Hi, My client has already developed an ios app and they need an enterprise account to publish the app. What are the procedures to create enterprise account?

When an iOS 26.0 device is prepared in supervised mode, wifi connection screen is showing when the device is restarted. This wifi connect appears always on restart. I have tried using Apple Configurator GUI and Command line (cfgutil) command. In both cases, The behavior Wifi screen is showing up on restart for supervised mode. Cfgutil command: cfgutil -C {Certificate} -K {Key} prepare --supervised --name {NAME} --host-cert {Certificate} --skip-all Note: In non-supervised mode and other iOS, the wifi screen is not showing. Apple Configurator version: 2.18 iOS version: 26.0 Device model: iPhone 11 and above. Anyone else facing this issue? Any help is super appreciated.

I have an in house application that I develop for my company. The application requires our corporate MDM profile is installed on the phone. I recently got a new phone and our corporate IT team installed the MDM profile and the Comp Portal application for me to manage our corporate applications. I installed the application through the Comp Portal. It crashes right away when I launch the application and I see this error message in the Console when connected to the phone: "SpringBoard Snapshot generation request for bundleID: com.mycompany.mygroup.appName rejected due to the app being denylisted." I see other errors from runningboardd about failing to spawn the job and SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x510affd80; app<com.mycompany.mygroup.appName>:> with error: <NSError: 0x301e60090; domain: RBSRequestErrorDomain; code: 5; "Launch failed."> I can launch a development version of the application with no problem by connecting the USB cable from my machine to my device and running through XCode. Other people have no problems launching the application. I compared all the certificates in the management profile with another device where the application does not crash and there are identical. We checked a number of settings on the devices to see if there could be something preventing the application from running but found nothing. We reset all settings and deleted and reinstalled the application with rebooting to see if perhaps it was an incomplete installation. Our IT folks want to wipe the phone and start over but I have little confidence that will fix the issue since we don't know the root cause. I am concerned that one of my Stakeholders might have the same issue if they get a new device. This application worked fine on my old phone. Device: iPhone 16 Pro Max iOS version: 18.2.1 Any ideas on next steps to troubleshoot this issue? How can I figure out the cause of the denylisting?

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?

ABM has introduced a target date for moving a device from one MDM server to a new one. However, there's nothing in the API for setting that when you use the API to move MDM server Am I missing something or does it just not exist? Thanks Caroline

There is a longstanding restriction payload for supervised iOS devices that disables "Erase All Content and Settings." We have been experimenting with supervised watches paired with supervised phones that have that payload applied, and yet "Erase All Content and Settings" remains available on the watch. Is this: – a) An error with our payload? Should we be sending something else? – b) A bug in watchOS supervision? – c) A deliberate design choice? If so, what is the rationale for preventing organizations from maintaining this very basic level of control over devices they may be configuring and dispatching into the field?

Hello, I have implemented my virtual meeting extension and my application shows no issues in the calendar application, with a join button displayed. Everything is great!. However, with the help of EKEventEditViewController and EKEvent instances, when creating an event from the main target of the application using EventKitUI, the event will not be displayed as a virtual meeting. I have seen that other applications like Zoom have already implemented this, and I find it difficult to find relevant documentation on how to link events created by the program to virtual meetings. How do I set an event as a meeting when I want to add it to the main program? In addition, the function in the VirtualConferenceProvider.swift file of the extension program fetchVirtualConference(identifier: EKVirtualConferenceRoomTypeIdentifier, completionHandler: @escaping (EKVirtualConferenceDescriptor?, (any Error)? ）->Void) How are the parameters in this function obtained? It's impossible for every conference related link to be the same

Is there any mechanism to restrict camera usage on a user-owned device, once they have opted in, consented to the restriction, and installed a management profile? Documentation suggests it was possible with allowCamera, but has be deprecated on unsupervised devices. Am I understanding correctly that it's simply not possible anymore unless the device is supervised?

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm device management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! ! Unable to find a team with the given Team II 'L95TAW5KWP' to which you belong. Pleas Developer Program Support. https://developer.apple.com/support I contacted developer support via email and also tried calling but they don’t respond!

Hello, We are working with an iOS app that is distributed as a Public Unlisted App Store app. Our MDM allows us to import the app by URL, but when added this way, the app is marked as unmanaged in the inventory. Because of that, we cannot assign a Managed App Configuration payload to it in the normal way. What we are trying to achieve: Deliver a configuration profile to all enrolled devices before the app is installed. When the user installs the app from the MDM catalog, the app should immediately see the configuration values. Questions we’re hoping to clarify: Is it technically feasible to pre-provision a Managed App Configuration for an app in this scenario, by pushing a .mobileconfig profile to all devices? If yes, what would be the correct payload format and content of such a .mobileconfig file? We’ve tested a profile format we found here that uses com.apple.managed-app-config PayloadType and a ManagedAppConfiguration key with the bundle ID nested inside, but iOS reports this as “payload not recognized.” From what we understand, that may not be part of Apple’s schema. Any guidance from Apple or the community on whether this use case is possible (and, if so, what the valid profile format should look like) would be very helpful. Note: For a complicated company policy, at the moment we are not able to participate in ABM. Thanks in advance!

We want to set key-value pair (installation_token: xxxxx) into an app installed by MDM. Formerly we could set the key-value using Settings MDM command like this. <dict> <key>Command</key> <dict> <key>RequestType</key> <string>Settings</string> <key>Settings</key> <array> <dict> <key>Configuration</key> <dict> <key>installation_token</key> <string>xxxxxxx</string> </dict> <key>Identifier</key> <string>com.cloudflare.cloudflareoneagent</string> <key>Item</key> <string>ApplicationConfiguration</string> </dict> </array> </dict> We can still use this for the apps installed withInstallApplication MDM command, however we cannot apply this configuration into the app using Declarative Device Management. When we try it, we got an error like this. <dict> <key>CommandUUID</key> <string>.............</string> <key>Settings</key> <array> <dict> <key>ErrorChain</key> <array> <dict> <key>ErrorCode</key> <integer>12008</integer> <key>ErrorDomain</key> <string>MDMErrorDomain</string> <key>LocalizedDescription</key> <string>Could not modify apps managed by Declarative Device Management.</string> <key>USEnglishDescription</key> <string>Could not modify apps managed by Declarative Device Management.</string> </dict> </array> <key>Identifier</key> <string>com.cloudflare.cloudflareoneagent</string> <key>Item</key> <string>ApplicationConfiguration</string> <key>Status</key> <string>Error</string> </dict> </array> How can we work with managed application configuration with DDM?

Main Issue We are experiencing an issue where iOS devices become unresponsive when attempting to shutdown or reboot from the lock screen while locked into Single App Mode via MDM or Apple Configurator. Steps to Reproduce: Start any iOS device. Use Apple Configurator or an MDM solution to enable Single App Mode. Wait for the device to lock into the specified app. Lock the device so that it goes to the lock screen. Hold the Power button and Volume Up button until the shutdown/emergency screen appears. At this point, the device becomes unresponsive. After approximately 30 seconds, the message "Guided Access app unavailable. Please contact your administrator" appears. The device is now frozen, and the only way to recover is to force restart it using Apple's forced restart method (Apple Support Link). Additional Issue: Additionally, we observe that when using an app in Single App Mode, attempting to reboot the device and canceling the reboot prevents any subsequent reboot attempts until a force restart is performed. Steps to Reproduce This Behavior: Lock the iOS device into Single App Mode. Use the app normally. Attempt to shut down the device by holding the Power and Volume Up buttons. The shutdown/emergency screen appears as expected. Cancel the shutdown by tapping "Cancel." The device returns to the lock screen. Swipe up to return to the app. Attempt to shut down the device again using the same method. Nothing happens—the shutdown screen no longer appears. The only way to reboot the device now is through a forced restart. This appears to be a bug in Single App Mode behavior, potentially related to Guided Access restrictions. Has anyone else encountered this issue? Is this the right place to report this issue? or should I report it elsewhere? I have more videos and material showing how to reproduce this issue if needed.

I am needing to access the ABM API via C#. Searching has directed me to use BouncyCastle. I have downloaded the PEM file. However, using the following: using (var reader = File.OpenText(pemFilePath)) { var pemReader = new PemReader(reader); var keyObject = pemReader.ReadObject(); I get the error "problem creating EC private key: System.NullReferenceException: Object reference not set to an instance of an object."

We are using management properties in DDM to assign configurations and assets to a particular device, and one of those properties should be updated by a business app on the device. For example, if the business application is not launched every 30 days, then a predicate should evaluate to false and the device put into single app mode to force the application to run. If, however, the app is launched any time in the 30 days, then the counter should be reset. Essentially trying to enforce that users in the field cannot work offline for extended periods of time without getting the latest dataset from the company. The single app mode part is very clear and the predicate to assign the configuration based on the date in the management property seems logical. However, the question is: Can a predicate be built upon data that is updated by the custom MDM app? ie: If the app is launched on the device without connectivity, can a property be updated that the DDM predicate system can access that can be used as an input property? such as "last launch time" or "last check-in" of the custom app? Alternately, could the custom MDM app read any of the management properties set via DDM? That way the user would know the value that the DDM configuration for restricting the device.

I found that "search" endpoint is recently added to api.ent.apple.com : https://developer.apple.com/documentation/devicemanagement/get-catalog-search-results However it seems we cannot find custom apps using this API even with sToken. Is it not suppoted yet? Thank you

Recently, we have encountered some users who have been unable to open the enterprise signature application after upgrading to version 18.3.2, without an IPS file. Through system logs, we found that signature verification has occurred SecKeyVerifySignature failed: Error Domain=NSOSStatusErrorDomain Code=-50 "rsa_pub_crypt failed, ccerr=-7" UserInfo={numberOfErrorsDeep=0, NSDescription=rsa_pub_crypt failed, ccerr=-7} Waiting for the information, I will provide the obtained system logs below. The application package name that crashed is com. mobile. moa aa.txt new

Hello, I am currently attempting to use declarative management to install enterprise application, however I am running into errors. Initially the device was failing to unpac the initial manifest it downloaded. After pulling logs from the device it was revealed that the manifest must include the bundle-version for it to parse as valid. Adding this has allowed for the ipa to be fetched from the server however there is a secondary issue. The application is on the device but is unable to be opened due to the device being unable to validate its integreti. Any additional information would be useful. For completion the working manifest will be pasted below. It should be noted that the manifest below does work when requesting application installs through MDM commands. <***> <items type="array"> <dict> <assets type="array"> <dict> <kind type="string">software-package</kind> <url type="string">https://domain/web/mdm/ios/enterpriseipa/bundle.id</url> </dict> </assets> <key type="dict" name="metadata"> <bundle-identifier type="string">bundle.id</bundle-identifier> <kind type="string">software</kind> <subtitle type="string">app</subtitle> <title type="string">app</title> <bundle-version type="string">x.x.x</bundle-version> </key> </dict> </items> </***> </plist>

I'm trying to use DDM manager Safari Extensins in macOS Sequoia. I generate json and load it by mdm and ddm , but it doesn't seems to work. The json I loading is the following: { "Type": "com.apple.configuration.safari.extensions.settings", "Payload": { "ManagedExtensions": { "*": { "State": "AlwaysOn", "PrivateBrowsing": "AlwaysOn", "AllowedDomains": [], "DeniedDomains": [] } } }, "Identifier": "com.test.safari" } This following image is macOS Sequoia Console log. It show the "com.apple.configuration.safari.extensions.settings" had been run successfully, and no errors. macOS Sequoia response is the following: { "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "com.example.act", "valid" : "valid", "server-token" : "5cc191206d1b1933" } ], "configurations" : [ { "active" : true, "identifier" : "com.test.safari", "valid" : "unknown", "server-token" : "29d3ec5ab48e6367" } ], "assets" : [ ], "management" : [ ] } } }, "Errors" : [ ] } you can see macOS Sequoia response , The "valid" value is always "unknown" at ""identifier" : "com.test.safari", but "Errors" is empty, Safari app don't load extensions , the SafariExtensionSettings" ddm don't work, Is there anything wrong with "SafariExtensionSettings" json? or how can I debug it

Hi,team: I need to distribute an mdm configuration file containing the "ServiceManagementManagedLoginItems" service to a large number of company-supervised computers, where com.apple.servicemanagement only supports macOS 13.0+. However, I cannot effectively distinguish whether the device system where the mdm configuration file needs to be installed is greater than 13. Can I directly install the mdm configuration file on all devices? Will installing the mdm configuration file on devices less than 13 have any impact on the system or other configuration items in mdm? The description link of ServiceManagementManagedLoginItems is: https://developer.apple.com/documentation/devicemanagement/servicemanagementmanagedloginitems

Hello folks, I stumbled upon a weird CNContact serialization problem. I use the Contacts framework to update the AIM field, which is one of the instantMessageAddresses within a single Contact. Here is the simplified code I used: func updateAIMFieldOn(contact: CNContact, aimValue: String) { do { guard let mutableContact = contact.mutableCopy() as? CNMutableContact else { logger.error("[CM] Couldn't update contact with aim \(aimValue)") return } var updatedAddresses = mutableContact.instantMessageAddresses updatedAddresses.append(CNLabeledValue(label: "", value: CNInstantMessageAddress(username: aimValue, service: CNInstantMessageServiceAIM))) mutableContact.instantMessageAddresses = updatedAddresses let saveRequest = CNSaveRequest() saveRequest.update(mutableContact) try CNContactStore().execute(saveRequest) logger.verbose("Contact's AIM updated successfully!") } catch { logger.error("Couldn't update contact") } } And after serializing the contact to data, and then deserializing, the contact got two AIM fields with the same value: X-AIM;type=pref:some:part:of_my_aim_value IMPP;X-SERVICE-TYPE=AIM;type=pref:some:part:of_my_aim_value Why does it work in this manner? Is it possible that ":" char causes that? Format of my aim username is {some:part:of_my_aim_value}. I didn't find any information in the docs. Thanks!