«Hello everyone, after installing iOS 26, I noticed that on my iPhone 13 Pro, which had its battery replaced, the battery status in the settings shows 0%, and the phone does not charge more than 1%, no matter how long I leave it plugged in. The same problem is observed on iPhones 14 and lower where the battery (FB18154101) was replaced.»

Since updating to iOS 18.4 the auto-lock on iPhone 16 Pro isn’t functioning. All settings remain unchanged from previous versions, however the display will not turn off. Same iOS on my older iPhone 11 doesn’t have the issue and screen turns off as usual with the same system settings. Have tried a force restart on the 16 Pro, nothing changed. Any ideas?

Hello, Can anyone tell me what this means? Or if it's normal? I'm seeing about 10% battery drain per day on sleep, and pmset -g log shows wakes nearly every minute. 2025-06-10 17:10:35 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 5 secs 2025-06-10 17:10:43 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:13:49 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 8 secs 2025-06-10 17:14:01 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:14:10 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:15:01 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:16:31 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:18:07 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs Looking at one section of them: 2025-06-10 22:00:46 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:90%) 6 secs 2025-06-10 22:00:46 -0700 WakeDetails DriverReason:smc.70070000 - DriverDetails: DriverReason:wifibt - DriverDetails: DriverReason:SMC.OutboxNotEmpty - DriverDetails: 2025-06-10 22:00:46 -0700 HibernateStats hibmode=3 standbydelaylow=0 standbydelayhigh=0 35177 2025-06-10 22:00:46 -0700 WakeTime WakeTime: 0.094 sec 2025-06-10 22:00:46 -0700 Kernel Client Acks Delays to Sleep notifications: [Port-USB-C driver is slow(msg: SetState to 0)(60 ms)] 2025-06-10 22:00:46 -0700 Kernel Client Acks Delays to Wake notifications: [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(121 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(59 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(120 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(123 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(116 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [powerd is slow(5915 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(64 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(119 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(122 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(117 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(76 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(76 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(119 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: DidChangeState to 1)(76 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(121 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(58 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(117 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(76 ms)] 2025-06-10 22:00:48 -0700 com.apple.sleepservices.sessionTerminated SleepService: window has terminated. 2025-06-10 22:00:52 -0700 Assertions PID 323(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:05 id:0x0xd00009032 [System: PrevIdle] 2025-06-10 22:00:52 -0700 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using Batt (Charge:90%) 14 secs 2025-06-10 22:00:53 -0700 Assertions Summary- [System: PrevIdle] Using Batt(Charge: 90) 2025-06-10 22:00:53 -0700 Wake Requests [process=mDNSResponder request=Maintenance deltaSecs=6474 wakeAt=2025-06-10 23:48:48 info="DHCP lease renewal"] [*process=dasd request=SleepService deltaSecs=979 wakeAt=2025-06-10 22:17:13 info="com.apple.dasd:501:com.apple.intelligenceplatform.IntelligencePlatformCore.Pipeline.FastPass"] [process=powerd request=TCPKATurnOff deltaSecs=227969 wakeAt=2025-06-13 13:20:22] [process=powerd request=CSPNEvaluation deltaSecs=2005 wakeAt=2025-06-10 22:34:18] [process=powerd request=UserWake deltaSecs=7086 wakeAt=2025-06-10 23:59:00 info="com.apple.alarm.user-visible-com.apple.donotdisturb.server.ScheduleLifetimeMonitor.timer,619"]

After the last OS26 developer beta update the watch series 6 battery drains fast, in less than two hours life. I visited Apple Store , they said the battery was dead so I had to buy new watch series 10 The same issue happened in the new watch, the battery meter shows 50% after 1 hour Right now I’ve downgraded my update version to beta 11 until I can find a solution

Hello everyone, on August 31st, all the apps in my personal developer account were suddenly expired and deleted, I have not received any response from Apple. My apps are in compliance with Apple's policies. I then uploaded a new version and sent it to the review team, but I received the following error "There was an error processing your request. Please try again later." I have contacted Apple via Email and Phone but no one cares about my problem. Has anyone had the same situation as me, I am really worried.

I have developed three apps using the Screen Time API. The following are common problems I encountered in the three apps: DeviceActivityMonitorExtension is automatically killed after running for a few days (frequently) The same DeviceActivityEvent in DeviceActivityMonitorExtension is triggered twice during eventDidReachThreshold (especially obvious in iOS18.5) Screen Time authorization is automatically canceled for no reason (occasionally) I hope to get help

I'm suddenly receiving zero products from SKProductsRequest, even though this setup previously worked without issues. The debugger shows that both of my product identifiers are now being returned under invalidIdentifiers, and response.products is empty. I’ve confirmed the following: There are no pending agreements in App Store Connect. The subscription is active and configured correctly. The product identifiers match exactly with what’s defined in App Store Connect. Here is the delegate method I'm using (unchanged from when it previously worked): extension UpgradeViewModelProvider: SKProductsRequestDelegate { func productsRequest(_ request: SKProductsRequest, didReceive response: SKProductsResponse) { if response.products.count > 0 { delegate.send(.onProduct(response.products)) } } } Since everything was functioning before, I’m trying to understand what may have caused the identifiers to suddenly be marked as invalid. Any guidance or suggestions on what to check next would be greatly appreciated.

Hello Apple Developer Community, I need some assistance with my account. I created a new developer account for a new project I am working on, and paid the apple developer fee. Everything was working fine for a few weeks, I was able to get my app on TestFlight and invite testers to it, as well as push updates and get feedback. The testers were family/business partners. As of a few days ago, I was locked out of my account. I first tried resetting my password, and was then met with an email claiming my account was locked with no additional information. I am trying to understand how I can either unlock my account, or transfer my existing app to a new account, so that I do not have to bother my users with downloading a new app. Additionally, I would like some help in understanding how I can safeguard myself from this issue in the future, especially given this would not be fun if my app were published. Could anyone please assist me, provide me with any advice, or point me to a place where I could get support? I spent 25 minutes on the phone with apple support, and was treated excellently as I've come to expect of Apple, but unfortunately was not given any help as the support did not have additional information. I'm hoping I'm asking in the right place, and can get some help! Thanks in advance, Fritz

I’m looking for iOS and Apple Watch users to help beta test ChoreFit, a fitness app that transforms everyday chores into measurable workouts using NEAT (Non-Exercise Activity Thermogenesis) science. What it does: • Tracks chores like vacuuming, mopping, and laundry as real workouts • Syncs with Apple Health for steps, heart rate, and calories • Lets you start or pause chores right from your Apple Watch • Adjusts effort based on body weight and optional weighted vests What I need from testers: • Install via TestFlight (link provided once approved) • Use the app during normal household tasks • Share feedback on usability, Apple Watch sync, and calorie accuracy If you’re interested in movement tracking, fitness analytics, or wearable integration, I’d love your help validating and refining this app before public release.

I am having some serious issues with all of my music apps on the latest beta of iPadOS 18.3. when I try to open them , the splash page pops open , freezes then crashes. i can open Logic Pro and it opens fine, but if I try to open a project with any of my third party music apps in that project, Logic gives me an error message stating that it can’t access coremidi. It gives me the option to continue and then proceeds to play the project without issue, with all of the third party apps functioning within Logic. If I try to open a third party program outside of Logic ( that just played in Logic) the 3rd party app crashes. Anyone else having issues with their 3rd party music apps? I have never had so many apps in a particular genre that just wouldn’t function in any of the recent betas.

Hello, is it allowed to use Foundation Model in the app? Will it work when launched on the jury's device, or will it not work because the jury will not enable Apple Intelligence?

Hello, In my App.xcdatamodeld I have an entity called File. When I am building the project with Xcode, file FileEntity+CoreDataProperties.swift is generated. After upgrading Xcode to version 26.0 (17A324), I am getting the warning: Public import of 'CoreData' was not used in public declarations or inlinable code Any idea how to get rid of this warning since it's a generated file and I can't see any option to change it?

since updating from 18.3 to 18.4, both on cellular and WiFi Networks I can’t connect to the internet. Since the phone wont connect to the internet I’m not able to turn off “find my iPhone“ to restore my iPhone to iOS 18.3 this way my iPhone is useless any ideas / thoughts about this?

So I downloaded and installed iOS26 on my iPhone 15 Pro and after that it does not want to boot anymore. It shows a battery with one red line. Which is weird because before it restarted it had 80% of the battery and I had the power cable connected at all time. Now I can't boot it up anymore. Not even with the volume button up, down, power button trick. Please help!

Hello, One of our apps has been rejected under Guideline 4.3 for spam. Our studio has been on the App Store for 10+ years and this particular app has been available for over two years without previous issue. We have submitted a couple responses to the original rejection outlining why we think our app is unique and not spam and unfortunately we have been rejected. I have also submitted an appeal and requested a phone call. This is compounded by a live issue happening in our app right now that requires a build to unblock. I added that to our review notes for submission but was rejected. We believe we have been flagged as spam in error and would like to release builds to our active players ASAP to get them unblocked and provide further value to them. Beyond submitting an appeal and requesting a call is there anything else I can do?

iPhone 15 Pro, 96% battery health. It all started last week when i was still on a 18.2 beta version. I figured updating would fix it but it s even worse now. It charges quickly and drains as quickly. Randomly shuts down at i.e. 93% battery percentage. After power off, it powers up with 10%, repeats the cycle and then it just sticks at 10%. I’ll update when I know for how long it stays like this. Meanwhile do you guys have any idea how to temporarily fix it or a workaround for the issue until further update will fix it?

Hello everyone, I’m reaching out for assistance regarding an issue with my Apple Developer Program subscription. I made the $99 USD payment for my subscription on January 10, 2025, but my account is still not active, and I am unable to publish my app. According to the process, activation should take up to 48 hours, but it has now been much longer without any updates. Additionally, when I log into the Apple Developer website, I still see the "PURCHASE" button as if the payment was not processed. Has anyone encountered a similar issue? If so, how was it resolved? Any guidance on what steps I should take next would be greatly appreciated. Thank you in advance for your help!

Hi - I've been using logic for a few years now. Three days ago I whilst opening it, a pop up said MIDICORE was not working and I haven't been able to fix it since. I read online that booting up in safe mode + opening audio MIDI set up would fix it, thing is audio MIDI set up wont load up. Anyone knows how I can fix it? I am on the verge of tears as I cannot seam to find any information online about audio MIDI set up not opening. And I cannot seam to fix the MIDI issue without it. Thanks!

Unable to search contacts , app crashes Call screen goes compl transparent

Hi everyone. Since the update to iOS 26, we are no longer able to tap the person's name and view the certificate of a signed email and choose to install the certificate or remove it. This has always worked just fine but seems to be broken on iOS 26 and I have verified that it does not work on iOS 26.1 beta as well. The part that is strange is it does work just fine on an iPad running iPad OS 26. This makes it impossible to send encrypted emails to someone via the mail app on an iPhone. I have found a temporary workaround which is to install Outlook for iOS and install the certificates through that app which then allows me to send encrypted emails via Outlook. This appears to be a bug just with the iPhone as I have also seen a few other people online talking about the same problem. Has anyone found a solution to this?