我的应用是在mac intel时发生这个问题，从dump看程序一直卡在mmap_locked，不知要怎么修改 程序dump如下 amaran.txt

I can't find the arm_neon.h header file in macOS 15.6.1 This header file defines NEON intrinsics.

Hi There, I have been using my Mac Studio to complete some work in Python (which I normally do in Linux) and recently I got this error which has completely stopped all development as venvs will no longer work correctly: WARNING: Ignoring invalid distribution ... (and then whichever apps are currently installed in the venv This occurs for me on every install of any version of Python installed using any of the standard methods (installer). I've tried all the main points of advice on knowledgeable forums, but the difference between Python on Sequoia and Python on Linux is enough such that I am at an end of my debugging knowledge. I've even attempted to blast away any System Python changes with a recovery reinstall, but the problem persists. I've done almost exactly the same setup on my MacBook Air and it is fine ... but the Studio is now unavailable for Python development. I know I have probably dropped the ball somewhere but can't see the error myself so, I'm wondering if I should just blast away everything on the machine and go through the process of doing a clean install. Asking the experts in MacOS here so I can avoid the pain of doing that!

When I try to invoke the tkinter module in Python 3 that is bundled with Xcode Developer Tools, I get a message saying that my system version is too low: $ /usr/bin/python3 -m tkinter macOS 26 (2602) or later required, have instead 16 (1602) ! zsh: abort /usr/bin/python3 -m tkinter It seems like the system version reported is macOS 16, which I assume is the version code before the decision to rename all OS platforms to 26. This is a very low level mistake and should be fixed as soon as possible.

I have a class object created dynamically using Runtime, and I want to release some manually allocated memory resources when this object is deallocated. To achieve this, I added a custom implementation of the dealloc method using the following code: SEL aSel = NSSelectorFromString(@"dealloc"); class_addMethod(kvoClass, aSel, (IMP)custom_dealloc, method_getTypeEncoding(class_getInstanceMethod(kvoClass, aSel))); However, I encountered some issues. If I don't call the superclass's dealloc method in the cus_dealloc function, the superclass's dealloc implementation will not be executed. On the other hand, if I explicitly call the superclass's dealloc method, the program crashes. Here is the implementation of the cus_dealloc function: void custom_dealloc(id self, SEL _cmd) { // Release other memory ![]("https://developer.apple.com/forums/content/attachment/c7b0c16b-be23-4776-b8db-f22b661c5e7d" "title=iShot_2025-01-03_19.31.34.png;width=1080;height=1895") Class superClass = class_getSuperclass(object_getClass(self)); void (*originIMP)(struct objc_super *, SEL, ...) = (void *)objc_msgSendSuper; struct objc_super *objcSuper = &(struct objc_super){self, superClass}; originIMP(objcSuper, _cmd); } demo

Hello, I am a software engineer student and I have recently been getting problems on my Mac regarding the C/C++ libraries. I have used my macbook for uni work for months, but around 3 or 4 months ago my macbook could not compile my work since it couldnt find the basic libraries I was using. For example, iostream. I have been using VSCode, and what it exactly says is "cannot open source file "iostream". Please run the 'Select IntelliSense Configuration...' command to locate your system headers." I have tried researching, changing the include path, even using chatgpt, and nothing. Is anyone having this same problem, or is able to help me? If any other information is needed, please let me know!

I have a simple shell script as follows: #!/bin/bash OUTPUT="network.$(date +'%d-%m-%y').info.txt" SUPPORT_ID="emailaddress" echo "---------------------------------------------------" > $OUTPUT echo "Run date and time: $(date)" >> $OUTPUT echo "---------------------------------------------------" >> $OUTPUT ifconfig >> $OUTPUT echo "---------------------------------------------------" >> $OUTPUT echo "Network info written to file: $OUTPUT." echo "Please email this file to: $SUPPORT_ID." It just dumps the network config into a file. At some point I will have the file emailed out, but right now I'm just trying to figure out why the output looks like the following? bash ./test.sh .etwork info written to file: network.26-01-25.info.txt .lease email this file to: emailaddress Why in the world does the initial character of the last couple of "echo" commands get clipped and turned into periods? The echos for the output of the commands piped into the output file are fine. Strange... Any ideas?

I have a simple shell script as follows: #!/bin/bash OUTPUT="network.$(date +'%d-%m-%y').info.txt" SUPPORT_ID="email" echo "---------------------------------------------------" > $OUTPUT echo "Run date and time: $(date)" >> $OUTPUT echo "---------------------------------------------------" >> $OUTPUT ifconfig >> $OUTPUT echo "---------------------------------------------------" >> $OUTPUT echo "Network info written to file: $OUTPUT." echo "Please email this file to: $SUPPORT_ID." It just dumps the network config into a file. At some point I will have the file emailed out, but right now I'm just trying to figure out why the output looks like the following? bash ./test.sh .etwork info written to file: network.26-01-25.info.txt .lease email this file to: email Why in the world does the initial character of the last couple of "echo" commands get clipped and turned into periods? The echos for the output of the commands piped into the output file are fine. Strange... Any ideas?

Hello Apple Team, I'm trying to import the Audodesk FBX SDK to my Objective-C iOS Project. The SDK is written in C++, but has support for iOS and the iOS simulator architectures. I've added the path to the include folder in the Header Search Path I've also added the paths to libfbxsdk.a in the Library Search Paths Finally, I've added the libfbxsdk.a file to the Link Binary with Libraries. However, when I build the project, I get the following error: building for 'iOS', but linking in object file (/Users/Lond/Documents/v2/Autodesk/iOS/2020.3.7/lib/ios/debug/libfbxsdk.a[28](fbxalloc.cxx.o)) built for 'macOS' In the terminal, if I type the command: 
lipo -info libfbxsdk.a I get the message Non-fat file: libfbxsdk.a is architecture: arm64 confirming that I'm using the library for the correct architecture.   Do I need to add any other confifuration option? (Like the other linker flag or something else) I'm quite new to C++, and integrating a C++ SDK into iOS is not easy.   I'm using Mac Os Sonoma 14.6.1 Tested on Xcode 15.4 and 16.2 Target Device: iPhone 13 Pro (iOS 17.6.1) iOS FBX SDK version: 2020.3.7 Link to the SDK if needed: https://aps.autodesk.com/developer/overview/fbx-sdk   Any help would be greatly appreciated Thank you

I've created a Julia interface for Apple Accelerate's libSparse, via calling the library functions as if they were C (@ccall). I'm interested in using this in the context of power systems, where the sparse matrix is the Jacobian or the ABA matrix from a sparse grid network. However, I'm puzzled by the performance. I ran a sampling profiler on repeated in-place solves of Ax = b for a large sparse matrix A and random dense vectors b. (A is size 30k, positive definite so Cholesky factorization.) The 2 functions with the largest impact are _SparseConvertFromCoordinate_Double from libSparse.dylib, and BLASStateRelease from libBLAS.dylib. That strikes me as bizarre. This is an in-place solve: there should be minimal overheard from allocating/deallocating memory. Also, it seems strange that the library would repeatedly convert from coordinate form. Is this expected behavior? Thinking it might be an artifact of the Julia-C interface, I wrote up a similar program in C/Objective-C. I didn't profile it, but timing the same operation (repeated in-place solves of Ax = b for random vectors b, with the same matrix A as in the Julia) gave the same duration. I've attached the C/Objective-C below.profiling-comparison.m.txt If you're familiar with Julia, the following will give you the matrix I was working with: using PowerSystems, PowerNetworkMatrices sys = System("pglib_opf_case30000_goc.m") A = PowerNetworkMatrices.ABA_Matrix(sys).data where you can find the .m file here. (As a crude way to transfer A from Julia to C, I wrote the 3 arrays A.nzval, A.colptr, and A.rowval to .txt files as space-separated lists of numbers: the above C/objective-C reads in those files.) To duplicate my Julia profiling, do pkg> add AppleAccelerate#libSparse Profile--note the #libSparse part, these features aren't on the main branch--then run using AppleAccelerate, Profile # run previous code snippet to define A M, N = 10000, size(A)[1] bs = [rand(N) for _ in 1:M] aa_fact = AAFactorization(A) factor!(aa_fact) solve!(aa_fact, bs[1]) # pre-compile before we profile. Profile.init(n = 10^6, delay = 0.0003) @profile (for i in 1:M; solve!(aa_fact, bs[i]); end;) Profile.print(C = true, format = :flat, sortedby = :count)

Hello everyone, There is one thing about Objective-C's memory management that confuses me, which is a returned object's lifetime from methods with names doesn't start with "alloc", "new", "copy", or "mutableCopy". Take this as an example, when using NSBitmapImageRep's representationUsingType:properties: method, it returns an NSData object (reference: https://developer.apple.com/documentation/appkit/nsbitmapimagerep/representation(using:properties:)?language=objc). While testing this out, the NSData seemed to be an owned object (it doesn't get released until the end of the program). From what I understand, this may be an auto-released object which is released at the end of an autorelease pool block. Could someone explain this in more detail? What if I want to release that NSData object before the end of the autorelease pool block? How can I know which object is autoreleased, borrowed, or owned?

After ther Mac application is launched: Log error: CGSWindowShmemCreateWithPort failed on port 0 and when the application quit: No error handler for XPC error: Connection invalid Appear with Xcode 15.4 but not with 12.4 As repported by Steve4442 in "Can someone explain this message" https://Forums.Developer.Apple.com/Forums/Thread/727803 . The code don't use "windowNumbersWithOptions" Can I ignore this log message ?

My company wants to be insure that if my Objective-C to Swift conversions fail in anyway, that the app can revert to using the older Objective-C code. By using a remotely controllable flag, the app can switch which code runs as, both are compiled into the app. Essentially, I create a protocol that describes the original class, then both classes (with a "s" or "o" appended to them) conform to the protocol. Protocol: Object Objective-C class: oObject Swift class: sObject That said, I hit one issue that I just can't seem reason out. I create a Objective-C function that returns the appropriate class: Class<Object> classObject(void) { if (myFlag) { return [sObject class]; } else { return [oObject class]; } } Swift deals with this really well - I can create an initialized object using: let object = classObject().init() but I cannot find a way to do this in Objective-C: Object *object = [[classSalesForceData() alloc] init]; fails with "No known class method for selector 'alloc'" Is there a way to do this? David PS: my workaround is to return an allocated object: Object *createObject(void) { if (myFlag) { return [sObject alloc]; } else { return [oObject alloc]; } }

Hello I was wondering if there is a way to ensure that a C program I am writing can only write to 1 virtual page. I am trying to test how space efficient different Mallocs are and I need a way to ensure that the OS will not try to swap out pages making the space efficiency test pointless. I am on Mac OS Sonoma v14.5.

When I run app, it works on iOS16+ device. But when I run on iOS15 device just working on debug mode, if I run release or profile modeI got runtime error: Log: (lldb) dyld[4928]: Symbol not found: (_objc_claimAutoreleasedReturnValue) Referenced from: '/private/var/containers/Bundle/Application/C724D7C6-82FA-4AF3-AE83-EC035B4429A5/Runner.app/Frameworks/geolocator_apple.framework/geolocator_apple' Expected in: '/usr/lib/libobjc.A.dylib' thread #1, stop reason = signal SIGABRT frame #0: 0x0000000106cbb2cc dyld`__abort_with_payload + 8 dyld`__abort_with_payload: -&amp;gt; 0x106cbb2cc &amp;lt;+8&amp;gt;: b.lo 0x106cbb2e8 ; &amp;lt;+36&amp;gt; 0x106cbb2d0 &amp;lt;+12&amp;gt;: stp x29, x30, [sp, #-0x10]! 0x106cbb2d4 &amp;lt;+16&amp;gt;: mov x29, sp 0x106cbb2d8 &amp;lt;+20&amp;gt;: bl 0x106c8164c ; cerror_nocancel Target 0: (Runner) stopped. Flutter doctor : Doctor summary (to see all details, run flutter doctor -v): [✓] Flutter (Channel stable, 3.29.2, on macOS 15.2 24C101 darwin-arm64, locale en-VN) [✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0) [✓] Xcode - develop for iOS and macOS (Xcode 16.2) [✓] Chrome - develop for the web [✓] Android Studio (version 2024.2) [✓] VS Code (version 1.97.2)

I have a Swift Package that contains an Objective-C target. The target contains Objective-C literals but unfortunately the compiler says "Initializer element is not a compile-time constant", what am I doing wrong? Based on the error triggering in the upper half, I take it that objc_array_literals is on. My target definition looks like: .target( name: "MyTarget", path: "Sources/MySourcesObjC", publicHeadersPath: "include", cxxSettings: [ .unsafeFlags("-fobjc-constant-literals") ] ), I believe Objective-C literals are enabled since a long time but I still tried passing in the -fobjc-constant-literals flag and no luck. To be clear I'm not interested in a run-time initialization, I really want it to be compile time. Does anyone know what I can do?

I've been teaching myself Objective-C and I wanted to start creating projects that don't use ARC to become better at memory management and learn how it all works. I've been attempting to build and run applications, but I'm not really sure where to start as modern iOS development is used with Swift and memory management is handled. Is there any way to create modern applications that use Objective-C, UIKit, and not use ARC?

I’m creating an app using SwiftUI, and I would like to incorporate a small Java codebase that I created for the Android version of the app. Is there a way to package the Java code to work on iOS and macOS

hi, Is it possible to compare two vectors and get a boolean answer? example : uint642_t a; uint642_t b; .../... if(a == b) .../... how to do it ? thank

After swapping the -objectAtIndex: method using method_exchangeImplementations, it will cause continuous memory growth. Connect the iPhone and run the provided project. Continuously tap the iPhone screen. Observe Memory; it will keep growing. Sample code