I am looking for a material that functions in the same way that Occlusion Material does, except that it only partially occludes whatever is behind it. One way that I have thought of doing this was to change the opacity of the entity that was covered in Occlusion Material, however this did not change anything. Please let me know if this is possible.

Hi, I'm playing now with hand tracking. I want to get position of hand inside a system update function. I was not sure if transform I'm getting from hand attached AnchorEntity (with trackingMode: .predicted) would give same results as handAnchors(at:) from hand tracking provider, so I started to read them both and compare. For handAnchors i tried using context.scene.timebase.sourceTimebase!.sourceClock!.time.seconds and CACurrentMediaTime() as timestamp source. They seem to use exactly same clock, so that doesn't matter, but: for some reason update handler is always called twice with same context.deltaTime, but first time the query finds 0 entities, second time it finds them all. The query is the standard EntityQuery(where: .has(MyComponent.self)) and in update (matching: Self.query, updatingSystemWhen: .rendering). Here's part of logs: System update called, entity count: 0, dt: 0.01000458374619484, absTime: 4654.222593541 System update called, entity count: 11, dt: 0.01000458374619484, absTime: 4654.22262525 System update called, entity count: 0, dt: 0.009999999776482582, absTime: 4654.249390875 System update called, entity count: 11, dt: 0.009999999776482582, absTime: 4654.249425 accounting for the double update calling I started to calculate time delta of absolute time between calls and they're most of the time much bigger, or much smaller than advertised by system's context.deltaTime, only sometimes they kind of match, for example: system: (dt: 0.01000458374619484) scene : (dt: 0.021419291667371) (absTime: 4654.222628125001) and the very next call system: (dt: 0.010009 166784584522) scene : (dt: 0.0013097083328830195) (absTime: 4654.223937833334) but sometimes system: (dt: 0.009999999776482582) scene : (dt: 0.009 112249999816413) (absTime: 4654.351299 166668) Shouldn't those be more or less equal, or am I missing something? In the end it seems that getting hand position from AnchorEntity and with handAnchors(at:) gives kind of same results, but at different time points, so I'd love to understand what's the correct way to use them and why time flows differently :). --Edit-- P.S. Had to put spaces everywhere in logs between "9" and "1", otherwise post was blocked due to "sensitive content" :D

Using the example code posted here: https://developer.apple.com/documentation/visionOS/tracking-images-in-3d-space I can register multiple ReferenceImage s with a ImageTrackingProvider, but only one updates at a time - to have realtime updating, I can only have one ImageAnchor in my field of view at a time. Is it possible to track multiple imageAnchors at the same time in the same field of view? As in having several ImageAnchor's tracked and entities updated to the transforms of the anchor in the same frame/moment from the Apple Vision Pro?

Hi 26 beta guys, I have apps using ARKit. In iPadOS 26 beta, ARKit stops working after switching to other apps. how to: Enable WindowMode in iPadOS 26 Launch my app and start ARSession Switch to another app (preference app, etc.) Switch back to my app AR stops updating camerafeed. I debug printed ARSessionDelegate, and found that after sessionWasInterrupted was called, sessionInterruptionEnded was never called. sessionInterruptionEnded is called if WindowMode disabled. Is this just a bug for 26 beta? I suspect there is similar problem with non-AR camera. Any idea?

Hello, I am trying to develop an app that broadcasts what the user sees via Apple Vision Pro. I am a graduate student studying at the university. And I have two problems, If I want to use passthrough in screen capture (in VisionOS), do I have to join Apple Developer Enterprise Program to get Enterprise API? and Can I buy Apple Developer Enterprise Program (Enterprise API) with my university account? Have any of you been able to do this? Thank you

I have read in the apple documentation and on forums that in order to access the camera and capture images on VisionPro, both an Entitlement and an Enterprise.license are required. I already have the Entitlement, but I don’t yet have the Enterprise.license. I would like to ask: is the Enterprise.license strictly required to gain camera access for capturing images? How can I obtain this file, and does it require an Enterprise account? Currently, my developer account is a regular Developer 99$, not an Enterprise account.

Hi everyone, We’re developing a Unity project for Apple Vision Pro that connects PSVR2 Sense controllers for advanced interaction and input. We’ve encountered a major limitation: when the controller is not held close to the designated hand (e.g., resting on a table or held by the non designated hand), the Sense controller enters a low-power or reduced-update mode. This results in noticeably reduced tracking update frequency and responsiveness until the controller is held again. For certain use cases, this behavior is undesirable. In our case, it prevents continuous real-time tracking of the controller even when it’s stationary or being tracked externally. Request: Please consider exposing an API flag or developer option in ARKit to disable and optionally delay the low-power mode when the app requires full-rate updates regardless of proximity or hand pose detection.

0 I’m using ARKit + SceneKit (Swift) with ARWorldTrackingConfiguration and detectionImages to place a 3D object (USDZ via SCNScene(named:)) when a reference image is detected. While the image is tracked, the object stays correctly aligned. Goal: When the tracked image is no longer visible, I want the placed node to remain visible and fixed at its last known pose (no drifting) as I move the camera. What works so far: Detect image → add node → track updates When the image disappears → keep showing the node at its last pose Problem: After the image is no longer tracked, the node drifts as I move the device/camera. It looks like it’s still influenced by the (now unreliable) image anchor or accumulating small world-tracking errors. Question: What’s the correct way in ARKit to “freeze” the node at its last known world transform once ARImageAnchor stops tracking, so it doesn’t drift?

i'd like to have a little bit control over the transparency of the videomaterial. is there any way to prepare a shadergraph unlit shader and use it with the videomaterial.

Hardware Specifications Regarding the LiDAR scanner in the iPhone 13/14/15/16/17 Pro series, could you please provide the following technical details for academic verification: Point Cloud Density / Resolution: The effective resolution of the depth map. Sampling Frequency: The sensor's refresh rate. Accuracy Metrics: Official tolerance levels regarding depth accuracy relative to distance (specifically within 0.5m – 2m range). Data Acquisition Methodology For a scientific thesis requiring high data integrity: Does Apple recommend a custom ARKit implementation over third-party applications (e.g., Polycam) to access raw depth data? I need to confirm if third-party apps typically apply smoothing or post-processing that would obscure the sensor's native performance, which must be avoided for my error analysis.

I have already add liscene and entitlement for Passthrough in screen capture, but still get black background instaed of real world. Do you have any idea ? I've been stuck with this question for a long time 😢

We are working on a world scale AR app that leverages the device location and heading to place objects in the streets, so that they are correctly and stably anchored to certain locations. Since the geo-tracking imagery is only available in certain cities and areas, we are trying to figure out how to fallback when geo-tracking is not available as the device move away, to still retain good AR camera accuracy. We might need to come up with some algorithm using the device GPS, to line up the ARCamera with our objects. Question: Does geo-tracking always provide greater than or equal to the accuracy of world tracking, for a GPS outdoor AR experience? If so, we can simply use the ARGeoTrackingConfiguration for the entire time, and rely on the ARView keeping itself aligned. Otherwise, we need to switch between it and ARWorldTrackingConfiguration when geo-tracking is not available and/or its accuracy is low, then roll our own algorithm to keep the camera aligned. Thanks.

I'm using ARKitSession and PlaneDetectionProvider to detect planes. I have a basics process to create an entity for each detected plane. Each one will get a random color for the material. Each plane is sized based on the bounds of the anchor provided by ARKit. let mesh = MeshResource.generatePlane( width: anchor.geometry.extent.width, depth: anchor.geometry.extent.height ) Then I'm using this to position each entity. entity.transform = Transform(matrix: anchor.originFromAnchorTransform) This seems to be the right method, but many (not all) planes are not where they should be. The sizes look OK, but the X and Y positions off. Take this large green plane on the wall. It should span the entire wall, but it is offset along the X position so that it is pushed to the left from where the center of the anchor is. When I visualize surfaces using the Xcode debugging tools, that tool reports the planes where I'd expect them to be. Can you see what I'm getting wrong here? Full code below struct Example068: View { @State var session = ARKitSession() @State private var planeAnchors: [UUID: Entity] = [:] @State private var planeColors: [UUID: Color] = [:] var body: some View { RealityView { content in } update: { content in for (_, entity) in planeAnchors { if !content.entities.contains(entity) { content.add(entity) } } } .task { try! await setupAndRunPlaneDetection() } } func setupAndRunPlaneDetection() async throws { let planeData = PlaneDetectionProvider(alignments: [.horizontal, .vertical, .slanted]) if PlaneDetectionProvider.isSupported { do { try await session.run([planeData]) for await update in planeData.anchorUpdates { switch update.event { case .added, .updated: let anchor = update.anchor if planeColors[anchor.id] == nil { planeColors[anchor.id] = generatePastelColor() } let planeEntity = createPlaneEntity(for: anchor, color: planeColors[anchor.id]!) planeAnchors[anchor.id] = planeEntity case .removed: let anchor = update.anchor planeAnchors.removeValue(forKey: anchor.id) planeColors.removeValue(forKey: anchor.id) } } } catch { print("ARKit session error \(error)") } } } private func generatePastelColor() -> Color { let hue = Double.random(in: 0...1) let saturation = Double.random(in: 0.2...0.4) let brightness = Double.random(in: 0.8...1.0) return Color(hue: hue, saturation: saturation, brightness: brightness) } private func createPlaneEntity(for anchor: PlaneAnchor, color: Color) -> Entity { let mesh = MeshResource.generatePlane( width: anchor.geometry.extent.width, depth: anchor.geometry.extent.height ) var material = PhysicallyBasedMaterial() material.baseColor.tint = UIColor(color) let entity = ModelEntity(mesh: mesh, materials: [material]) entity.transform = Transform(matrix: anchor.originFromAnchorTransform) return entity } }

In several visionOS apps, we readjust our scenes to the user's eye level (their heads). But, we have encountered issues whereby the WorldTrackingProvider returns bad/incorrect positions for the first x number of frames. See below code which you can copy paste in any Immersive Space. Relaunch the space and observe the numberOfBadWorldInfos value is inconsistent. a. what is the most reliable way to get the devices's position? b. is this indeed a bug? c. are we using worldInfo improperly? d. as a workaround, in our apps we set to 10 the number of frames to let pass before using worldInfo, should we set our threshold differently? import ARKit import Combine import OSLog import SwiftUI import RealityKit import RealityKitContent let SUBSYSTEM = Bundle.main.bundleIdentifier! struct ImmersiveView: View { let logger = Logger(subsystem: SUBSYSTEM, category: "ImmersiveView") let session = ARKitSession() let worldInfo = WorldTrackingProvider() @State var sceneUpdateSubscription: EventSubscription? = nil @State var deviceTransform: simd_float4x4? = nil @State var numberOfBadWorldInfos = 0 @State var isBadWorldInfoLoged = false var body: some View { RealityView { content in try? await session.run([worldInfo]) sceneUpdateSubscription = content.subscribe(to: SceneEvents.Update.self) { event in guard let pose = worldInfo.queryDeviceAnchor(atTimestamp: CACurrentMediaTime()) else { return } // `worldInfo` does not return correct values for the first few frames (exact number of frames is unknown) // - known SO: https://stackoverflow.com/questions/78396187/how-to-determine-the-first-reliable-position-of-the-apple-vision-pro-device deviceTransform = pose.originFromAnchorTransform if deviceTransform!.columns.3.y < 1.6 { numberOfBadWorldInfos += 1 logger.warning("\(#function) \(#line) deviceTransform.columns.3.y \(deviceTransform!.columns.3.y), numberOfBadWorldInfos \(numberOfBadWorldInfos)") } else { if !isBadWorldInfoLoged { logger.info("\(#function) \(#line) deviceTransform.columns.3.y \(deviceTransform!.columns.3.y), numberOfBadWorldInfos \(numberOfBadWorldInfos)") } isBadWorldInfoLoged = true // stop logging. } } } } }

I am trying to create an object in immersive space that is partially transparent (~50% opacity). I have implemented this in a few different ways including creating a model entity and setting its opacity component to 0.5, and creating a custom material with blending set to a transparent opacity of 0.5. These both work partially, as they behaved as intended for many cases, but seemingly randomly would act like occlusion material and block any other immersive content behind them, showing the real world instead. Some notes: I am using RealityKit to render the semi-transparent object and an opaque object that is behind the semi-transparent object. I am using VisionOS 2.1, and am updating the location of the semi-transparent object often. Both objects are ModelEntities. I would appreciate any guidance on how to implement this. Please let me know if there are any other questions.

My ARViewContainer code is not working. I don't know how to debug the issue and I don't know or see where my results is going to. I need help to resolve this issue. please help debug. See code below:

Hi all, I'm running into an issue with an app that previously worked fine on device using visionOS 2.0. After updating to visionOS 26, the same code runs fine in the simulator but crashes on the device with the following error: -[MTLDebugComputeCommandEncoder _validateThreadsPerThreadgroup:]:1330: failed assertion `(threadsPerThreadgroup.width(32) * threadsPerThreadgroup.height(32) * threadsPerThreadgroup.depth(1))(1024) must be <= 832. (kernel threadgroup size limit)` Is there any documented way to check or increase the allowed threadsPerThreadgroup size on Apple Vision Pro? Or any recommended workaround for this regression? Thanks in advance!

Hello RemoteDeviceIdentifier returns nil and therefore it crashes the HoverEffect sample project. I have vision26 beta 2 on both devices what the correct method of running this code sample ?

Hi, I called it "perspective problem", but I'm not quite sure what it is. I have a tag that I track with builtin camera. I calculate its pose, then use extrinsics and device anchor to calculate where to place entity with model. When I place an entity that overlaps with physical object and start to look at it from different angles, the virtual object begins to move. Initially I thought that it's something wrong with calculations, or some image distortion closer to camera edges is affecting tag detection. To check, I calculated the position only once and displayed entity there, the physical tracked object is not moving. Now, when I move my head, so the object is more to the left, or right in my field of view, the virtual object becomes misaligned to the left, or right. It feels like a parallax effect, but distance from me to entity and to physical object are exactly the same. Is that expected, because of some passthrough correction magic? And if so, can I somehow correct it back, so the entity always overlaps with object? I'm currently on v26 beta 5. I also don't quite understand the camera extrinsics, because it seems that I need to flip it around X by 180 degrees to make it work in deviceAnchor * extrinsics.inverse * tag (shouldn't it be in same coordinates as all other RealityKit things?).

Is there any way to render a RealityView to an Image/UIImage like we used to be able to do using SCNView.snapshot() ? ImageRenderer doesn't work because it renders a SwiftUI view hierarchy, and I need the currently presented RealityView with camera background and 3D scene content the way the user sees it I tried UIHostingController and UIGraphicsImageRenderer like extension View { func snapshot() -> UIImage { let controller = UIHostingController(rootView: self) let view = controller.view let targetSize = controller.view.intrinsicContentSize view?.bounds = CGRect(origin: .zero, size: targetSize) view?.backgroundColor = .clear let renderer = UIGraphicsImageRenderer(size: targetSize) return renderer.image { _ in view?.drawHierarchy(in: view!.bounds, afterScreenUpdates: true) } } } but that leads to the app freezing and sending an infinite loop of [CAMetalLayer nextDrawable] returning nil because allocation failed. Same thing happens when I try return renderer.image { ctx in view.layer.render(in: ctx.cgContext) } Now that SceneKit is deprecated, I didn't want to start a new app using deprecated APIs.