Hi everyone, I’m encountering a critical reliability issue with message passing in my Safari Web Extension on iOS 18.4.1 and iOS 18.5. In my extension, I’m using the standard messaging API. The background script sends a message to the content script using browser.tabs.sendMessage(...), and the content script registers a listener via: browser.runtime.onMessage.addListener(handler); This setup has been working reliably in all prior versions of iOS. However, after updating to iOS 18.4.1 and 18.5, I’ve noticed the following behavior: ✅ The content script is successfully injected, and onMessage.addListener is registered (I see logging confirming this). ✅ The background script sends the message using the correct tabId (also confirmed via logs). ❌ The content script’s onMessage listener is not consistently triggered. ⚠️ This issue is intermittent, sometimes the message is received, sometimes it is silently dropped. ❌ No exceptions or errors are thrown in either script, the message appears to be sent, but not picked up from the content script message listener.

Steps to Reproduce 1. Create a native UIViewController with a WKWebView, loading test-1.html (contains position:fixed header that displays correctly). 2. Push another UIViewController also with a WKWebView, this time loading test-2.html. 3. In test-2.html, tap into the to summon the on-screen keyboard. 4. Without calling blur(), perform an interactive swipe-back gesture to go back to the first view controller. 5. Observe that the fixed header in test-1.html is now offset downward by approximately the height of the keyboard and does not return to its original position. demo-link : https://bugs.webkit.org/attachment.cgi?id=476324

We are currently supporting an Apple Pay-enabled card program as an issuer/issuer processor and have successfully completed In-App Push Provisioning integration within our iOS application. The in-app flow is fully operational, including issuer-side cryptographic exchange and Mastercard MDES network tokenization. We are now looking to extend this integration to support Apple Pay Web Push Provisioning, allowing cardholders to add eligible cards to Apple Wallet directly from our web application. We would appreciate guidance on: -The process for enrolling in Apple Business Register (if required) -Enabling Web Push Provisioning for an issuer profile Required entitlements or provisioning certificates Any additional onboarding steps specific to issuer-level Web provisioning We understand that Web Push Provisioning requires issuer-level enablement beyond standard Apple Pay on the Web, and we would like clarification on the correct path to activate this capability. Thank you in advance for your guidance.

When CHIPS was introduced in 18.4 it worked well, however on 18.5 it does not appear to work. There do not appear to be release notes about this in 18.5, so can someone provide definitive if this is a defect that will be fixed, or have they already been deprecated?

overflow-x: clip; will also apply clipping on the Y-axis. The correct implementation of this should only affect the X-axis. This is correctly implemented in all browsers except for Safari

Hi, after upgrading MacOS (MB Air M1 Version 26.2 (25C56)) & Safari (Version 26.2 (21623.1.14.11.9)) to latest versions, we are experiencing a new bug occurring with our web extension (Click & Read) on local storage writing and getting this error : Invalid call to browser.storage.local.set(). Disk I/O error. This doesn't happen on other browsers (chromium, Firefox). export const setLocalStorage = async (value: object) => { try { await browser.storage.local.set(value); } catch (error) { console.error("[Click & Read] Error setting local storage", error); } };

Hi Apple engineers! We are making an iOS browser and are planing to deliver a feature that allows enterprise customers to use a MAM key to set a PAC file for proxy. It's designed to support unmanaged device so the MDM based solutions like 'Global HTTP Proxy MDM payload' or 'Per-App VPN' simply don't work. After doing some research we found that with WKWebView, the only framework allowed on iOS for web browsing, there's no API for programmatically setting proxy. The closes API is the WKURLSchemeHandler, but it's for data management not network request interception, in other word it can not be used to handle HTTP/HTTPS request well. When we go from the web-view level to the app level, it seems there's no API to let an app set proxy for itself at an app-level, the closest API is Per-App VPN but as mentioned above, Per-App VPN is only available for managed device so we can't use that as well. Eventually we go to the system level, and try to use Network Extension, but there's still obstacles. It seems Network Extension doesn't directly provide a way to write system proxy. In order to archive that, we may have to use Packet Tunnel Provider in destination IP mode and create a local VPN server to loop back the network traffic and do the proxy stuff in that server. In other word, the custom VPN protocol is 'forward directly without encryption'. This approach looks viable as we see some of the network analysis tools use this approach, but still I'd like to ask is this against App Store Review Guidelines? If the above approach with Network Extension is not against App Store Review Guidelines, I have a further question that, what is the NEProxySettings of NETunnelNetworkSettings for? Is it the proxy which proxies the VPN traffic (in order to hide source IP from VPN provider) or it is the proxy to use after network traffic goes into the virtual private network? If none of the above is considered recommended, what is the recommended way to programmatically set proxy on WKWebView on an unmanaged device (regardless of where the proxy runs, web-view/app/system)?

I want to print the content of a WKWebView. I've done some searching, and many people have struggled with this over the years. Some claimed success, but their solutions don't work for me. One person created images for each pages and printed that, but then if you were to print to PDF, you'd get a PDF containing images rather than text. If I just call the printView(_:)) method of the view, I get blank pages. With the following more elaborate code, I get a partial printout, 11 out of what should be about 13 pages. let info = NSPrintInfo.shared info.topMargin = 72.0; info.bottomMargin = 72.0; info.leftMargin = 72.0; info.rightMargin = 72.0; info.isVerticallyCentered = false; info.isHorizontallyCentered = false; info.horizontalPagination = .fit; info.verticalPagination = .automatic; let printOp = webView!.printOperation( with: info ) printOp.canSpawnSeparateThread = true printOp.view?.frame = NSMakeRect( 0, 0, info.paperSize.width, info.paperSize.height ) printOp.runModal(for: webView.window!, delegate: self, didRun: nil, contextInfo: nil ) When I run the above under the debugger, I see console messages saying CGContextClipToRect: invalid context 0x0. Once the print dialog appears, if I touch (but not change) the selected printer, then the page count changes to the correct value.

I'm building a progressive web app (PWA) and came to the conclusion that almost nobody knows that this feature exists - Add to Home Screen. Not many people even understand what a PWA is or that you can add it to the home screen. This feels unnatural compared to installing an app from a store. Why do we make it so hard for users? Could we not make this easier by having the ability to call this installation or show an install notification? Right now, when users visit a PWA on iOS, there's no way for developers to let them know they can install it. The "Add to Home Screen" option is tucked away in the Share menu, and most users never find it. I'd really like to be able to show them a friendly prompt. Comparing to other browsers, this is possible via the beforeinstallprompt event. This would make a huge difference for user experience. Right now the only way is to show iOS users a separate set of instructions with screenshots, which feels clunky compared to what's possible on other platforms. I'm curious - is there any reason why this hasn't been added to Safari yet? Other browsers have supported this for years now. Is there any progress being made on this, or is it being considered for the roadmap? It would be really helpful to know if this is something that will be worked on in the future. I know there's a lot on the roadmap, but this would really help developers create better installation experiences for our users. Thanks for considering this!

I don't think the issue is specific iOS 18. We have a web application that runs with IIS Authentication of Windows and Anonymous. Initially the app opens and the user clicks a button and triggers the "401 Challenge" via ASP.NET. The browser presents the Active Directory login, user enters credentials, clicks Sign In, and the browser hangs (may actually be negotiating something). After a few minutes the user is logged into the application. We have done a number of google searches/AI to try to determine what to change and there is no clear solution. Is there anything else to try? This problem is not seen in Chrome on iOS or on a Windows machine. Strangely it is also not seen using BrowserStack with one of their "real" devices. We have other apps that run with just Windows Authorization and this problem is not observed.

Hello, I've got Smart App Banner set up on my website. However, I want to be able to measure the traffic coming from this banner to the app store / app (i.e. measure impressions/downloads). Apple documentation (https://developer.apple.com/help/app-store-connect/view-app-analytics/manage-campaigns/) says you can set up a campaign link and use it in the Smart Banner to track those who download / open the app store page using your smart banner (so that we can get attribution). However, there is no documentation at all in terms of how this should be added to the tag when implementing a Smart App Banner. I've tried so many different variations and none have tracked downloads. This includes a structure based on an example taken from WWDC from a few years back which also did not work. I would appreciate any help!

We’re currently working on an OTT-based application where we integrate Google Ad Manager to serve video ads. As part of the ad experience, users often see a “Learn More” CTA (Call to Action) on these ads. As per our current requirement, when a user taps “Learn More” on an ad: • The link should open in Safari (i.e., an external browser) on iOS devices • The Safari browser should ideally open in portrait orientation, as the ad content and layout are optimised for portrait mode However, based on our understanding and technical constraints on iOS, it appears that: • Orientation control is restricted to the app’s own context. • Once Safari is launched via UIApplication.shared.open, we no longer have control over how it behaves in terms of orientation. • iOS system behaviour determines Safari’s orientation based on the device’s physical orientation and Safari’s own internal configuration. Could you please confirm if there’s any supported way (via SDK, deep link config, or otherwise) to enforce portrait orientation in Safari when opening such external URLs from within an iOS app? If this is not technically feasible, we would appreciate any best practices or alternatives you can suggest for ensuring a consistent user experience.

Hello Apple Developer Community, I'm experiencing an issue with PDF link interaction in WKWebView that appears to be specific to iOS 26. Problem Description: I'm loading a PDF in WKWebView.The links may vary widely and are not necessarily DPF, so I need to load them using WKWebView. On iOS versions prior to 26, links within the PDF are clickable and work correctly. On iOS 26, the same links are not clickable (no response when tapped). Expected Behavior: PDF links should remain clickable and functional across all iOS versions. What I've Tried: Tested opening the PDF directly in Safari on iOS 26 - links still not clickable This suggests the issue might be related to changes in the system's PDF rendering engine Reproduction Steps: Load the PDF URL in WKWebView Navigate to page 12 Attempt to tap the link Environment: Test Devices: iPhone 15(26.0 ) / iPhone 16 Pro Max(18.0.1 ) Xcode: 16.2 Questions: Is this an intentional change in iOS 26's PDF handling or WKWebView? If so, is there a new API or configuration to restore link interactivity? Any guidance or suggestions would be greatly appreciated!

Hello, After upgrading to macOS 26.2, I’ve noticed a significant performance regression when calling evaluateJavaScript in an iOS App running on Mac (WKWebView, Swift project). Observed behavior On macOS 26.2, the callback of evaluateJavaScript takes around 3 seconds to return. This happens not only for: evaluateJavaScript("navigator.userAgent") but also for simple or even empty scripts, for example: evaluateJavaScript("") On previous macOS versions, the same calls typically returned in ~200 ms. Additional testing I created a new, empty Objective-C project with a WKWebView and tested the same evaluateJavaScript calls. In the Objective-C project, the callback still returns in ~200 ms, even on macOS 26.2. Question Is this a known issue or regression related to: iOS Apps on Mac, Swift + WKWebView, or behavioral changes in evaluateJavaScript on macOS 26.2? Any information about known issues, internal changes, or recommended workarounds would be greatly appreciated. Thank you. Test Code Swift class ViewController: UIViewController { private var tmpWebView: WKWebView? override func viewDidLoad() { super.viewDidLoad() // Do any additional setup after loading the view. setupUserAgent() } func setupUserAgent() { let t1 = CACurrentMediaTime() tmpWebView = WKWebView(frame: .zero) tmpWebView?.isInspectable = true tmpWebView?.evaluateJavaScript("navigator.userAgent") { [weak self] result, error in let t2 = CACurrentMediaTime() print("[getUserAgent] \(t2 - t1)s") self?.tmpWebView = nil } } } Test Code Objective-C - (void)scene:(UIScene *)scene willConnectToSession:(UISceneSession *)session options:(UISceneConnectionOptions *)connectionOptions { NSTimeInterval startTime = [[NSDate date] timeIntervalSince1970]; WKWebView *webView = [[WKWebView alloc] init]; dispatch_async(dispatch_get_main_queue(), ^{ [webView evaluateJavaScript:@"navigator.userAgent" completionHandler:^(id result, NSError *error) { NSTimeInterval endTime = [[NSDate date] timeIntervalSince1970]; NSLog(@"[getUserAgent]: %.2f s", (endTime - startTime)); }]; }); }

I'm a web developer of WebRTC based web app for video and audio calls. After updating to iOS 26.1 beta I noticed, that my app can't use microphone anymore. When I'm calling to getUserMedia with audio set to true, Safari returns error "No AVAudioSessionCaptureDevice device". Other WebRTC demo apps also can't access microphone on this firmware. And maybe it's connected somehow, but safari can't detect connected AirPods Pro 2 as an input device. So, this bug brakes any WebRTC app, that uses microphones.

The issue of fixed elements with { bottom: 0 } moving up when scrolling still persists. It seems to be a general issue with the IOS 26 release. It affects other browser too. I tested on browsers such as Safari, Chrome, Firefox, Edge and Bravo. With the exception of Edge, all the others display the behavior. Device: iPhone 15 Pro IOS Version: 26.0.1

I'm building a Capacitor iOS app with a plain <video> element playing an MP4 file inline. I want Picture-in-Picture to activate automatically when the user goes home — swipe up from the bottom edge of the screen (on an iPhone with Face ID) or press the Home button (on an iPhone with a Home button). Fullscreen → background works perfectly — iOS automatically enters Picture-in-Picture. But I need this to work from inline playback without requiring the user to enter fullscreen first. Setup <video id="video" playsinline autopictureinpicture controls src="http://podcasts.apple.com/resources/462787156.mp4"> </video> // AppDelegate.swift let audioSession = AVAudioSession.sharedInstance() try? audioSession.setCategory(.playback, mode: .moviePlayback) try? audioSession.setActive(true) UIBackgroundModes: audio in Info.plist allowsPictureInPictureMediaPlayback is true (Apple default) iOS 26.3.1, WKWebView via Capacitor What I've tried 1. autopictureinpicture attribute <video playsinline autopictureinpicture ...> WKWebView doesn't honor this attribute from inline playback. It only works when transitioning from fullscreen. 2. requestPictureInPicture() on visibilitychange document.addEventListener('visibilitychange', () => { if (document.visibilityState === 'hidden' && !video.paused) { video.requestPictureInPicture(); } }); Result: Fails with "not triggered by user activation". The visibilitychange event doesn't count as a user gesture. 3. webkitSetPresentationMode('picture-in-picture') on visibilitychange document.addEventListener('visibilitychange', () => { if (document.visibilityState === 'hidden' && !video.paused) { video.webkitSetPresentationMode('picture-in-picture'); } }); Result: No error thrown. The webkitpresentationmodechanged event fires with value picture-in-picture. But the PIP window never actually appears. The API silently accepts the call but nothing renders. 4. await play() then webkitSetPresentationMode document.addEventListener('visibilitychange', async () => { if (document.visibilityState === 'hidden') { await video.play(); video.webkitSetPresentationMode('picture-in-picture'); } }); Result: play() succeeds (audio resumes in background), but PIP still doesn't open. 5. Auto-resume on system pause + PIP on visibilitychange iOS fires pause before visibilitychange when backgrounding. I tried resuming in the pause handler, then requesting PIP in visibilitychange: video.addEventListener('pause', () => { if (document.visibilityState === 'hidden') { video.play(); // auto-resume } }); document.addEventListener('visibilitychange', () => { if (document.visibilityState === 'hidden' && !video.paused) { video.webkitSetPresentationMode('picture-in-picture'); } }); Result: Audio resumes successfully, but PIP still doesn't open. 6. Native JS eval from applicationDidEnterBackground func applicationDidEnterBackground(_ application: UIApplication) { webView?.evaluateJavaScript( "document.querySelector('video').requestPictureInPicture()" ) } Result: Same failure — no user activation context. Observations The event order on background is: pause → visibility: hidden webkitSetPresentationMode reports success (event fires, no error) but the PIP window never renders requestPictureInPicture() consistently requires user activation, even from native JS eval Audio can be resumed in background via play(), but PIP is a separate gate Fullscreen → background automatically enters Picture-in-Picture, confirming the WKWebView PIP infrastructure is functional Question Is there any way to programmatically enter PIP from inline playback when a WKWebView app goes to background? Or is this intentionally restricted by WebKit to fullscreen-only transitions? Any pointers appreciated. Thanks!

This is my first post, so please forgive me if it is to the wrong area. I've been using Tahoe for a few days and, overall, it's very stable. But the one thing that has bothered me to no end is Safari's new behavior with respect to its header (Address bar, Favorite bookmarks bar, tab bar) background color. The web content of the active tab seems to affect everything - and oftentimes makes things completely unreadable - at least in "Dark" mode. For instance, if a web page uses a white background, the Favorites bookmark labels are the same color as the bookmark background, so reading the labels is simply impossible. At other times, they're just very difficult to read. Similarly, it is almost always impossible to tell which tab is the active one - my only workaround is to try 100% brightness....or to just guess. When Apple previously experimented with letting content bleed through to the top, there was a setting for stopping it - but I don't see such a setting anymore. Do you you know of any way to stop this effect?

Hi everyone, I'm exploring the new app icon appearance options (Clear, Dark, Tinted) for Progressive Web Apps (PWAs) on iOS26, iPadOS26, and macOS26. Currently, PWA icons don't seem to render well with these new appearances, particularly in Clear and Tinted modes, resulting in very very poor visual quality. You can hardly see anything. Has support for these icon appearances been fully implemented for PWAs? If so, could someone point me to the relevant Apple Developer documentation or provide guidance on how to configure PWA icons to support Clear, Dark, and Tinted appearances? I've searched the Apple Developer Forums, Stack Overflow, and Reddit but haven't found clear information on this topic.A possible solution is a png file with transparent areas, but if the pattern is dark, nothing will be visible in dark mode. Any insights or resources would be greatly appreciated. Thanks! (plz don't give up on PWA😭) Reference: https://developer.apple.com/forums/thread/761615 https://stackoverflow.com/questions/78780916/is-there-a-way-to-provide-light-dark-and-tinted-variants-of-apple-touch-icon https://developer.apple.com/library/archive/documentation/AppleApplications/Reference/SafariWebContent/ConfiguringWebApplications/ConfiguringWebApplications.html

I'm testing web extension to safari on iOS. I've built and added extension application to simulator, but on safari settings shows no extensions. I'm using Xcode 16.3 beta 2 with Simulator iOS 18.4 (22E5216h), tested on iPhone 16. https://app.screencast.com/oUq4EMonmfT7u https://app.screencast.com/MCquvHzmZi8QS