Hi, Before I begin my investigation, I want to explain our code-level support process for issues related to Sign in with Apple—as the issue you’re reporting may be the result of any of the following: An error in your app or web service request. A configuration issue in your Developer Account. An internal issue in the operation system or Apple ID servers. To ensure the issue is not caused by an error within your app or web service request, please review TN3107: Resolving Sign in with Apple response errors to learn more about common error causes and potential solutions when performing requests. If the technote does not help identify the cause of the error, I need more information about your app or web services to get started. To prevent sending sensitive JSON Web Tokens (JWTs) in plain text, you should create a report in Feedback Assistant to share the details requested below. Additionally, if I determine the error is caused by an internal issue in the operating system or Apple ID servers, the appropriate engineering teams have access to the same information and can communicate with you directly for more information, if needed. Please follow the instructions below to submit your feedback. Gathering required information for troubleshooting Sign in with Apple authorization and token requests For issues occurring with your native app, perform the following steps: Install the Accounts/AuthKit profile on your iOS, macOS, tvOS, watchOS, or visionOS device. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS, macOS, tvOS, watchOS, or visionOS device. Create a report in Feedback Assistant, and ensure your feedback contains the following information: the primary App ID or Bundle ID the user’s Apple ID, email address, and/or identity token the sysdiagnose gathered after reproducing the issue the timestamp of when the issue was reproduced screenshots or videos of errors and unexpected behaviors (optional) For issues occurring with your web service, ensure your feedback contains the following information: the primary App ID and Services ID the user’s Apple ID, email address, and/or identity token the failing request, including all parameter values, and error responses (if applicable) the timestamp of when the issue was reproduced (optional) screenshots or videos of errors and unexpected behaviors (optional) Important: If providing a web service request, please ensure the client secret (JWT) has an extended expiration time (exp) of at least ten (10) business days, so I have enough time to diagnose the issue. Additionally, if your request requires access token or refresh tokens, please provide refresh tokens as they do not have a time-based expiration time; most access tokens have a maximum lifetime of one (1) hour, and will expire before I have a chance to look at the issue. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above (for your native app or web service) is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Sign in with Apple client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, Please see TN3159: Migrating Sign in with Apple users for an app transfer for more information on the expected end-to-end app transfer and user migration flow. Additionally, if you'd like for the iCloud and App Store engineering teams to confirm if the errors are related to a revoked authorization to previous users accounts, please submit a report via Feedback Assistant and include the following information: Gathering required information for troubleshooting Sign in with Apple user migration To prevent sending sensitive JSON Web Tokens (JWTs) in plain text, you should create a report in Feedback Assistant to share the details requested below. Additionally, if I determine the error is caused by an internal issue in the operating system or Apple ID servers, the appropriate engineering teams have access to the same information and can communicate with you directly for more information, if needed. Please follow the instructions below to submit your feedback. For issues occurring with your user migration, ensure your feedback contains the following information: the primary App ID and Services ID the client secret for the transferring team (Team A) and the recipient team (Team B) the failing request(s), including all parameter values, and error responses (if applicable) the timestamp of when the issue was reproduced (optional) screenshots or videos of errors and unexpected behaviors (optional) Important: If providing a web service request, please ensure the client secret (JWT) has an extended expiration time (exp) of at least ten (10) business days, so I have enough time to diagnose the issue. Additionally, if your request requires access token or refresh tokens, please provide refresh tokens as they do not have a time-based expiration time; most access tokens have a maximum lifetime of one (1) hour, and will expire before I have a chance to look at the issue. Submitting your feedback Before you submit via Feedback Assistant, please confirm the requested information above (for your native app or web service) is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Sign in with Apple client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, Before I begin my investigation, I want to explain our code-level support process for issues related to Sign in with Apple—as the issue you’re reporting may be the result of any of the following: An error in your app or web service request. A configuration issue in your Developer Account. An internal issue in the operation system or Apple ID servers. To ensure the issue is not caused by an error within your Private Email Replay configuration, please review Configuring your environment for Sign in with Apple to learn more about registering your email sources and authenticated domains. To prevent sending sensitive message details in plain text, you should create a report in Feedback Assistant to share the details requested below. Additionally, if I determine the error is caused by an internal issue in the operating system or Apple ID servers, the appropriate engineering teams have access to the same information and can communicate with you directly for more information, if needed. Please follow the instructions below to submit your feedback. Gathering required information for troubleshooting Private Email Relay with Sign in with Apple For issues occurring with your email delivery, ensure your feedback contains the following information: the primary App ID and Services ID the user’s Apple ID and/or email address the email message headers the Private Email Relay Service or Hide My Email message delivery failure, and SMTP error codes Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Sign in with Apple client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

The revoke tokens endpoint (/auth/revoke) is the only way to programmatically invalidate user tokens associated to your developer account without user interaction. This endpoint requires either a valid refresh token or access token for invalidation, as Sign in with Apple expects all apps to securely transmit and store these tokens for validation and user identity verification while managing user sessions. If you don’t have the user’s refresh token, access token, or authorization code, you must still fulfill the user’s account deletion request and meet the account deletion requirement. You'll need to follow this workaround to manually revoke the user credentials: Delete the user’s account data from your systems. Direct the user to manually revoke access for your client. Respond to the credential revoked notification to revert the client to an unauthenticated state Important: If the manual token revocation isn’t completed, the next time the user authenticates with your client using Sign in with Apple, they won’t be presented with the initial authorization flow to enter their full name, email address, or both. This is because the user credential state managed by Sign in with Apple remains unchanged and returns the.authorizedcredential state, which may also result in the system auth UI displaying the “Continue with Apple” button. Respond to the credential revoked notification Once the user’s credentials are revoked by Apple, your client will receive a notification signaling the revocation event:  For apps using the Authentication Services framework to implement Sign in with Apple, register to observe the notification named credentialRevokedNotification. For web services, if an endpoint is registered for server-to-server notifications, Apple broadcasts a notification to the specified endpoint with the consent-revokedevent type. When receiving either notification, ensure you’ve already performed the following operations to meet the requirements of account deletion: Deleted all user-related account data, including: The token used for token revocation; Any user-related data stored in your app servers; and Any user-related data store in the Keychain or securely on disk in the native app or locally on web client. Reverted the client to an unauthenticated state. Securely store user tokens for account creations For all new user account creations, follow the expected authorization flow below: Securely transmit the identity token and authorization code to your app server. Verify the identity token and validate the authorization code using the /auth/token endpoint.  Once the authorization code is validated, securely store the token response — including the identity token, refresh token, and access token. Validate the refresh token up to once per day with Apple servers (to manage the lifetime of your user session and for future token revocation requests), and obtain access tokens (for future token revocation, app transfer, or user migration requests). For information about verifying an identity token and validating tokens, visit Verifying a user and Generate and validate tokens. If you have questions about implementing these flows, including client authorization, token validation, or token revocation, please submit a Technical Support Incident.

Hi! We're having issues with the sign in flow, starting today. As per the documentation, the issuer of the tokens should be https://appleid.apple.com sign in docs. But in the published configuration, it is now stated as https://account.apple.com metadata endpoint. Once the token is received through the sign in flow, the issuer is however still appleid.apple.com. This is causing problems for us where we expect the issuer in the metadata endpoint to be the same as the actual token issuer. What is correct here?

Our app's Sign in with Apple never completes. Apple's create-account sheet renders fully (name + share/hide-my-email step), then the final server submit fails and shows the "Sign Up Not Completed" sheet. The authorization callback returns ASAuthorizationError.canceled (1001) with no userInfo — even though the user did not cancel. Reproduced on multiple physical devices and multiple Apple IDs (all with 2FA), on iOS 26.5.1, since our first build. Team ID: 24XS837728 App ID: C54N9Q226H (bundle com.sucsessmaperrs.careerAssessmentApp) Verified on our side: com.apple.developer.applesignin = [Default] present in the distribution build (codesign -d --entitlements); embedded profile is the explicit App Store profile for the App ID (not wildcard). App ID has Sign in with Apple enabled as a primary App ID; capability deleted + recreated via the App Store Connect API today, no change. Firebase consumes the identity token; the failure is in Apple's UI before our code runs. App Store Connect agreements are clean. Key isolating fact: the same Apple ID on the same device completes a first-time Sign in with Apple sign-up in other third-party apps — only ours fails. So the cause appears scoped to our App ID / team on Apple's side, not the device, the Apple ID, 2FA, or our client code. This matches the widespread server-side "Sign Up Not Completed" failure in thread 675756 — same signature: multiple devices/Apple IDs, no console error, the failure delegate surfacing only as "cancel", newly created apps affected, even Apple's own sample app failing — which Apple ultimately resolved server-side (with a recurrence reported June 2025). Note this is the native ASAuthorizationController flow, not the REST/web flow, so the query-parameter percent-encoding fix from thread 122458 does not apply here. Could an Apple engineer check the server-side Sign in with Apple / account-association state for App ID C54N9Q226H (Team 24XS837728)? Happy to provide a screen recording or sysdiagnose.

Hey everyone, I'm hitting an absolute brick wall with Sign in with Apple on an Expo/React Native project distributed via TestFlight. The native API (isAvailableAsync() via expo-apple-authentication) is returning false globally across multiple physical devices, different user Apple IDs, and different network environments. We have completely ruled out a local code crash—the framework initializes, but the local iOS kernel is explicitly returning a hard false on the availability check before even attempting to present the modal sheet. Here is exactly what we have isolated and verified based on DTS documentation: Identifiers & App ID Setup: Team ID: NJ5JQ25956 (Luxor Interactive LLC) iOS Bundle Identifier: com.myoseph.carswipeapp App ID Capabilities: Checked and verified that "Sign in with Apple" is explicitly enabled on the Apple Developer Portal for this explicit bundle ID. Credentials & Provisioning Purge: We suspecting a cached provisioning profile or identifier cross-talk (our Android layout previously used a different package string, though we just unified it to com.myoseph.carswipeapp across the configuration scripts to rule out cryptographic hash collisions). We completely revoked and purged all old Distribution Certificates and App Store Provisioning Profiles from both the build engine cache and the Apple Developer Portal. Regenerated a completely fresh Distribution Certificate (Serial: 7383AE36E5D21E93F3F0B907D3A87DF3) and a brand-new, active Provisioning Profile (ID: L328ZDW2A4). Entitlements Inspection: Inspecting the compiled .ipa container structure shows the explicit com.apple.developer.applesignin entitlement key array is correctly present and injected. Despite having pristine, newly-minted cryptographic certificates tightly bound to a verified App ID, Build 62 on TestFlight still rejects the authentication framework instantly at the OS level. Is there a known propagation lag on Apple's identity database servers for newly updated Team ID capabilities, or is there an internal backend entitlement lock on our corporate Team ID container that isn't reflecting on the developer portal UI? Any insights or a sanity check from DTS would be an absolute lifesaver. Thanks in advance.

When use apple login, It always failed, other app developer by me is success, but the new app failed, the code is the same, it tips Sign up not Completed

I have been working on integrate sign in with apple. I failed for a while. So I download the demo app from this link: https://developer.apple.com/documentation/authenticationservices/implementing-user-authentication-with-sign-in-with-apple And change the bundle id and add it to my paid apple developer account team. Then run it and test it on my all device. It always failed with showing sign up not completed and the log like below: Authorization failed: Error Domain=AKAuthenticationError Code=-7003 "(null)" UserInfo={AKClientBundleID=com.shuaichang.testsignin} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)" authorizationController error: The operation couldn’t be completed. (com.apple.AuthenticationServices.AuthorizationError error 1001.)

I was experiencing a weird sign in error when using apple sign in with my app and wanted to put it here for anyone else who might experience it in the future, and so apple can make this requirement more clear. I was using CloudKit and apple sign in. If you are not using both this probably does not apply to you. Every time I would go to sign in in the iOS simulator I would enter my password, hit "sign in", and everything just froze. The very odd reason for this is if you are using iCloudKit and apple sign in you need to go to specifically the "identifiers" in the "Certificates, Identifiers & Profiles" menu (https://developer.apple.com/account/resources/identifiers/list). And from there you specifically need an App ID Configuration with apple sign in enabled. From there you have to have the same exact bundle identifier in Xcode under project settings(not an upper tab just click your project in the left panel). And that should allow you to both pass validation and have your sign in work. Hope this helps!

Hi Community, We've implemented Sign In with Apple in our application. Our domains are properly registered in the developer console, but we're experiencing inconsistent email functionality with Apple's privacy email service. Some domains work correctly while others show delivery problems, even though all domains have identical configurations. Apple's console displays green verification status for all domains, yet testing reveals that emails to privacy-protected accounts don't arrive as expected. We're using SendGrid as our email service provider, and all domains have valid authentication records (SPF, DKIM, DMARC) in place. Has anyone encountered similar inconsistencies with Apple's privacy email service? Would appreciate any configuration tips or troubleshooting guidance. Thanks.

I am having trouble with one of my apps that will not let me log in via Apple Sign In. I am using Firebase and Firebase UI for the sign in process. I have many other apps with the same exact config that currently work just fine, but this one I have gone as far as completely deleting the targets and rebuilding and it will not return from the login screen I checked the following: Sign in with Apple ID Capability is available in XCode and on the dev certificate on developer.apple.com I have also toggled both of them on and off. I have double checked the config in Firebase to turn on the Apple Login identifier. Again I have toggle it on and off. I have cleaned the project multiple times to no avail. I have logged out and back into my developer account in XCode. It seams like after I put in the correct password to log in, it just never returns to the app, there is no logging. I do get a notified(shaking input box) if I put in an incorrect password, but when I put in the correct one, the login window never dismisses and my app is not notified. I checked the Console and the last message from akd on a working app is: Notifying client (bundle) of credential state change 1. Remote view sent a finish event On the one not working, using the same user and password akd returns: SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 "M2 missing (bad password) I have 100% verified I am putting in the correct user password. I was only notified of this issue because Policy is having the same issue logging in during App Review. Also, if I put in a bad password the input window shakes and when this is happening, the input window is not shaking

Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!

We're integrating Sign in with Apple into our iOS app using both SwiftUI and UIKit. The Apple ID login UI appears correctly on real devices, but after tapping Continue, the system immediately stops and shows code 1001. This issue happens across multiple devices and Apple ID accounts, even with no prior login history. We’ve confirmed the following: Sign in with Apple is enabled in both Developer Portal and Xcode Capabilities Automatic signing and provisioning are set correctly Device is signed into iCloud and system time is synced Performed clean build, app reinstall, and other standard debugging steps We suspect that the sign-in process may not be completing properly due to some kind of account or server-side restriction, and we’d appreciate any insights into this behavior.

Hi, I've been developing an app with a server. I'm hosting the server on an IPv6-ONLY network that's hidden behind the CloudFlare, so it works flawlessly from the clients point of view, but if server needs to access external resources, they need to be accessible over IPv6. As it turns out, appleid.apple.com doesn't support IPv6, and the Sign In with Apple happens with the help of my server. So, I can't sign users in as Apple doesn't support IPv6 traffic on appleid.apple.com. Are there any plans to support IPv6 in the near future, or should I work on the networking setup to enable IPv4 just for the Apple SSO? Or maybe there's a clever workaround I'm missing?

Hey there, im getting Sign up not complete! even with the official template https://developer.apple.com/documentation/authenticationservices/implementing-user-authentication-with-sign-in-with-apple my developer account is recently renewed, which it has expired for a bit i am using automatic managed signing I have a feel something went wrong my apple developer account id, and also this cause me getting invalid client when sign in with app on web app.

I am implementing Apple Sign-In for a multi-platform application, specifically for the web component using the REST API flow. I am encountering an invalid_request Invalid web redirect url error when attempting to use a newly registered redirect URL. Here are the details: Original Test URL: I initially registered a redirect URL, let's call it [Your Original Test Redirect URL, e.g., https://test.yourdomain.com/auth/callback], for testing purposes. This URL worked correctly. New Service URL: I then registered a second redirect URL, [Your New Service Redirect URL, e.g., https://www.yourdomain.com/auth/callback], intended for my production service. This URL was registered approximately 5 days ago (including the weekend). The Problem: The new service URL ([Your New Service Redirect URL]) is still not working and consistently returns the invalid_request Invalid web redirect url error. Puzzling Behavior: Furthermore, I have since deleted the original test URL ([Your Original Test Redirect URL]) from the Service ID configuration in the Apple Developer portal. However, the deleted test URL still appears to function correctly when I use it. This situation is highly confusing: The newly registered URL is not working after 5 days, while the URL I have deleted from the configuration is still operational. The Service ID in question is [Your Service ID, e.g., com.yourdomain.service]. Could you please investigate why the new redirect URL ([Your New Service Redirect URL]) is not becoming active and is returning the invalid_request error, and also explain why the deleted URL ([Your Original Test Redirect URL]) remains functional? Any guidance or assistance you can provide to resolve this issue with the new URL would be greatly appreciated. Thank you for your time and support. Sincerely, I have the exact same problem. The newly registered URL is not working after 5 days, while the URL I have deleted from the configuration is still operational. In addition to the above problem, I also get a response of 'invalid_client' when I newly register a service in configuration. Please check it out as it needs to be resolved quickly.

Since a few days, we are hitting AuthorizationError 1000 / 1001 whenever we try to use Sign in with Apple for a new app. We have added entitlements to the app in both release and debug, and setup the services id. Many other devs are complaining about the same issue lately, and it's possible to reproduce on a fresh app id, see this thread: https://www.reddit.com/r/flutterhelp/comments/1lf6kmq/sign_in_with_apple_signup_not_completed

I am asking about the apple Sign in implementation. ▫️ problems eas local build or test flight, I get a “Could not complete registration” message. When I check the console, I see the following error message. akd SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 UserInfo={NSDescription=<private>, Status=<private>} ▫️ Assumption ・Developed with Expo ・"expo-apple-authentication":"^7.2.4" ・Two apps are developed at the same time, using supabase, firebase, but both have the same error ・On Xcode, on app ids, apple sign in capability is turned on ・Service ids is set to domain, return url ・keys is created ・Internal test of testfligt is set to deliver

We're integrating Sign in with Apple into our iOS app The Apple ID login UI appears correctly on real devices, but after tapping Continue, the system immediately stops and shows code 1001. This issue happens across multiple devices and Apple ID accounts, even with no prior login history. We’ve confirmed the following Sign in with Apple is enabled in both Developer Portal and Xcode Capabilities Automatic signing and provisioning are set correctly Device is signed into iCloud and system time is synced Performed clean build, app reinstall, and other standard debugging steps We suspect that the sign in handshake process may not be completing properly due to some kind of account or server-side restriction, and we’d appreciate any insights into this behavior.

I'm developing a Unity iOS app using the official "Sign In with Apple" Unity plugin (v1.5.0), and I'm encountering persistent errors during authentication. Here’s the full context: App Info: Unity version: 6000.0.32f1 Bundle ID: com.pfcgaming.applesignin Sign In with Apple enabled in the Apple Developer portal Real iOS device, not simulator Error Logs: txt Copy Edit Authorization failed: Error Domain=AKAuthenticationError Code=-7003 "(null)" UserInfo={AKClientBundleID=com.pfcgaming.applesignin} ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1001 "(null)" Description: The operation couldn’t be completed. No credentials available for login. What I’ve Done So Far: Verified "Sign In with Apple" is enabled under the App ID in developer.apple.com. Provisioning profile has been regenerated with correct entitlements. Xcode project has the “Sign In with Apple” capability added. Tested on multiple real iOS devices with iCloud + Keychain enabled. Tried both PerformQuickLogin() and LoginWithAppleId() approaches in the plugin. My Observations: These errors started occurring right after enabling "Sign In with Apple" in the developer portal. Based on some community feedback, there may be a backend propagation delay after enabling SIWA (Sign In With Apple) which might cause these errors. Questions: Is it expected to receive error -7003 or 1001 immediately after enabling SIWA in the Developer Portal? How long does it typically take for entitlement changes to fully propagate? Is there any Apple-recommended workaround to test during this wait time? Any insight or confirmation would be helpful. Thanks in advance!

Apple Sign In - "Sign up not completed" Error in Development Build (React Native / Expo) Problem Summary I'm implementing Apple Sign In in a React Native app using expo-apple-authentication. The Apple sign-in dialog appears as expected, but after tapping "Continue," it displays the message: "Sign up not completed". No credential is returned, and the promise eventually rejects with ERR_REQUEST_CANCELED. App Configuration Platform: React Native (Expo SDK 52) Library: expo-apple-authentication v7.1.3 Target: iOS development build (not Expo Go) Bundle ID: com.example.appname.nativetest (new App ID created for testing) Apple Developer Console Setup (Reviewed Carefully) App ID Explicit App ID (not a wildcard) "Sign In with Apple" capability enabled No associated Services IDs or Sign In with Apple Keys Provisioning Profile Development profile created for the test App ID Profile includes the test device and development certificate Installed successfully and used to sign the app Certificates and Signing Valid Apple Developer Program membership Development certificate installed and selected during build App installs and launches properly on the test device Implementation Attempts Attempt 1: Supabase OAuth Method Initially tried using Supabase’s built-in Apple OAuth provider: Configured with team ID, key ID, and JWT credentials Proper redirect URLs and scheme were in place Resulted in OAuth URL pointing to Supabase instead of Apple, with incomplete client ID Ultimately moved to native implementation for improved control and reliability Attempt 2: Native Apple Sign In (Current Approach) Using expo-apple-authentication with the following code: const credential = await AppleAuthentication.signInAsync({ requestedScopes: [ AppleAuthentication.AppleAuthenticationScope.FULL_NAME, AppleAuthentication.AppleAuthenticationScope.EMAIL, ], }); Relevant app.config.js Section: ios: { bundleIdentifier: 'com.example.appname.nativetest', usesAppleSignIn: true, infoPlist: { NSAppTransportSecurity: { NSAllowsArbitraryLoads: true, NSAllowsLocalNetworking: true, }, }, }, plugins: ['expo-apple-authentication'] Observed Behavior AppleAuthentication.isAvailableAsync() → true Credential state → NOT_FOUND (expected for new user) Apple Sign In dialog appears and allows interaction User taps "Continue" → dialog reports "Sign up not completed" Eventually returns: [Error: The user canceled the authorization attempt], code ERR_REQUEST_CANCELED Confirmed Working Aspects AppleAuthentication API is available and initialized App is signed correctly and launches on the physical test device Apple Sign In dialog appears with correct styling and options Same result observed across both Wi-Fi and cellular networks Clean Setup and Debugging Performed Removed all previous build artifacts Created a new App ID and new provisioning profile Rebuilt the app using expo run:ios --device Validated entitlements and provisioning assignments Removed any Services IDs and Apple Sign In keys used in previous attempts Verified ATS (App Transport Security) policies allow dev-time communication Environment Information Device: iPhone (not simulator) iOS Version: 18.5 Xcode: Latest version Apple ID: Developer account with 2FA enabled Build Method: EAS CLI using expo run:ios --device Open Questions Has anyone experienced the "Sign up not completed" issue with a clean native implementation in Expo? Are there known limitations when testing Apple Sign In in local development builds? Could prior Apple ID authorization attempts impact sign-in behavior during testing? Are there any additional configuration steps, Info.plist changes, or entitlements required beyond those listed above? Thank you in advance for any suggestions or guidance. We’re hoping this is simply a configuration detail that needs to be adjusted.

Hello, I am at wits' end with the Apple Sign-in api. I have tested in stage and it works beautifully, but when i push to production it gives me the error "invalid_client". I'm confident the setup is correct, when I asked Apple for help over the phone, they sent me a few forums with no answers. Has anyone had the same issue? How did you resolve? Could it be because I have two app IDs and two service IDs? (prod + stage) Help!

I am trying to implement Apple Login on the web. The language I am using is PHP. I have created the App ID, Service ID, and Key. In the Service ID, I clicked the Configure button for Sign In With Apple and entered the domain and return URL. However, when I click the login button, I only get an "invalid_client" error screen.