So I'm wondering if Apple makes commission on those payments since they're made in the app. For example a user may pay another user to clean their car. This will be handled with Stripe Connect and their balance, payment history, etc will be displayed in the app. Does Apple charge commission on that? The section the app review guidelines that I'm refrencing is below, but I'm still a little confused. 3.1.3(e) Goods and Services Outside of the App: If your app enables people to purchase physical goods or services that will be consumed outside of the app, you must use purchase methods other than in-app purchase to collect those payments, such as Apple Pay or traditional credit card entry.

We are experiencing intermittent 403 Forbidden errors during Apple Pay on web merchant validation in our production and sandbox environment. Has anyone else started seeing 403 Forbidden errors recently (since mid-2025)? Why would merchant validation be sometimes successful and sometimes fail with 403? Could this be related to new Apple Pay gateway changes or stricter validation rules? Any additional debug steps or permanent solutions we should try? Thank you.

Hello, Apologies if this has been asked before but I have a website that takes subscriptions and payments through PayPal. It's a platform where authors can sell ebooks and anyone who purchaes an ebook, the money goes pretty much directly from the buyer's PayPal to the seller PayPal through the use of PayPal Multiparty where my platform acts as a third party that takes a fee. I'm currently building a React-Native app for my website and coming close to needing to integrate payment solutions. As far as I'm aware, Apple only allows Apple Pay payments for IAP and subscriptions? How would this work for my model? Can I integrate PayPal into Apple Pay like I do with my website? If not, what's the alternative?

Hi, we are trying to verify our domain and we uploaded the file to our domain {DOMAIN}/.well-known/apple-developer-merchantid-domain-association.txt and we can access it. But when we want verify the domain in your platform we can't do it and you see the message "Domain verification failed". How can we verified or if we need change something in our side to verify it? thanks!

I'm implementing Apple Pay in my Flutter web app and I'm following the guidelines for domain verification using the apple-developer-merchantid-domain-association file. When I access the file at https://mydomain.com/.well-known/apple-developer-merchantid-domain-association through my web app, the browser silently downloads the file instead of displaying its content on the webpage. My question is: Is this the expected behavior for the apple-developer-merchantid-domain-association file? Should the browser download the file silently, or is there another step required, such as displaying the content on the webpage for verification purposes? I've consulted some resources and they indicate that the file download is the correct behavior. However, I'd appreciate confirmation from the community to ensure I'm implementing the verification process correctly. Summary is how do we know if apple has verified it?

Hello everyone, We're implementing Apple Pay on the web and are already live, processing transactions. However, we've noticed that occasionally the onlinePaymentCryptogram returned in the paymentData contains spaces, causing it to be rejected by acquirers. Has anyone else encountered this issue? Any insights would be greatly appreciated.

We created apps for many credit unions in Canada. Some of those apps has the feature to directly add users' debit cards to Apple Wallet (which is called by Apple as "in-app provisioning"). The feature has been working fine for at least 6 years for many credit unions. Recently, after updating one of those existing apps, we found out that the in-app provisioning is no longer working. Found it very strange, as we didn't touch the code base related to this feature for a very long time. One thing we found out is that the option to add in-app provisioning entitlement is missing during generating "provisioning profile" for the app. Is this a misconfiguration by App? Or do we need to request for additional entitlement migration as mentioned in the page: https://developer.apple.com/help/account/reference/provisioning-with-managed-capabilities ? Apple, please help, it's rather urgent.

We have updated the PNO metadata to include the associatedApplicationIdentifiers for our wallet extensions and the issuer app. While we are able to successfully provision the card to Apple Wallet via pull provisioning, we are unable to retrieve the payment passes that have already been provisioned. How can we address this issue? let passLibrary = PKPassLibrary() let paymentPassLibrary = self.passLibrary.passes(of: .secureElement) paymentPassLibrary is an empty array even though we have passes provisioned.

Hello! We are using "Apple Pay Web Merchant Registration API" https://developer.apple.com/documentation/applepaywebmerchantregistrationapi Recently we successfully updated the Payment/identity certificates at our main merchant ID And we have a few questions: Do we need make the Domain verification for all of our sub-merchants again after the Certificates update? How we can check the expiration of domain verification of merchants that we integrate trough API endpoint (https://apple-pay-gateway.apple.com/paymentservices/registerMerchant), and do verified domains via API have an expiration date??? How we can understand does the our universal domain verification file (apple-developer-merchantid-domain-association) have expiration too? Thanks in advance!

Hello, I could not find where I can change the sellers name. Why is the first letter always capitalized? Do I have to change it via Developer-Account or App-Development or Payment-Provider?

Hello, We’re seeing an issue where the Apple Pay button is visible in Safari but not clickable for certain users, while it works normally for others. This happens on our site (https://store-qa2.enphase.com/ ) as well as on other sites for the same affected users. Currently, we display the Apple Pay button based on the following condition: Boolean(window.ApplePaySession) && ApplePaySession.canMakePayments(); For affected users, the button shows up as expected, but it’s not interactive. All users (both affected and unaffected) are on the latest versions of Safari and macOS/iOS. Could someone clarify what additional conditions Safari/Apple Pay requires for the button to be fully functional? And under what circumstances could it be visible but not clickable?

Hello Apple Devs, We’re currently trying to integrate Apple Pay on the web using Apple Pay JS. We've followed the official documentation closely, but we're running into a blocker during the merchantSession validation phase. We successfully retrieved a merchantSession, which looks like this: json { "displayName": "Our Name", "domainName": "https://pay.ourdomain.co", "epochTimestamp": , "expiresAt": ****************, "merchantIdentifier": "", "merchantSessionIdentifier": ", "nonce": "", "operationalAnalyticsIdentifier": our name "t:", "pspId": "", "retries": 0, "signature": "*****************..." } Issue: Shortly after initiating the session, we receive a cancel event with the following info: ApplePayCancelEvent { type: "cancel", sessionError: { code: "unknown", info: {} } } We're unsure what causes the cancellation. There are no clear error messages or hints in the logs to identify what went wrong. What We’ve Checked: The merchantSession is returned successfully from our backend. The domainName matches our frontend domain (https://pay.durdomain.co). The session hasn’t expired when tested. We're using Apple Pay JS APIs as described in the documentation. Help Needed: What can trigger an ApplePayCancelEvent with an "unknown" error code? Any insight or guidance would be deeply appreciated. Thanks in advance!

Bank Accounts details are outdated and status is stack on processing with error: "Your banking updates are processing, and you should see the changes in 24 hours. You won't be able to make any additional updates until then." This is now stack for a few years since we activated a previous Apple developer account. we must change banking details as it holds up development of an app with in-app purchases. Finance department has been contacted and they do not answer What shall we do? senior support staff keep referring to finance department and is not helping

Dear Apple Developer Support, I would like to request a technical escalation to the engineering team regarding an ongoing issue with Apple Pay domain verification. Error returned by Apple Even though Apple’s request to our domain returns HTTP 200, the verification still fails with: resultCode: 13014 resultString: "Domain verification failed. Review your TLS Certificate configuration to confirm that the certificate is accessible and a supported TLS Cipher Suite is used." requestUrl: https://developer.apple.com/services-account/QH65B2/account/ios/identifiers/verifyDomain TLS Certificate Validation We performed a full TLS analysis: Certificate issued by Sectigo Public Server Authentication CA DV E36 (public trusted CA) Full and correct certificate chain No handshake errors Configuration fully valid SSL Labs rating: A From our side, the TLS configuration is confirmed to be correct. Accessibility of the .well-known file The file is publicly and accessible It returns 200 OK and the content is exactly identical to the file downloaded from the Apple Developer Portal, without any modification. Our network team confirmed that Apple’s verification request also receives HTTP 200 when pressing “Verify” in the Apple Developer Console. Network-side findings We monitored Apple’s request in real time. Findings: TLS handshake succeeds No cipher mismatch File delivered correctly Status: 200 OK No redirect or transformation applied Despite this, Apple still returns error 13014. Request for engineering review We kindly request that an Apple engineer verify the following: The actual TLS handshake performed by Apple's verification service (cipher suite, protocol negotiation, SNI, trust chain). Whether the Sectigo issuing CA is fully trusted and supported by your domain-verification backend. If there is an internal reason behind error 13014—since the external message does not provide actionable details. Whether the response is rejected for reasons other than TLS, given that the file is accessible and the request returns 200. The exact condition that leads Apple to report “TLS Certificate configuration is incorrect” in this case. This issue is blocking an urgent deployment and must be resolved as soon as possible. Existing case reference Case ID: 102760005987 We are fully available to provide: full response headers packet captures (PCAP) SSL/TLS diagnostics file integrity checks server configuration details or join a technical call (Teams / WebEx) Thank you in advance for the escalation. Andrea

Hello, I'm using PassKit with to perform Apple Pay payment in a financial application. Our approach are: On iOS application, define PKMerchantCapability threeDSecure and credit, perform apple pay experience and get the encrypted response. On PCI service, receive the encrypted data Payment token, decrypt this data, and use to perform the payment. The problem is, in MasterCard transaction the eciIndicator is missing. I want to know if has some rule or problem about it.

Hello, I am following up on my previous feedback (Feedback ID: FB17175593) regarding the in-app provisioning failure for Apple Pay. In that report, I detailed errors encountered during the card addition process (notably issues related to a missing teamID and cryptographic material errors). Could you please provide an update on the investigation progress? I appreciate your assistance and look forward to your response.

Hello, We are currently developing an application that uses the Host-based Card Emulation (HCE) entitlement to enable corporate access functionality. With this entitlement, we have successfully established HCE communication and can interact with our access control systems to unlock doors. Our question is related to improving the user experience: We would like this access functionality to work without requiring the app to be in the foreground, as this adds friction for users during entry. Specifically, we would like to know: Is it possible for our app to coexist with Apple Wallet as the default contactless app, so that: Our app handles NFC interactions for corporate access (e.g., opening doors). Apple Wallet remains the default for payments. If that coexistence is not possible, and our app is set as the default contactless app, Will the system still need to launch our app into the foreground to complete a transaction (e.g., to emulate the NFC card)? Or is there a way to trigger HCE responses in the background (e.g., using a background process or service extension)? Any guidance on how to configure the app for optimal background access behavior, while maintaining compatibility with Wallet, would be greatly appreciated. Thank you in advance.

I am currently working on decrypting Apple Pay tokens with Laravel PHP, and I have encountered a few uncertainties regarding the decryption process and the usage of AES-GCM. Could you please clarify the following points: Algorithm Confirmation: Am I using the correct algorithm for decrypting the data key? Specifically, I am utilizing AES-256-GCM with the algorithm ID "id-aes256-GCM" (2.16.840.1.101.3.4.1.46), as specified in the documentation. Is this the recommended algorithm for decrypting the Apple Pay token's data key? Authentication Tag: In the decryption process, it seems that an authentication tag is required, but I am not sure where to obtain it from. Could you confirm how the authentication tag is generated or provided during the encryption process? If the tag is part of the token or is transmitted separately, could you clarify where I can retrieve it in order to proceed with the decryption successfully? IV and Other Parameters: I am using an initialization vector (IV) of 16 null bytes (00000000000000000000000000000000) as specified in the documentation. Could you confirm that this is correct and aligns with the expected parameters for the AES-GCM decryption? Are there any other specific parameters or considerations I should be aware of when implementing the decryption of Apple Pay tokens? GCM vs Other Encryption Modes: Can you confirm that AES-GCM is the preferred and required encryption mode, or is there any flexibility to use other modes (e.g., AES-CBC) without compromising security? Your guidance would be greatly appreciated to ensure I am following the correct decryption procedure for Apple Pay tokens. Thank you in advance for your support.

Hello, I'm building an expense management app and have the necessary FinanceKit entitlements. However I'm based in India and hence do not have access to an Apple Card. Is there anyway to test FinanceKit with some sort of mock data? I have tried following the developer documentation and built a minimal implementation to share via Testflight to my users. However it's failing to get any transaction data. I'm unable to debug the code myself and if anyone here has valid entitlements along with Apple Card, I'd appreciate if you could debug an example project I made below: https://github.com/tanmays/FinanceKitExample Feedback #FB14136552

Hello All - I'm attempting to enable my companies app to add credit card to Apple Wallet. Part of our app enables customers to generate new virtual cards on demand and I'm attempting to enable the ability to add these cards to the Apple Wallet. Everything seems to be working all the way to the final stage of the process where I get a PKPassKitErrorDomain systemCancelled and I can't seem to find any clues as to why the system is canceling. For context - I have the com.apple.developer.payment-pass-provisioning entitlement. I have both the Wallet and In-App Provisioning capabilities enabled in the App. I have defined a PKAddPaymentPassViewControllerDelegate class that implements both the generateRequest and didFinishAdding methods. I'm leveraging PKAddPaymentPassViewController in SwiftUI by using a UIViewControllerRepresentable implementing class that returns the view controller properly when makeUIViewController is called. I build a PKAddPaymentPassRequest object and ensure that it is properly filled with encryptedPassData, activationData, and ephemeralPublicKey. As a user I'm able to go to the virtual card view, open the instance of PKAddPaymentPassViewController, select the destination for the card, see the Add Card information. I get to the point where the view tells me it's contacting the card issuer and then I get an error message "Could Not Add Card - Try again later or contact your card issuer for more information" with a "Set Up Later" button. I then get the system canceled error. I should mention that I'm able to add these virtual cards manually via the Apple Wallet. The process works similarly but requires me to provided an OTP to conclude the process. This flow works and I have active cards in my wallet. I'm having a very hard time figuring out how to try and debug this issue further. The only error that the system returns is the system canceled notice. Any insight into where I might be missing something or how to debug the issue further would be greatly appreciated. Any thought on how I could debug this further would also be greatly appreciated. Thanks in advance - AYAL