Hey everyone, I'm encountering an issue with audio sample rate conversion that I'm hoping someone can help with. Here's the breakdown: Issue Description: I've installed a tap on an input device to convert audio to an optimal sample rate. There's a converter node added on top of this setup. The problem arises when joining Zoom or FaceTime calls—the converter gets deallocated from memory, causing the program to crash. Symptoms: The converter node is being deallocated during video calls. The program crashes entirely when this happens. Traditional methods of monitoring sample rate changes (tracking nominal or actual sample rates) aren't working as expected. The Big Challenge: I can't figure out how to properly monitor sample rate changes. Listeners set up to track these changes don't trigger when the device joins a Zoom or FaceTime call. Please, if anyone has experience with this or knows a solution, I'd really appreciate your help. Thanks in advance! ⁠

My app encountered problems when trying to open an x86 audioUnit v2 on a Silicon Mac (although Rosetta is installed). There seems to be a XPC connection issue with the AUHostingService that I don't know how to fix. I observed other host apps opening the same plugins without problem, so there is probably something wrong or incompatible in my codes. I noticed that: The issue occurs whether or not the app is sandboxed. The issue does no longer occur when the app itself runs under Rosetta. There is no error reported by CoreAudio during allocation and initialization of the audio unit. The first notified errors appears when the unit calls AudioUnitRender from the rendering callback. With most x86 plugins, the error is on first call: kAudioUnitErr_RenderTimeout and on any subsequent call: kAudioComponentErr_InstanceInvalidated On the UI side, when the Cocoa View is loaded, it appears shortly, then disappears immediately leaving its superview empty. With another x86 plugin, the Cocoa View is loaded normally, but CoreAudio still emits kAudioUnitErr_NoConnection from AudioUnitRender, whether the view has been loaded or not, and the plugin produces no sound. I also find these messages in the console (printed in that order): CLIENT ERROR: RemoteAUv2ViewController does not override - and thus cannot react to catastrophic errors beyond logging them AUAudioUnit_XPC.mm:641 Crashed AU possible component description: aumu/Helm/Tyte My app uses the AUv2 API and I suspect that working with the AUv3 API would spare me these problems. However, considering how my audio system is built (audio units are wrapped into C++ classes and most connections between units are managed on the fly from the rendering callback), it would be a lot of work to convert, and I’m even not sure that all I do with the AUv2 API would be possible with the AUv3 API. I could possibly find an intermediate solution, but in the immediate future I'm looking for the simplest and fastest possible fix. If I cannot find better, I see two fallback options: In this part of the doc: “Beginning with macOS 11, the system loads audio units into a separate process that depends on the architecture or host preference”, does “host preference” means that it would be possible to disable the “out of process” behavior, for example from the app entitlements or info.plist? Otherwise, as a last resort, I could completely disable the use of x86 audioUnits when my app runs under ARM64, for at least making things cleaner. But the Audio Component API doesn’t give any info about the plugin architecture, how could I found it? Any tip or idea about this issue will be much appreciated. Thanks in advance!

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: <dict> <key>com.apple.security.application-groups</key> <array> <string>group.com.<company>.<appname></string> </array> </dict>

I am work an app development on an app which request an audio function in background as an alert sound. during debug testing , the function work fine, but once I testing standalone without debugging , The function not work , it will play out the sound when I back to app. does any way to trace the issues ?

Overview We are producing audio in real time from an editing application and are trying to put that on an HLS stream. We attempt to submit PCM samples through an audio writer but are getting a crash after a select number of samples have been appended. Depending on the number of audio frames in the PCM buffer, we might get more iterations before the crash but it always has the same traceback (see below). Code The setup is rather simple. We took inspiration from a few sources around the web. NSMutableDictionary *audio = [[NSMutableDictionary alloc] init]; [audio setObject:@(kAudioFormatMPEG4AAC) forKey:AVFormatIDKey]; [audio setObject:[NSNumber numberWithInt:config.audioSampleRate] // 48000 forKey:AVSampleRateKey]; [audio setObject:[NSNumber numberWithInt:config.audioChannels] // 2 forKey:AVNumberOfChannelsKey]; [audio setObject:@160000 forKey:AVEncoderBitRateKey]; m_audioConfig = [[NSDictionary alloc] initWithDictionary:audio]; m_audio = [[AVAssetWriterInput alloc] initWithMediaType:AVMediaTypeAudio outputSettings:m_audioConfig]; AVAudioFrameCount audioFrames = BUFFER_SAMPLES * bCount; AVAudioPCMBuffer *pcmBuffer = [[AVAudioPCMBuffer alloc] initWithPCMFormat:m_full.pcmFormat frameCapacity:audioFrames]; pcmBuffer.frameLength = pcmBuffer.frameCapacity; AudioChannelLayout layout; memset(&layout, 0, sizeof(layout)); layout.mChannelLayoutTag = kAudioChannelLayoutTag_Stereo; CMFormatDescriptionRef format; OSStatus stats = CMAudioFormatDescriptionCreate( kCFAllocatorDefault, pcmBuffer.format.streamDescription, sizeof(layout), &layout, 0, nil, nil, &format ); for (int i = 0; i < bCount; i++) { AudioPCM pcm; audioCallback->callback(pcm); memcpy(*(pcmBuffer.int16ChannelData) + (bufferSize * i), pcm.data, bufferSize); } size_t samplesConsumed = BUFFER_SAMPLES * bCount; CMSampleBufferRef sampleBuffer; CMSampleTimingInfo timing; timing.duration = CMTimeMake(1, config.audioSampleRate); timing.presentationTimeStamp = presentationTime; timing.decodeTimeStamp = kCMTimeInvalid; OSStatus ostatus = CMSampleBufferCreate( kCFAllocatorDefault, nil, false, nil, nil, format, (CMItemCount)pcmBuffer.frameLength, 1, &timing, 0, nil, &sampleBuffer ); //// ostatus = CMSampleBufferSetDataBufferFromAudioBufferList( sampleBuffer, kCFAllocatorDefault, kCFAllocatorDefault, kCMSampleBufferFlag_AudioBufferList_Assure16ByteAlignment, pcmBuffer.audioBufferList ); if (ostatus != noErr) { NSLog(@"fill audio sample from buffer list failed: %s", logAudioError(ostatus)); return; } ostatus = CMSampleBufferSetDataReady(sampleBuffer); if (ostatus != noErr) { NSLog(@"set sample buffer ready failed: %s", logAudioError(ostatus)); return; } // Finally we can attach it, then shove the presentation time forward [m_audio appendSampleBuffer:sampleBuffer]; The Crash The crash points towards some level of deallocation when the conversion tooling is done or has enough samples to process an output packet? It's had to say. 0 caulk 0x1a1e9532c caulk::alloc::tiered_allocator<caulk::alloc::size_range_tier<0ul, 1008ul, caulk::alloc::tree_allocator<caulk::alloc::chunk_allocator<caulk::alloc::page_allocator, caulk::alloc::bitmap_allocator, caulk::alloc::embed_block_memory, 16384ul, 16ul, 6ul>>>, caulk::alloc::size_range_tier<1009ul, 256000ul, caulk::alloc::guarded_edges_allocator<caulk::alloc::consolidating_free_map<caulk::alloc::page_allocator, 10485760ul>, 4ul>>, caulk::alloc::tracking_allocator<caulk::alloc::page_allocator>>::deallocate(caulk::alloc::block, unsigned long) + 636 1 AudioToolboxCore 0x1993fbfe4 ExtendedAudioBufferList_Destroy + 112 2 AudioToolboxCore 0x1993d5fe0 std::__1::__optional_destruct_base<ACCodecOutputBuffer, false>::~__optional_destruct_base[abi:ne180100]() + 68 3 AudioToolboxCore 0x1993d5f48 acv2::CodecConverter::~CodecConverter() + 196 4 AudioToolboxCore 0x1993d5e5c acv2::CodecConverter::~CodecConverter() + 16 5 AudioToolboxCore 0x1992574d8 std::__1::vector<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>, std::__1::allocator<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>>>::__clear[abi:ne180100]() + 84 6 AudioToolboxCore 0x199259acc acv2::AudioConverterChain::RebuildConverterChain(acv2::ChainBuildSettings const&) + 116 7 AudioToolboxCore 0x1992596ec acv2::AudioConverterChain::SetProperty(unsigned int, unsigned int, void const*) + 1808 8 AudioToolboxCore 0x199324acc acv2::AudioConverterV2::setProperty(unsigned int, unsigned int, void const*) + 84 9 AudioToolboxCore 0x199327f08 with_resolved(OpaqueAudioConverter*, caulk::function_ref<int (AudioConverterAPI*)>) + 60 10 AudioToolboxCore 0x1993281e4 AudioConverterSetProperty + 72 11 MediaToolbox 0x1a7566c2c FigSampleBufferProcessorCreateWithAudioCompression + 2296 12 MediaToolbox 0x1a754db08 0x1a70b5000 + 4819720 13 MediaToolbox 0x1a754dab4 FigMediaProcessorCreateForAudioCompressionWithFormatWriter + 100 14 MediaToolbox 0x1a77ebb98 0x1a70b5000 + 7564184 15 MediaToolbox 0x1a7804158 0x1a70b5000 + 7663960 16 MediaToolbox 0x1a7801da0 0x1a70b5000 + 7654816 17 AVFCore 0x1ada530c4 -[AVFigAssetWriterTrack addSampleBuffer:error:] + 192 18 AVFCore 0x1ada55164 -[AVFigAssetWriterAudioTrack _flushPendingSampleBuffersReturningError:] + 500 19 AVFCore 0x1ada55354 -[AVFigAssetWriterAudioTrack addSampleBuffer:error:] + 472 20 AVFCore 0x1ada4ebf0 -[AVAssetWriterInputWritingHelper appendSampleBuffer:error:] + 128 21 AVFCore 0x1ada4c354 -[AVAssetWriterInput appendSampleBuffer:] + 168 22 lib_devapple_hls.dylib 0x115d2c7cc detail::AppleHLSImplementation::audioRuntime() + 1052 23 lib_devapple_hls.dylib 0x115d2d094 void* std::__1::__thread_proxy[abi:ne180100]<std::__1::tuple<std::__1::unique_ptr<std::__1::__thread_struct, std::__1::default_delete<std::__1::__thread_struct>>, void (detail::AppleHLSImplementation::*)(), detail::AppleHLSImplementation*>>(void*) + 72 24 libsystem_pthread.dylib 0x196e5b2e4 _pthread_start + 136 Any insight would be welcome!

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

I’m seeing what appears to be an iOS audio-session issue that occurs only when a phone call happens while the app is in the background. API: AVAudioSession, AVAudioRecorder Background Modes: Audio enabled (UIBackgroundModes = audio) Category: .playAndRecord Microphone permission: granted Expected Behavior If the app is recording audio in the background and a phone call interrupts it: AVAudioSession.interruptionNotification(.began) fires Call ends AVAudioSession.interruptionNotification(.ended) fires App should be able to re-activate its audio session and resume or restart recording Apple documentation suggests this should be supported for background audio apps. Actual Behavior When the app is in the background and phone call is ended: AVAudioSession.interruptionNotification(.ended) does fire Attempting to reactivate the audio session always fails: Error Domain=NSOSStatusErrorDomain Code=560557684 ("!int") "Session activation failed" The session appears to remain permanently “interrupted” Retrying activation (with delays) does not help Recreating AVAudioRecorder does not help Reactivation works only after the app is opened again

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.

Hi all, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this?

Two issues: No matter what I set in try audioSession.setPreferredSampleRate(x) the sample rate on both iOS and macOS is always 48000 when the output goes through the speaker, and 24000 when my Airpods connect to an iPhone/iPad. Now, I'm checking the current output loudness to animate a 3D character, using mixerNode.installTap(onBus: 0, bufferSize: y, format: nil) { [weak self] buffer, time in Task { @MainActor in // calculate rms and animate character accordingly but any buffer size under 4800 is just ignored and the buffers I get are 4800 sized. This is ok, when the sampleRate is currently 48000, as 10 samples per second lead to decent visual results. But when AirPods connect, the samplerate is 24000, which means only 5 samples per second, so the character animation looks lame. My AVAudioEngine setup is the following: audioEngine.connect(playerNode, to: pitchShiftEffect, format: format) audioEngine.connect(pitchShiftEffect, to: mixerNode, format: format) audioEngine.connect(mixerNode, to: audioEngine.outputNode, format: nil) Now, I'd be fine if the outputNode runs at whatever if it needs, as long as my tap would get at least 10 samples per second. PS: Specifying my favorite format in the let format = AVAudioFormat(standardFormatWithSampleRate: 48_000, channels: 2)! mixerNode.installTap(onBus: 0, bufferSize: y, format: format) doesn't change anything either

Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?

Hi there, I recently launched a dj app to the mac app store, and was wondering how I could access songs for mixing purposes via Apple Music just like how serato, rekordbox, djay, and other DJ apps do? Thanks, Gunek

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

I’m building a teleprompter-style app that relies on Picture in Picture. PiP starts correctly on device. Everything works — until another app (e.g. TikTok / Instagram) starts active video recording. When camera capture begins in the foreground app, iOS terminates my PiP session. Some teleprompter apps appear to keep PiP active while recording in other apps, so I’m trying to understand the recommended architectural pattern for this scenario. Is there a documented approach or best practice to keep PiP stable during third-party camera capture? Looking specifically for guidance on the correct AVKit / AVAudioSession configuration for this use case.

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

My app uses the AVFoundation to pronounce some words. Running the app from Xcode, either to a simulator or device, I frequently get this crash at start-up: AXSpeech (13): EXC_BAD_ACCESS (code=EXC_I386_GPFLT). It seems to occur randomly, maybe 20%-30% of the time I launch the app. When it does not crash, using audio works as expected. When launched from the device, it never crashes (so far, at least). Here's the code that outputs speech: Declared at the top level of the View struct: @State var synth = AVSpeechSynthesizer() In the View, as part of a Button's action closure: let utterance = AVSpeechUtterance(string: answer) utterance.voice = AVSpeechSynthesisVoice(language: "en_US") synth.speak(utterance) Any idea on how to stop this? It's annoying having to launch the app multiple times to test on a simulator or device.

New to iOS development and I've been trying to make heads or tails of the documentation. I know there is a difference between the data fields returned from songs from the user library and from the category, but whenever I search on the apple site I can't find a list of each. For example, Im trying to get the releaseDate of a song in my library, but it seems I'll have to cross-query either the catalog entry for the using song.catalogID or the song.irsc but when I try to use them I can't find a cross reference between the two. I'm totally turned around. Also trying to determine if a song in my library has been favorited or not? isFavorited (or something similar) doesn't seem to be a thing. Using this code and trying to find a way to display a solid star if the song has been favorited or an empty one if it's not. Seems like a basic request but I can't find anything on how to do it. I've searched docs, googled, tried. Does apple want us to query the user's Favorited Songs playlist or something? How do I know which playlist that is? I know isFavorited isn't a thing, just using it here so you can see what my intension is: HStack(spacing: 10) { Image(systemName: song.isFavorited ? "star.fill" : "star") .foregroundColor(song.isFavorited ? .yellow : .gray) Image(systemName: "magnifyingglass") }

I need to apply headphone-specific scenario only when headphones are the sole active playback device in my iOS audio app. Problem that there is no absolute way to definitively understand that headphones are the sole active playback device AVAudioSession.currentRoute.outputs portTypes don't guarantee headphones: let session = AVAudioSession.sharedInstance() let outputs = session.currentRoute.outputs let headphonesOnly = outputs.count == 1 && (outputs.first?.portType == .headphones || outputs.first?.portType == .bluetoothA2DP || outputs.first?.portType == .bluetoothHFP || outputs.first?.portType == .bluetoothLE) The issue in code above that listed bluetooth profiles (A2DP, HFP, LE) can be used by any audio device, not only headphones Is there any public API on iOS that can: Distinguish Bluetooth headphones vs Bluetooth speakers when both use A2DP/LE? Expose the user’s “Device Type” classification (headphones / speaker / car stereo, etc.) that is shown in Settings → Bluetooth → Device Type? Provide a more reliable way to know “this route is definitely headphones” for A2DP devices, beyond portType and portName string heuristics?

I’m running the iOS 26.2 Public Beta update and my album artwork is missing from the music app (I’m not using Apple Music). I use google to get my album artwork. Do I need to wait for a new update?