We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

I desperately need help with this issue. Are there any known issues regarding MDM profiles not installing on iPhone 17? Too many cases are being reported.

Details: Device: iPhone 12 Pro Max System: iOS 26.1 beta 2 Issue Description: When testing MDM device restriction capabilities on iOS 26.1 beta 2, I found that the allowCamera restriction does not work as expected. Observed Behavior: • On a BYOD device: When allowCamera is set to false, the Camera and FaceTime apps disappear from the Home Screen, as expected. However, third-party apps (such as WeChat) can still access the camera and take photos. • On earlier versions (e.g. iOS 26.0.1): Setting allowCamera to false correctly blocks all apps, including third-party apps, from accessing the camera. Initially, I assumed Apple might have changed this restriction behavior so that allowCamera only applies to supervised devices. However, after testing on supervised devices, I found that even there, when allowCamera is set to false, the Camera and FaceTime apps are hidden, but third-party apps can still use the camera. This indicates that the restriction is not functioning correctly in iOS 26.1 beta 2. Expectation: When allowCamera is set to false, all camera access — including third-party apps — should be blocked. Request: Could someone from Apple’s development or MDM team confirm whether this is an expected behavior change or a potential bug in iOS 26.1 beta 2?

Details: Device: iPhone 12 Pro Max System: iOS 26.1 beta 2 Issue Description: When testing MDM device restriction capabilities on iOS 26.1 beta 2, I found that the allowCamera restriction does not work as expected. Observed Behavior: • On a BYOD device: When allowCamera is set to false, the Camera and FaceTime apps disappear from the Home Screen, as expected. However, third-party apps (such as WeChat) can still access the camera and take photos. • On earlier versions (e.g. iOS 26.0.1): Setting allowCamera to false correctly blocks all apps, including third-party apps, from accessing the camera. Initially, I assumed Apple might have changed this restriction behavior so that allowCamera only applies to supervised devices. However, after testing on supervised devices, I found that even there, when allowCamera is set to false, the Camera and FaceTime apps are hidden, but third-party apps can still use the camera. This indicates that the restriction is not functioning correctly in iOS 26.1 beta 2. Expectation: When allowCamera is set to false, all camera access — including third-party apps — should be blocked. Request: Could someone from Apple’s development or MDM team confirm whether this is an expected behavior change or a potential bug in iOS 26.1 beta 2?

Before iOS26.1, allowCamera set false, all app can't use camera. On iOS26.1, allowCamera set false, removes camera icon from the Home Screen, but third app can still use camera, such as Safari and other apps that can call camera. Is it a bug or a new features？

After applying the MDM camera restriction on iOS 26.1 beta 2, the camera availability status is reported incorrectly. After applying the MDM camera restriction [UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera] return YES

Hi there, We’re testing Declarative Device Management (DDM) for VPP app management and followed the latest declaration template here: https://github.com/apple/device-management/blob/release/declarative/declarations/configurations/app.managed.yaml Our goal is to enable VPP auto-updates via the declaration. The payload we’re using looks like this: "AppStoreID": "1231325957", "InstallBehavior": "{\"Install\": \"Required\", \"License\": {\"Assignment\": \"Device\"}}", "UpdateBehavior": "{\"AutomaticAppUpdates\": \"AlwaysOn\"}" } What we’re seeing Device A (no Apple ID signed into App Store): User can manually update the VPP app with the above declaration in place. ( The same user cannot update the app if UpdateBehavior is not in the declaration payload. Device B (Apple ID signed into App Store, and the same Apple ID doesn't have the above app purchased): User cannot manually update the same VPP app. The App Store shows the error seen when UpdateBehavior is absent: “ cannot be updated because it was refunded or purchased with a different Apple Account.” Also, in this case, the user has no way to purchase the (free) app by their own as the app shows as owned/managed by MDM server. We have to remove the declaration, let the user purchase the same app, then re-deploy the declaration to allow the user to click that "Update" button when a new version for that app is available. Additionally, we’re unsure about the criteria/timing for automatic VPP app updates under DDM. After a new version became available, we waited several hours but the app did not auto-update. Repro summary App: VPP, device-assigned license Declaration: AutomaticAppUpdates = AlwaysOn, install required Device A: not signed into App Store → manual update allowed Device B: signed into App Store → manual update blocked with “refunded/different account” error Auto-update did not occur after waiting several hours post-release Any guidance, confirmation of expected behavior, or tips on additional logging we should collect (e.g., specific App Store / MDM / DDM logs and subsystems) would be greatly appreciated. If this is a known issue or requires a Feedback Assistant report, we’re happy to file one. Thanks,

I need to verify my domain for Apple Pay but I'm on Shopify. Domain: blissta.co File IS accessible: https://blissta.co/.well-known/apple-developer-merchantid-domain-association But verification fails because it's a redirect, not direct hosting. Shopify doesn't allow .well-known folder creation. Has anyone solved this? Need either: Way to make Apple accept redirects Shopify workaround for direct file hosting Manual verification from Apple Using Authorize.net gateway. Case #102711828925

On iOS 26, if in "Single App Mode", the device gets stuck on the lock screen. Devices are configured in SAM (kiosk mode), without a PIN requirement. Since updating to iPadOS 26, every single device that locks (goes to sleep) becomes completely unresponsive at the lock screen. Touch input does not work. The only way to regain access is to reboot the device, which will boot to the SAM app, but then lock again if it goes to sleep. Related discussion in the public forums.

Hello, I am Sergio Sánchez, administrator of NumbuX. We are developing our own MDM. We are already granted as a MDM Vendor. We need to issue the APNs certificate for our MDM for the first time in the Push Certificate portal (identity.apple.com). We are having the error: “invalid signing request” when we upload the signed CSR to identity.apple.com. That is because we do not have the External UUID. Could you please let us know what is our External UUID? Without that, we cannot upload it successfully. We have already compared different signed CSR from other MDM Vendors and all have included the External UUID in the CSR. Please, do not send links, there is not way for us to know our External UUID because it is the first time that we try to issue this APNs. After the first time, we do not need your assitance. Please, let us know our External UUID. Thank you. Kind regards.

Issue Description: We are experiencing MDM profile installation failures specifically on iPhone 17 devices. After extensive testing and comparison between affected and working devices, we suspect this appears to be a parameter transmission error rather than device settings. Technical Analysis: Device Settings Comparison: No differences found between problematic and working devices in system settings, indicating this is not a configuration issue. Suspected Parameter Transmission Error: • Device model information appears to be restricted or blocked during profile download • User ID and phone number parameters are not being transmitted to the server • Installation logs show missing login ID and phone number entries Symptoms: • During MDM profile installation, the "Apps & Restrictions" section that should appear is missing • Profile download parameters are suspected to not be properly transmitted to the server • Installation process fails at the profile configuration stage Critical Finding: When we cloned a previously working device to create a problematic device configuration, the cloned device also began experiencing the same installation failures. This strongly suggests the issue is related to device-specific parameters or identifiers. Additional Information: We continue to receive reports of this issue from our iPhone 17 users, and these reports are occurring across various iOS versions. Request for Assistance: Has anyone encountered similar MDM profile installation issues on iPhone 17? Are there known limitations or changes in how device parameters are transmitted during MDM enrollment on this model? Any guidance on debugging parameter transmission or known workarounds would be greatly appreciated.

Hi, I was looking for advice on the suitable mac to get for a web app development project for university . Would an Apple MacBook Air 2020 M1 8GB RAM 256GB SSD 13.3" macOS Big Sur, be sufficient ?? Or would I need a newer version !

Hello ! Currently, we have customers who use about 5,000 devices. In the case of ios26, the phone number is not acquired overall, and 18.x, 17.x, and 16.x are all acquired in half and not acquired in half. https://developer.apple.com/documentation/devicemanagement/deviceinformationcommand/command-data.dictionary/queries-data.dictionary It seems that it is the right behavior not to acquire it on the specification sheet. However, I wonder when it became impossible to acquire. (There are devices that can be acquired and devices that can't be acquired in the same os version.) Will the devices that are being acquired be blocked someday? When it was developed in 2019, it was in a state that could be acquired in full. I would also like to ask if there is an alternative way to get your phone number. Thank you.

Hello, I’m facing an issue while trying to add iOS devices to Apple Business Manager (ABM) using Apple Configurator during enrollment. When going through the setup process, the device fails to complete enrollment and times out. I’ve tried it multiple times. The device does appear in ABM during the process and I am able to assign it to different MDM servers but since the setup times out and fails, the device is automatically released. I have tried this with multiple iOS devices and it times out on every single one of them. Steps attempted: Factory reset and re-enrollment of the device Ensured network connectivity is stable and tested on multiple Wi-Fi networks Tried the following process using Apple Configurator on Mac (wired): Created a Wi-Fi profile in Configurator Connected the iPhone via cable and used Prepare (manual configuration) Used the “MDM server” placeholder and trusted anchors (as recommended) Linked the device to the ABM organization Skipped Setup Assistant steps Attached the Wi-Fi profile, then prepared and wiped the device Verified that the device should appear in ABM Attempted to assign the device to my MDM in ABM Despite these checks, the enrollment process times out. I’m attaching a screenshot of the error for reference. Could someone advise what might be causing this timeout or how I can further troubleshoot this? Any guidance would be greatly appreciated. Thanks in advance.

Hi guys, I need to configure a VPN to work only for specific apps. I already have a supervised iPhone, and I’ve successfully configured the VPN, but right now it applies to the whole phone. I need it to work just for some apps. I tried using both Apple Configurator and iMazing, but I can’t find this option there.

We are experiencing an issue with Apple Business Manager (ABM) synchronization that is blocking our device management workflow. Issue Description: During the ABM sync process in our MDM, we receive the error: "ABM Terms and Conditions not signed." What We’ve Checked: Logged into the ABM portal as the Administrator and confirmed that the latest Terms and Conditions. Attempted to renew the ABM token on our existing server, but the same error message continues to appear in MDM. Tried creating a brand new ABM server integration, which also fails with the same error. We checked with our MDM provider and they shared the logs, response received from ABM. It says T_C_NOT_SIGNED. But we have already accepted all the new Terms in ABM. We would appreciate any help in resolving this issue or guidance on what steps to take next.

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. I am currently running into two specifc issues while continuing to implement the app.managed configuration which are quite frustrating and I will detail them below Unlike MDM where an application could be "reinstalled", by sending an install application command down for the same app DM does not have a similar mechanism which causes some issues as (while inconsistent) devices do not always respect the configuration sent down, and will not begin downloading VPP applications. They can be seen in the configuration when checking under VPN & Device Management but they do not return on a status report, alternatively and app will "install" but will have a cloud symbol next to it requiring a download (which I believe would be impossible on supervised devices without apple accounts/have restricted apple accounts associated to them). These apps are also reported incorrectly, as they return a managed response while being inaccessible. Both of these issues are solved by removing and reinstall applications (occasionally). Is there any easier way to trigger a re-install or is this the only way to trigger this? The Version element that can be optionally sent down does not seem to work (or if it does, does so inconsistently). A device will very happily download the application initially with the version element present, though when we detect an updated external ID from the VPP program and send down an updated configuration devices behave unexpectedly. Some have ignored it, some have responded back that a download has begun (with no download taking place and the application clearly still being the initial installed version as can be see in the apps page) or it just works, but there is not consistency. I realize a new UpdateBehavior object has been added to possibly handle this, but it is only supported in iOS 26 and above and there are plenty of people who do not have phones that can upgrade that far. Are there alternative ways to enforce an application update other than uninstalling and reinstalling the application without the version (or will sending down a config without a version after one was originally pinned force it to update to latest?) Kind Regards

Hello all, My question is, how to get APP (specialized in make SOPs for industrial users) that has already been listed outside of mainland China to be listed on apple store of mainland China? Can I simply refile it to cover China mainland with existing apple developer account or do I have to create a new local apple developer account to start the listing process? Your advise and help will be highly appreciated. Thank you, Link

We've disabled FUS through a config profile, but users can still access FUS by enabling the MenuBar/Control Center icons. My org would like to prevent access to FUS so I've created a config profile. But the profile doesn't seem to work. Anyone have any ideas what I'm missing, or is this an OS bug? <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadDisplayName</key> <string>macOS - Tahoe - Disable Fast User Switching Control Center</string> <key>PayloadIdentifier</key> <string>com.myorg.fast-user-switching</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadScope</key> <string>System</string> <key>PayloadUUID</key> <string>f1a2b3c4-d5e6-7890-abcd-ef1234567890</string> <key>PayloadVersion</key> <integer>1</integer> <key>TargetDevmyorgType</key> <integer>5</integer> <key>PayloadContent</key> <array> <dict> <key>PayloadType</key> <string>com.apple.controlcenter</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>com.apple.controlcenter.57EBEF9E-E568-411E-AE27-500AD98C94F4</string> <key>PayloadUUID</key> <string>f1a2b3c4-d5e6-7890-abcd-ef1234567890</string> <key>UserSwitcher</key> <integer>8</integer> </dict> <dict> <key>PayloadType</key> <string>.GlobalPreferences</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>.GlobalPreferences.71DE1486-60BC-4CB9-890D-AD50A772890D</string> <key>PayloadUUID</key> <string>c5234012-e0sw-2066-6fl8-3bd5p8125op7</string> <key>MultipleSessionEnabled</key> false/> </dict> </array> </dict> </plist>

Nuestra cuenta está aprobada como MDM Vendor y necesitamos emitir por primera vez el certificado APNs para MDM en el portal de Push Certificates. Procedimiento seguido Primero hemos descargado desde nuestra cuenta de Apple Developer el certificado de MDM Vendor y lo hemos instalado en el ordenador. Esto lo hemos hecho para que, al lanzar la instrucción de OpenSSL, se pueda utilizar el UUID gestionado por Apple y así generar el CSR de forma correcta. La instrucción que estamos ejecutando es la siguiente: openssl req -new -newkey rsa:2048 -nodes -keyout mdm_private.key -out mdm.csr -subj "/O=Numbux/OU=MDM/CN=com.apple.mgmt.External." El CSR resultante es puro (no está firmado ni empaquetado) y está generado con RSA 2048 y SHA256. Sin embargo, al subirlo al portal de Push Certificates, seguimos recibiendo el error “invalid signing request”. Solicitud Dado que es nuestra primera emisión, entendemos que necesitamos el External UUID asignado por Apple a nuestra organización, porque veo que el problema se deriva de una incorrecto UUID que se está generando en el comando OpenSSL. ¿Podríais confirmarnos cuál es ese valor para poder completar el CSR y así emitir correctamente el certificado APNs MDM? He llamado a los números 900 812 703 y al 900 812 468 y he escrito al soporte de developer. NADIE ES CAPAZ DE DARMELO. Sin el external UUID no puedo crear el APN para mi MDM. Alguien me puede ayudar? No me mandeis links ni posibles números que llamar porque ya lo he hecho.