My audio app shows a control bar at the bottom of the window. The controls show nicely, but there is a black "slab" appearing behind the inline controls, the same size as the playerView. Setting the player view background color does nothing: playerView.wantsLayer = true playerView.layer?.backgroundColor = NSColor.clear.cgColor How can I clear the background? If I use .floating controlsStyle, I don't get the background "slab".

Hi team, With regards to Call (Live) Translations on VOIP: Is it possible to invoke live translations within the app? (without going into the Call System UI) Is it possible to navigate users from app to Call System UI via an API? (and also invoking the new live translations directly) Will Apple support more languages apart from the current ones? (Currently I see 4 supported languages)

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

Since iOS 18, the system setting “Allow Audio Playback” (enabled by default) allows third-party app audio to continue playing while the user is recording video with the Camera app. This has created a problem for the app I’m developing. ➡️ The problem: My app plays continuous audio in both foreground and background states. If the user starts recording video using the iOS Camera app, the app’s audio — still playing in the background — gets captured in the video — obviously an unintended behavior. Yes, the user could stop the app manually before starting the video recording, but that can’t be guaranteed. As a developer, I need a way to stop the app’s audio before the video recording begins. So far, I haven’t found a reliable way to detect when video recording starts if ‘Allow Audio Playback’ is ON. ➡️ What I’ve tried: — AVAudioSession.interruptionNotification → doesn’t fire — devicesChangedEventStream → not triggered I don’t want to request mic permission (app doesn’t use mic). also, disabling the app from playing audio in the background isn’t an option as it is a crucial part of the user experience ➡️ What I need: A reliable, supported way to detect when the Camera app begins video recording, without requiring mic access — so I can stop audio and avoid unintentional overlap with the user’s recordings. Any official guidance, workarounds, or AVFoundation techniques would be greatly appreciated. Thanks.

My app Balletrax is a music player for people to use while they teach ballet. Used to be you could silence notifications during use, but now the customer seems to have to know how to use Focus mode, remember to turn it on and off, and have to check the notifications one does and doesn't want to use. Is there no way to silence all notifications when the app is in use?

I have an iPadOS M-processor application with two different running configurations. In config1, the shared AVAudioSession is configured for .videoChat mode using the built-in microphone. The input/output nodes of the AVAudioEngine are configured with voice processing enabled. The built-in mic is formatted for 1 channel at 48KHz. In config2, the shared AVAudioSession is configured for .measurement mode using an external USB microphone. The input/output nodes of the AVAudioEngine are configured with voice processing disabled. The external mic is formatted for 2 channels at 44.1KHz I've written a configuration manager designed to safely switch between these two configurations. It works by stopping AVAudioEngine and detaching all but the input and output nodes, updating the shared audio session for the desired mic and sample-rates, and setting the appropriate state for voice processing to either true or false as required by the configuration. Finally the new audio graph is constructed by attaching appropriate nodes, connecting them, and re-starting AVAudioEngine I'm experiencing what I believe is a race-condition between switching voice processing on or off and then trying to re-build and start the new audio graph. Even though notifications, which are dumped to the console indicate that my requested input and sample-rate settings are in place, I crash when trying to start the audio engine because the sample-rate is wrong. Investigating further it looks like the switch from remote I/O to voice-processing I/O or vice-versa has not yet actually completed. I introduced a 100ms second delay and that seems to help but is obviously not a reliable way to build software that must work consistently. How can I make sure that what are apparently asynchronous configuration changes to the shared audio session and the input/output nodes have completed before I go on? I tried using route change notifications from the shared AVAudioSession but these lie. They say my preferred mic input and sample-rate setting is in place but when I dump the AVAudioEngine graph to the debugger console, I still see the wrong sample rate assigned to the input/output nodes. Also these are the wrong AU nodes. That is, VPIO is still in place when RIO should be, or vice-versa. How can I make the switch reliable without arbitrary time delays? Is my configuration manager approach appropriate (question for Apple engineers)?

Hello there! Is there any list of voices that are always available on iOS/iPadOS devices? It seems that AVSpeechSynthesisVoice(identifier: "com.apple.voice.compact.en-US.Samantha") is always available on all devices. I thought that AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Nicky_en-US_compact") and AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Aaron_en-US_compact") were available by default on certain newer devices. Is this true? I also noticed that on the same iPad where I was using those 2 voices (Nicky and Aaron) - when I updated to the iPadOS 26 beta, those voices were no longer available. Any information you can share about which voices should be reliably available on which devices would be extremely helpful for our development. Thanks so much!

Hi everyone 👋 I’m building an iOS app in Swift where I want to do the following: Record the user’s voice Transcribe the spoken sentence (speech-to-text) Auto-detect the spoken language Translate it to another language selected by the user (e.g., English → Spanish or Hindi → English) Speak back (text-to-speech) the translated text on the same device Is this possible to record via phone mic and play the transcribe voice into headphone's audio?

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

Hello, I'm observing an intermittent memory leak being reported in the iOS Simulator when initializing and starting an AVAudioEngine. Even with minimal setup—just attaching a single AVAudioPlayerNode and connecting it to the mainMixerNode—Xcode's memory diagnostics and Instruments sometimes flag a leak. Here is a simplified version of the code I'm using: // This function is called when the user taps a button in the view controller: #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; } - (IBAction)myButtonAction:(id)sender { NSLog(@"Test"); soundCreate(); } @end // media.m static AVAudioEngine *audioEngine = nil; void soundCreate(void) { if (audioEngine != nil) return; [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryAmbient error:nil]; [[AVAudioSession sharedInstance] setActive:YES error:nil]; audioEngine = [[AVAudioEngine alloc] init]; AVAudioPlayerNode* playerNode = [[AVAudioPlayerNode alloc] init]; [audioEngine attachNode:playerNode]; [audioEngine connect:playerNode to:(AVAudioNode *)[audioEngine mainMixerNode] format:nil]; [audioEngine startAndReturnError:nil]; } In the memory leak report, the following call stack is repeated, seemingly in a loop: ListenerMap::InsertEvent(XAudioUnitEvent const&, ListenerBinding*) AudioToolboxCore ListenerMap::AddParameter(AUListener*, void*, XAudioUnitEvent const&) AudioToolboxCore AUListenerAddParameter AudioToolboxCore addOrRemoveParameterListeners(OpaqueAudioComponentInstance*, AUListenerBase*, AUParameterTree*, bool) AudioToolboxCore 0x180178ddf

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

I am work an app development on an app which request an audio function in background as an alert sound. during debug testing , the function work fine, but once I testing standalone without debugging , The function not work , it will play out the sound when I back to app. does any way to trace the issues ?

Hello! We stumbled upon a problem with our karaoke app where user on iPhone 16e/iOS 18.5 has problem with mic capture, other users cannot hear him. The mic capture is working fine on 17.5, 16.8. Maybe there is something else we need when configuring AVAudioSession for iOS 18.5? Currently it's set up like this: override func viewDidLoad() { super.viewDidLoad() UIApplication.shared.isIdleTimerDisabled = true mRoomId = appDelegate.getRoomId() let audioSession = AVAudioSession.sharedInstance() try! audioSession.setCategory(.playAndRecord, mode: .voiceChat, options: [.defaultToSpeaker]) try! audioSession.setPreferredSampleRate(48000) try! audioSession.setActive(true, options: []) }

We’ve encountered a reproducible issue where the iPhone fails to reconnect to a Wi-Fi access point under the following conditions: The device is connected to a 2.4GHz Wi-Fi network. A Bluetooth audio accessory is connected (e.g. headset). AVAudioSession is active (such as during a voice call or when using the Voice Memos app). The user moves away from the access point, causing a disconnect. Upon returning within range, the access point is no longer recognized or reconnected while AVAudioSession remains active. However, if the Bluetooth device is disconnected or the AVAudioSession is deactivated, the Wi-Fi access point is immediately recognized again. We confirmed this behavior not only in my app but also using Apple's built-in Voice Memos app, suggesting this is not specific to our implementation. It appears that the Wi-Fi system deprioritizes reconnection while AVAudioSession is engaged. Could this be by design? Or is this a known issue or limitation with Wi-Fi and AVAudioSession interaction? Test Environment: Device: iPhone 13 mini iOS: 17.5.1 Wi-Fi: 2.4GHz band Accessories: Bluetooth headset We’d appreciate clarification on whether this is expected behavior or a bug. Thank you!

Hi, I'm still stuck getting a basic record-with-playthrouh pipeline to work. Has anyone a sample of setting up a AVAudioEngine pipeline for recording with playthrough? Plkaythrough works with AVPlayerNode as input but not with any microphone input. The docs mention the "enabled state" of the outputNode of the engine without explaining the concept, i.e. how to enable an output. When the engine renders to and from an audio device, the AVAudioSession category and the availability of hardware determines whether an app performs output. Check the output node’s output format (specifically, the hardware format) for a nonzero sample rate and channel count to see if output is in an enabled state. Well, in my setup the output is NOT enabled, and any attempt to switch (e.g. audioEngine.outputNode.auAudioUnit.setDeviceID(deviceID) )/ attach a dedicated device / ... results in exceptions / errors

I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?

We require assistance in resolving a critical audio design conflict within our Push-to-Talk (PTT) application. Our current volume amplification strategy—which relies on applying a GAIN factor to PCM samples in conjunction with setting the AVAudioSession category to Playback—is working successfully when PTT is used independently. However, upon integrating and reporting the same PTT call through the CallKit framework, this amplification effect is lost. The CallKit integration appears to be forcing a different, non-amplifying audio session category or configuration, negatively impacting the user's perceived call volume. We need guidance on how to maintain the AVAudioSessionCategoryPlayback setting, or an equivalent high-volume configuration, while operating under the control of CallKit.

New to iOS development and I've been trying to make heads or tails of the documentation. I know there is a difference between the data fields returned from songs from the user library and from the category, but whenever I search on the apple site I can't find a list of each. For example, Im trying to get the releaseDate of a song in my library, but it seems I'll have to cross-query either the catalog entry for the using song.catalogID or the song.irsc but when I try to use them I can't find a cross reference between the two. I'm totally turned around. Also trying to determine if a song in my library has been favorited or not? isFavorited (or something similar) doesn't seem to be a thing. Using this code and trying to find a way to display a solid star if the song has been favorited or an empty one if it's not. Seems like a basic request but I can't find anything on how to do it. I've searched docs, googled, tried. Does apple want us to query the user's Favorited Songs playlist or something? How do I know which playlist that is? I know isFavorited isn't a thing, just using it here so you can see what my intension is: HStack(spacing: 10) { Image(systemName: song.isFavorited ? "star.fill" : "star") .foregroundColor(song.isFavorited ? .yellow : .gray) Image(systemName: "magnifyingglass") }