When performing the P12 certificate sending test, there was an error stating that authentication failed due to the remote party closing the transport stream. May I ask how to solve this?

I am developing a CarPlay driving tasks app and is able to display push notifications on CarPlay. I am looking at a way to get a tap action handler for push notifications on CarPlay such that when a user taps the notification and by default the app opens, but I want to present a CPInformationTemplate with data corresponding to the tapped notification.

token:009739d008a19dbe7e2273a1e4e8b5f73c4e2d7e220e7308f41e316f4c2fcf56 最近app无法收到服务端通过apns推送的通知，提交是成功的，但是app的所有用户都无法收到通知

I’m getting calls from Pakistan every hour. I cant block them because it’s a different number every time. I have downloaded the new beta version of the upcoming software update and it allows you to set to ask a question before unknown callers ring through. It’s not working and my phone is constantly ringing. I can’t block unknown callers as I use my phone for work. How can I silence ringing from calls specifically from Pakistan Using the country code?

I am using push notification in my app. User token gets properly registered and is sent to server. Notification are also sent by server and recieved on device as expected. The problem occurs when user uninstalls the app. iOS does not provide any option to handle uninstall event. On top of that when server send notification to such device token APNS feedback service sends success message. Meaning APNS sends push notifications to uninstalled app.I have an API to unregister the device on server since no event is triggered I am unable to call it.Please suggest a way out.

Hi, we've observed a weird behavior for a small amount of our user that we keep receiving the same token from APNs despite it's shown as Unregistered. When we try to send push to the token, we got an Unregistered error so we remove that token from our server. However, later we would receive an add token request from the client with the same token we just removed, and when we try to send to the token it returns Unregistered again so we remove the token again. This happened 3 times for a user in an hour. The identifierForVendor remains the same for all the requests. We also owns the client and I've checked client code that it's sending the token it received from didRegisterForRemoteNotificationsWithDeviceToken to the server.

Hello, previously i have tested the purchase via test flight and the server notification was sent to my sandbox url. Now when I made the purchase from live app, my server did not receive any notification even though the production url was the same as the sandbox url. The purchase was for a consumable product. Please help, thanks.

I have a “1” above the setting app on my iPhone. However when I open settings there is no notification that shows up. I have tried force restarting and done the beta updates as they release however nothing works to got rid of it. What can I do?

requestUrl:https://api.storekit-sandbox.itunes.apple.com/inApps/v1/notifications/test method:Post responseCode:200 testNotificationToken:06beba6c-7587-44f6-a4b8-f12b11db6061_1745832671126 Request environment: ①APP from: TestFlight ②Apple acount : Sandbox account ③Apple originalTransactionId: 2000000907966801 App Store sandbox server notification configuration is fine(https://*.com/v2/apple_refund_notify), I have tried many times, but have not received any notification from Apple. Is this API not working?

My push notifications on Ios devices come through but only silently while all settings are on order. On Android sounds are on. Anyway knows how to fix this on Apple's side?

We are trying to figure out a strange issue. Our app has not changed for at least 10 months but my devices and the QA tester device have all stopped receiving push/call notifications for twilio voip The twilio credential and apple voip services certificate are in date and valid It is pointing to the correct bundle id and topic (not changed configuration for years) token passed in to TwilioVoiceSDK.register() is retrieved from PKPushRegistry as per guide Running locally the Twilio Voice SDK successfully registers and retrieves APNs token What is interesting is if I log in with exactly the same client account on an iOS 18.5 device (and an older iPad) call notifications work perfectly (I have made sure all focus modes/dnd are off and notification settings are identical) The only changes myself and QA have made recently is minor iOS 18 version updates - 18.6.2 and 18.7.1 These now receive Invalid device token from APNs when Twilio attempts to create a call/voip notification for the user identity Our devices sometimes switch environments test/prod so I installed the app cleanly on a borrowed 18.6.2 device and got the exact same issue We have tested on these devices most of the year with no issues. I have been in touch with twilio support and added code to explicitly unregister and re register on an affected device to clear any bindings but it didn't help. Have apple made any changes in PushKit or token behaviour for later versions of iOS 18? Thanks

I a using the current RC version of iOS on both my iPhone and iPad. I and developing an iCloud based app and it works correctly on iOS 18. When I upgraded to iOS 26 the iCloud functions work correctly but the push notifications do not work. The issue appears to be creating subscriptions. The following code should create a subscription and does not get an error, but it did to create a subscription under iOS 26. func subscribeToNotifications(recordType: String, subscriptionID: String, notification: CKSubscription.NotificationInfo) { let subscriptionIDForType = "\(subscriptionID)-\(recordType)" let predicate = NSPredicate(value: true) let subscription = CKQuerySubscription(recordType: recordType, predicate: predicate, subscriptionID: subscriptionIDForType, options: [.firesOnRecordCreation, .firesOnRecordUpdate, .firesOnRecordDeletion]) let notification = CKSubscription.NotificationInfo() subscription.notificationInfo = notification CKContainer.default().publicCloudDatabase.save(subscription) { (returnedSubscription, error) in if let error = error { print("Error saving subscription: \(error)") } else { print("Successfully saved subscription: recordType: " + recordType + " subscriptionID: " + subscriptionIDForType) } } } Print results: Successfully saved subscription: recordType: folder subscriptionID: folderName-folder

I'm observing that when a silent push notification is sent to our app, is is started up in the background for 30 seconds before being suspended until the app is launched by the user. This causes data to persist from the silent push notification to the user app launch. I couldn't find documentation on this behavior for silent push notifications, and was wondering if it's possible to have the app terminate after handling the silent push notification. Is there documentation on the general flow of silent push notifications as well? I'm able to handle the edge cases if the app has to be suspended until user launch, but just want to confirm that this is the expected behavior before I go about handling it this way.

Push-notification token is properly requested and displayed from the iOS simulator / xcode, but not from the release in the AppStore... Both popups for permission (push-notifications and critical alert) appear and can be confirmed, but no callback takes place...

My iPhone VoIP app, which I'm developing, uses Apple Push Notification service (APNs). I have a question regarding the following statement found in "[Overview of app transfer > Apps using push notifications]" Overview of app transfer You must manually reestablish push notification services if transferring an app that uses the Apple Push Notifications service (APNs). The recipient must create a new client SSL certificate using their developer account, as associated client SSL certificates, TLS certificates, and authentication tokens aren’t transferred. Question Let's say the recipient of the app transfer creates a "new SSL certificates, TLS certificates, and authentication tokens." Afterward, we need to verify that the Apple Push Notification service (APNs) works correctly when combining the transferred app with this "new SSL certificates, TLS certificates, and authentication tokens." However, until the recipient finishes verifying that it works correctly, the transferor want to keep the app available for download as before and be able to use the Apple Push Notification service. Is this possible? More specifically, can the recipient test the app to be transferred on TestFlight "before the transfer is completed"? I want to combine it with the "new SSL certificates, TLS certificates, and authentication tokens." and test it on TestFlight. Reading "[Initiate an app transfer]," it mentions the existence of a "Pending App Transfer" status. During this "Pending App Transfer" status, can the recipient test the app on TestFlight? Initiate an app transfer After you initiate the transfer, the app stays in its previous status, with the Pending App Transfer status added, until the recipient accepts it or the transfer expires after 60 days. Also, if there are any documents describing these procedures, I would appreciate it if you could share them. Thank you very much.

Hi Team, We’re following up on our request for the Critical Alert entitlement for our app, which we plan to use to notify users about critical states of their devices. It’s been almost 4 weeks since we submitted the request, and we wanted to check on the typical review timeline so we can plan our upcoming work accordingly. If there’s anything we can provide or clarify to help complete the review or make the process easier, we’d be happy to assist. or the right forum to reach out to.

Hello, We are facing issue that sometimes a voip notification gets delivered after it is expired. The issue can be simply demonstrated we set the device to flight mode, and after 20s we disable flight mode. We still receive the voip notification. We are setting the expiration header as following apns-expiry=0, so from my understanding it should not be delivered if the device was not able to receive the notification in the fist attempt. I have read following thread https://developer.apple.com/forums/thread/778512, from which I understand this is a long standing issue. Hence my question is, is there any way how we can notify the call kit that the call is actually no longer valid, and do not display the call to the user at all? Currently we are forced to always display CallKit call when the notification comes, and some of our users are confused that they see a missed call which they did not have any chance to pick up. Please let me know if you need any more information. Best Regards, Adam Chlupacek

We are developing a messaging app which sends End-to-End encrypted data. The application supports multiple types of E2EE data, including text messages and voice over IP calls. Apple's article titled “Sending End-to-End Encrypted VoIP calls” (https://developer.apple.com/documentation/callkit/sending-end-to-end-encrypted-voip-calls) states that the following steps are required to support E2EE VoIP calls: Request permission to receive remote notifications through the User Notifications framework Register for VoIP calls using PuskKit Add a Notification Service Extension target to your app. Add the com.apple.developer.usernotifications.filtering entitlement to the NSE target’s entitlements file. We have completed steps one through three. We are still missing the filtering entitlement. As of right now the system does not allow us to use reportNewIncomingVoIPPushPayload(_:completion:) method because of the missing entitlement.
 Below is a short description of how our messaging app works: User sends a message to another user. The message is encrypted on device and sent to our server. The server receives the message and sends a notification request to APNs if needed. The server cannot decrypt the message. As an additional security feature we do not pass the encrypted message in the notification payload. The notification payload only contains a localizable generic placeholder message string and default sound in the ‘aps’ dictionary part. Upon receiving a notification from our server, the NSE makes a request to our server and fetches the latest messages (encryption keys have already been exchanged between the participants of the conversation) and determines what to do next (display a banner, or pass a call to CallKit). E2EE VoIP calls are a core feature of our app, so it is imperative that we receive the filtering entitlement. Our capability request has been rejected twice now. The latest request was rejected because: Support for VoIP calls should be provided by PushKit. For more information, please consult the documentation page "Responding to Notifications from PushKit". We cannot support VoIP calls by solely relying on PushKit. Our server cannot make a distinction when to use ‘voip’ (call) and ‘alert’ (text message) apns-push-types. Therefore, the application must be able to use reportNewIncomingVoIPPushPayload(_:completion:) function, where com.apple.developer.usernotifications.filtering entitlement is needed. We have sent the above text to support two weeks ago and made yet another request. Has anyone been able to get the capability as of late? What are the magic words that need to be included in the capability request? Can someone here help us? We made the first request on 3rd of September so this process has taken two months. Our planned release date is coming up and the absence of the capability is holding us back. We already have a released desktop and Android versions so changing the server implementation is really not an option.

Hello! When setting an alarm in an AlarmKit app, the alarm will not fire properly/reliably (the alert presentation is not shown) while the device has an app foregrounded in the landscape orientation. This behaviour has been present since the betas, however until the first party Reminders app showed the behaviour in the iOS 26.2 beta I suspected the issue was in my own code. The behaviour is exhibited when scheduling alarms in several AlarmKit apps: The Reminders app The AlarmKit WWDC Demo Project My own AlarmKit app However alarms scheduled by the stock Clock app do not seem to exhibit the behaviour. Minimal repro with first party app: Be using iOS 26.2 beta Open Reminders app Create an urgent reminder for a time in the not too distant future Open Mail.app Change to landscape orientation Wait for the fire time Observe the phone vibrates at the correct time but no alarm is fired Drag the notifications pane down, observe the LiveActivity has been started Change to portrait orientation Observe alarm fires I have noticed this behaviour from the AlarmKit apps mentioned while foregrounding other apps besides Mail, both first and third party: Photos YouTube Netflix The behaviour does not seem to occur when the foregrounded app is restricted to portrait mode, no matter the actual orientation of the device. In the case of my own app I have tried a multitude of ideas to get it to work reliably, getting alarms to fire in landscape is very intermittent at best and most often works after a fresh reboot. I've submitted a Feedback for the Reminders app: FB20956492. Any advice or suggestions would be appreciated!

Hello. I'm currently implementing Apple Notification v2 to prepare for refunds for in-app purchases, but I'm not receiving requests from Apple servers to my backend server. I've applied HTTPS (TLS 1.2) and correctly registered production/sandbox notification URLs on App Store Connect. After requesting a test notification, when I check the status of testNotificationToken, I receive an UNSUCCESSFUL_HTTP_RESPONSE_CODE as follows: {"signedPayload":"......":[{"atteptDate":1752128001970,"sendAttemptResult":"UNSUCCESSFUL_HTTP_RESPONSE_CODE"}]} The endpoint for receiving notifications is set to accept POST requests with application/json format, and it responds with 200 (OK) without any content. However, Apple notifications are not coming through. Could anyone help me with this issue?