-44f4-b88a-74dcc9820e14, https://drive.google.com/file/d/1PJEixy8IpFTEEDLjBMQjV-b9U8zUM2S0/view?usp=sharing Screenshots: https://gyazo.com/e390a5ddaa142ac9e5cbb2a6757abee8, https://gyazo.com/08ac242fbfd61d375766da04f7eb209c

Hi, After installing Macos 26 Beta on my Mac Mini M1 it doesn't boot. On the front panel there is an orange blinking light. The monitor doesn't recognize it. In DFU mode my other Mac Mini (M4) recognizes it but I can't restore it from Configurator (see print). Thanks for your help.

So recently, last week, ive updated to the Dev Beta of ios 26. This began the very issue of my cellular data. I woke up to a warning symbol where my cellular bars should be, telling me there was something wrong with my antenna or carrier when in reality there was no problem with any of those problems and took up about 53% of my storage. This is absolutely insane and unacceptable.

I am writing to report a significant battery drain issue after updating my Apple Watch SE (2nd generation) to watchOS 26.0 beta. Since the update, my watch’s battery life has drastically decreased: it goes from 100% to 0% in just 6 hours, whereas previously, under my typical usage, a single charge would last about 1.5 days. I have already tried the following troubleshooting steps without success: 1. Performed a fresh reset of the watch. 2. Reset my iPhone. 3. Disabled background app activity. 4. Enabled airplane mode and power saving mode. 5. Disabled Live Activities and Photo Memories Despite these measures, the issue persists. The battery health of my watch is at 90%, so I believe this is likely related to the software update. I am quite concerned about this situation. I have researched and noticed that similar battery drain problems were reported by beta testers of watchOS 11, and unfortunately, there appeared to be no clear resolution at that time. I rely on my Apple Watch daily, and I sincerely hope this can be addressed soon. I would appreciate your assistance in resolving this issue, as it is significantly affecting the usability of my Apple Watch. Thank you for your attention to this matter.

O aplicativo do PAGBANK e do IFOOD PAGO não funcionam com a versão do IOS26. Está me causando muitos contra tempos… O que devo fazer!?

Over the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt remotectl_dumpstate.txt assetsd.diskwrites_resource-2025-06-25-221428.json

Hi, I have an iPhone 15 Pro Max, model A2849, which according to Apple’s official specifications, supports eSIM. However, in the settings, there is no visible option to add an eSIM (see attached screenshot). There is no “Add Cellular Plan” or any other eSIM-related menu. I’ve already checked for software updates, restarted the device, and reset the network settings, but the issue remains. Has anyone experienced this issue or knows how to fix it? Thanks in advance for your help!

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm devi management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! !

I’m trying to register an Apple Developer Account for my company. I uploaded all the required documents, but my initial application was rejected, and I was asked to provide notarized translations of my documents. I translated them and submitted everything for review on April 1. After a week without a response, I contacted Apple Support. They replied that the documents had been received and were under review. However, as of today, April 24, my account is still under review. I’ve sent five follow-up emails to Support asking for a status update on my case, but I haven’t received any replies. Has anyone faced a similar situation and could suggest what I can do to get a status update and finally complete the registration? If anyone from Apple Support is reading this, my case number is 20000098634973 and my Enrollment ID is J34432JQFC. Thank you in advance for your help.

When I Installed beta 2 , The multiple columns for widgets disappeared. I want it back ..... Ive tried removing my device in CarPlay under General and adding it again. Didn't work.

In the actual development, I found that I could not complete the setting of my icloud+ customised email domain name SMTP. I tried to configure the SMTP of iCloud custom email according to Apple's document (https://support.apple.com/en-us/102525) but the error I looked through Apple's support file, but I didn't find the specific configuration of iCloud + customised email SMTP.

The latest Beta update 18.5.4 has caused connectivity problems with my car (Skoda Enyaq) whereby there is no connection via Bluetooth or the cars internal WiFi. Also contacts will not download to the care which is very frustrating.

My app works perfectly the first time it is used but when returning to the start after playing the game and playing another it does some random things. I figure it is because the app still retains the previous game in it’s memory allocation? My question is, what is the best way programmatically to have an app start fresh and not have to quit it and open it again?

Hey there, Just writing here to say how I do enjoy the latest update, but I can’t seem to run it on my iPhone 14 Pro well because it tends to overheat. i can deal with the stuttering issues and app crashes, that’s understandable, but for some reason the hardware seem to really heat up after normal use (scrolling on social media platforms). oh also, I do think rolling back your phone‘s software should be a simpler process as well. It’s not impossible, but the demand of a computer in reinstating a previous backup when iCloud backups your device through WiFi seems like a missed opportunity. Okay. Thank you for reading.

I want to install tesseract in order to get OCR feature in ChatGPT. Tesseract install requires the use of HomeBrew on macOS But I am using macOS 15.5 and the version of HomeBrew is not compatible. When tying to install Tasseract, old version of HomeBrew is detected and HomeBrew starts updating automatically. The process goes fine until the download of the jpegsrc.v9d.tar.gz component. SHA256 mismatch is detected and the update process stops. But the downloaded jpegsrc.v9d.tar.gz doesn't seem to be corrupted. Maybe an error of the expected SHA256? Any help is welcome that would enable me to complete the HomeBrew update process. Many thanks in advance for your support. ------------------------------ This is what I get in Terminal: Error: Could not find an SDK that supports macOS 15.5. You may have have an outdated or incompatible CLT. Homebrew found the following SDKs in the CLT install: 10.14 10.15 Please update CLT or uninstall it if no updates are available. Error: Git must be installed and in your PATH! Warning: Sorry, Homebrew does not support your computer's CPU architecture! Warning: You are using macOS 15.5. We do not provide support for this pre-release version. You will encounter build failures with some formulae. Please create pull requests instead of asking for help on Homebrew's GitHub, Discourse, Twitter or IRC. You are responsible for resolving any issues you experience while you are running this pre-release version. ==> Downloading https://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/ff08930ce8165de0173c4a8704a407636908779978246b3116202642460aca15--autoconf-2.69.tar.gz ==> Downloading https://ftp.gnu.org/gnu/autoconf-archive/autoconf-archive-2019.01.06.tar.xz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/dca2c1298b729faa88ef51d6d6218fb82ed143da108475073e0c0a9bfae091c6--autoconf-archive-2019.01.06.tar.xz ==> Downloading https://ftp.gnu.org/gnu/automake/automake-1.16.2.tar.xz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/de80077d29bb43dc673536d714b2345d6a9753a170151e730bccf02f102ecf57--automake-1.16.2.tar.xz ==> Downloading https://github.com/Homebrew/formula-patches/raw/e5fbd46a25e3566305929683356 Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/5a220d4e315a1ffbc9644d2bf91fe956c5a84a11689cbb8da50106ad3b71c48f--dynamic_lookup-11.patch ==> Downloading https://ftp.gnu.org/gnu/libtool/libtool-2.4.6.tar.xz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/a7871392bebba3d24e9db265409485330a2e81ca638579ca84ff5bf9f9040666--libtool-2.4.6.tar.xz ==> Downloading https://pkgconfig.freedesktop.org/releases/pkg-config-0.29.2.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/5bdbf3b3fdadaf72744884b98b74a2ff887bd63a20b246f811a222a146ad7b64--pkg-config-0.29.2.tar.gz ==> Downloading https://sourceforge.net/p/giflib/bugs/_discuss/thread/4e811ad29b/c323/attac Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/96a5fa155b0ad1a98cc4d577b7806eedfadcde973df641a6e90cf257b08e3598--Makefile.patch ==> Downloading https://downloads.sourceforge.net/project/giflib/giflib-5.2.1.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/516725ea41ab2e3e2e554c736ec0ef0e0d7fcb52e597a831e2398422843276bd--giflib-5.2.1.tar.gz ==> Downloading https://www.ijg.org/files/jpegsrc.v9d.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/23faa446d5ad2c8f0a288f26af4c4f70666394f107eb58154ab432da5f6705d1--jpegsrc.v9d.tar.gz Error: SHA256 mismatch Expected: 99cb50e48a4556bc571dadd27931955ff458aae32f68c4d9c39d624693f69c32 Actual: 2303a6acfb6cc533e0e86e8a9d29f7e6079e118b9de3f96e07a71a11c082fa6a Archive: /Users/bertrand/Library/Caches/Homebrew/downloads/23faa446d5ad2c8f0a288f26af4c4f70666394f107eb58154ab432da5f6705d1--jpegsrc.v9d.tar.gz To retry an incomplete download, remove the file above.

I‘m getting tired of having to reinstall apps because of the amount of datas. I deleted alot of photos. Deleted apps. The thing that gets my storage full is the System data. I searched up for tutorials, it was full with clearing safari history or deleting old messages, offloading apps. I did them all, none of them decreased my system data and its at 12GB while my phone‘s GB is only up to 64GB. I use IOS 16 Iphone 11. Can someone help?

If I have, say a doctor appointment in the Calendar app, and I'm leaving to go to it, the address will appear in Apple Maps on CarPlay. Forgive if I'm getting the details wrong, but I believe if I bring up the Map, it will be available to tap on, so I can quickly go there. I think it may also show up on one on the car-play screens that shows a few different panels.

I use DeviceActivityCenter to monitor app usage. For DeviceActivityEvent, I set 30 events, and the threshold of each event increases by 2 minutes: var events: [DeviceActivityEvent.Name: DeviceActivityEvent] = [:] for index in 0..<30 { let threshold = (index == 29) ? DateComponents(hour: 1) : DateComponents(minute: (index + 1) * 2) let name = DeviceActivityEvent.Name("\(prefix)|\(index)") events[name] = DeviceActivityEvent(applications: tokens, threshold: threshold) } After reaching the last DeviceActivityEvent, I will restart directly in DeviceActivityMonitor private func restartMonitoring(activity: DeviceActivityName) { let center = DeviceActivityCenter() let currentEvents = center.events(for: activity) do { try center.startMonitoring(activity, during: schedule, events: currentEvents) } catch { print("Fail: \(error)") } } But I found that after restarting, DeviceActivityEvent will be automatically executed even if I don't use the app. My iOS version is 18.5

My imessage has been acting up for 1 month now. It fails to activate my phone number and prefers my email. This is a beta issue Apple support has told me and it needs fixing asap.

Is anyone else having trouble posting to the forums? I can't get past form validation.