I'm placing sphere at finger tip and updating its position as hand move. Finger joint tracking functions correctly, but I’ve observed noticeable latency in hand tracking updates whenever a UITextView becomes active. This lag happens intermittently during app usage, lasting about 5–10 seconds, after which the latency disappears and the sphere starts following the finger joints immediately. When I open the immersive space for the first time, the profiler shows a large performance spike upto 328%. After that, it stabilizes and runs smoothly. Note: I don’t observe any lag when CPU usage spikes to 300% (upon immersive view load) yet the lag still occurs even when CPU usage remains below 100%. I’m using the following code for hand tracking: private func processHandTrackingUpdates() async { for await update in handTracking.anchorUpdates { let handAnchor = update.anchor if handAnchor.isTracked { switch handAnchor.chirality { case .left: leftHandAnchor = handAnchor updateHandJoints(for: handAnchor, with: leftHandJointEntities) case .right: rightHandAnchor = handAnchor updateHandJoints(for: handAnchor, with: rightHandJointEntities) } } else { switch handAnchor.chirality { case .left: leftHandAnchor = nil hideAllJoints(in: leftHandJointEntities) case .right: rightHandAnchor = nil hideAllJoints(in: rightHandJointEntities) } } await MainActor.run { handTrackingData.processNewHandAnchors( leftHand: self.leftHandAnchor, rightHand: self.rightHandAnchor ) } } } And here’s the function I’m using to update the joint positions: private func updateHandJoints( for handAnchor: HandAnchor, with jointEntities: [HandSkeleton.JointName: Entity] ) { guard handAnchor.isTracked else { hideAllJoints(in: jointEntities) return } // Check if the little finger tip and intermediate base are both tracked. if let tipJoint = handAnchor.handSkeleton?.joint(.littleFingerTip), let intermediateBaseJoint = handAnchor.handSkeleton?.joint(.littleFingerIntermediateTip), tipJoint.isTracked, intermediateBaseJoint.isTracked, let pinkySphere = jointEntities[.littleFingerTip] { // Convert joint transforms to world space. let tipTransform = handAnchor.originFromAnchorTransform * tipJoint.anchorFromJointTransform let intermediateBaseTransform = handAnchor.originFromAnchorTransform * intermediateBaseJoint.anchorFromJointTransform // Extract positions from the transforms. let tipPosition = SIMD3<Float>(tipTransform.columns.3.x, tipTransform.columns.3.y, tipTransform.columns.3.z) let intermediateBasePosition = SIMD3<Float>(intermediateBaseTransform.columns.3.x, intermediateBaseTransform.columns.3.y, intermediateBaseTransform.columns.3.z) // Calculate the midpoint. let midpointPosition = (tipPosition + intermediateBasePosition) / 2.0 // Position the sphere at the midpoint and make it visible. pinkySphere.isEnabled = true pinkySphere.transform.translation = midpointPosition } else { // If either joint is not tracked, hide the sphere. jointEntities[.littleFingerTip]?.isEnabled = false } // Update the positions of all other hand joint spheres. for (jointName, entity) in jointEntities { if jointName == .littleFingerTip { // Already handled the pinky above. continue } guard let joint = handAnchor.handSkeleton?.joint(jointName), joint.isTracked else { entity.isEnabled = false continue } entity.isEnabled = true let jointTransform = handAnchor.originFromAnchorTransform * joint.anchorFromJointTransform entity.transform.translation = SIMD3<Float>(jointTransform.columns.3.x, jointTransform.columns.3.y, jointTransform.columns.3.z) } } I’ve attached both a profiler trace and a video recording from Vision Pro that clearly demonstrate the issue. Profiler: https://drive.google.com/file/d/1fDWyGj_fgxud2ngkGH_IVmuH_kO-z0XZ Vision Pro Recordings: https://drive.google.com/file/d/17qo3U9ivwYBsbaSm26fjaOokkJApbkz- https://drive.google.com/file/d/1LxTxgudMvWDhOqKVuhc3QaHfY_1x8iA0 Has anyone else experienced this behavior? My thought is that there might be some background calculations happening at the OS level causing this latency. Any guidance would be greatly appreciated. Thanks!

When assigning a ManipulationComponent to an Entity SceneEvents.WillRemoveEntity will be called for that Entity. Expected Behavior: the Entity is not (even if temporarily) removed from the Scene and no SceneEvents will be triggered as a result of assigning a ManipulationComponent. FB20872220

Is there any interest in this forum for those developing for the spatial web and safari. I can't seem to find any posts that are relevant here.

I am considering adding finger pad haptics (Data flow for haptic feedback is directed from the AVP to the fingers, not vice versa). Simple piezos wired to a wrist connection holding the driver/battery. But I'm concerned it will impact the hand tracking. Any guidance regarding gloves and/or the size of any peripherals attached to fingers? Or, if anyone has another (inexpensive) low profile option on the market please LMK. Thanks

Hello, There are odd artifacts (one looks like an image placeholder) appearing when dismissing an immersive space which is displaying an ImagePresentationComponent. Both artifacts look like widgets.. See below our simple code displaying the ImagePresentationComponent and the images of the odd artifacts that appear briefly when dismissing the immersive space. import OSLog import RealityKit import SwiftUI struct ImmersiveImageView: View { let logger = Logger(subsystem: AppConstant.SUBSYSTEM, category: "ImmersiveImageView") @Environment(AppModel.self) private var appModel var body: some View { RealityView { content in if let currentMedia = appModel.currentMedia, var imagePresentationComponent = currentMedia.imagePresentationComponent { let imagePresentationComponentEntity = Entity() switch currentMedia.type { case .iphoneSpatialMovie: logger.info("\(#function) \(#line) spatial3DImmersive display for \(String(describing: currentMedia))") imagePresentationComponent.desiredViewingMode = .spatial3DImmersive case .twoD: logger.info("\(#function) \(#line) spatial3DImmersive display for \(String(describing: currentMedia))") imagePresentationComponent.desiredViewingMode = .spatial3DImmersive case .visionProConvertedSpatialPhoto: logger.info("\(#function) \(#line) spatialStereoImmersive display for \(String(describing: currentMedia))") imagePresentationComponent.desiredViewingMode = .spatialStereoImmersive default : logger.error("\(#function) \(#line) Unsupported media type \(currentMedia.type)") assertionFailure("Unsupported media type \(currentMedia.type)") } imagePresentationComponentEntity.components.set(imagePresentationComponent) imagePresentationComponentEntity.position = AppConstant.Position.spacialImagePosition content.add(imagePresentationComponentEntity) } let toggleViewAttachmentComponent = ViewAttachmentComponent(rootView: ToggleImmersiveSpaceButton()) let toggleViewAttachmentComponentEntity = Entity(components: toggleViewAttachmentComponent) toggleViewAttachmentComponentEntity.position = SIMD3<Float>( AppConstant.Position.spacialImagePosition.x + 1, AppConstant.Position.spacialImagePosition.y, AppConstant.Position.spacialImagePosition.z ) toggleViewAttachmentComponentEntity.scale = AppConstant.Scale.attachments content.add(toggleViewAttachmentComponentEntity) } } }

it looks like one week after accepting as a nearby other AVP device... it expires since we are providing our clients for a timeless app to walk inside archtiecture, it's a shame that not technical staff should connect every week 5 devices to work together is there any roundabout for this issue or straight to the wishlist ? thanks for the support !!

Using a 360 image that I have taken with 72MP with a Insta360 X3 I would like to add those images into my VisionPro and see them surrounding me completely as we expect of a 360 image. I was able to do by performing the described on some tutorial. The problem is the quality. On my 2D window the image looks with great quality. I will still write down the code: struct ImmersiveView: View { @Environment(AppModel.self) var appModel var body: some View { RealityView { content in content.add(createImmersivePicture(imageName: appModel.activeSpace)) } } func createImmersivePicture(imageName: String) -> Entity { let sphereRadius: Float = 1000 let modelEntity = Entity() let texture = try? TextureResource.load(named: imageName, options: .init(semantic: .raw, compression: .none)) var material = UnlitMaterial() material.color = .init(texture: .init(texture!)) modelEntity.components.set( ModelComponent( mesh: .generateSphere( radius: sphereRadius ), materials: [material] ) ) modelEntity.scale = .init(x: -1, y: 1, z: 1) modelEntity.transform.translation += SIMD3<Float>(0.0, 10.0, 0.0) return modelEntity } } Since the quality is a problem. I thought about reducing the radius of the sphere or decreasing the scale. On both cases, nothing changes. I have tried: modelEntity.scale = .init(x: -0.5, y: 0.5, z: 0.5) And also let sphereRadius: Float = 2000, let sphereRadius: Float = 500, but nothing is changed. I also get the warning: IOSurface creation failed: e00002c2 parentID: 00000000 properties: { IOSurfaceAddress = 4651830624; IOSurfaceAllocSize = 35478941; IOSurfaceCacheMode = 0; IOSurfaceMapCacheAttribute = 1; IOSurfaceName = CMPhoto; IOSurfacePixelFormat = 1246774599; } IOSurface creation failed: e00002c2 parentID: 00000000 property: IOSurfaceCacheMode IOSurface creation failed: e00002c2 parentID: 00000000 property: IOSurfacePixelFormat IOSurface creation failed: e00002c2 parentID: 00000000 property: IOSurfaceMapCacheAttribute IOSurface creation failed: e00002c2 parentID: 00000000 property: IOSurfaceAddress IOSurface creation failed: e00002c2 parentID: 00000000 property: IOSurfaceAllocSize IOSurface creation failed: e00002c2 parentID: 00000000 property: IOSurfaceName Is there anything I can do to reduce the radius or just to improve the quality itself?

I noticed in the latest macOS beta 3 that there was this update: A new algorithm significantly improves PhotogrammetrySession reconstruction quality of low-texture objects not captured with the ObjectCaptureSession front end. It will be downloaded and cached once in the background when the PhotogrammetrySession is used at runtime. If network isn’t available at that time, the old low quality model will be used until the new one can be downloaded. There is no code change needed to get this improved model. (145220451) I am not noticing any difference to before with the reconstructions I tested so I am assuming it's reverting to the old model but in the logs there is no way to see if it succeeds or fails to download that new model. do you have any more information on what was improved here with some examples and what we should be looking for? also how can confirm the download of that new model has not failed?

Hello all, I saw this interesting VisionOS app: https://apps.apple.com/us/app/splitscreen-multi-display/id6478007837 I was wondering if there was any documentation on the Swift APIs that were used to create this app.

I've been experimenting with the Muse pen and understand that it can be accessed by my app through a SpatialTrackingSession, but is there any current or planned support for devices like this as for general UI input like game controllers are? For example, using the button as a tap analogue for SwiftUI views.

Hello, I'm developing a visionOS application for Apple Vision Pro that aims to scan unknown physical objects, capture their 3D data (such as meshes or point clouds), and export them as 3D models. Ideally, I'd also like to visualize these reconstructions in real-time within the headset. This functionality is similar to what's available in Reality Composer on iPad and iPhone, but I'm seeking to implement it natively on Vision Pro. I've reviewed the visionOS documentation but haven't found clear guidance on accessing LiDAR depth data or performing scene reconstruction. Specifically, I'm interested in: 1.Accessing LiDAR or depth data from Vision Pro's sensors. 2.Utilizing ARKit's scene reconstruction capabilities on visionOS. 3.Exporting captured 3D data as models (e.g., USDZ or OBJ formats). Are there APIs or frameworks in visionOS that support these features?

I work on a game where I use timeline animations in Reality Composer Pro. The game runs in an immersive space, but can be paused where I then move the whole level root entity from the immersive space to another RealityView in a Window Group. When the player continues I do it exactly the other way around to move the level root from the window group back to my immersive space RealityView. And it seems like all animations get automatically stopped and restarted when the scene gets changed. The problem is, it does not resume where it stopped before, it completely starts again from where it stopped and therefore, has for example a wrong y offset as visible in the picture. For example in the picture, the yellow sphere loops the following animation: 0 to 100 100 to -100 -100 to 0 If I now pause the game (and basically switch scenes), the previous animation gets stopped and restarted at position y = 100. So now it loops: 100 to 200 200 to 0 0 to 100 I already tried all kind of setups - like: Setting the animations relative to root, parent, local Using behaviors (on Added to Scene, on Notification) And finally even by accessing the availableAnimations directly and saving the playback controller of the animation There I saw, if I manually trigger the following code before switching the scene, everything works as expected: Button("Reset") { animationPlaybackController.time = 0 animationPlaybackController.pause() animationPlaybackController.stop(blendOutDuration: 0.00001) } But if I use time = 0 with .stop() directly, the time = 0 seems to be ignored and I get the same behavior as before that it stops in a wrong y offset, hence my assumption that animations get stopped and invalidated once they change the scene. I tried to call the code manually on ImmersiveSpace.onDisappear, WindowGroup.onAppear and different kind of SceneEvents subscriptions, but unfortunately nothing worked. So am I doing something wrong in general or is there a way to fix this?

I noticed that when I drag the menu window in an Immersive View, the entities behind it becomes semi-transparent, and the boundary between virtual and real-world objects is very pronounced. May I ask how does VisionOS implement this effect? Is there any API or technique I can use in my own code to enable the same semi-transparent overlay - even when I am not dragging the menu window?

Currently I am using mixed style immersive view to place both my WindowView(plain style) and ImmersiveView content together. The issue is that the rendering depth testing may always let the virtual content block my normal WindowView. Is it possible to manually set windowedVIew always displays in the front of my virtual view in mixed style immersion? (I know modelSortGroup but it doesn't quite fits here) Or if I can dynamically change the .progressive value when the immersive space is open (set the value to zero means .mixed itself right?)

After updating to visionOS 26.2 Beta 2 (and Beta 3), I'm unable to establish a spatial connection to Vision Pro. This was working fine before the update. To test, I've created a fresh spatialApp project from the Xcode template with zero modifications, but I'm hitting the same issue - the Vision Pro is discovered but won't connect. Am I forgetting to update the config somewhere? Any ideas what might be causing this and how to fix it? Thanks! Warning: -[NSWindow makeKeyWindow] called on <NSWindow: 0xa1f811900> windowNumber=1b9 which returned NO from -[NSWindow canBecomeKeyWindow]. ((processConfiguration != nil && configuration != nil) || (processConfiguration == nil && configuration == nil)) - /AppleInternal/Library/BuildRoots/4~CBS0ugAIF7BrQZjLe6r0lhPXO4GJmNDTovxYoV0/Library/Caches/com.apple.xbs/Sources/ExtensionKit/ExtensionKit/Source/HostViewController/Internal/EXHostSessionDriver.m:80: `processConfiguration` and `configuration` must be both non-nil or both nil Unable to obtain a task name port right for pid 415: (os/kern) failure (0x5) CCContextDeviceGroup.mm(291):+[CCContextDeviceGroup checkBinaryArchivesForDevice:withBundle:]: Failed to find any binary shader archive

Is there any size guidance for the new WidgetKit integration on visionOS? The Widget HIG provides dimensions for all the widget size classes on iOS, iPadOS and watchOS, but has not been updated for visionOS. https://developer.apple.com/design/human-interface-guidelines/widgets My potential widget use case is image based, so I'm looking to better understand the optimal size, resolution etc I would need, particularly for the new visionOS specific extra large widget size.

Spatial photo in RealityView has a default corner radius. I made a parallel effect with spatial photos in ScrollView(like Spatial Gallery), but the corner radius disappeared on left and right spatial photos. I've tried .clipShape and .mask modifiers, but they did't work. How to clip or mask spatial photo with corner radius effect?

当我进入混合空间时，出现一个模型，但模型后面有一个 windowGroup，无法完全查看。如果我想点击进入 mix 空间，我需要使用代码将 windowGroup 移动到另一个位置，而不是手动移动 ![]（“https://developer.apple.com/forums/content/attachment/0471ead0-4c74-43a7-9ecc-12e67e81cec6” “title=WechatIMG31.jpg;宽度=915;高度=777”）

I created a new Spatial Rendering App from the template in Xcode 26.0.1. When I run the app, click 'Show Immersive Space' and select my Vision Pro from the pop-up dialog, the content in the dialog flickers (which seems to indicate something crashed) and nothing appears on my Vision Pro. I'm running the released macOS 26.0 (25A354) and visionOS 26.0 (23M336). Filed as FB20397093.

I am developing a Unity application for the Apple Vision Pro using PolySpatial and RealityKit integration. The goal is to create a graspable object (for example, a handheld cube) that includes a secondary camera. When the user grabs and moves the object, the secondary camera should render its view to a RenderTexture, which is displayed on a quad attached to the object, simulating a live camera screen. In the Unity Editor, this setup works correctly. The RenderTexture updates in real time, and the quad displays the camera’s view as expected. However, when building and running the application on the Vision Pro, the quad only displays the clear background color of the secondary camera. No scene content appears. The graspable interaction itself works fine: the object can be grabbed and moved as intended. Steps I have taken: Created a new layer (CameraFeed) and assigned the relevant objects to it. Set the secondary camera’s culling mask to render only the CameraFeed layer. Assigned the RenderTexture as the camera’s target texture. Applied the RenderTexture to an Unlit/Texture material on a quad. Confirmed the camera is active and correctly positioned relative to the object. From my research, it appears that once objects are managed by RealityKit through PolySpatial (for example, made graspable), they are no longer rendered through Unity's normal camera pipeline. Only the main XR camera (managed by RealityKit) seems able to see these objects. Secondary Unity cameras cannot render RealityKit-synced content to a RenderTexture. If this is correct, it seems there is currently no way to implement a true live secondary camera feed showing graspable objects on Vision Pro using Unity PolySpatial. My questions are: Is there any official way to enable multiple camera rendering of RealityKit-managed objects through PolySpatial? Are there known workarounds to simulate a live camera feed that still allows objects to be grabbed? Has anyone found alternative design patterns or methods for this kind of interaction? Environment: Unity 6.0 , PolySpatial 2.2.4, Apple Vision OS XR 2.2.4 Any insight or suggestions would be greatly appreciated. Thank you.