hello, I'm writing to seek clarification on Apple account security, particularly regarding potential risks of compromise, implemented safeguards, and residual risks with corresponding mitigation strategies. We would appreciate your insights on the following specific points: iCloud Keychain Access: Is an Apple ID login strictly required to access iCloud Keychain? We understand that a compromise of iCloud Keychain is unlikely unless a malicious actor successfully takes over the legitimate user's Apple ID. Is this understanding correct? Passkey Theft Methods and Protections: What are the conceivable methods a malicious actor might employ to steal a legitimate user's passkey, and how are these attempts protected against? Impact of Apple ID Compromise on Passkeys: If a malicious actor successfully compromises a legitimate user's Apple ID, is it accurate to assume that the legitimate user's passkeys would then synchronize to the attacker's device, potentially allowing them to log in using their own biometrics? Authorization Flow on Legitimate User's Device: Could you please detail the authorization flow that occurs on the legitimate user's device? We are particularly interested in the types of authentication involved and the conditions under which they are triggered. Detection and Additional Authentication for Unauthorized Login: How are attempts to log in to an Apple ID from an unrecognized device or browser detected, and what additional authentication steps are implemented in such scenarios? Thank you for your time and assistance in addressing these important security questions.

I'm testing app transferring, before, I have migrate user from teamA to teamB, including subA->transferSub->subB process, now I'm transfer the app from teamB to teamC, after the transfer requested, I can't get transfer_id by /usermigrationinfo api, which response 400 invalid request. the question is I can still get transfer sub by the auth/token api(grant_type: authorization_code) with teamB parameters(teamIdB/clientIdB/appSecretB/redirectUrlB/subB)，but the value is same as first time transfer_id which get during teamA to teamB. when use parameters above with target(teamIdC) to request /usermigrationinfo, invalid request was responsed. im sure that all parameters is correct, dose it cause by teamB still in 60-days first transferring(sure already accepted)?

Running the sample "Juice" app, which demos the Sign In With Apple flow, doesn't seem to work with Xcode 12 beta and iOS 14 beta on the simulator (worked fine on the non-beta versions and on a real device with iOS 14 beta). Once the password for the device's Apple ID is entered, the wheel in the password field just keeps spinning. No error messages and nothing handed back over to the app from the ASAuthorizationController. Anyone else seeing this problem ? Are there any workarounds ?

https://developer.apple.com/news/?id=j9zukcr6 starting from Jan 2026 there is change in requirements for account notifications for Sign in with Apple. Does this apply only to developers based in South Korea or all apps which are avai via the korean App Store?

Hello, I have a question regarding the lifecycle of user consent and tokens in "Sign in with Apple." Specifically, I would like to understand the behavior of the auth/revoke API in relation to App Store Connect status changes. Impact of App Status Changes If an app is "Removed from Sale" or "Deleted" from App Store Connect, does Apple automatically revoke all associated user tokens and consent? Or is it still the developer's responsibility to programmatically revoke each user's token via the REST API to ensure the app is removed from the user’s "Apps Using Apple ID" list? API Availability after Removal Once an app is no longer available on the App Store (or its record is deleted in App Store Connect), is the auth/revoke REST API still accessible? I want to ensure that a developer can still perform necessary privacy clean-up tasks (revoking consent) even if the app is not currently distributed. Specific User Impacts of Non-Revocation If we do not call the revocation API, besides the app remaining in the "Sign in with Apple" list, what are the specific consequences for the user? Thank you for your guidance.

Hello. When a user revokes Apple Login authorization, I am expecting a webhook to be delivered to our configured endpoint, but I currently not receiving any at all. So I have some questions: Should the revoke event webhook be delivered in real-time? If it is not real-time, when is the webhook supposed to be sent? If my server fails to respond to the webhook request, does Apple retry the delivery? (Actually I couldn't find how to response in this scenario, but if I can) Thanks in advance.

I want to add the "Sign In with Apple" feature to my iPadOS application. I've already done the following: Include com.apple.developer.applesignin in mobileprovision Include com.apple.developer.applesignin in entitlements However, I'm getting the following errors: `Authorization failed: Error Domain=AKAuthenticationError Code=-7026 "(null)" UserInfo={AKClientBundleID=xxxx} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1000 "(null)" ` What is this problem? How can I solve it? Hoping someone can help, thank you!

Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "com.platform.elderberry.new.signinwithapple", "exp": 1764402438, "iat": 1764316038, "sub": "000851.86193ef81ad247feb673746c19424f28.0747", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "x8sqp2dgvv@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.

Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "xxx", "exp": 1764402438, "iat": 1764316038, "sub": "xxxxxxxx", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "xxx@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.

Hello I am trying to release an application using EXPO ROUTER + EXPO RN WEB. I am trying to implement Apple Login using Firebase. I have already put necessary info in both App Store Connect and Firebas console. Now I am so confused what I have to do next. What are some resource I could use or tips you could possibly give me when making apple login available using firebase. Pleas all helps are welcomed and needed

Hi everyone, I am currently implementing Server-to-Server Notifications for Sign in with Apple. I’ve encountered a discrepancy between the official documentation and the actual payload I received, and I would like to clarify which one is correct. The Situation: I triggered an account deletion event via privacy.apple.com to test the notification flow. When my server received the notification, the type field in the JSON payload was account-deleted (past tense). The Issue: According to the official Apple documentation, the event type is listed as account-delete (present tense). Here is the discrepancy I am observing: Documentation: account-delete Actual Payload: account-deleted My Question: Is the documentation outdated, or is this a known inconsistency? Should I handle both strings (account-delete and account-deleted) in my backend logic to be safe, or is account-deleted the new standard? Any insights or confirmation from those who have implemented this would be greatly appreciated. Thanks!

Is there any documentation about the server to server notification, specifically what sort of data Apple servers send to our server when there is an update to users who used Sign in with Apple?

I’m using Sign in with Apple in my iOS app. When a user chooses “Hide My Email”, I receive the @privaterelay.appleid.com relay address. For marketing reasons, I would prefer to have the user’s real email address instead of the relay email. I want to stay compliant with App Store Review and the Sign in with Apple design/UX requirements. My questions are: Is it allowed to force the user (as part of the registration process) to provide their real email address, even if they chose “Hide My Email” during Sign in with Apple? Are there any specific App Store Review guidelines that forbid: Blocking sign up or access to features if the user keeps the relay email, or Showing a strong prompt like “We can’t log you in unless you share your real email”? What is the recommended, compliant pattern for collecting a “real” email when using Sign in with Apple + Private Relay? I’d appreciate any official clarification or examples of what App Review considers acceptable vs. reject-worthy here.

Hi Apple Developer Community, We have carefully reviewed the documentation on App Transfer and User Migration, but we still have a few unresolved questions regarding Apple Sign-In token behavior and testing strategies. Would appreciate any guidance! Token Behavior for Pre-Transfer App Versions After the app transfer: If a user logs in via an existing pre-transfer version of the app (published under Team A before transfer), will the Apple Sign-In token’s sub (or private email) switch to new value tie to Team B, or unchanged? This is critical for our user migration plan. Preserving sub Across Transfers (Internal Team Transfer) Since our app-transfer is an internal transfer (no change in app ownership outside our organization), is there a way to retain the original sub value（or private email） for users after the transfer? We are concerned that Apple Sign-In errors during the app transfer process may negatively impact user experience. Testing the Transfer Process Safely We’d like to simulate the app transfer and user migration process in a sandbox/test environment before executing it in production. Is there a way to test app transfers without affecting live users? (e.g., a staging mode for transfers) Thank you for your expertise! Any insights would be invaluable.

Question detail Dear Apple Developer Technical Support, We are currently following the official Apple documentation “TN3159: Migrating Sign in with Apple users for an app transfer” to carry out a Sign in with Apple user migration after successfully transferring several apps to a new developer account. Here is a summary of our situation: Under the original Apple developer account, we had five apps using Sign in with Apple, grouped under a shared primary app using App Grouping. Recently, we transferred three of these apps to our new Apple developer account via App Store Connect. After the transfer, these three apps are no longer associated with the original primary App ID. We reconfigured individual Services IDs for each app in the new account and enabled Sign in with Apple for each. More than 24 hours have passed since the app transfer was completed. Now we are attempting to follow the migration process to restore user access via the user.migration flow. Specifically, we are using the following script to request an Apple access token: url = "https://appleid.apple.com/auth/token" headers = {"Content-Type": "application/x-www-form-urlencoded"} data = { "grant_type": "client_credentials", "scope": "user.migration", "client_id": "com.game.friends.ios.xxxx", # New Primary ID in the new account "client_secret": "<JWT signed with new p8 key>" } response = requests.post(url, headers=headers, data=data) However, the API response consistently returns: { "error": "invalid_client" } We have verified that the following configurations are correct: The client_secret is generated using the p8 key from the new account, signed with ES256 and correct key_id, team_id, and client_id. The client_id corresponds to the Services ID created in the new account and properly associated with the migrated app. The scope is set to user.migration. The JWT payload contains correct iss, sub, and aud values as per Apple documentation. The app has been fully transferred and reconfigured more than 24 hours ago. Problem Summary & Request for Support: According to Apple’s official documentation: “After an app is transferred, Apple updates the Sign in with Apple configuration in the background. This can take up to 24 hours. During this time, attempts to authenticate users or validate tokens may fail.” However, we are still consistently receiving invalid_client errors after the 24-hour waiting period. We suspect one of the following issues: The transferred apps may still be partially associated with the original App Grouping or primary App ID. Some Sign in with Apple configuration in Apple’s backend may not have been fully updated after the transfer. Or the Services ID is not yet fully operational for the transferred apps in the new account. We kindly request your assistance to: Verify whether the transferred apps have been completely detached from the original App Grouping and primary App ID. Confirm whether the new Services IDs under the new account are fully functional and eligible for Sign in with Apple with user.migration scope. Help identify any remaining configuration or migration issues that may cause the invalid_client error. If necessary, assist in manually ungrouping or clearing any residual App Grouping relationships affecting the new environment. We have also generated and retained the original transfer_sub identifiers and are fully prepared to complete the sub mapping once the user.migration flow becomes functional. Thank you very much for your time and support!

Goal I want to reply to feedback from customers who signed up using a private.relay account. Problem I am getting this error when sending an email: Reporting-MTA: dns; mailfout.stl.internal X-Postfix-Queue-ID: B87481D0015B X-Postfix-Sender: rfc822; hello@mydomain.com Arrival-Date: Fri, 7 Nov 2025 03:37:29 -0500 (EST) Final-Recipient: rfc822; xxxx@privaterelay.appleid.com Original-Recipient: rfc822;xxxx@privaterelay.appleid.com Action: failed Status: 5.1.1 Remote-MTA: dns; smtp3.privaterelay.appleid.com Diagnostic-Code: smtp; 550 5.1.1 <hello@mydomain.com>: unauthorized sender What have I done? I have configured mydomain.com in the Email Configuration Service inside of apple, as well as the email hello@mydomain.com. Using https://www.mail-tester.com/, I could confirm that the - [SPF] Your server 202.12.124.158 is authorized to use hello@mydomain.com - Your DKIM signature is valid - Your message passed the DMARC test My hunch This app was transferred and the previous owner did not have the email configuration set up. The emails I am writing messages to signed up at that time. Questions: If I rescue the old account and set up the email configuration, would it work? Is there any other tip I could try to apply?

Hello, I’m experiencing an issue with email deliverability when sending messages through Apple’s private email relay service. Our app uses “Sign in with Apple” and sends communication emails to users through relay addresses . Messages are successfully delivered but are consistently being placed in users’ spam or junk folders. Configuration summary: Domain: myapp.example Mail server: OVH SMTP SPF and DKIM: Active and validated Domain and sender registered under “Sign in with Apple for Email Communication” Messages pass SPF and DKIM checks successfully, but emails relayed by Apple’s private service are still being marked as spam. Could anyone confirm if there are additional steps or configurations required to improve deliverability (e.g., DMARC alignment or specific header requirements)? Thank you for your help!

Private relay emails are not being delivered, even though we've followed the guidance here, https://developer.apple.com/help/account/capabilities/configure-private-email-relay-service/ iCloud, gmail etc. get delivered fine but as soon as its a private relay email address they get bounced as unauthorized sender. We've tried a couple of domains but here I'll document test.x.domain.com We have registered domains (test.x.domain.com), also the sender communication emails just to be safe (noreply at test.x.domain.com). Passed SPF Authentication, DKIM Authentication. ESP account shows as all green checks in mailgun. Is there any way to track down what the actual rejection reason is? { "@timestamp": "2025-08-20T14:30:59.801Z", "account": { "id": "6425b45fb2fd1e28f4e0110a" }, "delivery-status": { "attempt-no": 1, "bounce-type": "soft", "certificate-verified": true, "code": 550, "enhanced-code": "5.1.1", "first-delivery-attempt-seconds": 0.014, "message": "5.1.1 <bounce+b53c9e.27949-6qj4xaisn4k=privaterelay.appleid.com@test.x.domain.com>: unauthorized sender", "mx-host": "smtp3.privaterelay.appleid.com", "session-seconds": 1.7229999999999999, "tls": true }, "domain": { "name": "test.x.domain.com" }, "envelope": { "sender": "noreply@test.x.domain.com", "sending-ip": "111.22.101.215", "targets": "6qj4xaisn4k@privaterelay.appleid.com", "transport": "smtp" }, "event": "failed", "flags": { "is-authenticated": true, "is-delayed-bounce": false, "is-routed": false, "is-system-test": false, "is-test-mode": false }, "id": "1gtVBeZYQ0yO1SzipVP99Q", "log-level": "error", "message": { "headers": { "from": "\"Test Mail\" <noreply@test.x.domain.com>", "message-id": "20250820143058.7cac292cf03993f2@test.x.domain.com", "subject": "Test Mail", "to": "6qj4xaisn4k@privaterelay.appleid.com" }, "size": 22854 }, "primary-dkim": "s1._domainkey.test.x.domain.com", "reason": "generic", "recipient": "6qj4xaisn4k@privaterelay.appleid.com", "recipient-domain": "privaterelay.appleid.com", "recipient-provider": "Apple", "severity": "permanent", "storage": { "env": "production", "key": "BAABAgFDX5nmZ7fqxxxxxxZNzEVxPmZ8_YQ", "region": "europe-west1", "url": [ "https://storage-europe-west1.api.mailgun.net/v3/domains/test.x.domain.com/messages/BAABAgFDXxxxxxxxxxxxxxNzEVxPmZ8_YQ" ] }, "user-variables": {} }

Dear Sir or Madam, Thank you for your continued support. My name is Sato from atmos. We are currently working with a vendor to implement Apple Sign In as a login method for our app, but we are encountering some issues and would like to contact you about them. The Apple Sign In functionality itself is almost complete, but during verification, email relay is not permitted by Apple when Apple Sign In is used with a non-public email address, making it impossible to complete email relay verification for users. We have reviewed the settings in “/account/resources/services/configure,” checked your FAQ, and explored all other possible solutions within our scope, but the situation remains unchanged. Would it be possible for your team to confirm the cause of the email relay not being permitted? Thank you for your assistance. atmos Sato Translated with DeepL.com (free version)