I'm experiencing an issue with my app when saving images to the camera roll. This is intermittent, but it happens several times a day. The error I receive is the following: Connection to assetsd was interrupted - assetsd exited, died, or closed the photo library Error getting remote object proxy for -[PLNonBindingAssetsdPhotoKitClient sendChangesRequest:reply:]_block_invoke: Error Domain=NSCocoaErrorDomain Code=4097 "connection to service named com.apple.photos.service" UserInfo={NSDebugDescription=connection to service named com.apple.photos.service} PhotoKit XPC proxy is invalid. Dropping request on the floor and returning an error: Error Domain=PHPhotosErrorDomain Code=3301 "(null)" (underlying error Error Domain=NSCocoaErrorDomain Code=4097 "connection to service named com.apple.photos.service" UserInfo={NSDebugDescription=connection to service named com.apple.photos.service}) CoreData: error: XPC: synchronousRemoteObjectProxyWithErrorHandler: store 'file:///var/mobile/Media/PhotoData/Photos.sqlite' encountered error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated: failed to check-in, peer may have been unloaded: mach_error=10000003." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated: failed to check-in, peer may have been unloaded: mach_error=10000003.} CoreData: error: XPC: synchronousRemoteObjectProxyWithErrorHandler: store 'file:///var/mobile/Media/PhotoData/Photos.sqlite' encountered error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated: failed to check-in, peer may have been unloaded: mach_error=10000003." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated: failed to check-in, peer may have been unloaded: mach_error=10000003.} My code is unchanged from using my app daily on an iPhone 16 Pro with iOS 26. I never saw the issue on this device. Here is an excerpt from my code for saving the image: var localIdentifier = String() PHPhotoLibrary.shared().performChanges({ let albumChangeRequest = PHAssetCollectionChangeRequest(for: album) let assetCreationRequest = PHAssetCreationRequest.forAsset() let options = PHAssetResourceCreationOptions() assetCreationRequest.addResource(with: .photo, data: imageData, options: options) assetCreationRequest.creationDate = Date.now let placeHolder = assetCreationRequest.placeholderForCreatedAsset albumChangeRequest?.addAssets([placeHolder!] as NSArray) if placeHolder != nil { localIdentifier = (placeHolder?.localIdentifier)! } }) { (didSucceed, error) in OperationQueue.main.addOperation({ didSucceed ? success(localIdentifier) : failure(error) }) } I'm not sure why this would be device specific but I have had users with iPhone 17 Pro and iPhone Air reporting the issue. Alex

I discovered when editing photos with the PhotoKit API, PHContentEditingOutput's renderedContentURL is a file in the app container's tmp directory with a filename that seems to follow the format render.<uuid>.JPG, and that file does not get deleted if the edit does not complete successfully (the user cancels the edit request, an error occurs, the app crashes, etc). I understand the system is supposed to automatically delete tmp files every once in a while, but some users are noticing my app's Documents & Data inflates, so I'm considering deleting these render files each time the app is launched. But I don't want to delete everything in the tmp directory as there could possibly be other data in there. What's the best way to remove those temporary files? Does the filename always start with render. no matter the device language? I thought I'd delete files in NSTemporaryDirectory() with that prefix but then I discovered in Mac Catalyst the location is not the tmp directory directly, they're in tmp/TemporaryItems/<bundleid>. Thanks!

Just downloaded iOS 26.1 and my phone keeps ringing after the call has been answered. Any fixes for this?

Device: iPhone 16 Pro Max OS: iOS 26.0.1 AVCaptureDevice.DeviceType: builtInUltraWideCamera avtiveFormat: <AVCaptureDeviceFormat: 0x10ffb9ac0 'vide'/'420v' 1440x1080, { 1- 60 fps}, photo dims:{1440x1080,2016x1512}, fov:101.022, gdc fov:103.625, binned, max zoom:94.50 (upscales @1.40), system zoom range:1.0-3.0, AF System:1, ISO:15.0-3600.0, SS:0.000023-1.000000, system exposure bias range:-2.0-2.0, supports multicam, supports CS RoI, supports Smart Style, supports Smudge Detection> API: device.isFocusModeSupported(.continuousAutoFocus) == true setting: device.focusMode = .continuousAutoFocus setting is ok, but it's not working actually with continuousAutoFocus

The iPhone 17’s front camera with the new 18MP square sensor and iOS 26’s Center Stage feature can auto-rotate between portrait and landscape like the native iOS Camera app. Is there a Swift or AVFoundation API that allows developers to manually control front camera orientation in the same way the native Camera app does? Or is this auto-rotation strictly handled by the system without public API access?

The introduction of PHBackgroundResourceUploadExtension is a welcome addition in iOS 26.1. I wonder however, how to attach a debugger and actually get the system to call the process() method of the extension. I tried to run the extension both inside photos app (and also the main app for testing), but when I take a photo or add photos to the library (saving), the process() method does never get called. Any hints would be appreciated to debug the PHBackgroundResourceUploadExtension during development.

Hi, I’m trying to implement the new PhotoKit PHBackgroundResourceUploadExtension. I created the extension, enabled full photo library access in the host app, and registered the extension point using the string: com.apple.photos.background-upload. However, when I attempted to enable the extension with: try library.setUploadJobExtensionEnabled(true) I received the following error: Error Domain=PHPhotosErrorDomain Code=-1 "(null)" This happens when running the app on Xcode 26.1 and 26.2 Beta, using the iPhone 17 Pro Max simulator (iOS 26.1 and 26.2). My question is: Is this extension supported on the simulator? I’m asking because at the moment it’s difficult for me to test this on a physical device. Also, What's the meaning of the error? Thanks.

Hello, We are trying to use the new Background Upload Extension to improve uploads of assets (Photos, Live Photos, Videos) in the background in our application. 1-The assets have finished uploading, but I'm unable to retrieve successful records using PHAssetResourceUploadJob.fetchJobs(action: .acknowledge, options: nil). When will the successful records be returned? 2-How to retrieve the system's pending tasks ? We want to cancel tasks handed over to the system when returning to the main app to avoid duplicate resource uploads. 3-When we set UploadJobExtensionEnabled = true, will tasks handed over to the system still execute after returning to the main app? Do we need to set UploadJobExtensionEnabled = false upon returning to the main app? If we set UploadJobExtensionEnabled = false, will previously submitted upload tasks be cleared?

Hello, We are trying to use the new Background Upload Extension to improve uploads of assets (Photos, Live Photos, Videos) in the background in our application. 1-The assets have finished uploading, but I'm unable to retrieve successful records using PHAssetResourceUploadJob.fetchJobs(action: .acknowledge, options: nil). When will the successful records be returned? 2-How to retrieve the system's pending tasks? We want to cancel tasks handed over to the system when returning to the main app to avoid duplicate resource uploads. 3-When we set UploadJobExtensionEnabled = true, will tasks handed over to the system still execute after returning to the main app? Do we need to set UploadJobExtensionEnabled = false upon returning to the main app? If we set UploadJobExtensionEnabled = false, will previously submitted upload tasks be cleared?

I am developing an iOS camera app that can record video directly to external storage connected to an iPhone. To detect whether an external USB storage device is connected and to obtain its URL, I am considering using AVExternalStorageDeviceDiscoverySession. However, when checking support using AVExternalStorageDeviceDiscoverySession.isSupported, I observe that it returns true only on Pro model iPhones, and false on non-Pro models in my environment. I have reviewed Apple’s official documentation, but I could not find any clear description of the supported devices or requirements (for example, whether this API is limited to Pro models or requires specific hardware capabilities). I would appreciate any information regarding the following points: ●The actual requirements for AVExternalStorageDeviceDiscoverySession to be supported Device limitations (Pro vs non-Pro models) Hardware requirements (USB controller, external recording capability, etc.) iOS version dependencies ●Whether support for non-Pro models is planned in the future Tested environments iPhone 16 Pro (iOS 18.7.1) → isSupported == true iPhone 16e (iOS 26.2) → isSupported == false iPhone 17 (iOS 26.2) → isSupported == false iPhone Air (iOS 26.2) → isSupported == false If anyone has observed similar behavior or has official information from Apple regarding this API, I would greatly appreciate your insights.

I am developing an iOS camera app that can record video directly to external storage connected to an iPhone. To detect whether an external USB storage device is connected and to obtain its URL, I am considering using AVExternalStorageDeviceDiscoverySession. However, when checking support using AVExternalStorageDeviceDiscoverySession.isSupported, I observe that it returns true only on Pro model iPhones, and false on non-Pro models in my environment. I have reviewed Apple’s official documentation, but I could not find any clear description of the supported devices or requirements (for example, whether this API is limited to Pro models or requires specific hardware capabilities). I would appreciate any information regarding the following points: ①The actual requirements for AVExternalStorageDeviceDiscoverySession to be supported Device limitations (Pro vs non-Pro models) Hardware requirements (USB controller, external recording capability, etc.) iOS version dependencies ②Whether support for non-Pro models is planned in the future Tested environments iPhone 16 Pro (iOS 18.7.1) → isSupported == true iPhone 16e (iOS 26.2) → isSupported == false iPhone 17 (iOS 26.2) → isSupported == false iPhone Air (iOS 26.2) → isSupported == false If anyone has observed similar behavior or has official information from Apple regarding this API, I would greatly appreciate your insights.

Hi everyone, I’m seeing recurring internal AVFoundation camera logs on iOS 26.2 and I’m trying to understand whether this is expected behavior or a regression in the capture pipeline. These logs appear shortly after starting an AVCaptureSession, while video frames are being delivered, and also when the camera is stopped or the capture session is torn down. <<<< FigXPCUtilities >>>> signalled err=-17281 at <>:302 <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:569) - (err=-17281) Even in this clean, minimal setup, the same logs appear on iOS 26.2 The exact same logic did not produce these logs on iOS 18.x. To rule out issues caused by my own code, GPT created a minimal SwiftUI example from scratch. My primary interest is to perform real-time processing on the video frames delivered by the camera (via AVCaptureVideoDataOutput), for tasks such as analysis, computer vision, or custom frame handling, while simultaneously displaying the live preview. Thanks in advance for any insight. Example Code

I'm adopting Liquid Glass in iOS 26, when I try to test VNDocumentCameraViewController with document scanning after Liquid Glass enabled, there's a crash just after a photo is taken in VNDocumentCameraViewController, here's the screenshot when it crashed The exception output in XCode console is this: *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Layout requested for visible navigation bar, <UINavigationBar: 0x1240bde00; frame = (0 117; 390 54); opaque = NO; tintColor = UIExtendedSRGBColorSpace 1 1 0 1; layer = <CALayer: 0x120c21e60>> standardAppearance=0x12407b900 scrollEdgeAppearance=0x12407bb80 compactAppearance=0x12407b880 no-scroll-edge-support, when the top item belongs to a different navigation bar. topItem = <UINavigationItem: 0x1240bd800> style=navigator leftBarButtonItems=0x123d4e5f0 rightBarButtonItems=0x123d4d5a0, navigation bar = <UINavigationBar: 0x107b9ad00; frame = (0 47; 390 54); opaque = NO; autoresize = W; tintColor = UIExtendedSRGBColorSpace 1 1 0 1; layer = <CALayer: 0x120c20150>> delegate=0x10a805200 standardAppearance=0x107b2c300 scrollEdgeAppearance=0x107b2c280 compactAppearance=0x107b2c100, possibly from a client attempt to nest wrapped navigation controllers.' *** First throw call stack: (0x18e1db994 0x18b0f5814 0x18c092aa0 0x193b18660 0x193a7d540 0x193a7e020 0x1953ec4a0 0x1943b7d78 0x18ed83420 0x18ed82f74 0x18eb83134 0x18eb44c10 0x18eb70bc4 0x18eb7e74c 0x193ac8cd0 0x193ac8c04 0x193ad6afc 0x193ad5f8c 0x27b456560 0x18e12c4cc 0x18e15c0b0 0x18e15bfd8 0x18e133c1c 0x18e132a6c 0x22ed54498 0x193af6ba4 0x193a9fa78 0x193bcb68c 0x102cc2718 0x102cc2688 0x102cc2794 0x18b14ae28) libc++abi: terminating due to uncaught exception of type NSException

Opening this question after discussing the issue in the AVCapture lab, hopefully so we can track down this issue. We've been noticing some crashes in App Store Connect caused by layoutSublayers being called on a background thread. After debugging the issue a bit we found that all calls which modified the AVCaptureSession or preview layer were indeed done on the main thread. It would be useful to see what results in AVCaptureVideoPreviewLayer.updateFormatDescription being called. I've attached the crashlog below. Crash log.ips - https://developer.apple.com/forums/content/attachment/800b0dba-3477-4c5a-b56c-f4cc393b384f

I'm developing iPad app that will be mostly dedicated for certain external camera for visually impaired people. The linux UVC api (e.g. using guvcview) allows to enable automatic exposure for the camera. IOs api "isExposureModeSupported" unfortunately returns false for any of the exposure modes. Is it a bug? Or perhaps AVFoundation doesn't support UVC exposure yet?

I am working on an iOS application using SwiftUI where I want to convert a JPG and a MOV file to a live photo. I am utilizing the LivePhoto Class from Github for this. The JPG and MOV files are displayed correctly in my WallpaperDetailView, but I am facing issues when trying to download the live photo to the gallery and generate the Live Photo. Here is the relevant code and the errors I am encountering: Console prints: Play button should be visible Image URL fetched and set: Optional("https://firebasestorage.googleapis.com/...") Video is ready to play Video downloaded to: file:///var/mobile/Containers/Data/Application/.../tmp/CFNetworkDownload_7rW5ny.tmp Failed to generate Live Photo I have verified that the app has the necessary permissions to access the Photo Library. The JPEG and MOV files are successfully downloaded and can be displayed in the app. The issue seems to occur when generating the Live Photo from the downloaded files. struct WallpaperDetailView: View { var wallpaper: Wallpaper @State private var isLoading = false @State private var isImageSaved = false @State private var imageURL: URL? @State private var livePhotoVideoURL: URL? @State private var player: AVPlayer? @State private var playerViewController: AVPlayerViewController? @State private var isVideoReady = false @State private var showBuffering = false var body: some View { ZStack { if let imageURL = imageURL { GeometryReader { geometry in KFImage(imageURL) .resizable() ... } } if let playerViewController = playerViewController { VideoPlayerViewController(playerViewController: playerViewController) .frame(maxWidth: .infinity, maxHeight: .infinity) .clipped() .edgesIgnoringSafeArea(.all) } } .onAppear { PHPhotoLibrary.requestAuthorization { status in if status == .authorized { loadImage() } else { print("User denied access to photo library") } } } private func loadImage() { isLoading = true if let imageURLString = wallpaper.imageURL, let imageURL = URL(string: imageURLString) { self.imageURL = imageURL if imageURL.scheme == "file" { self.isLoading = false print("Local image URL set: \(imageURL)") } else { fetchDownloadURL(from: imageURLString) { url in self.imageURL = url self.isLoading = false print("Image URL fetched and set: \(String(describing: url))") } } } if let livePhotoVideoURLString = wallpaper.livePhotoVideoURL, let livePhotoVideoURL = URL(string: livePhotoVideoURLString) { self.livePhotoVideoURL = livePhotoVideoURL preloadAndPlayVideo(from: livePhotoVideoURL) } else { self.isLoading = false print("No valid image or video URL") } } private func preloadAndPlayVideo(from url: URL) { self.player = AVPlayer(url: url) let playerViewController = AVPlayerViewController() playerViewController.player = self.player self.playerViewController = playerViewController let playerItem = AVPlayerItem(url: url) playerItem.preferredForwardBufferDuration = 1.0 self.player?.replaceCurrentItem(with: playerItem) ... print("Live Photo Video URL set: \(url)") } private func saveWallpaperToPhotos() { if let imageURL = imageURL, let livePhotoVideoURL = livePhotoVideoURL { saveLivePhotoToPhotos(imageURL: imageURL, videoURL: livePhotoVideoURL) } else if let imageURL = imageURL { saveImageToPhotos(url: imageURL) } } private func saveImageToPhotos(url: URL) { ... } private func saveLivePhotoToPhotos(imageURL: URL, videoURL: URL) { isLoading = true downloadVideo(from: videoURL) { localVideoURL in guard let localVideoURL = localVideoURL else { print("Failed to download video for Live Photo") DispatchQueue.main.async { self.isLoading = false } return } print("Video downloaded to: \(localVideoURL)") self.generateAndSaveLivePhoto(imageURL: imageURL, videoURL: localVideoURL) } } private func generateAndSaveLivePhoto(imageURL: URL, videoURL: URL) { LivePhoto.generate(from: imageURL, videoURL: videoURL, progress: { percent in print("Progress: \(percent)") }, completion: { livePhoto, resources in guard let resources = resources else { print("Failed to generate Live Photo") DispatchQueue.main.async { self.isLoading = false } return } print("Live Photo generated with resources: \(resources)") self.saveLivePhotoToLibrary(resources: resources) }) } private func saveLivePhotoToLibrary(resources: LivePhoto.LivePhotoResources) { LivePhoto.saveToLibrary(resources) { success in DispatchQueue.main.async { if success { self.isImageSaved = true print("Live Photo saved successfully") } else { print("Failed to save Live Photo") } self.isLoading = false } } } private func fetchDownloadURL(from gsURL: String, completion: @escaping (URL?) -> Void) { let storageRef = Storage.storage().reference(forURL: gsURL) storageRef.downloadURL { url, error in if let error = error { print("Failed to fetch image URL: \(error)") completion(nil) } else { completion(url) } } } private func downloadVideo(from url: URL, completion: @escaping (URL?) -> Void) { let task = URLSession.shared.downloadTask(with: url) { localURL, response, error in guard let localURL = localURL, error == nil else { print("Failed to download video: \(String(describing: error))") completion(nil) return } completion(localURL) } task.resume() } }```

When trying to edit some Live Photos, calling PHLivePhotoEditingContext.saveLivePhoto results in the following error: Error Domain=AVFoundationErrorDomain Code=-11800 "The operation could not be completed" UserInfo={NSLocalizedFailureReason=An unknown error occurred (-12815), NSLocalizedDescription=The operation could not be completed, NSUnderlyingError=0x300d05380 {Error Domain=NSOSStatusErrorDomain Code=-12815 "(null)"}} I was able to replicate it on my device by taking a new Live Photo. Not sure what's wrong with that one specifically, not all Live Photos replicate the issue. I've submitted FB15880825 with a sysdiagnose and a Photos Diagnostics as well. Any ideas what's going on here? It's impacting multiple customers. Thanks!

Hey, I have a complex CIFilter chain I'm trying to debug to improve processing time. Is there any documentation on what all the colours mean and the naming, e.g. sRGB Linear_to_workspace? Thanks Alex

Hello everyone, I need some help about this things. If you also know, pls comment. Overview We are planning to develop an app using the “Support external cameras in your iPadOS app” feature introduced in iPadOS 17. Before implementing this feature, it is necessary for the iPad to recognize external cameras. However, among the iPad models compatible with iPadOS 17, we have found that some of the iPads owned by our development team can recognize external cameras, while others cannot. If you have any reports regarding compatibility issues or information on how to resolve these problems, please share them with us. Detailed Explanation: The results of our investigation are as follows: External Camera Used: A 360-degree camera Devices Firmware RICOH Theta X 2.61.0（2024/12/26Latest） RICOH Theta Z1 Tested iPad Devices Firmware Status 12.9インチiPad Pro（第3世代） IOS 17.5.1 OK 11インチiPad Pro（M4） IOS 18.2 NG Verification Method Step 1: Power on the iPad and the external camera, ensuring both are ready for connection. Step 2: Connect the iPad and the external camera using a USB-C cable. Step 3: Launch FaceTime on the iPad and check the displayed camera feed. If the external camera is recognized, the feed from the external camera will be displayed.

Our app filters the photo library to a certain date range for ease of picking photos. However, to do this, we have to require full permissions to the photo library. We would like to use the PHPickerViewController and have it filter the results by the assets creation date? This would allow us to use it. I see other filter options, but not this one. And if it isn't there, is this something that is being thought about or on a roadmap?