Is it possible to pay for a Apple Developer membership with a managed Apple ID as the account holder?

The iPhone XS Max and Garmin watch pairing cannot use BLE to send Scan Response; it can only send BLE advertisements. May I ask if this is a limitation of the Apple system? So far, we have tested several iPhone models, and only the iPhone XS Max has this issue. We are not sure if other untested models have the same problem.

I was searching for demo code from WWDC 2015 (Maze: Getting Started with GamePlayKit). Turns out, Apple remove the project from their website. But I finally found the project on my Mac because I must have downloaded it in the past. Does anyone know if I'm allowed to put that project to a public GitHub page without any modifications? Has anyone of you experience with this? I think it's really bad that Apple is removing those old projects. And as this particular project is in ObjC it compiles with only minor adjustments.

Hi! Just downloaded the IOS 26 beta software to my Iphone 15 128gb and during the second phase of installation of the update (when the phone start rebooting a few time) my iphone showed the display of low battery with the time displayed on the top left corner of the screen, even though my Iphone was pluged in during the full time of the install and had more than 50% of battery before launching the installation. So far-here is what i know: I wouldn't be able to confirm if the install was successfull or not i tried forced reboot a few time but i keep landing on the low battery page some other people are experiencing the same problem as i am as i could confirm on the reddit dedicated to the IOS26beta page

So I downloaded and installed iOS26 on my iPhone 15 Pro and after that it does not want to boot anymore. It shows a battery with one red line. Which is weird because before it restarted it had 80% of the battery and I had the power cable connected at all time. Now I can't boot it up anymore. Not even with the volume button up, down, power button trick. Please help!

I just downloaded ios 26 atm i was upgrading my phone battery was 50% and charging , now when i fully installated ios 26 it shows battery 1% and even i try to charge it still stays at 1% any idea how to fix it

Yo i installed IOS 26 Beta to see how it is, and I want it to downgrade but Checking for Updates are unavailable and my iPhone 14 Pro is lagging i have 20-30 fps or something like that. And these Icons don’t wanna talk about it 🙏

Hi everyone 👋, I’m new to the Apple Developer Forums and just getting started with building apps for iOS/macOS. I’ve explored the documentation but wanted to introduce myself and ask for some advice from experienced developers. Currently working on: An iOS app using SwiftUI Learning more about integrating Sign in with Apple Exploring best practices for App Store submission Here’s what I’d like to know: What is the recommended approach to saving minimal app state before termination? Are there SwiftUI lifecycle metho18336114753ds or SceneDelegate hooks I should be aware of? Is UserDefaults the best tool for small state preservation in this context? Would love to hear from anyone who’s implemented sim18336114753ilar behavior — even a high-level suggestion would help. Thanks! Harjeet Singh

Every time I go into the iOS software update settings to make sure my iPhone is fully updated to iOS 26, I keep getting an error message that says unable to check for update, an error occurred while checking for a software update. Please fix this bug?

I'm currently trying the traditional mode on the latest beta and the slide-over and the traditional splitview is not available, I would like to ask if it's completely removed or just a minor bug because my automation app rely heavily on this old two feature

Hi all, I’m running into a persistent build issue with my Swift project ORSOFINAL after migrating from Xcode stable to Xcode-beta.app (June 2025 version). ⸻ 💥 Errors displayed: 1. C99 was enabled in PCH file but is currently disabled 2. module file .../ModuleCache.noindex/SwiftShims-AXUM98L131W4...pcm cannot be loaded due to a configuration mismatch with the current compilation 3. missing required module 'SwiftShims' ⸻ 🛠 What I’ve already tried: • xcode-select -s /Applications/Xcode-beta.app/Contents/Developer • Deleted ~/Library/Developer/Xcode/DerivedData, ModuleCache.noindex, Archives, and Products • Ran sudo xcodebuild -runFirstLaunch • Clean Build Folder in Xcode-beta • Verified Command Line Tools setting points to Xcode-beta ⸻ ❓Looking for guidance on: • Whether this is a known bug in Xcode-beta • If SwiftShims/PCM conflicts are expected between versions • Best practices to safely migrate from Xcode stable to beta for Swift-based projects Any advice is much appreciated. Thanks, Mathéo

Today I updated to iOS 26 and after changing to clear mode nothing happens, the icons remain a solid color, everything remains a solid color, nothing is transparent.

An error occurred while checking for a software update after the iOS 26 update. Is anyone else facing a similar issue?

Hello, I'm experiencing issues with multiple apps on macOS related to network-related tasks. FIrst, I had problems with the network filter on Avast security. It told me to allow net work filtering, so I pressed the popup button that said allow filtering, but did nothing and gave me a error. Later on, on Nord VPN didnt work aswell, when I had to grant permission to configure a VPN. It didn't even give me a description of the error, just said something went wrong. I contacted NordVPN support, which didnt do anything exept for telling me to uninstall avast and restart my mac, which I did but was useless. Please help me.

Hey, I cant can update or downgrade to a newer Version like IOS18.5 Can someone help me? And will Apple fix that?

I’m running macOS 26 Beta 1 (build 25A5279m) on a 2019 Mac Pro (MacPro7,1) with a single 4K display connected via HDMI. Whenever I attempt to launch Finder, WindowServer immediately aborts and the machine reboots. Crash details: Process: WindowServer (PID 1441) Exception: EXC_CRASH (SIGABRT) triggered in thread 0 (ws_main_thread) Termination Reason: Abort trap: 6 Backtrace highlights: CA::OGL::MetalContext::draw(MTLPrimitiveType, …) hits an internal __assert_rtn in libsystem_c.dylib Subsequent calls all stem from QuartzCore’s OpenGL/Metal bridge (CA::OGL::render_layers, LayerNode::apply, etc.) Related threads: Thread 2 (com.apple.coreanimation.render-server) idle in mach_msg_overwrite Thread 1 shows AmbientDisplay and ColorSync callbacks running Hardware/Software: MacPro7,1 (2019) macOS 26.0 Beta 1 (25A5279m) 4K monitor via HDMI System Integrity Protection enabled What I’ve tried so far: Safe-boot (crash still occurs) Switching display profiles in System Settings → Displays → Color (no effect) Happy to provide any additional logs or verbose console output. Let me know if there’s any other data that would help diagnose the Metal/OpenGL integration issue in this beta.

After updating to iPad iOS26 , the software update area shows that it cannot check for updates. Is this normal?

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

I have created an app and for the final stage i added subscription feature. This works great in testflight, but not when i push out to external testers. I set up what i needed to in apple store connect (i must have done it right as it works in testflight), and i linked it to th emost recent version. Nothing I do seems to get the sub info to display and pull through to the app in the sub box when selected. No price and the usual stuff. I was told send for review. Failed the review and im working on that but something tell sme this is a glitch athat needs fixed on my account maybe. Can anyone help please

Hey there, I recently updated my iPhone to the iOS 26 developers beta version, and I’m encountering an issue on the Software Update page. It says “Unable to check for updates,” and I’m unable to revert to iOS 18. Is this a temporary problem? Will I be able to update my iPhone in the future without needing to reset it? Thanks