Hello, Recently we got a question about the keyboard sensor data collection in our research project: "For the typing statistics, was any typing included or only messaging and notes? E.g., typing in the browser, phone search, calendar, etc?" While I believe it should be any typing included, I was not able to find a document explicitly stating that. Could you help to confirm it or guide me to any documentation explaining it? Thanks!

Hi Apple Developer Community, I'm implementing MetricKit launch performance tracking in our iOS app and need clarification on two properties: histogrammedTimeToFirstDraw histogrammedOptimizedTimeToFirstDraw The Documentation Problem: The official MetricKit documentation provides minimal explanation of these properties beyond their names. Based on naming conventions, I initially assumed: histogrammedTimeToFirstDraw = cold launches histogrammedOptimizedTimeToFirstDraw = warm/optimized launches Based on our measurements: The “optimized” metric appears only in a small fraction of launches The "optimized" metric is actually slower The naming suggests the opposite behavior Questions: What specific launch conditions does each metric measure? Why would "optimized" launches be slower and less frequent? Is histogrammedOptimizedTimeToFirstDraw related to iOS app pre-warming or prediction features? If these metrics don’t correspond to cold vs. warm launch times, is there an alternative way to measure them accurately? Any clarification from Apple or insights from developers who've tracked these metrics would be greatly appreciated.

Is there any resource which describes this type of errors? I was integrating SKADNetwork view through Ad attribution and everything from the source app side is done and this error appears after the target app is installed and opened. Here is the full error Error setting install attribution pingback registered for app: <APP ID>, error: Error Domain=ASDErrorDomain Code=1209 "SKAdNetwork: Could not set registered for pingback that does not exist." UserInfo={NSLocalizedDescription=SKAdNetwork: Could not set registered for pingback that does not exist.}, result: 0 I cannot find any resource on the internet which gives any info about this ASDErrors. If anyone can help, you would be doing me a solid, Thanks in advance.

I created a new project, packaged it with my own enterprise certificate, installed and used it. There were no problems on most devices. However, on some devices with system versions of 18.3 and 18.4, the app crashes when opened after trusting the certificate. It seems that there is something wrong with the certificate, but I have confirmed that the certificate is fine. May I ask what the cause of this issue is?

I'm building a voice-to-text keyboard extension that needs to open the main app briefly for audio recording (since keyboard extensions can't record audio), then return the user to their original app. The flow I'm trying to achieve: User is in WhatsApp (or Messages, Slack, etc.) User taps "Voice" button in my keyboard My main app opens via deep link (myapp://keyboard/dictation) App starts recording App automatically returns user to WhatsApp I cannot find a way to detect which app the keyboard is running inside, or which app opened my main app via the deep link. UIInputViewController.textDocumentProxy - No host app information available UIApplication.OpenURLOptionsKey.sourceApplication in application(_:open:options:) - When opened from a keyboard extension, does this return the host app bundle ID or the keyboard extension bundle ID? Private APIs (for research only, not production): _hostBundleID on UIInputViewController - blocked/returns nil on iOS 18 KVC approaches - all blocked Hardcoded app support - Works but requires maintaining a list of popular apps and showing multiple buttons instead of a single "Voice" button My questions: When a keyboard extension triggers a URL open (via SwiftUI Link or UIApplication.shared.open), what does sourceApplication contain? The host app or the keyboard extension? Is there any supported way for a main app to know which app it was launched from, specifically when that launch originated from a keyboard extension? How do apps like "Wispr Flow" achieve seamless return-to-app with a single voice button? They seem to auto-return to whatever app the user was in. Environment: iOS 18.0+ Xcode 16 SwiftUI keyboard using KeyboardKit Any guidance on the recommended approach would be greatly appreciated. I understand there may be privacy reasons for limiting host app detection, but the UX of requiring users to manually swipe back (or tap app-specific buttons) is significantly worse than automatic return.

Hey folks! I'm working on a macOS app which has a Finder Quick Action extension. It's all working fine, but I'm hitting a weird struggle with getting the icon rendering how I would like, and the docs haven't been able to help me. I want to re-use a custom SF Symbol from my app, so I've copied that from the main app's xcassets bundle to the one in the extension, and configured it for Template rendering. The icon renders in the right click menu in Finder, the Finder preview pane and the Extensions section of System Settings, but all of them render with the wrong colour in dark mode. In light mode they look fine, but in dark mode I would expect a templated icon to be rendered in white, not black. I've attached a variety of screenshots of the icons in the UI and how things are set up in Xcode (both for the symbol in the xcassets bundle, and the Info.plist) I tried reading the docs, searching Google, searching GitHub and even asking the dreaded AI, but it seems like there's not really very much information available about doing icons for Finder extensions, especially ones using a custom SF Symbol, so I would love to know if anyone here has been able to solve this in the past! Finder preview pane in light mode: Finder preview pane in dark mode: Finder quick action context menu: System Settings extension preferences: The custom symbol in my .xcassets bundle: The finder extension's Info.plist:

In iOS 26, on iPad (as least, but maybe phone too, yet to test) if you tap an iMessage (a second time) that should launch an iMessage App, it does not launch app. Has anyone else seen this - it makes many iMessage app unusable. Steps to reproduce Send a message that launches iMessage on tap. Tap message on recipient's device. Observe iMessage App open. Dismiss iMessage Tap message again Observe nothing happens, app is not launched.

When a user enables an SMS filtering extension via iOS Settings → Messages → Text Message Filtering and selects an app, the following prompt appears: "The developer of [App Name] will receive the text, attachments and sender information in text messages from senders not in your Contacts. Messages may include personal or sensitive information like bank verification codes." This message cannot be modified by developers, and we're receiving complaints and negative reviews from users who are alarmed by it, despite our app not collecting any data. iOS should allow developers to customize this message or reword this message to not make false claims about data collection. We've opened a feedback assistant report here: FB21445903

I am trying to port my sandboxed macOS app completely over to iOS using a Catalyst target. In my macOS app, I use 'SwiftySandboxFileAccess' package to add a symlink to '~/Library/PDF Services' so that the 'share to my app' menuItem shows up in the macOS Print Panel (in the PDF menu). It is critical for the function of my app to have this work on macOS. In the Catalyst target, I am having problems gaining access to '~/Library'. I have tried having the user select the folder, but the picker always returns 'canceled'. I have a test app that illustrates this. The test app tries to coax the user into selecting the library folder and then it is supposed to bookmark the location, but I am unable to get this far. As an aside, macOS should probably automatically add an entry to the Print Panel when the app includes PDF as a document type in XCode; it would save a lot of hassle and avoid having to go outside of the sandbox. However, I cannot wait for that. Hopefully someone can help. Download Test App from iCloud (If you have problems downloading the file, it might be because of some iCloud share setting that I am not aware of. Just tell me and I'll figure something out.)

Hello everyone, I’m experiencing a WeatherKit issue that occurs consistently on both the iOS 26.2 Simulator and a real device running iOS 26.2. Environment: Xcode: latest iOS: 26.2 Occurs on: Simulator AND physical device WeatherKit usage: via WeatherService API (not manual REST) Location Services: authorized (When In Use / Always) Issue: WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "The operation couldn’t be completed." Already verified: WeatherKit capability is enabled for the App ID com.apple.developer.weatherkit entitlement is present Bundle ID matches the App ID App is signed with the correct Team ID Behavior is identical on Simulator and physical device Error occurs before any WeatherKit response is returned Questions: Is this a known issue with WeatherKit on iOS 26.2? Are there any known limitations or requirements for WeatherService related to WeatherDaemon validation? Is there a recommended way to diagnose why WeatherDaemon rejects the request with Code=2? Code: private let weatherService = WeatherService()

In the past I was always able to install every major macOS version on an external drive so that I can test my apps. But now I'm unable to install macOS Tahoe 26 on an external drive. Actually, as far as I'm aware, there are not even official links to macOS 26 installers, but only instructions on how to update to macOS 26 from an existing macOS installation. So I thought I'd install macOS 15 on a separate drive and then update to macOS 26, but whenever I run the macOS 15 installer, tell it to install on the external drive, and reboot after the setup process completes, my MacBook just boots into my main macOS partition as if nothing happened. 3 months ago I somehow managed to install macOS Tahoe beta 1 on an external drive, I don't remember how (but I don't think it was anything crazy); booting into that beta 1 partition and trying to update doesn't work either, as my MacBook again boots into my main macOS partition. I already asked help about the update problem one month ago here, but nobody replied. Could someone at Apple please provide instructions on how one is supposed to install macOS 26 on an external drive (if possible before it becomes available to the public)? Are we supposed to buy a separate Mac for every macOS version that we want to test our apps on?

Dear Apple Engineers： My app utilizes the App Clip experience. I would like to prevent the App Clip card from appearing when the host app is running in the foreground. How can this be achieved? I have observed that Alipay (in China) does not display an App Clip card when the device is tapped against a tag while the app is in the foreground, which indicates that this behavior is possible. Thank you for your assistance.

I have applied for CarPlay support here Apply here to get your app approved for CarPlay use: https://developer.apple.com/contact/carplay/ but have not received any acceptance or answers. Does anyone know what to do?

Hello, How do apps like App Lock implement app-opening from a shield? Is this supported for 3rd-party apps or limited to partners? https://apps.apple.com/us/app/app-lock/id6448239603

Hi, Since I updated my phone to 23A341, my Call filtering app is not blocking calls anymore. Same release checked on iOS 18 phone, it is working. I still see the callkit logs into the Console showing that numbers are loaded into the iOS-managed SQlite DB but the calls are not blocked nor identified. Anyone with the same issue? BR

Problem Description: After upgrading to iOS 26, I discovered that the ExtendedDistanceMeasurement feature in the Nearby Interaction framework is not working as expected. On the same device model, the issue did not occur on iOS 18, but it is present on iOS 26 (including the latest iOS 26.2), and it has started affecting the functionality of my app. I hope this issue can be resolved as soon as possible. Problem Details: On iOS 26 and later versions (including iOS 26.2), when using an iPhone and an Apple Watch both equipped with second-generation UWB chips, enabling isExtendedDistanceMeasurementEnabled initiates the distance measurement process successfully, but the distance information fails to update. The real-time distance between the devices does not display within the app. Affected Devices and Versions: iPhone Model: iPhone 15 Pro Max iOS Version: iOS 26.2 Apple Watch Model: Apple Watch 10 watchOS Version: 26.2 Example Code: The issue can be reproduced by adding the following code from the official sample code: Nearby Interaction Framework Sample Code

A message filter extension is only forwarded SMSs by the OS for filtering, iMessages aren't. But what is the situation with RCS messages? Will they be filterable by a message filtering extension?

My app AirCompare has been in the app store and successfully using WeatherKit to fetch weather since it became available. Now some (not all) users are encountering the following errors: Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Encountered an error when fetching weather data subset; location=<+42.40865786,-88.96911526> +/- 0.00m (speed -1.00 mps / course -1.00) @ 6/23/25, 2:56:47 PM Central Daylight Time, error=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors 2 Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Others are reporting this same problem here in the forums. We need a solution!

I have published the app on the App Store along with its corresponding app clip, my app clip is configured with some advanced experiences for each one of my clients, but whenever some users try to scan an NFC or QR Code they see the card rendering correctly with their configured banner image, but with the message "App Clip Unavailable". The weird thing is that both iMessage and the website to which the associated domain is set and the apple-app-site-association is stored, renders the banner or card correctly, and when the users tap the banner or card they open the advanced app clip experience correctly without any issue. I have attempted to troubleshoot the issue by checking the following: if the app clip is below 15MB if we are using a second level domain in my associated domain both for my app clip and app (excluding the www subdomain). checking if the AASA is correctly stored inside .well-known directory checking the configuration for the advanced experience I opened a case: 102233443873, and added a bunch of videos and screenshot showcasing the issue, but I have not yet received a reply

I'm facing the same problem as addressed in this discussion: After switching from legacy QLGenerators to Preview extensions on macOS I cannot debug the extensions' code in Xcode, anymore: I launch the app with the embedded appex from Xcode in debug mode. When trying to attach to the appex process the following error is reported: Code: 6 Failure Reason: Ensure “AppName Preview” is not already running, and matthias has permission to debug it. User Info: {... } System Information macOS Version 15.4.1 (Build 24E263) Xcode 16.3 (23785) (Build 16E140) Timestamp: 2025-05-12T14:07:14+02:00 I'm using a standard user account (no admin) and might miss some obvious steps. Can someone detail the steps to debug a Preview (or Thumbnail) extension with Xcode 16? For legacy Quick Look plugins I was using "qlmanage", but that's not working on extensions. All the best, Matthias P.S.: Pardon me re-posting my reply as a separate thread, to increase visibility, but I'm quite desperate and couldn't find any solution on the web...