Hi everyone, I’m currently using the visionOS Enterprise APIs, and I noticed in the official documentation that: However, I couldn’t find any clear instructions on how to actually renew the license. What is the correct process to renew a visionOS Enterprise API license? Do I need to submit a new entitlement request again to renew? Is there any official step-by-step guide or documentation for renewal? Any advice or shared experience would be greatly appreciated 🙏 Thank you!

I first started using the SwiftUI pushWindow API in visionOS 26.2, and I've reported several bugs I discovered, listed below. Under certain circumstances, pushed window relationships may break, and this behavior affects all other apps, not just the app that caused the problem, until the next device reboot. In other cases, the system may crash and restart. (FB21287011) When a window presented with pushWindow is dismissed, its parent window reappears in the wrong location (FB21294645) Pinning a pushed window to a wall breaks pushWindow for all other apps on the system (FB21594646) pushWindow interacts poorly with the window bar close app option (FB21652261) If a window locked to a wall calls pushWindow, the original window becomes unlocked (FB21652271) If a window locked in place calls pushWindow and the pushed window is closed, the system freezes (FB21828413) pushWindow, UIApplication.open, and a dismissed immersive space result in multiple failures that require a device reboot (FB21840747) visionOS randomly foregrounds a backgrounded immersive space app with a pushed window's parent window visible instead of the pushed window (FB21864652) When a running app is selected in the visionOS home view, windows presented with pushWindow spontaneously close (FB21873482) Pushed windows use the fixed scaling behavior instead of the dynamic scaling behavior I'm posting the issues here in case this information is helpful to other developers. I'd also like to hear about other pushWindow issues developers have encountered, so I can watch out for them. Questions: I've discovered that some of the issues above can be partially worked around by applying the defaultLaunchBehavior and restorationBehavior scene modifiers to suppress window restoration and locking, which pushWindow appears to interact poorly with. Are there other recommended workarounds? I've observed that the Photos and Settings apps, which predate the pushWindow API, are not affected by the issues I reported. Are there other more reliable ways I could achieve the same behavior as pushWindow without relying on that API? I'd appreciate any guidance Apple engineers could provide. Thank you.

After I updated to visionOS 26.4, I noticed my website environment would suddenly turn off occasionally while I was watching YouTube in Safari. My M2 AVP was still warm after the update. Is turning off a website environment expected behavior when the headset gets warm (e.g., perhaps to reduce load)? If not, anyone have an idea this might happen?

After updating to visionOS 26.4, I went to Safari's Feature Flags page to reenable Website environment, and I found the Website environment switch had been moved from the top and into the list of switches below. In its place is "Immersive API". I could not find any documentation on this. Anyone know what it is for or can point me to documentation?

Hi, I'm experiencing an issue where all RealityView content disappears when the user selects "Lock In Place" from the window management menu (long press on close button). "Follow Me" works correctly and this happens in Testflight builds only not reproducible when I run locally I have reproduced this with a minimal project containing nothing but a simple red cube — no custom anchors, no app state, no dependencies. Steps to Reproduce: Open an ImmersiveSpace. A red cube is placed 1m in front of the user via RealityView. Long press the X button on any floating window Select "Lock In Place". The cube disappears immediately. Expected: Cube remains visible after window is locked Actual: Cube disappears. Minimal reproducible code: var body: some View { RealityView { content in let cube = ModelEntity( mesh: .generateBox(size: 0.3), materials: [SimpleMaterial(color: .red, isMetallic: false)] ) cube.setPosition(SIMD3<Float>(0, 1.5, -1), relativeTo: nil) content.add(cube) } } } Device: Apple Vision Pro visionOS version: Vision OS 26.2 (23N301) Xcode version: Version 26.3 (17C529) Is this a known issue? Is there a recommended workaround to preserve RealityView content during Lock In Place transitions? Thank you!

Environment: Device: Apple Vision Pro visionOS: 26.3.1 Xcode: 26.2 (17C52) Sample: Creating an interactive 3D model in visionOS Repro steps: Build and run the official sample from Xcode Confirm the car model displays correctly Quit the app Relaunch the app from Home Observe that the official car model no longer appears / fails to restore correctly Expected: The official car model should display normally after relaunching from Home Actual: The sample works when launched from Xcode, but fails when relaunched from Home

I’m trying to build a persistent world map of my college campus using ARKit, but it’s not very reliable. Anchors don’t consistently appear in the same place across sessions. I’ve tried using image anchors, but they didn’t improve accuracy much. How can I create a stable world map for a larger area and reliably relocalize anchors? Are there better approaches or recommended resources for this?

My visionOS 26.3 app displays a diorama-like scene in a RealityView in a mixed immersive space, about 1 meter square, with view attachments floating above the scene. Each view attachment fades out after user interaction, by animating the view's opacity. What I'm observing is that depending on the position of a view attachment relative to the scene and the camera, an unwanted cutout effect is observed (presumably because of draw order issues), as shown in the right column in the screenshots below. YouTube video link of these sequences: https://youtu.be/oTuo0okKCkc (19 seconds) My question: How does visionOS determine the view attachment draw order relative to the RealityView scene? If I better understood how the draw order is determined, I could modify my scene to ensure that the view attachments were always drawn after the scene, fixing the unwanted cutout effect. I've successfully used ModelSortGroupComponent to control the draw order of entities within the RealityView scene, but my understanding is that this approach cannot be used with view attachments. I've submitted FB22014370 about this issue. Thank you.

Hello, I know that Apple bans user from accessing to raw gaze data like gaze vector (x,y,z) or eye position. But when you do research on gaze data, how did you collect them from vision pro? Is there any App to solve this problem?

I am using RoomCaptureView for house scanning and modeling On the latest iOS 26, the following issues were encountered The program runs well on iOS 26 and below, but on iOS 26 and above, the probability of scene localization failure becomes abnormally high, and accurate indoor localization cannot be obtained. Additionally, the probability of using RoomBuilder to merge models is also high After compiling the program using xcode 26 or above, a necessary bug appeared when running it on iOS 26, RoomCaptureView is completely unable to run The error message is {RoomCaptureSession. Capture Error's' Internal error '} And the camera interface of RoomCaptureView has turned into a splash screen Another Debug error occurred:{ -[MTLDebugRenderCommandEncoder validateCommonDrawErrors:]:5970: failed assertion `Draw Errors Validation Fragment Function(realitykit::fsSurfaceShadow): incorrect type of texture (MTLTextureType2D) bound at Texture binding at index 14 (expect MTLTextureType1D) for tonemapLUT[0]. } When using programs compiled under xcode 26 and running on iOS 26, this issue will not occur

Hi, I'm running the Spatial Rendering App sample on a Macbook Pro running 26.4 Beta and the Vision Pro running visionOS 26.3.1. Handoff and SharePlay are on, both devices are on the same Apple ID and network, and SharePlay screen sharing works fine between the two devices. However, when calling openImmersiveSpace, the device picker fails to present and no devices are found. Errors from console: ((processConfiguration != nil && configuration != nil) || (processConfiguration == nil && configuration == nil)) - .../ExtensionKit/Source/HostViewController/Internal/EXHostSessionDriver.m:80: `processConfiguration` and `configuration` must be both non-nil or both nil Unable to obtain a task name port right for pid 638: (os/kern) failure (0x5) Unable to present an ImmersiveSpace for Scene id 'Compositor Services' Is this a known bug or I'm I missing something? Thanks!

Thank you again for pushing the web forward in VisionOS 2, super exciting! The latest WWDC24 video touched on VR experiences for VisionOS2.0 using WebXR, however there was no mention of passthrough AR experiences. Samples such as this one are not supported: https://immersive-web.github.io/webxr-samples/immersive-ar-session.html In Settings > Safari, there is a feature flag for the AR WebXR module, but enabling it did not seem to change anything. Is this the expected behavior at this time? Any developer preview(s) we could try?

I'm experiencing an issue where all RealityView content disappears when the user selects "Lock In Place" from the window management menu (long press on close button). "Follow Me" works correctly and this happens in Testflight builds only not reproducible when I run locally I have reproduced this with a minimal project containing nothing but a simple red cube — no custom anchors, no app state, no dependencies. Steps to Reproduce: Open an ImmersiveSpace A red cube is placed 1m in front of the user via RealityView Long press the X button on any floating window Select "Lock In Place" The cube disappears immediately Expected: Cube remains visible after window is locked Actual: Cube disappears. Note: "Follow Me" does NOT reproduce this issue. Minimal reproducible code: struct ImmersiveView: View { var body: some View { RealityView { content in let cube = ModelEntity( mesh: .generateBox(size: 0.3), materials: [SimpleMaterial(color: .red, isMetallic: false)] ) cube.setPosition(SIMD3(0, 1.5, -1), relativeTo: nil) content.add(cube) } } } Device: Apple Vision Pro visionOS version: Vision OS 26.2 (23N301) Xcode version: Version 26.3 (17C529) Is this a known issue? Is there a recommended workaround to preserve RealityView content during Lock In Place transitions? Thank you!

Use case proposal: immersive mental visualisation and manifestation experiences on visionOS I'd like to open a discussion around a use case I believe is currently missing from the visionOS ecosystem

When using the new RealityKit Manipulation Component on Entities, indirect input will never translate the entity - no matter what settings are applied. Direct manipulation works as expected for both translation and rotation. Is this intended behaviour? This is different from how indirect manipulation works on Model3D. How else can we get translation from this component? visionOS 26 Beta 2 Build from macOS 26 Beta 2 and Xcode 26 Beta 2 Attached is replicable sample code, I have tried this in other projects with the same results. var body: some View { RealityView { content in // Add the initial RealityKit content if let immersiveContentEntity = try? await Entity(named: "MovieFilmReel", in: reelRCPBundle) { ManipulationComponent.configureEntity(immersiveContentEntity, allowedInputTypes: .all, collisionShapes: [ShapeResource.generateBox(width: 0.2, height: 0.2, depth: 0.2)]) immersiveContentEntity.position.y = 1 immersiveContentEntity.position.z = -0.5 var mc = ManipulationComponent() mc.releaseBehavior = .stay immersiveContentEntity.components.set(mc) content.add(immersiveContentEntity) } } }

Is it possible to retrieve the position and orientation of a window that is opened in an immersive space? The following code: struct MyWindow: View { var body: some View { VStack { Text("Hello") } .onGeometryChange3D(for: Point3D.self) { proxy in try! proxy .coordinateSpace3D() .convert(value: Point3D.zero, to: .worldReference) } action : { point in print(point) } } } seems to work for the position, but I also need the orientation.

This is a very exciting feature in 26.4 beta. But from the document, it seems can only integrate with NVIDIA CloudXR™ SDK. I'm wondering if it's possible to use this tool to stream immersive video from Mac to Vision Pro?

Hello, I was wondering how I can initialize an ImageAnchoringSource using https://developer.apple.com/documentation/realitykit/anchoringcomponent/imageanchoringsource/init(_:) When I construct one using a URL, it doesn't seem to be tracked and I see in the following when I debug print the component: ▿ 0 : AnchoringComponent ▿ target : Target ▿ referenceImage : 1 element ▿ from : ImageAnchoringSource ▿ url : Optional<URL> ▿ some : file:///var/mobile/Containers/Data/Application/D1126EA0-A1D7-468F-A40C-8578B7F5BDDF/Library/Caches/CodeCache/0E457AA7-2195-48B9-9DD4-58CEB9397F69.png - _url : file:///var/mobile/Containers/Data/Application/D1126EA0-A1D7-468F-A40C-8578B7F5BDDF/Library/Caches/CodeCache/0E457AA7-2195-48B9-9DD4-58CEB9397F69.png - _parseInfo : nil - _baseParseInfo : nil - name : nil - group : nil ▿ trackingMode : TrackingMode - trackingMode : 2 Is there a specific format for the parseInfo? When I use the same image to make an image anchoring source by group and name in AR Resources, it is tracked. Thank you!

Hi, I would like clarification on whether the new hover effects feature introduced in vision os 26 supported pinch gestures through the psvr 2 controllers. In your sample application, I found that this was not working. Pulling the trigger on the controller whilst looking at the 3d object did not activate the hover effect spatial event in the sample application. (The object is showing the highlight though), only pinch clicking with my fingers seem to be registering/triggering the spatial event. I am using Vision OS 26.3 This is inconsistent with how the psvr2 controller behaves on swift ui views and ui view elements, where the trigger press does count as a button click. The sample I used was this one: https://developer.apple.com/documentation/compositorservices/rendering_hover_effects_in_metal_immersive_apps

Hi, Is there a resource or sample code about how to draw an outline around a mesh in RealityKit? Typically, this is useful for visualizing a selection, like in Reality Composer Pro. How to achieve such effect? A shader material? A post-process effect in ARView or RealityRenderer? Methods such as duplicating the entity mesh, scaling it, and using material.faceCulling = .front did not look good in my experiments. Thank you.