Since iOS/iPadOs/tvOS 18 then we have run into a new problem with streaming of FairPlay encrypted video. On the affected streams then the audio plays perfectly but the video freezes for periods of a few seconds, so it will freeze for 5s or so, then be OK for a few seconds then freeze again. It is entirely reproducible when all the following are true the video streams were produced by a particular encoder (or particular settings, not sure on that) the video must be encrypted device is running some variety of iOS 18 (or iPadOS or tvOS) the device is an affected device Known devices are AppleTV 4K 2nd Gen iPad Pro 11" 1st and 2nd gen Devices known not to show the problem are all other AppleTV models iPhone 13 Pro and 16 Pro If we stream the same content, but unencrypted, then it plays perfectly, or if you play the encrypted stream on, say, tvOS 17. When the freezing occurs then we can see in the console logs repeating blocks of lines like the following default 18:08:46.578582+0000 videocodecd AppleAVD: AppleAVDDecodeFrameResponse(): Frame# 5771 DecodeFrame failed with error 0x0000013c default 18:08:46.578756+0000 videocodecd AppleAVD: AppleAVDDecodeFrameInternal(): failed - error: 316 default 18:08:46.579018+0000 videocodecd AppleAVD: AppleAVDDecodeFrameInternal(): avdDec - Frame# 5771, DecodeFrame failed with error: 0x13c default 18:08:46.579169+0000 videocodecd AppleAVD: AppleAVDDisplayCallback(): Asking fig to drop frame # 5771 with err -12909 - internalStatus: 315 also more relevant looking lines: default 18:17:39.122019+0000 kernel AppleAVD: avdOutbox0ISR(): FRM DONE (cid: 2.0, fno: 10970, codecT: 1) FAILED!! default 18:17:39.122155+0000 videocodecd AppleAVD: AppleAVDDisplayCallback(): Asking fig to drop frame # 10970 with err -12909 - internalStatus: 315 default 18:17:39.122221+0000 kernel AppleAVD: ## client[ 2.0] @ frm 10970, errStatus: 0x10 default 18:17:39.122338+0000 kernel AppleAVD: decodeFailIdentify(): VP error bit 4 has EP3B0 error default 18:17:39.122401+0000 kernel AppleAVD: processHWResponse(): clientID 2.0 frameNumber 10970 error 315, offsetIndex 10, isHwErr 1 So it would seem to me that one of the following must be happening: When these particular HLS files are encrypted then the data is being corrupted in some way that played back on iOS 17 and earlier but now won't on 18+, or There's a regression in iOS 18 that means that this particular format of video data is corrupted on decryption If anyone has seen similar behaviour, or has any ideas how to identify which of the two scenarios it is, please say. Unfortunately we don't have control of the servers so can't make changes there unless we can identify they are definitely the cause of the problem. Thanks, Simon.

I am creating an app that decodes H.265 elementary streams on iOS. I use VideoToolBox to decode from H.265 to NV12. The decoded data is enqueued in the CMSampleBufferDisplayLayer as a CMSampleBuffer. However, nothing is displayed in the VideoPlayerView. It remains black. The decoding in VideoToolBox is successful. I confirmed this by saving the NV12 data in the CMSampleBuffer to a file and displaying it using a tool. Why is nothing displayed in the VideoPlayerView? I can provide other source code as well. // // ContentView.swift // H265Decoder // // Created by Kohshin Tokunaga on 2025/02/15. // import SwiftUI struct ContentView: View { var body: some View { VStack { Text("H.265 Player (temp.h265)") .font(.headline) VideoPlayerView() .frame(width: 360, height: 640) // Adjust or make it responsive for iOS } .padding() } } #Preview { ContentView() } // // VideoPlayerView.swift // H265Decoder // // Created by Kohshin Tokunaga on 2025/02/15. // import SwiftUI import AVFoundation struct VideoPlayerView: UIViewRepresentable { // Return an H265Player as the coordinator, and start playback there. func makeCoordinator() -> H265Player { H265Player() } func makeUIView(context: Context) -> UIView { let uiView = UIView(frame: .zero) // Base layer for attaching sublayers uiView.backgroundColor = .black // Screen background color (for iOS) // Create the display layer and add it to uiView.layer let displayLayer = context.coordinator.displayLayer displayLayer.frame = uiView.bounds displayLayer.backgroundColor = UIColor.clear.cgColor uiView.layer.addSublayer(displayLayer) // Start playback context.coordinator.startPlayback() return uiView } func updateUIView(_ uiView: UIView, context: Context) { // Reset the frame of the AVSampleBufferDisplayLayer when the view's size changes. let displayLayer = context.coordinator.displayLayer displayLayer.frame = uiView.layer.bounds // Optionally update the layer's background color, etc. uiView.backgroundColor = .black displayLayer.backgroundColor = UIColor.clear.cgColor // Flush transactions if necessary CATransaction.flush() } } // // H265Player.swift // H265Decoder // // Created by Kohshin Tokunaga on 2025/02/15. // import Foundation import AVFoundation import CoreMedia class H265Player: NSObject, VideoDecoderDelegate { let displayLayer = AVSampleBufferDisplayLayer() private var decoder: H265Decoder? override init() { super.init() // Initial configuration for the display layer displayLayer.videoGravity = .resizeAspect // Initialize the decoder (delegate = self) decoder = H265Decoder(delegate: self) // For simple playback, set isBaseline to true decoder?.isBaseline = true } func startPlayback() { // Load the file "cars_320x240.h265" guard let url = Bundle.main.url(forResource: "temp2", withExtension: "h265") else { print("File not found") return } do { let data = try Data(contentsOf: url) // Set FPS and video size as needed let packet = VideoPacket(data: data, type: .h265, fps: 30, videoSize: CGSize(width: 1080, height: 1920)) // Decode as a single packet decoder?.decodeOnePacket(packet) } catch { print("Failed to load file: \(error)") } } // MARK: - VideoDecoderDelegate func decodeOutput(video: CMSampleBuffer) { // When decoding is complete, send the output to AVSampleBufferDisplayLayer displayLayer.enqueue(video) } func decodeOutput(error: DecodeError) { print("Decoding error: \(error)") } }

Capturing more than one display is no longer working with macOS Sequoia. We have a product that allows users to capture up to 2 displays/screens. Our application is using gstreamer which in turn is based on AVFoundation. I found a quick way to replicate the issue by just running 2 captures from separate terminals. Assuming display 1 has device index 0, and display 2 has device index 1, here are the steps: install gstreamer with brew install gstreamer Then open 2 terminal windows and launch the following processes: terminal 1 (device-index:0): gst-launch-1.0 avfvideosrc -e device-index=0 capture-screen=true ! queue ! videoscale ! video/x-raw,width=640,height=360 ! videoconvert ! osxvideosink terminal 2 (device-index:1): gst-launch-1.0 avfvideosrc -e device-index=1 capture-screen=true ! queue ! videoscale ! video/x-raw,width=640,height=360 ! videoconvert ! osxvideosink The first process that is launched will show the screen, the second process launched will not. Testing this on macOS Ventura and Sonoma works as expected, showing both screens. I submitted the same issue on Feedback Assistant: FB15900976

I'm wondering if someone happened issues with currentPlaybackRate in released version of iOS 26.0? There is no issue happened in case of iOS 18.5. When I changed currentPlaybackRate on iOS 26.0, it seems to unexpectedly change currentPlaybackRate to be 0 or 1.0 forcibly no matter DRM or non-DRM contents. And also, playing music will be abnormal behavior and unstable with noise if currentPlaybackRate is not 1.0. And changes stop state and play state frequently.

AVAudioSessionCategoryOptionAllowBluetooth is marked as deprecated in iOS 8 in iOS 26 beta 5 when this option was not deprecated in iOS 18.6. I think this is a mistake and the deprecation is in iOS 26. Am I right? It seems that the substitute for this option is "AVAudioSessionCategoryOptionAllowBluetoothHFP". The documentation does not make clear if the behaviour is exactly the same or if any difference should be expected... Has anyone used this option in iOS 26? Should I expect any difference with the current behaviour of "AVAudioSessionCategoryOptionAllowBluetooth"? Thank you.

Movies taken with Android phones store their location metadata (and probably others) in ways that are ignored by Apple's ecosystem (QuickTime Player, Photos.app). I am considering creating a Spotlight importer so that this metadata is available to the sytem. But I have a couple of questions: Can a Spotlight importer add new data (like location) to the data that the standard importer already captured? Or would the new importer need to take over the whole data gathering? If so, would macOS allow that? Would that Spotlight importer be somehow used by e.g. Photos.app and QT Player to capture the location? Or would this end up in Spotlight "knowing" the location but Photos.app ignoring it? If so, maybe there is something more broadly useful than a Spotlight importer?

Hi We’re updating our KSM to support SPC v2/v3 and currently operate with both legacy SDK4 credentials (ASK + 1024 cert) and SDK26 credentials (certificate bundle + provisioning data + 1024/2048 keys). Our client apps run across a wide range of iOS/tvOS versions, so we want to follow Apple’s recommended client strategy for certificate selection. The docs describe SHA‑1 vs SHA‑256 in the SPC header, but do not specify which OS versions should use SDK4 vs SDK26 credentials. Could you clarify: Is there an official minimum iOS/tvOS version where you recommend SDK26 credentials for client apps? For older OS versions (e.g. iOS 15), is SDK4 still the recommended choice for client apps? Are there any official migration guidelines for client apps moving from SDK4 to SDK26 credentials? Thanks in advance.

Hello, I am developing a custom player SDK using AVPlayer to support HLS and LL-HLS live streaming. I have some questions about the internal logic of AVPlayer regarding ABR, as this information is not explicitly covered in the documentation. ABR Switching Logic: Does AVPlayer trigger bitrate switching primarily based on stall occurrences (buffer starvation)? I am curious if the switching logic is reactive to stalls or if it proactively switches to prevent them based on throughput estimation. Developer Controls for ABR: To influence or control the ABR selection, are preferredPeakBitRate and preferredForwardBufferDuration the only properties available to developers? Are there any other recommended APIs to assist with ABR decisions? Thank you for your help.

Hi, when using ApplicationMusicPlayer from MusicKit my app automatically gets the media controls on the lock screen: Play/ Pause, Skip Buttons, Playback Position etc. I would like to customize these. Tried a bunch of things, e.g. using MPRemoteCommandCenter. So far I haven't had any success. Does anyone know how I can customize the media controls of ApplicationMusicPlayer. Thank you.

FxPlug is one of Apple’s official SDKs, recently updated to version 4.3.2. In theory the SDK should guarantee third-parties can build plug-ins that are backward compatible with older versions of Final Cut Pro, Motion and Compressor. FxPlug SDK includes two frameworks that third-party developers like me end up bundling inside our third-party plugins: FxPlug.framework and PlugInManager.framework. Behind the scenes, the SDK relies on PlugInKit, but the FxPlug.framework provides abstractions so that third-parties don't have to handle the intricacies of XPC directly. The most recent version of FxPlug.framework included with the SDK was possibly built with an error: the Info.plist shows a LSMinimumSystemVersion entry of 14.6, suggesting the binary may have been compiled and linked with MACOSX_DEPLOYMENT_TARGET set to 14.6 by accident. The problem: when older versions of Final Cut Pro or Motion load a third-party plugin (itself built with the appropriate deployment target, macOS 11 or 12, for example) on pre-macOS 14.6, the dynamic linker immediately loads Apple’s own FxPlug.framework, but this causes the process to crash immediately: Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 libobjc.A.dylib 0x7ff81e065955 map_images_nolock + 5399 1 libobjc.A.dylib 0x7ff81e0643d6 map_images + 67 2 dyld 0x10bd551fb invocation function for block in dyld4::RuntimeState::setObjCNotifiers(void (*)(unsigned int, char const* const*, mach_header const* const*), void (*)(char const*, mach_header const*), void (*)(char const*, mach_header const*)) + 275 3 dyld 0x10bd506c9 dyld4::RuntimeState::withLoadersReadLock(void () block_pointer) + 41 4 dyld 0x10bd550e2 dyld4::RuntimeState::setObjCNotifiers(void (*)(unsigned int, char const* const*, mach_header const* const*), void (*)(char const*, mach_header const*), void (*)(char const*, mach_header const*)) + 82 5 dyld 0x10bd68d45 dyld4::APIs::_dyld_objc_notify_register(void (*)(unsigned int, char const* const*, mach_header const* const*), void (*)(char const*, mach_header const*), void (*)(char const*, mach_header const*)) + 79 6 libobjc.A.dylib 0x7ff81e064244 _objc_init + 1279 7 libdispatch.dylib 0x7ff81e01d993 _os_object_init + 13 8 libdispatch.dylib 0x7ff81e02b1b8 libdispatch_init + 311 9 libSystem.B.dylib 0x7ff828fd585f libSystem_initializer + 238 10 dyld 0x10bd5ae4f invocation function for block in dyld4::Loader::findAndRunAllInitializers(dyld4::RuntimeState&) const + 182 11 dyld 0x10bd81aad invocation function for block in dyld3::MachOAnalyzer::forEachInitializer(Diagnostics&, dyld3::MachOAnalyzer::VMAddrConverter const&, void (unsigned int) block_pointer, void const*) const + 242 12 dyld 0x10bd78e26 invocation function for block in dyld3::MachOFile::forEachSection(void (dyld3::MachOFile::SectionInfo const&, bool, bool&) block_pointer) const + 557 13 dyld 0x10bd47db3 dyld3::MachOFile::forEachLoadCommand(Diagnostics&, void (load_command const*, bool&) block_pointer) const + 129 14 dyld 0x10bd78bb7 dyld3::MachOFile::forEachSection(void (dyld3::MachOFile::SectionInfo const&, bool, bool&) block_pointer) const + 179 15 dyld 0x10bd81604 dyld3::MachOAnalyzer::forEachInitializer(Diagnostics&, dyld3::MachOAnalyzer::VMAddrConverter const&, void (unsigned int) block_pointer, void const*) const + 466 16 dyld 0x10bd5ad82 dyld4::Loader::findAndRunAllInitializers(dyld4::RuntimeState&) const + 144 17 dyld 0x10bd6165a dyld4::PrebuiltLoader::runInitializers(dyld4::RuntimeState&) const + 30 18 dyld 0x10bd6e76e dyld4::APIs::runAllInitializersForMain() + 38 19 dyld 0x10bd4c38d dyld4::prepare(dyld4::APIs&, dyld3::MachOAnalyzer const*) + 3443 20 dyld 0x10bd4b4e4 start + 388 Can someone at Apple with the right domain expertise confirm that this is the type of crash you would see because the framework was built assuming it would run on macOS 14.6 and later, and when facing an older environment (e.g. ObjC runtime) it lacks extra code that would ensure backward compatibility with the earlier ObjC runtime found on macOS 12.x?

I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?

I'm getting this error when I launch my application on the iPhone 14 Pro via Xcode. Everything builds OK. I"m using the audio kit plugin and Sound Pipe Audiokit. The error starts as soon as I start the app and will carry on repeatedly. I have background processing turned on as I'd like the sounds to play when the phone is locked via the headphones. I can't find anything online about this error. None of my catches are printing anything in the logs either. So I don't know if this is just something that pops up repeatedly or whether there is something fundamentally wrong. private func setupAudioSession() { do { let session = AVAudioSession.sharedInstance() try session.setCategory(.playback, mode: .default, options: [.mixWithOthers]) try session.setActive(true, options: .notifyOthersOnDeactivation) } catch { errorMessage = "Failed to set up audio session: (error.localizedDescription)" print(errorMessage ?? "") } } // MARK: - Background Task Handling private func setupBackgroundTaskHandling() { // Handle app entering background notificationObservers.append( NotificationCenter.default.addObserver( forName: UIApplication.didEnterBackgroundNotification, object: nil, queue: .main, using: { [weak self] _ in // Safely unwrap self guard let self = self else { return } self.handleBackgroundTransition() } ) ) I'm not sure if this is the code causing the issue. Any help would be gratefully appreciated. This is my first app I'm working on .

Hi, I am trying to remove the audio controls for my app on the lock screen. Since I use WKWebView, there are 3 audio tags in my html and I play and pause em via JS. However, if I do not play any sound since app launch, there are no audio controls on the lock screen. But if I play one of those 3 files (they are even less then 3 Sec sound effects e.g. for buttons) the audio controls appears on lock screen. Note even when the sounds on pause() or not playing they were listed on the lock screen. What I have tried so far without success MPNowPlayingInfoCenter.default().nowPlayingInfo = [:] and ``try audioSession.setCategory(.playback, mode: .default, options: []) try audioSession.setActive(false, options: .notifyOthersOnDeactivation)`` and UIApplication.shared.endReceivingRemoteControlEvents() Another problem is that the app scales with iOS system settings "display zoom". Is there a way to deny it? It is latest Xcode verion 16.3 and iOS 18. I have no background mode in my Capabilities. Nothing worked so far. Has anyone an idea? Greetings

quotes are displayed incorrectly in subtitles of AVPlayerViewController when streaming VOD content using HLS. single quote ' (escaped ') is displayed as apos; double quotes " (escaped ") is displayed as quot; following the vtt specification. The same stream works fine in VLC player, showing quotes correctly in subtitles. subtitle vtt files use Content-Type: text/vtt WEBVTT X-TIMESTAMP-MAP=LOCAL:490014:06:04.000,MPEGTS:158764568760056 example line: 490014:05:46.000 --> 490014:05:50.440 align:start line:83% position:14% and the playlist has: #EXT-X-MEDIA:TYPE=SUBTITLES,GROUP-ID="subs",LANGUAGE="da",NAME="Dansk",AUTOSELECT=YES,CHARACTERISTICS="public.accessibility.transcribes-spoken-dialog,public.accessibility.describes-music-and-sound",URI="subs/dan_5/playlist.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=780000,CODECS="mp4a.40.5,avc1.42c01e",RESOLUTION=256x144,AUDIO="audio-aac",SUBTITLES="subs" lære dig endnu bedre at kende." adding 'wvtt' to CODECS list in playlist does not make a difference. Is this a known bug? Is there a workaround? I guess the AVResourceLoaderDelegate can be used to intercept and parse the subtitle files, but it seems like quite a hack and not really intended to be used for this.

Hello, We have Video Stream app. It has HLS VOD Content. We supply 1080p, 4K Contents to users. Users were watching 1080p content before tvOS 26. Users can not watch 1080p content anymore when they update to tvOS 26. We have not changed anything at HLS playlist side and application version. This problem only occurs on Apple TV 4th Gen (A1625) tvOS 26 version. There is no problem with newer Apple TV devices. Would you help to resolve problem? Thanks in advance

The operation couldn’t be completed. (CoreMediaErrorDomain error -19156 - The operation couldn’t be completed. (CoreMediaErrorDomain error -19156.

I've established proper authorization for general music api calls, but when I use that same authorization to retrieve metadata for the latest music feeds (see https://developer.apple.com/documentation/applemusicfeed/requesting-a-feed-export), I get a 401 Unauthorized error. As per the documentation, I'm simply issuing a GET against https://api.media.apple.com/v1/feed/album/latest. Are there different entitlements needed for the Music Feed API?

On an iPhone running iOS 26 beta 5, url(for: FilePath("subdir/asset.mov")) most always throws this error: The URL for “subdir/asset.mov” couldn’t be retrieved: “asset.mov” couldn’t be copied to “subdir” because an item with the same name already exists. Yet, contents(at: FilePath("subdir/asset.mov")) always returns Data for a playable AVMovie. How can I avoid this url(for:) error? The asset pack in question is downloaded. The error persists even after pack deletion, redownload, relaunch, and combinations of that. // Assets repo root subdir.aar subdir/asset.mov subdir/asset_thumb.heic subdir/Manifest.json // Manifest.json { "assetPackID": "subdir", "downloadPolicy": { "onDemand": {} }, "fileSelectors": [ { "directory": "subdir", }, ], "platforms": [ "iOS", "visionOS" ] } xcrun ba-package subdir/Manifest.json -o subdir.aar xcrun ba-serve --host 192.168.0.10 -p 443 subdir.aar

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

Starting in iOS 18.4, (and still in the iOS 18.5 beta), the AVPlayer seems to freeze when we: Replace the current AVPlayerItem, ReplaceCurrentItemWithPlayerItem and then: Call Seek very shortly afterwards (seekToTime:toleranceBefore:toleranceAfter: / seek(to:)) And then subsequent calls to play after have no effect. However, it feels scrubbing to see after works and also changing the playback rate (i.e. fast forward) tends to clear up the frozen state. Our primary workflow involves video playback, replacing video to show new clips and in some cases seeking to specific frames. This appears to only be occurring while streaming video, reports are all that local downloaded video playback remains fine. This same code path has worked without issue on 17.x and 18.3.2 and for years before that. What is particularly strange is that time observers log that video is still playing or feeding frames. The reported status is ReadyToPlay, IsLikelyToKeepUp is true, and there are no indications of stalling or buffering. A similar issue is true for our web application in Safari. While on Sonoma and Safari 17.x, there is no issue. When you update to macOS Sequoia 15.4.1 and Safari 18.4, you begin observing a similar freezing. The same does not occur on Chrome or other tested browsers. There appears to be in the release notes for Safari 18.4, an interesting "fix" note that seems similar to what we are now experiencing: https://developer.apple.com/documentation/safari-release-notes/safari-18_4-release-notes "Fixed an issue where playback doesn’t always resume after a seek. (140097993)" "Fixed playing video generating non-monotonic ‘timeupdate’ events. (142275184) (FB16222910)" "Fixed websites calling play() during a seek() is allowed by the specification so that the play event is fired even if the seek hasn’t completed. (142517488)" "Fixed seek not completing for WebM under some circumstances. (143372794)" "Fixed MediaRecorderPrivateEncoder writing frames out of order. (143956063)"