Is it possible to use a local wifi router connecting Vision Pro and Mac for developing? I tried from Unity and Xcode. From Unity, the host app wouldn't open without WIFI (internet connection) From Xcode, I can see the Vision Pro paired, but while try to run there's no device listed. Any suggestions? Thanks a lot, /Ruiying

Hello everyone, I've been trying for a few weeks now to convert a sequential series of meshes into a stop-motion animation in USDZ format. In Unreal Engine, I’ve already figured out how to transform the sequential series of individual meshes into a smooth animation using the node system and arrays. Unfortunately, the node system cannot be exported as a usdz animation logic in either Unreal or Blender. Because of this, I have tried several other methods to incorporate the animation logic. Here’s what I’ve tried so far: I attempted to create the animation in Blender with Render-/Viewports and mapping it to keyframes. However, in my experience, Viewports are not supported in the conversion. I tried aligning the vertices of individual objects and merging the frames using the Shrinkwrap modifier in Blender, then setting up a morph animation with keyframes. However, because the individual meshes are too different, this results in artifacts, and manually editing each mesh is too difficult for me to handle. I placed all individual meshes at the same position and animated them sequentially by scaling them from 0 to 100 in keyframes (Frame 1 is visible for 10 frames, then scales down at frame 11, while Frame 2 becomes visible at frame 11, and so on). I also adjusted the keyframes so that the scaling happens in a "constant" manner rather than the default Bezier or linear interpolation. I then converted this animation to .abc, and the result initially looked good. However, some information is lost when converting it with OpenUSD. The animation does not maintain its intended jump-like behavior in USDZ format, and instead, the scaling of individual files is visible in the animation. I tried using a Blender add-on (StepMotion), which allows the animation to be exported as .abc, but it can only be read in Blender or Unreal. Even in the preview, the animation is not displayed correctly, so converting the animation logic does not work either. 
Unfortunately, I have no alternative way to create the animation, as the individual frames have been provided to me as meshes. So far, I haven’t found a way to implement this successfully. I would be very grateful for any tips or ideas, as I am running out of options on how to make this work. Thanks in advance!

We use SceneReconstructionProvider to detect meshes in the surrounding environment and apply an OcclusionMaterial to them. // Assuming `entity` represents one of the detected mesh in the environment entity.components.set(ModelComponent( mesh: mesh, materials: [OcclusionMaterial()] )) While this correctly occludes entities placed in the immersive space, it also occludes system windows. This becomes problematic when a window is dragged into an occluded area (before or after entering the immersive space), preventing interaction with its elements. In some cases, it also makes it impossible to focus on the window’s drag handle, since this might become occluded as well after moving the window nearby. More generally, system windows can be occluded when they come into proximity with a model that has OcclusionMaterial applied. I'm aware of a change introduced in visionOS 2 regarding how occlusions interact with UI elements (as noted in the release notes). I believe this change was intended to ensure windows do not remain visible when opened in another room. However, this also introduces some challenges, as described in the scenario above. Is there a way to prevent system window occlusion while still allowing entities to be occluded by environmental features? Perhaps not using OcclusionMaterial at all? Development environment: Xcode 16.2, macOS 15.2 Run-time configuration: visionOS 2.2 and 2.3

This is no longer highlighting my entity when looking at it: RealityView { content let hoverComponent = HoverEffectComponent(.spotlight( HoverEffectComponent.SpotlightHoverEffectStyle( color: .white, strength: 2.0 ) )) entity.components.set(hoverComponent) The entity is in a window. The same code works in an immersive view. Collision Component and Input type are set in RCP. It's also stopped working on my published app (built under visionOS 2.x) using my visionOS 26 device. If I use a 2.x simulator, it works. Is this a bug or is there something I'm missing? Thanks.

Hi everyone, I’m building a visualization app for VisionPro that uses SharePlay and GroupActivities to explore datasets collaboratively. I’ve successfully implemented the new SharedWorldAnchor feature, and everything works well with nearby, local participants. However, I’m stuck on one point: How can I share a world anchor with remote participants who join via FaceTime as spatial personas? Apple’s demo app (where multiple users move a plane model around) seems to suggest that this is possible. For context, I’m building an immersive app with Metal rendering. Any guidance or examples would be greatly appreciated! Thanks, Jens

When building a multiplayer Tabletop game, the documentation includes how to attach a custom TabletopNetworkSessionCoordinator, which could be used in addition to TabletopGame.MultiplayerDelegate. But so far, we have been unable to create these types of custom coordinators or have a delegate that works. Our current setup with our generic GroupActivity works by sending the session to TabletopGame's coordinateWithSession method (like in the current sample project), but we didn't find a way to access and control, for example, the arbiter, seats, player events, among other features mentioned on https://developer.apple.com/documentation/tabletopkit/tabletopnetworksession. Is correct to expect having access to the participants, messenger, or journal without having to maintain a parallel coordinator?   possibly we are missing something here; any suggestions?

Using Xcode v26 Beta 6 on macOS v26 Beta 25a5349a When pressing on the home button of the visionOS simulator, I am not positioned in the middle of the room like would normally be. This occurred when moving a lot in the space to find an element added to an ImmersiveSpace. How to resolve: restart simulator device. See attached the pictures of the visionOSSimulatorCorrectHomePosition and the visionOSSimulatorMisallignedHomePosition.

The landing page for visionOS 26 mentions The Unified Coordinate Conversion API makes moving views and entities between scenes straightforward — even between views and ARKit accessory anchors. This WWDC session very briefly shows a single example of using this, but with no context. For example, they discuss a way to tell the distance between a Model3D and an entity in a RealityView. But they don't provide any details for how they are referencing the entity (bolts in the slide). The session used the BOT-anist example project that we saw in visionOS 2, but the version on in the Sample Code library has not been updated with these examples. I was able to put together a simple example where we can get the position of a window relative to the world origin. It even updates when the user recenters. struct Lab080: View { @State private var posX: Float = 0 @State private var posY: Float = 0 @State private var posZ: Float = 0 var body: some View { GeometryReader3D { geometry in VStack { Text("Unified Coordinate Conversion") .font(.largeTitle) .padding(24) VStack { Text("X: \(posX)") Text("Y: \(posY)") Text("Z: \(posZ)") } .font(.title) .padding(24) } .onGeometryChange3D(for: Point3D.self) { proxy in try! proxy .coordinateSpace3D() .convert(value: Point3D.zero, to: .worldReference) } action: { old, new in posX = Float(new.x) posY = Float(new.y) posZ = Float(new.z) } } } } This is all that I've been able to figure out so far. What other features are included in this new Unified Coordinate Conversion? Can we use this to get the position of one window relative to another? Can we use this to get the position of a view in a window relative to an entity in a RealityView, for example in a Volume or Immersive Space? What else can Unified Coordinate Conversion do? Are there documentation pages that I'm missing? I'm not sure what to search for. Are there any Sample projects that use these features? Any additional information would be very helpful.

If I long press on an element, the sidebar disappears and then a Done appears on the screen, but nothing else changes, so what are the Environments in Vision Pro's Simulator?

Hi, I'm working with CameraFrameProvider from Enterprise API. Is it always capped at 30fps, or is there something I can switch to get more? I assume it is capped at 30, so let me cram in additional question here :). If I'd get a developer strap and attach an external camera capable of doing >30fps, will I get the full stream, or some other limitation will kick in?

Previously I had developed software using SMI eye trackers, both screen mounted and their mobile glasses, for unique therapeutic and physiology applications. Sadly, after SMI was bought by Apple, their hardware and software have been taken off the market and now it is very difficult to get secondhand-market systems. The Apple Vision Pro integrates the SMI hardware. While I can use ARKit to get gaze position, I do not see a way to access information that was previously made accessible on the SMI hardware, particularly: dwell time and pupil diameter information. I am hopeful (or asking) to see that if a user has a properly set up Optic ID and would opt-in if, either on the present or a future version of visionOS, it might be possible to get access to the data streams for dwell times and pupil diameter. Pupil diameter is particularly important as it is a very good physiological measure of how much stress a person is encountering, which is critical to some of the therapeutic applications that formerly we used SMI hardware. Any ideas, or, if this is not possible, proposing this to the visionOS team would be appreciated!

Hi, would love for your help in that matter. I try to get the position in space of two QR codes to make an alignment to their positions in space. The detection shows that the QR codes position is always 0,0,0 and I don't understand why. Here's my code: import SwiftUI import RealityKit import RealityKitContent struct AnchorView: View { @ObservedObject var qrCoordinator: QRCoordinator @ObservedObject var coordinator: ImmersiveCoordinator let qrName: String @Binding var startQRDetection: Bool @State private var anchor: AnchorEntity? = nil @State private var detectionTask: Task<Void, Never>? = nil var body: some View { RealityView { content in // Add the QR anchor once (must exist before detection starts) if anchor == nil { let imageAnchor = AnchorEntity(.image(group: "QRs", name: qrName)) content.add(imageAnchor) anchor = imageAnchor print("📌 Created anchor for \(qrName)") } } .onChange(of: startQRDetection) { enabled in if enabled { startDetection() } else { stopDetection() } } .onDisappear { stopDetection() } } private func startDetection() { guard detectionTask == nil, let anchor = anchor else { return } detectionTask = Task { var detected = false while !Task.isCancelled && !detected { print("🔎 Checking \(qrName)... isAnchored=\(anchor.isAnchored)") if anchor.isAnchored { // wait a short moment to let transform update try? await Task.sleep(nanoseconds: 100_000_000) let worldPos = anchor.position(relativeTo: nil) if worldPos != .zero { // relative to modelRootEntity if available var posToSave = worldPos if let modelEntity = coordinator.modelRootEntity { posToSave = anchor.position(relativeTo: modelEntity) print("converted to model position") } else { print("⚠️ modelRootEntity not available, using world position") } print("✅ \(qrName) detected at position: world=\(worldPos) saved=\(posToSave)") if qrName == "reanchor1" { qrCoordinator.qr1Position = posToSave let marker = createMarker(color: [0,1,0]) marker.position = .zero // sits directly on QR marker.position = SIMD3<Float>(0, 0.02, 0) anchor.addChild(marker) print("marker1 added") } else if qrName == "reanchor2" { qrCoordinator.qr2Position = posToSave let marker = createMarker(color: [0,0,1]) marker.position = posToSave // sits directly on QR marker.position = SIMD3<Float>(0, 0.02, 0) anchor.addChild(marker) print("marker2 added") } detected = true } else { print("⚠️ \(qrName) anchored but still at origin, retrying...") } } try? await Task.sleep(nanoseconds: 500_000_000) // throttle loop } print("🛑 QR detection loop ended for \(qrName)") detectionTask = nil } } private func stopDetection() { detectionTask?.cancel() detectionTask = nil } private func createMarker(color: SIMD3<Float>) -> ModelEntity { let sphere = MeshResource.generateSphere(radius: 0.05) let material = SimpleMaterial(color: UIColor( red: CGFloat(color.x), green: CGFloat(color.y), blue: CGFloat(color.z), alpha: 1.0 ), isMetallic: false) let marker = ModelEntity(mesh: sphere, materials: [material]) marker.name = "marker" return marker } }

Hello, I'm adding a CollisionComponent to an entity in RealityView. CollisionComponent requires that a Mesh must be provided as a reference for collision detection. However, in order to achieve more accurate detection, I hope that this Mesh resource is a geometric shape of a USDZ model. Is there any way to make it happen? Thank you!

I have been concentrating on developing the visionOS application. While I am currently quite familiar with RealityKit, CompositorServices has also captured my attention. I have not yet acquired knowledge of CompositorServices. Could you please clarify whether it is essential for me to learn CompositorServices? Additionally, I would appreciate it if you could provide insights into the advantages of RealityKit and CompositorServices.

I want to open the control center in Vision Pro’s Xcode simulator. Can I open it? If I can, please tell me how to do it. Thank you.

I’m facing an issue while using CustomHoverEffect. In my view, there is a long title, which causes the title to be truncated. When the user hovers over it, the title should scroll. Although I have already implemented the scrolling effect, I am unsure how to trigger the scroll on hover. How should I approach this?

In the DestinationVideo demo, the onAppear in UpNextView is triggered again when it is closed, but I only want it to be triggered once. How can I achieve this? Alternatively, I would like to capture the button click events in the player menu, as shown in the screenshot below.

I have a visionOS 2 project created on Xcode 16, when I updated to Xcode 26 beta5, I can't build it any more, every time it stuck in process like the picture shows below: Already tried many methods to fix this issue, such as clear build folders, but don't work. MacBook Air M2 / MacOS 26 beta5 / Xcode 26 beta5

Suppose there was an immersiveSpace, and an Entity() being added to the space as child entity of the content. This entity is responsible for playing background music by calling prepareAudio, gaining a controller and play the music. (check the basic code below) When it was playing music, a .plain window and an immersiveSpace are both presented. I believe this immersiveSpace is holding the handle of the controller so as long as immersiveSpace is open, the music won't stop. However if I close the .plain window (by closing system-level close button), the music just stopped. But the immersiveSpace is still open. If right now I check the value of controller.isPlaying, it was still true. But you just cannot hear the music anymore. To reproduce, simply open an visionOS template App project, selecting volume and full immersive, and replace some code inImmersiveView.swift with the code below. Also simply drag any .mp3 file and replace the AudioFileResource's name. And you could reproduce this bug. RealityView { content in // Add the initial RealityKit content if let immersiveContentEntity = try? await Entity(named: "Immersive", in: realityKitContentBundle) { content.add(immersiveContentEntity) // Put skybox here. See example in World project available at // https://developer.apple.com/ if let audioResource = try? await AudioFileResource(named: "anyMP3file.mp3") { let ent = Entity() immersiveContentEntity.addChild(ent) let controller = ent.prepareAudio(audioResource) controller.play() } } } I wonder why this happen? I mean how should I keep the music playing when I close the .plain window? Thanks!

On Xcode 26 and visionOS 26, apple provides observable property for Entity, so we can easily interact with Entity between RealityScene and SwiftUI, but there is a issue: It's fine to observe Entity's position and scale properties in Slider, but can't observe orientation properties in Slider. MacBook Air M2 / Xcode 26 beta6