My high-level goal is to add support for Game Mode in a Java game, which launches via a macOS "launcher" app that runs the actual java game as a separate process (e.g. using the java command line tool). I asked this over in the Graphics & Games section and was told this, which is why I'm reposting this here. I'm uncertain how to speak to CLI tools and Java games launched from a macOS app. These sound like security and sandboxing questions which we recommend you ask about in those sections of the forums. The system seems to decide whether to enable Game Mode based on values in the Info.plist (e.g. for LSApplicationCategoryType and GCSupportsGameMode). However, the child process can't seem to see these values. Is there a way to change that? (The rest of this post is copied from my other forums post to provide additional context.) Imagine a native macOS app that acts as a "launcher" for a Java game.** For example, the "launcher" app might use the Swift Process API or a similar method to run the java command line tool (lets assume the user has installed Java themselves) to run the game. I have seen How to Enable Game Mode. If the native launcher app's Info.plist has the following keys set: LSApplicationCategoryType set to public.app-category.games LSSupportsGameMode set to true (for macOS 26+) GCSupportsGameMode set to true The launcher itself can cause Game Mode to activate if the launcher is fullscreened. However, if the launcher opens a Java process that opens a window, then the Java window is fullscreened, Game Mode doesn't seem to activate. In this case activating Game Mode for the launcher itself is unnecessary, but you'd expect Game Mode to activate when the actual game in the Java window is fullscreened. Is there a way to get Game Mode to activate in the latter case? ** The concrete case I'm thinking of is a third-party Minecraft Java Edition launcher, but the issue can also be demonstrated in a sample project (FB13786152). It seems like the official Minecraft launcher is able to do this, though it's not clear how. (Is its bundle identifier hardcoded in the OS to allow for this? Changing a sample app's bundle identifier to be the same as the official Minecraft launcher gets the behavior I want, but obviously this is not a practical solution.)

I’m implementing passkey registration and authentication in an iOS 17 app with a credential provider extension, but I’m running into an issue. Setup: I have a credential provider target configured. The app correctly shows the pop-up to register the passkey with my app. My Info.plist is set up properly. Issue: When the following function is triggered: override func prepareInterface(forPasskeyRegistration registrationRequest: ASCredentialRequest) { "code to generate registrationRequest..." let controller = ASAuthorizationController(authorizationRequests: [registrationRequest]) controller.delegate = self controller.presentationContextProvider = self controller.performRequests() } I get the following error: Domain=com.apple.AuthenticationServices.AuthorizationError Code=1004 I do not own the relying party domain (e.g., https://webauthn.io), so I cannot configure an apple-app-site-association file on the website. Question: How can I register and authenticate passkeys on any site that allows passkeys (such as webauthn.io) when I don’t control the webpage? Are there any workarounds or best practices for handling this in iOS 17? Any insights would be greatly appreciated!

Hi everyone, I'm developing a C++ plugin (.bundle) for a third-party host application (Autodesk Maya) on macOS, and I'm finalizing the design for our licensing system. The plugin is distributed outside the Mac App Store. My goal is to securely store a license key in the user's Keychain. After some research, my proposed implementation is as follows: On activation, store the license data in the user's login keychain as a Generic Password (kSecClassGenericPassword) using the SecItem APIs. To ensure the plugin can access the item when loaded by Maya, I will use a specific Keychain Access Group (e.g., MY_TEAM_ID.com.mywebsite). The final .bundle will be code-signed with our company's Developer ID certificate. The signature will include an entitlements file (.entitlements) that specifies the matching keychain-access-groups permission. My understanding is that this combination of a unique Keychain Access Group and a properly signed/entitled bundle is the key to getting reliable Keychain access. This should also correctly trigger the one-time user permission prompt on first use. Does this sound like the correct and most robust approach for this scenario? Are there any common pitfalls with a plugin's Keychain access from within a host app that I should be aware of? Thanks for any feedback!

In the hopes of saving others time, the updated demo project (i.e. the new Shiny) can be found from the video 'Resources' section under 'Performing fast account creation with passkeys'. The beta documentation can also be found from there. All of the new functionality is available only on *OS 26 at this time.

Trying to apply 'always trust' to certificate added to keychain using both SecItemAdd() and SecPKCS12Import() with SecTrustSettingsSetTrustSettings(). I created a launchdaemon for this purpose. AuthorizationDB is modified so that any process running in root can apply trust to certificate. let option = SecTrustSettingsResult.trustRoot.rawValue // SecTrustSettingsResult.trustAsRoot.rawValue for non-root certificates let status = SecTrustSettingsSetTrustSettings(secCertificate, SecTrustSettingsDomain.admin, [kSecTrustSettingsResult: NSNumber(value: option.rawValue)] as CFTypeRef). Above code is used to trust certificates and it was working on os upto 14.7.4. In 14.7.5 SecTrustSettingsSetTrustSettings() returns errAuthorizationInteractionNotAllowed. In 15.5 modifying authorization db with AuthorizationRightSet() itself is returning errAuthorizationDenied.Tried manually editing authorization db via terminal and same error occurred. Did apple update anything on Security framework? Any other way to trust certificates?

There’s a critical, actively exploited vulnerability in Apple’s iOS activation servers allowing unauthenticated XML payload injection: https://cyberpress.org/apple-ios-activation-vulnerability/ This flaw targets the core activation process, bypassing normal security checks. Despite the severity, it’s barely discussed in public security channels. Why is this not being addressed or publicly acknowledged? Apple developers and security researchers should urgently review and audit activation flows—this is a direct attack vector on device trust integrity. Any insights or official response appreciated.

https://developer.apple.com/documentation/apptrackingtransparency/attrackingmanager/authorizationstatus/notdetermined Note: Discussion If you call ATTrackingManager.trackingAuthorizationStatus in macOS, the result is always ATTrackingManager.AuthorizationStatus.notDetermined. So, does macOS support getting ATT?

We’ve identified an issue in our app where, upon clicking the "Call Customer Center" button, users are unexpectedly shown a logo and message option on a native pop-up window. However, this wasn't the case before, and it should only display a phone number to dial, which was given inside our code. This is incorrect and misleading for our users, as: We are a Canadian-based service and have no affiliation with US messaging chat. The messaging feature was never enabled or intended for our app. Our app should only initiate a phone call to our customer support center — no messages or branding from third parties should appear

Hi everyone, I’d like to clarify something regarding the behavior of Team IDs after an app transfer between Apple Developer accounts. I have an app update that enforces a force update for all users. My plan is to release this update under the current developer account, and then proceed with transferring the app to a different developer account shortly afterward. My concern is: once the transfer is complete, will users who download the same app version (released before the transfer) be logged out due to a change in Team ID? Specifically, does the transferred app continue to use the original Team ID (used to sign the last submitted build), or does the Team ID change immediately upon transfer — affecting Keychain access? Any insights or confirmation on this would be greatly appreciated. Thanks!

Hello! I do know apple does not support electron, but I do not think this is an electron related issue, rather something I am doing wrong. I'd be curious to find out why the keychain login is happenning after my app has been signed with the bundleid, entitlements, and provision profile. Before using the provision profile I did not have this issue, but it is needed for assessments feature. I'm trying to ship an Electron / macOS desktop app that must run inside Automatic Assessment Configuration. The build signs and notarizes successfully, and assessment mode itself starts on Apple-arm64 machines, but every single launch shows the system dialog that asks to allow access to the "login" keychain. The dialog appears on totally fresh user accounts, so it's not tied to anything I store there. It has happened ever since I have added the provision profile to the electron builder to finally test assessment out. entitlements.inherit.plist keys <key>com.apple.security.cs.allow-jit</key> <true/> <key>com.apple.security.cs.allow-unsigned-executable-memory</key> <true/> entitlements.plist keys: <key>com.apple.security.cs.allow-jit</key> <true/> <key>com.apple.security.cs.allow-unsigned-executable-memory</key> <true/> <key>com.apple.developer.automatic-assessment-configuration</key> <true/> I'm honestly not sure whether the keychain is expected, but I have tried a lot of entitlement combinations to get rid of It. Electron builder is doing the signing, and we manually use the notary tool to notarize but probably irrelevant. mac: { notarize: false, target: 'dir', entitlements: 'buildResources/entitlements.mac.plist', provisioningProfile: 'buildResources/xyu.provisionprofile', entitlementsInherit: 'buildResources/entitlements.mac.inherit.plist', Any lead is welcome!

Title: Sporadical - Permissions Not Cleared After App Uninstallation on iOS18 I install and launch my private MAUI App I ask for example Bluetooth permissions (can be any other permission) I tap Allow button on native settings (or Don't Allow) I unistall app from real phone (we can wait for a while) I install and launch My Private MAUI App I ask for example Bluetooth permissions <- here is an issue. Bluetooth is already granted, so I cannot ask for it again. Occurrence: This issue occurs inconsistently: On iOS 18.5: approximately 5 out of 10 times On iOS 17: approximately 1 out of 50 times Tested using my automated system using Appium latest. After each scenario I unistall app using: "mobile: removeApp" with bundleId

Step1. Update system.login.screensaver authorizationdb rule to use “authenticate-session-owner-or-admin”( to get old SFAutorizationPluginView at Lock Screen ). Here I will use my custom authorization plugin. Step 2. Once the rule is in place, logout and login, now click on Apple icon and select “Lock Screen”. Is there a way programmatically to update the Lock Icon and the test getting displayed on the first Unlock screen? When I write a custom authorisation plug-in, I am getting control of the text fields and any consecutive screen I add from there on. But all I want is to update the lock icon and text fields on 1st unlock display itself. Can you please suggest how I can achieve this? Here is the screenshot with marked areas I am looking control for.

I am using the CryptoKit SecureEnclave enum to generate Secure Enclave keys. I've got a couple of questions: What is the lifetime of these keys? When I don't store them somewhere, how does the Secure Enclave know they are gone? Do backups impact these keys? I.e. can I lose access to the key when I restore a backup? Do these keys count to the total storage capacity of the Secure Enclave? If I recall correctly, the Secure Enclave has a limited storage capacity. Do the SecureEnclave key instances count towards this storage capacity? What is the dataRepresentation and how can I use this? I'd like to store the Secure Enclave (preferably not in the Keychain due to its limitations). Is it "okay" to store this elsewhere, for instance in a file or in the UserDefaults? Can the dataRepresentation be used in other apps? If I had the capability of extracting the dataRepresentation as an attacker, could I then rebuild that key in my malicious app, as the key can be rebuilt with the Secure Enclave on the same device, or are there measures in place to prevent this (sandbox, bundle id, etc.)

Hi Apple Developer Support, I’m building a macOS app that acts as a default browser. I can confirm that I can set it correctly through System Settings → Default Web Browser. The app implements ASWebAuthenticationSessionWebBrowserSessionHandling to intercept Single Sign-On (SSO) flows. To handle requests, it presents SSO pages in a WKWebView embedded in a window that this app creates and owns - this works perfectly for the initial login flow. However, after I close my WebView window and then launch Safari or Chrome, any subsequent SSO requests open in the newly-launched browser instead of my custom browser, even though it remains selected as the default in System Settings. I’d appreciate any insight on why the system “hands off” to Safari/Chrome in this scenario, and how I can keep my app consistently intercepting all ASWebAuthenticationSession requests. Here are the steps that break down the issue: Launch & confirm that the custom default browser app is the default browser in System Settings → Default Web Browser. Trigger SSO (e.g., try to log in to Slack). App’s WKWebView appears, and the SSO UI works end-to-end. Close the WebView window (I have windowShouldClose callback where I cancel the pending session). Manually launch Safari or Chrome. Trigger SSO again. Observed behaviour: the login URL opens in Safari/Chrome. I am using macOS 15.3.2

Hi, A certificate imported on macOS 15 using the security command with the "non-exportable" option was imported in an exportable state. I would like to know how to change this certificate to be non-exportable. Regards, CTJ

First, I do not publish my application to the AppStore, but I need to customize a sandbox environment. It seems that sandbox-exec cannot configure entitlements, so I have used some other APIs, such as sandbox_compile_entitlements and sandbox_apply_container. When encountering the entitlement "com.apple.security.files.user-selected.read-only", I am unsure how to correctly write sandbox profile to implement this. Can anyone help me?

Dear Apple Developer Support, We are currently encountering a recurring issue with the DeviceCheck API across multiple devices in our production environment. The following error is frequently returned: com.apple.devicecheck.error 0 We would like to ask the following: What are the possible underlying causes that could lead to this specific error code (0) in the DeviceCheck API? Is there any known behavior or condition where Wi-Fi network configurations (e.g., DNS filtering, proxy settings, captive portals) could result in this error? Are there known timeouts, connectivity expectations, or TLS-level requirements that the DeviceCheck API enforces which could fail silently under certain network conditions? Is this error ever triggered locally (e.g., client library-level issues) or is it always from a failed communication with Apple’s servers? Any technical clarification, documentation, or internal insight into this error code would be greatly appreciated. This would help us significantly narrow down root causes and better support our users

Hello, I'm receiving an unknown error instead of the excluded credentials error when using the "Save on another device" option for Passkey creation. When creating the ASAuthorizationPlatformPublicKeyCredentialProvider request to pass to the ASAuthorizationController. The excludedCredentials property is used to add a list of credentials to exclude in the registration process. This is to prevent duplicate passkeys from being created if one already exists for the user. When trying to create a duplicate passkey using the same device, the ASAuthorizationControllerDelegate method authorizationController(controller, didCompleteWithError:) is called. The error received has localized description “At least one credential matches an entry of the excludeCredentials list in the platform attached authenticator." When trying to create a duplicate passkey using the “Save on another device” option. The delegate method is called, but the error received has code 1000 ("com.apple.AuthenticationServices.AuthorizationError" - code: 1000). Which maps to the unknown error case in ASAuthorization error type.

Hi, I’m currently implementing App Attest attestation validation on the development server. However, I’m receiving a 403 Forbidden response when I POST a CBOR-encoded payload to the following endpoint: curl -X POST -H "Content-Type: application/cbor" --data-binary @payload.cbor 'https://data-development.appattest.apple.com' Here’s how I’m generating the CBOR payload in Java: Map<String, Object> payload = new HashMap<>(); payload.put("attestation", attestationBytes); // byte[] from DCAppAttestService payload.put("clientDataHash", clientDataHash); // SHA-256 hash of the challenge (byte[]) payload.put("keyId", keyIdBytes); // Base64-decoded keyId (byte[]) payload.put("appId", TEAM_ID + "." + BUNDLE_ID); // e.g., "ABCDE12345.com.example.app" ObjectMapper cborMapper = new ObjectMapper(new CBORFactory()); byte[] cborBody = cborMapper.writeValueAsBytes(payload); I’m unsure whether the endpoint is rejecting the payload format or if the endpoint itself is incorrect for this stage. I’d appreciate clarification on the following: 1. Is https://data-development.appattest.apple.com the correct endpoint for key attestation in a development environment? 2. Should this endpoint accept CBOR-encoded payloads, or is it only for JSON-based assertion validation? 3. Is there a current official Apple documentation that lists: • the correct URLs for key attestation and assertion validation (production and development), • or any server-side example code (e.g., Java, Python) for handling attestation/validation on the backend? So far, I couldn’t find an official document that explicitly describes the expected HTTP endpoints for these operations. If there’s a newer guide or updated API reference, I’d appreciate a link. Thanks in advance for your help.

Dear Apple Developer Support Team, We are experiencing a recurring issue with the DeviceCheck API where the following error is being returned: com.apple.devicecheck.error 0 Upon analyzing our logs, we have noticed that this error occurs significantly more often when users are connected to Wi-Fi networks, compared to mobile networks. This leads us to suspect that there might be a relationship between Wi-Fi configuration and the DeviceCheck service’s ability to generate or validate tokens. We would like to know: Is this error code (0) known to be caused by specific types of network behavior or misconfigurations on Wi-Fi networks (e.g., DNS filtering, firewall restrictions, proxy servers)? Are there any recommended best practices for ensuring reliable DeviceCheck API communication over Wi-Fi networks? Additionally, could you please clarify what general conditions could trigger this com.apple.devicecheck.error 0? The lack of specific documentation makes debugging this issue difficult from our side. Any guidance or internal documentation on this error code and its potential causes would be greatly appreciated. IDE: Xcode 16.3 Looking forward to your support. Best regards,