I am reporting what appears to be a serious integrity flaw in Safari under iPadOS 26.3 (and lower) that materially undermines the reliability of Screen Time parental controls. This is not merely a UX inconsistency but a functional contradiction within a system explicitly marketed and positioned as secure parental control infrastructure. Device / Environment Device: iPad Air M3 13" (2025) OS: iPadOS 26.3 Safari (system version) Screen Time enabled with active restrictions Child account (10 years old) Background We deliberately chose an Apple device for school use based on the expectation that Apple’s system-level parental control mechanisms — especially Screen Time — are robust, tamper-resistant, and technically consistent. Screen Time is configured with: App limits Downtime Parental controls enabled with limited web content restrictions (school requirements prevent strict blocking) Safari enabled (mandatory for educational use) further parental control restrictions Because aggressive website blocking would interfere with legitimate school activities, monitoring Safari browsing history is a central supervisory mechanism. When Screen Time is active: Clearing the entire browsing history via Safari is correctly blocked. Clearing history via system settings is correctly blocked. The system explicitly communicates that deletion is not permitted due to Screen Time restrictions. This behavior establishes a clear user expectation: Browsing history is protected against manipulation. The Issue Despite the above safeguards, individual browsing history entries can be deleted easily and silently through the address bar suggestion interface. This creates a structural contradiction: Full deletion is blocked. Selective deletion — which is arguably more problematic — remains possible. Steps to Reproduce Enable Screen Time with restrictions that prevent deletion of browsing history (for example on a student device with a child account). Open Safari and visit any website. Confirm it appears in Safari history. Tap the Safari address bar. Type part of the URL or page title. Safari suggests the previously visited page below the address bar. Swipe left on that suggestion. A red “Delete from History” button appears. Tap it. Actual Result The entry disappears immediately: No Screen Time PIN required No authentication request No warning No restriction triggered No parental notification No audit trace visible Deletion occurs silently and irreversibly. Expected Result When Screen Time is configured to prevent browsing history deletion: Individual entries must not be deletable Deletion must require Screen Time authentication Anything else defeats the protective purpose of the restriction. Real-World Impact In practical use, this allows minors to selectively sanitize browsing history while preserving a seemingly intact record. In our case, this method is widely known among classmates and routinely used to conceal visits to gaming or social media platforms during school hours. The technical barrier to exploitation is negligible. This results in: A false sense of security for parents A discrepancy between advertised functionality and actual system behavior A material weakening of parental control integrity When a system explicitly blocks full history deletion but permits silent selective deletion, the protection mechanism becomes functionally inconsistent and unreliable. Given that Screen Time is publicly positioned as a dependable parental control framework, this issue raises concerns not only about implementation quality but also about user trust and reasonable reliance on advertised safeguards. Request Please classify this as a parental control integrity and trust issue. Specifically: Disable individual history deletion while Screen Time restrictions are active OR Require Screen Time passcode authentication for deleting single entries Screen Time is presented as a secure supervisory environment for minors. In its current implementation under iPadOS 26.3 and before, that expectation is technically not met. This issue warrants prioritization.

I created a form field using: On Safari and Chrome desktop, it behaves as expected. Safari shows the current date in grey by default, and Chrome displays a format hint like dd.mm.yyyy, which is perfectly fine. On iOS, however, the field appears completely blank. I understand that the placeholder attribute is not part of the iOS date input behavior, which is technically fine. Still, it would be helpful if developers had the option to define a default display value. In the past, browsers prefilled date inputs, but many developers objected because they needed the field to be empty by default. I have searched extensively and tried several AI tools, and everywhere it says that this cannot be changed. Am I missing something, or is there any way to display a placeholder, the current date, or some kind of visual hint in iOS Safari? Right now, the empty field creates poor UX because users may overlook it. Since the field is required, this can easily lead to validation errors and additional friction. As a workaround, I used a CSS hack with input[type="date"]::before and a content attribute. I also added JavaScript to toggle a pseudo-placeholder value specifically for iOS. Is there a cleaner solution that avoids this workaround? Thanks in advance for your guidance.

We are currently supporting an Apple Pay-enabled card program as an issuer/issuer processor and have successfully completed In-App Push Provisioning integration within our iOS application. The in-app flow is fully operational, including issuer-side cryptographic exchange and Mastercard MDES network tokenization. We are now looking to extend this integration to support Apple Pay Web Push Provisioning, allowing cardholders to add eligible cards to Apple Wallet directly from our web application. We would appreciate guidance on: -The process for enrolling in Apple Business Register (if required) -Enabling Web Push Provisioning for an issuer profile Required entitlements or provisioning certificates Any additional onboarding steps specific to issuer-level Web provisioning We understand that Web Push Provisioning requires issuer-level enablement beyond standard Apple Pay on the Web, and we would like clarification on the correct path to activate this capability. Thank you in advance for your guidance.

Description On macOS, system-level autocomplete suggestions appear in <textarea> elements even when all relevant HTML attributes intended to disable autocomplete and text assistance are explicitly set. Is this behavior intentional, or is there any supported way for developers to control or disable this functionality? Steps to Reproduce Send yourself an email using the native macOS Mail app containing a verification code (for example). Focus an HTML <textarea> element in any web application. Focus the textarea. Expected Result The autocomplete popup should be controllable from the code, and it should be possible to fully disable it using standard HTML attributes or browser APIs. Actual Result The system autocomplete popup appears in all cases and cannot be controlled or disabled by the code, even when all known attributes (autocomplete="off", autocorrect="off", autocapitalize="off", spellcheck="false") are set.

Hello there, Credit card autofill works in Safari when accessing the checkout on my website, but does NOT work when the same page is loaded in a WKWebView within the my iOS mobile app. is there any way I can make it work?

We are using WKWebView to load content from a local server. On specific iPhones running the latest iOS, the web view gets stuck on the loading state. We confirmed this is a system-wide networking issue because the same URL also fails to load in mobile Safari. Workaround: The only way to restore connectivity to the local host is to reboot the iPhone. this happens on last iOs releases on some iPhones with ios 26.2 and 26.3

Summary: We are facing a serious issue on iPhone where multiple passkey authentication problems occur when accessing passkey-enabled login pages via shortcuts placed on the iPhone Home Screen. These issues may also occur when opening the same pages directly in a standard browser window. However, launching the login pages from a Home Screen shortcut appears to increase the likelihood of encountering these issues. Affected Services (examples, not exhaustive): Amazon GitHub Adobe Observed Issues: Issue 1: A passkey authentication dialog/popup shows two times without any user operation: What happens due to this issue: Login does not complete after the first passkey authentication. A second passkey authentication UI automatically appears. Completing or canceling the second authentication allows the login to proceed. Issue 2: Login remains stuck until the user manually invokes passkey again What happens due to this issue: The login page does not advance after the first authentication. The user must tap the ID/username field again to manually trigger the passkey UI. Completing the second authentication enables login. Issue 3: Automatic second authentication occurs, but login still fails What happens due to this issue: A second automatic authentication UI appears. Login still does not complete. Tapping the ID field no longer opens the passkey UI; instead, the password auto-fill panel appears. Passkey login becomes impossible. Observed reproduction steps (not guaranteed but most consistently observed): On iPhone, navigate to a passkey-enabled login page (e.g., Amazon, GitHub, Adobe) using a browser. Create a shortcut from the browser's share menu and place it on the Home Screen. Launch the login page from the Home Screen shortcut. Tap the ID/username field to invoke the passkey prompt. Complete passkey authentication. → One of the issues described above occurs. Environment: Device: iPhone SE OS: iOS 18.6.2

A blank keyboard appear in safari view controller Description: While clicking a password enter field in a page inside a safari view controller, keyboard will appear. However, the keyboard is blank out. The app is enterprise program app which is iPhone app but allow to install in iPad. The issue will only appear in iPadOS 26+ and it can be temporary fixed by changing the window size. Expected result: A keyboard with characters button should be appeared. Actual: A keyboard which is blank and no characters can be input. P.S. : A feedback ticket also raise : FB21921438

I have an iOS app that generates and renders a custom HTML document inside a UIWebView. After updating a device to iOS 26, the same HTML is rendered with noticeably smaller fonts compared to previous iOS versions. No code or HTML changes were made. Context HTML is generated dynamically and rendered in a UIWebView The HTML is embedded inside a custom XML wrapper The issue happens only on iOS 26 Earlier iOS versions render the font size correctly

Hello, why is Safari blocking my domains? https://fitgel.ru https://fittoma.ru https://ohota.pro There are no errors in them, other browsers respond normally.

Hello everyone, I am currently working on integrating a WebView into my macOS application, intended to allow users to browse tutorial webpages directly within the app. Although I’ve followed an example that appears syntactically correct, the WebView does not render any webpage content. Below is a code snippet for reference: import SwiftUI import WebKit struct HelpWebView: View { @State private var toggle = false @State private var page = WebPage() private var url: URL { toggle ? URL(string: "https://www.webkit.org")! : URL(string: "https://www.swift.org")! } var body: some View { WebView(page) .onAppear { page.load(URLRequest(url: url)) } .onChange(of: toggle) { page.load(URLRequest(url: url)) } .toolbar { Button("Reload", systemImage: "arrow.clockwise") { toggle.toggle() } } } } I would greatly appreciate any insights or suggestions on what might be causing this issue or how to resolve it. Thank you in advance for your help!

Hello everyone, I am currently working on integrating a WebView into my macOS application, intended to allow users to browse tutorial webpages directly within the app. Although I’ve followed an example that appears syntactically correct, the WebView does not render any webpage content. Below is a code snippet for reference: import SwiftUI import WebKit struct HelpWebView: View { @State private var toggle = false @State private var page = WebPage() private var url: URL { toggle ? URL(string: "https://www.webkit.org")! : URL(string: "https://www.swift.org")! } var body: some View { WebView(page) .onAppear { page.load(URLRequest(url: url)) } .onChange(of: toggle) { page.load(URLRequest(url: url)) } .toolbar { Button("Reload", systemImage: "arrow.clockwise") { toggle.toggle() } } } } I would greatly appreciate any insights or suggestions on what might be causing this issue or how to resolve it. Thank you in advance for your help!

I am using the native SwiftUI WebView and WebPage APIs (iOS 26+) and would like to implement file download functionality using the native SwiftUI WebView. However, I have not been able to find any APIs equivalent to WKDownload. In WKWebView, the WKDownload API can be used to handle downloads. I am looking for a similar API or recommended approach in the native SwiftUI WebView that would allow downloading files. If anyone has guidance or suggestions on how to implement this, I would appreciate your help.

Expected Behavior: Display the digit “6”. Actual Behavior: The rendered character appears as a composite glyph—the left half resembles “9” and the right half resembles “6”, resulting in a malformed digit. other examples： Environment & Characteristics: Occurs intermittently on iPhone 15 Pro Max and iPhone 16 Pro Max. Reproducible within the Taobao App, specifically in WKWebView. Font Used: AlibabaSans102_v1_TaoBao-Bd.ttf

I found that on iPhone 15 and later models, after upgrading to iOS 16.2, if a WKWebView's HTML page frequently receives large WebSocket data packets, it may trigger a rare bug: the already loaded WebView page can no longer establish network connections. Both HTTPS and WebSocket connections time out, and the network in the entire app becomes unusable. Even creating a new WebView instance to load a new page fails—it stays blank. Reloading a previously loaded WebView also results in a blank screen. (call [webview reload])Currently, the only solution when this happens is to restart the app. Reproduction environment: iPhone 15 and later models, iOS 26.2, cellular data (not reproducible on Wi-Fi) Log situation: When the blank screen occurs, the webViewWebContentProcessDidTerminate callback is not triggered. When creating a new webview instance and reloading a page during reproduction, only the didStartProvisionalNavigation callback is triggered, and no failure callbacks in Navigation are triggered.

We're trying to implement Cross-domain session check for SSO by making CORS request. is Intelligent Tracking Prevention blocks all cookies in CORS requests? I saw all cookies are blocked in CORS requests. We are not able to check the auth session in source domain. Are there anyway to bypass this without user interaction? benefitier.com -> source.com

In WKWebView, there is the WKUIDelegate method: func webView(_ webView: WKWebView, createWebViewWith configuration: WKWebViewConfiguration, for navigationAction: WKNavigationAction, windowFeatures: WKWindowFeatures) -> WKWebView? {} This delegate method provides a callback when a new window (for example, target="_blank") is requested in the web view. However, in native SwiftUI (iOS 26), WebView / WebPage APIs do not provide an equivalent delegate method to handle new window requests. As a workaround, I am using the following method: public func decidePolicy(for action: WebPage.NavigationAction, preferences: inout WebPage.NavigationPreferences) async -> WKNavigationActionPolicy {} In this method, when action.target == nil, I treat it as a new window request. My question: Is relying on action.target == nil in decidePolicy a reliable and future-safe way to detect new window requests in SwiftUI’s WebView, or is there a better or more recommended approach for handling target="_blank" / new window navigation in the SwiftUI WebView APIs? Code: public func decidePolicy(for action: WebPage.NavigationAction, preferences: inout WebPage.NavigationPreferences) async -> WKNavigationActionPolicy { guard let webPage = webPage else { return .cancel } // Handle case where target frame is nil (e.g., target="_blank" or window.open) // This indicates a new window request if action.target == nil { print("Target frame is nil - new window requested") // WORKAROUND: Until iOS 26 WebPage UI protocol is available, we handle new windows here // Try to create a new WebPage through UI plugins if handleCreateWebPage(for: webPage, navigationAction: action) != nil { // Note: The new WebPage has been created and published to the view return .allow } } return .allow }

This demonstrates an issue with SwiftUI's WebView on iPadOS. To repro, testing on iPad Simulator OS 26.2, macOS 26.2, Xcode 26.2. Download and unzip this project: https://drive.google.com/file/d/1z3MobjDf_RvvOtriXtinXvrJ7rGHwZRs/view?usp=share_link Set up Signing and Run the swiftui-webview App target on simulator (I'm using iPad Pro 13-inch (M5 simulator) Tap/click the fullscreen [ ] button in the bottom left corner of the webpage. Tap/click the 'X' button in the top left, to exit fullscreen. Result: The WebView exits fullscreen, but there is no content loaded, just a white background. It's also now not possible to visit other URLs - the WebView appears to be unresponsive and not repaint. This does not appear to affect macOS 26.2, just iPadOS.

aID is an ID service for 150+ newspaper sites in Norway. Since the middle of January the average login time with passkeys on our site https://www.aid.no/ has increased for Safari users, the number of logins using passkey in Safari has decreased dramatically. Previously Safari was the browser that provided the best user experience during login, since it triggered fingerprint reader straight away, but this behavior has vanished. Has something changed that we should be aware of, and is there something we can do to make conditional get great again? Without mediation conditional, the passkeys work as expected. In Chrome and Firefox, we get passkey suggestions in the username field, in Safari it's only password suggestions. To make things even stranger, the same code works as it used to in our test environment. It triggers a small popup by the username field and activates the fingerprint reader. If I cancel this, I can click on the Passwords icon and get passkey suggestion there.

Our app uses ASWebAuthenticationSession for login. This launches an incognito (ephemeral) browser window of the system’s default browser with the authentication URL. Recently, on the latest macOS Tahoe, we observe that: The browser application is launched(we could see in the dock) But the authentication window with the URL does not appear No error is returned to the app (silent failure)