I have a swift app which I'm running via a LaunchAgent. It sends a video feed via multicast UDP. While it works if I manually allow via Privacy & Security - Local Network (allowing the app to find devices on local network), I cannot get AllowedEthernetLocalNetworkAddresses to work. I have attempted to do so with my app and with ffmpeg (installed via homebrew). Neither seems to respect the AllowedEthernetLocalNetworkAddresses setting outlined in TN3179: Understanding local network privacy | Apple Developer Documentation. I have attempted allowing 239.0.0.0/8, 224.0.0.0/4, 239.255.0.0/16, 239.255.1.1/32. I see no change after a reboot with any of these values in the array: sudo defaults write com.apple.network.local-network AllowedEthernetLocalNetworkAddresses -array "239.0.0.0/8" This is on macOS 26.5.1, and I am only connected via ethernet. Am I missing a configuration piece? Thanks!

Hi, we are looking for a solution to install an extension to Microsoft PowerPoint app in a way that's compatible with the new macOS 15 behavior for Group Containers content. PowerPoint extensions Microsoft PowerPoint can be extended by PowerPoint Add-in (.ppam) files. These files must be installed in the app's container at this location: ~/Library/Group Containers/UBF8T346G9.Office/User Content.localized/Add-Ins.localized/ The PPAM file must be also registered in the MicrosoftRegistrationDB.reg file which is a sqlite database stored at this location: ~/Library/Group Containers/UBF8T346G9.Office/MicrosoftRegistrationDB.reg These locations can be access by non-sandboxed app on macOS 14 and earlier. Slido integration Our Slido app for macOS is distributed outside the Mac App Store, it is not sandboxed and it signed and notarized. The Slido app will install the PPAM file to the documented location and register it in the database. This installation did not require additional user approval on macOS 14 and older. With changes to macOS 15, a new permissions dialog is shown with this text: "Slido" would like to access data from other apps. This will allow Slido to integrate with Microsoft PowerPoint app. [Don't Allow] [Allow] We understand this is a security feature, yet we would like to make the experience for customers much better. As users are able to save PPAM files to the location by themselves without additional permissions, they expect the Slido app would be able to do so as well when run in the user context. Slido installs its files to this location: ~/Library/Group Containers/UBF8T346G9.Office/User Content.localized/Add-Ins.localized/SlidoAddin.localized/ Can we obtain com.apple.security.temporary-exception.files.home-relative-path.read-write to the SlidoAddin.localized folder? Even when we are different TeamID? Can we obtain a user permission which will be persisted so next time the Slido app can verify its files and uninstall them without further prompts? By having access to the SlidoAddin.localized folder our app would not be able to access any other data in Microsoft PowerPoint. We understand accessing the MicrosoftRegistrationDB.reg file is more sensitive and getting exception to access it would not be feasible. But we are trying to find out our options to make the experience seamless as that's what is expected by our customers on Apple platform. I am thankfully for any guidance and constructive feedback. Jozef, Tech Leader at Slido integrations team

Hi Apple Community, Problem : Should be able to use my iDP password when I try to unlock my macOS local User Account.
 Password should sync across my macOS local User Account, when my User Account Password in iDP Changed
 Should have a provision to create a on-demand macOS local account with password of iDP Should be able to Create Primary Account in Automated Device Enrollment with password synced to iDP ( Simplified PSSO in Setup Assistant ) Solution : These can be solved if the Identity Provider implements Platform SSO , but not being implemented by all major Identity Providers Except major iDPs like Okta, Microsoft, Ping 
Since Platform SSO Offers the necessary framework and provision that satisfy the above needs I planned to make a open-source initiative to bridge in PSSO and Oauth ROPG to connect with Any OpenID Provider that supports Oauth ROPG 
I KNOW PSSO DOESN’T MEANT FOR THIS AND NEEDS TO BE IMPLEMENTED BY IDP, AND MEANINGFUL SSO TOKENS CAN BE ONLY ISSUED BY THEM TO HELP THE SSO EXTENSION 
But the native login Experience, FileVault Synchronization, Keychain Unlock everything being handled by OS in PSSO. I thought its best to go in this way The Attachment Includes the Components, Design Decisions of this Project , Questions in the PSSO Framework workflow. Including some Questions from new WWDC26 OpenID Authentication Method introduced in PlatformSSO Please help with the Questions in the Attachment and post if there is any suggestions on the workflow I described Filed Feedback with FB23065453

Hi Apple Community & Apple Team, 
Problem : Should be able to use my iDP password when I try to unlock my macOS local User Account.
 Password should sync across my macOS local User Account, when my User Account Password in iDP Changed
 Should have a provision to create a on-demand macOS local account with password of iDP Should be able to Create Primary Account in Automated Device Enrollment with password synced to iDP ( Simplified PSSO in Setup Assistant ) Solution : All the above Problems can be solved if the Identity Provider implements Platform SSO , but not being implemented by major Identity Providers Except Okta, Microsoft, Ping 
Since Platform SSO Offers the necessary framework and provision that satisfy the above needs I planned to make a open-source initiative to bridge in PSSO and Oauth ROPG to connect with Any OpenID Provider that supports Oauth ROPG ( Resource Owner Password Grant ) 
ITS RIGHT THAT PSSO DOESN’T MEANT FOR THIS AND NEEDS TO BE IMPLEMENTED BY IDENTITY PROVIDER, AND MEANINGFUL ID TOKENS CAN BE ONLY USED BY THEM TO HELP THE SSO EXTENSION 
But the native login Experience, FileVault Synchronization, Keychain Unlock everything being handled by OS in PSSO. I thought its best to go in this way The Attachment Includes the Components, Design Decisions of this Project , Questions in the PSSO Framework workflow. Including some Questions from new WWDC26 OpenID Authentication Method introduced in PlatformSSO Please help with the Questions in the Attachment and post if there is any suggestions on the workflow I described Filed a Feedback with ID FB23065453

When use apple login, It always failed, other app developer by me is success, but the new app failed, the code is the same, it tips Sign up not Completed

I have been working on integrate sign in with apple. I failed for a while. So I download the demo app from this link: https://developer.apple.com/documentation/authenticationservices/implementing-user-authentication-with-sign-in-with-apple And change the bundle id and add it to my paid apple developer account team. Then run it and test it on my all device. It always failed with showing sign up not completed and the log like below: Authorization failed: Error Domain=AKAuthenticationError Code=-7003 "(null)" UserInfo={AKClientBundleID=com.shuaichang.testsignin} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)" authorizationController error: The operation couldn’t be completed. (com.apple.AuthenticationServices.AuthorizationError error 1001.)

I was experiencing a weird sign in error when using apple sign in with my app and wanted to put it here for anyone else who might experience it in the future, and so apple can make this requirement more clear. I was using CloudKit and apple sign in. If you are not using both this probably does not apply to you. Every time I would go to sign in in the iOS simulator I would enter my password, hit "sign in", and everything just froze. The very odd reason for this is if you are using iCloudKit and apple sign in you need to go to specifically the "identifiers" in the "Certificates, Identifiers & Profiles" menu (https://developer.apple.com/account/resources/identifiers/list). And from there you specifically need an App ID Configuration with apple sign in enabled. From there you have to have the same exact bundle identifier in Xcode under project settings(not an upper tab just click your project in the left panel). And that should allow you to both pass validation and have your sign in work. Hope this helps!

Hi Community, We've implemented Sign In with Apple in our application. Our domains are properly registered in the developer console, but we're experiencing inconsistent email functionality with Apple's privacy email service. Some domains work correctly while others show delivery problems, even though all domains have identical configurations. Apple's console displays green verification status for all domains, yet testing reveals that emails to privacy-protected accounts don't arrive as expected. We're using SendGrid as our email service provider, and all domains have valid authentication records (SPF, DKIM, DMARC) in place. Has anyone encountered similar inconsistencies with Apple's privacy email service? Would appreciate any configuration tips or troubleshooting guidance. Thanks.

I am having trouble with one of my apps that will not let me log in via Apple Sign In. I am using Firebase and Firebase UI for the sign in process. I have many other apps with the same exact config that currently work just fine, but this one I have gone as far as completely deleting the targets and rebuilding and it will not return from the login screen I checked the following: Sign in with Apple ID Capability is available in XCode and on the dev certificate on developer.apple.com I have also toggled both of them on and off. I have double checked the config in Firebase to turn on the Apple Login identifier. Again I have toggle it on and off. I have cleaned the project multiple times to no avail. I have logged out and back into my developer account in XCode. It seams like after I put in the correct password to log in, it just never returns to the app, there is no logging. I do get a notified(shaking input box) if I put in an incorrect password, but when I put in the correct one, the login window never dismisses and my app is not notified. I checked the Console and the last message from akd on a working app is: Notifying client (bundle) of credential state change 1. Remote view sent a finish event On the one not working, using the same user and password akd returns: SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 "M2 missing (bad password) I have 100% verified I am putting in the correct user password. I was only notified of this issue because Policy is having the same issue logging in during App Review. Also, if I put in a bad password the input window shakes and when this is happening, the input window is not shaking

Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!

We're integrating Sign in with Apple into our iOS app using both SwiftUI and UIKit. The Apple ID login UI appears correctly on real devices, but after tapping Continue, the system immediately stops and shows code 1001. This issue happens across multiple devices and Apple ID accounts, even with no prior login history. We’ve confirmed the following: Sign in with Apple is enabled in both Developer Portal and Xcode Capabilities Automatic signing and provisioning are set correctly Device is signed into iCloud and system time is synced Performed clean build, app reinstall, and other standard debugging steps We suspect that the sign-in process may not be completing properly due to some kind of account or server-side restriction, and we’d appreciate any insights into this behavior.

Hi, I've been developing an app with a server. I'm hosting the server on an IPv6-ONLY network that's hidden behind the CloudFlare, so it works flawlessly from the clients point of view, but if server needs to access external resources, they need to be accessible over IPv6. As it turns out, appleid.apple.com doesn't support IPv6, and the Sign In with Apple happens with the help of my server. So, I can't sign users in as Apple doesn't support IPv6 traffic on appleid.apple.com. Are there any plans to support IPv6 in the near future, or should I work on the networking setup to enable IPv4 just for the Apple SSO? Or maybe there's a clever workaround I'm missing?

Hey there, im getting Sign up not complete! even with the official template https://developer.apple.com/documentation/authenticationservices/implementing-user-authentication-with-sign-in-with-apple my developer account is recently renewed, which it has expired for a bit i am using automatic managed signing I have a feel something went wrong my apple developer account id, and also this cause me getting invalid client when sign in with app on web app.

I am implementing Apple Sign-In for a multi-platform application, specifically for the web component using the REST API flow. I am encountering an invalid_request Invalid web redirect url error when attempting to use a newly registered redirect URL. Here are the details: Original Test URL: I initially registered a redirect URL, let's call it [Your Original Test Redirect URL, e.g., https://test.yourdomain.com/auth/callback], for testing purposes. This URL worked correctly. New Service URL: I then registered a second redirect URL, [Your New Service Redirect URL, e.g., https://www.yourdomain.com/auth/callback], intended for my production service. This URL was registered approximately 5 days ago (including the weekend). The Problem: The new service URL ([Your New Service Redirect URL]) is still not working and consistently returns the invalid_request Invalid web redirect url error. Puzzling Behavior: Furthermore, I have since deleted the original test URL ([Your Original Test Redirect URL]) from the Service ID configuration in the Apple Developer portal. However, the deleted test URL still appears to function correctly when I use it. This situation is highly confusing: The newly registered URL is not working after 5 days, while the URL I have deleted from the configuration is still operational. The Service ID in question is [Your Service ID, e.g., com.yourdomain.service]. Could you please investigate why the new redirect URL ([Your New Service Redirect URL]) is not becoming active and is returning the invalid_request error, and also explain why the deleted URL ([Your Original Test Redirect URL]) remains functional? Any guidance or assistance you can provide to resolve this issue with the new URL would be greatly appreciated. Thank you for your time and support. Sincerely, I have the exact same problem. The newly registered URL is not working after 5 days, while the URL I have deleted from the configuration is still operational. In addition to the above problem, I also get a response of 'invalid_client' when I newly register a service in configuration. Please check it out as it needs to be resolved quickly.

Since a few days, we are hitting AuthorizationError 1000 / 1001 whenever we try to use Sign in with Apple for a new app. We have added entitlements to the app in both release and debug, and setup the services id. Many other devs are complaining about the same issue lately, and it's possible to reproduce on a fresh app id, see this thread: https://www.reddit.com/r/flutterhelp/comments/1lf6kmq/sign_in_with_apple_signup_not_completed

I am asking about the apple Sign in implementation. ▫️ problems eas local build or test flight, I get a “Could not complete registration” message. When I check the console, I see the following error message. akd SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 UserInfo={NSDescription=<private>, Status=<private>} ▫️ Assumption ・Developed with Expo ・"expo-apple-authentication":"^7.2.4" ・Two apps are developed at the same time, using supabase, firebase, but both have the same error ・On Xcode, on app ids, apple sign in capability is turned on ・Service ids is set to domain, return url ・keys is created ・Internal test of testfligt is set to deliver

We're integrating Sign in with Apple into our iOS app The Apple ID login UI appears correctly on real devices, but after tapping Continue, the system immediately stops and shows code 1001. This issue happens across multiple devices and Apple ID accounts, even with no prior login history. We’ve confirmed the following Sign in with Apple is enabled in both Developer Portal and Xcode Capabilities Automatic signing and provisioning are set correctly Device is signed into iCloud and system time is synced Performed clean build, app reinstall, and other standard debugging steps We suspect that the sign in handshake process may not be completing properly due to some kind of account or server-side restriction, and we’d appreciate any insights into this behavior.

I'm developing a Unity iOS app using the official "Sign In with Apple" Unity plugin (v1.5.0), and I'm encountering persistent errors during authentication. Here’s the full context: App Info: Unity version: 6000.0.32f1 Bundle ID: com.pfcgaming.applesignin Sign In with Apple enabled in the Apple Developer portal Real iOS device, not simulator Error Logs: txt Copy Edit Authorization failed: Error Domain=AKAuthenticationError Code=-7003 "(null)" UserInfo={AKClientBundleID=com.pfcgaming.applesignin} ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)" Description: The operation couldn’t be completed. No credentials available for login. What I’ve Done So Far: Verified "Sign In with Apple" is enabled under the App ID in developer.apple.com. Provisioning profile has been regenerated with correct entitlements. Xcode project has the “Sign In with Apple” capability added. Tested on multiple real iOS devices with iCloud + Keychain enabled. Tried both PerformQuickLogin() and LoginWithAppleId() approaches in the plugin. My Observations: These errors started occurring right after enabling "Sign In with Apple" in the developer portal. Based on some community feedback, there may be a backend propagation delay after enabling SIWA (Sign In With Apple) which might cause these errors. Questions: Is it expected to receive error -7003 or 1001 immediately after enabling SIWA in the Developer Portal? How long does it typically take for entitlement changes to fully propagate? Is there any Apple-recommended workaround to test during this wait time? Any insight or confirmation would be helpful. Thanks in advance!

Apple Sign In - "Sign up not completed" Error in Development Build (React Native / Expo) Problem Summary I'm implementing Apple Sign In in a React Native app using expo-apple-authentication. The Apple sign-in dialog appears as expected, but after tapping "Continue," it displays the message: "Sign up not completed". No credential is returned, and the promise eventually rejects with ERR_REQUEST_CANCELED. App Configuration Platform: React Native (Expo SDK 52) Library: expo-apple-authentication v7.1.3 Target: iOS development build (not Expo Go) Bundle ID: com.example.appname.nativetest (new App ID created for testing) Apple Developer Console Setup (Reviewed Carefully) App ID Explicit App ID (not a wildcard) "Sign In with Apple" capability enabled No associated Services IDs or Sign In with Apple Keys Provisioning Profile Development profile created for the test App ID Profile includes the test device and development certificate Installed successfully and used to sign the app Certificates and Signing Valid Apple Developer Program membership Development certificate installed and selected during build App installs and launches properly on the test device Implementation Attempts Attempt 1: Supabase OAuth Method Initially tried using Supabase’s built-in Apple OAuth provider: Configured with team ID, key ID, and JWT credentials Proper redirect URLs and scheme were in place Resulted in OAuth URL pointing to Supabase instead of Apple, with incomplete client ID Ultimately moved to native implementation for improved control and reliability Attempt 2: Native Apple Sign In (Current Approach) Using expo-apple-authentication with the following code: const credential = await AppleAuthentication.signInAsync({ requestedScopes: [ AppleAuthentication.AppleAuthenticationScope.FULL_NAME, AppleAuthentication.AppleAuthenticationScope.EMAIL, ], }); Relevant app.config.js Section: ios: { bundleIdentifier: 'com.example.appname.nativetest', usesAppleSignIn: true, infoPlist: { NSAppTransportSecurity: { NSAllowsArbitraryLoads: true, NSAllowsLocalNetworking: true, }, }, }, plugins: ['expo-apple-authentication'] Observed Behavior AppleAuthentication.isAvailableAsync() → true Credential state → NOT_FOUND (expected for new user) Apple Sign In dialog appears and allows interaction User taps "Continue" → dialog reports "Sign up not completed" Eventually returns: [Error: The user canceled the authorization attempt], code ERR_REQUEST_CANCELED Confirmed Working Aspects AppleAuthentication API is available and initialized App is signed correctly and launches on the physical test device Apple Sign In dialog appears with correct styling and options Same result observed across both Wi-Fi and cellular networks Clean Setup and Debugging Performed Removed all previous build artifacts Created a new App ID and new provisioning profile Rebuilt the app using expo run:ios --device Validated entitlements and provisioning assignments Removed any Services IDs and Apple Sign In keys used in previous attempts Verified ATS (App Transport Security) policies allow dev-time communication Environment Information Device: iPhone (not simulator) iOS Version: 18.5 Xcode: Latest version Apple ID: Developer account with 2FA enabled Build Method: EAS CLI using expo run:ios --device Open Questions Has anyone experienced the "Sign up not completed" issue with a clean native implementation in Expo? Are there known limitations when testing Apple Sign In in local development builds? Could prior Apple ID authorization attempts impact sign-in behavior during testing? Are there any additional configuration steps, Info.plist changes, or entitlements required beyond those listed above? Thank you in advance for any suggestions or guidance. We’re hoping this is simply a configuration detail that needs to be adjusted.

Hello, I am at wits' end with the Apple Sign-in api. I have tested in stage and it works beautifully, but when i push to production it gives me the error "invalid_client". I'm confident the setup is correct, when I asked Apple for help over the phone, they sent me a few forums with no answers. Has anyone had the same issue? How did you resolve? Could it be because I have two app IDs and two service IDs? (prod + stage) Help!