Hi, I'm trying to setup a AVAudioEngine for USB Audio recording and monitoring playthrough. As soon as I try to setup playthough I get an error in the console: AVAEInternal.h:83 required condition is false: [AVAudioEngineGraph.mm:1361:Initialize: (IsFormatSampleRateAndChannelCountValid(outputHWFormat))] Any ideas how to fix it? // Input-Device setzen try? setupInputDevice(deviceID: inputDevice) let input = audioEngine.inputNode // Stereo-Format erzwingen let inputHWFormat = input.inputFormat(forBus: 0) let stereoFormat = AVAudioFormat(commonFormat: inputHWFormat.commonFormat, sampleRate: inputHWFormat.sampleRate, channels: 2, interleaved: inputHWFormat.isInterleaved) guard let format = stereoFormat else { throw AudioError.deviceSetupFailed(-1) } print("Input format: \(inputHWFormat)") print("Forced stereo format: \(format)") audioEngine.attach(monitorMixer) audioEngine.connect(input, to: monitorMixer, format: format) // MonitorMixer -> MainMixer (Output) // Problem here, format: format also breaks. audioEngine.connect(monitorMixer, to: audioEngine.mainMixerNode, format: nil)

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!

I recently installed a rear-view camera in my car, and ever since, I've been experiencing a frustrating issue with my CarPlay. After about 15 seconds of playing audio via Bluetooth, the sound stops coming out of the speakers, even though the song continues to run in the background. For context, my stereo system is an aftermarket unit that I installed to enable CarPlay functionality. Everything worked perfectly before adding the rear-view camera. Unfortunately, my unit does not have a port for a wired connection, so I can't test the audio using a cable. Has anyone experienced a similar issue? Could the camera installation be interfering with the Bluetooth or audio system somehow? Any advice or troubleshooting tips would be greatly appreciated!

I have an app that records a health provider’s conversation with a patient. I am using Audio Queue Services for this. If a phone call comes in while recording, the doctor wants to be able to ignore the call and continue the conversation without touching the phone. If the doctor answers the call, that’s fine – I will stop the recording. I can detect when the call comes in and ends using CXCallObserver and AVAudioSession.interruptionNotification. Unfortunately, when a call comes in and before it is answered or dismissed, the audio is suppressed. After the call is dismissed, the audio continues to be suppressed. How can I continue to get audio from the mic as long as the user does not answer the phone call?

I have an AUv3 plugin which uses an FFT - which requires n samples before it can produce any output - so, depending on the relation between the host's buffer size and the FFT window size, it may receive a several buffers of samples, producing no output, and then dumping out what it has once a sufficient number of samples have been received. This means that output is produced in fits and starts, in batches that match the FFT size (modulo oversampling) - e.g. if being fed buffers of 256 samples with an fft size of 1024, the output buffer sizes will be 0 for the first 3 buffers, and upon the fourth, the first 256 processed samples are returned and the remaining 768 cached; the next three buffers will return the remaining cached samples while processing and buffering subsequent ones, and so forth. The internal mechanics of that I have solved, caching output if the current output buffer is too small, and so forth - so it all works as advertised, and the plugin reports its latency correctly. And when run as an app in demo-mode, playback works as expected. In the plugin's render block, it captures the number of frames written, and if it is less than the number of frames passed in, adjusts the mDataByteSize of the output buffers to match the actual quantity of data being returned: unsigned int framesWritten = (unsigned int) processHelper->processWithEvents(inAudioBufferList, outAudioBufferList, timestamp, frameCount, realtimeEventListHead); if (framesWritten < frameCount) { for (UInt32 i = 0; i < outAudioBufferList->mNumberBuffers; ++i) { outAudioBufferList->mBuffers[i].mDataByteSize = framesWritten * 4; // assume 4 byte floats } } However, there are a couple of serious issues: auval -v fails it with - Render Test at 64 frames, sample rate: 22050 Hz ERROR: Output Buffer Size does not match requested When connected to Logic Pro, it appears that mDataByteSize is ignored, and the entire allocated buffer is read - audio has sections of silence snipped into it which corresponds the number of empty buffers being returned If I set Logic's buffer size to 1024 and use a 1024 sample FFT window, the plugin works correctly - but of course a plugin cannot dictate buffer size, and `1024 is too small a window size to be useful for anything but filtering very high frequencies This seems like it has to be a solvable problem, and most likely the issue is in how my code reports the number of usable samples in the returned buffer. So, what is the correct way for a plugin to report that it has no samples to return, but will, uh, real soon now? I know I could convert this plugin to be one that does offline rendering of the entire input, but this is real-time processing, just with a fixed amount of latency, so that should not be necessary.

ApplicationMusicPlayer is not available on watchOS but all other platforms. Is there a technical reason for that like battery life? Same goes for SystemMusicPlayer and MPMusicPlayerController. I already filed feedbacks for that.

After update,WeChat voice chatting no sounds, please help

In iOS 18, CarPlay shows an error: “There was a problem loading this content” after playback starts. Audio works fine, but the Now Playing screen doesn’t load. I’m using MPPlayableContentManager. This worked fine in iOS 17. Anyone else seeing this error in iOS 18?

Hello everyone, I'm implementing the new AVInputPickerInteraction API on iOS 26 to allow users to select their microphone from a custom settings menu before recording. The implementation seems correct, but I'm encountering a strange issue where the input selection immediately reverts to the previous device. The Situation: The picker is presented correctly via a manual call to .present(). I can see all available inputs (e.g., "iPhone Microphone" and "AirPods"). The current input is "iPhone Microphone". I tap on "AirPods". The UI updates to show "AirPods" as selected for a fraction of a second, then immediately jumps back to "iPhone Microphone". The same thing happens in reverse. It seems like the system is automatically reverting the audio route change requested by the picker. My Implementation: My setup follows the standard pattern discussed in the WWDC sessions. Setup Code: This setup is performed once before the user can trigger the picker. @available(iOS 26.0, *) var inputPickerInteraction: AVInputPickerInteraction? // Note: The AVAudioSession is configured to .playAndRecord // and set to active elsewhere in the code before this setup is called. if #available(iOS 26.0, *) { // Setup the picker let picker = AVInputPickerInteraction() self.inputPickerInteraction = picker self.view.addInteraction(picker) // Added to establish context } Presentation Code: When a user selects "Change Input" from my custom settings menu, I call .present() on the main thread. // In a delegate method from a custom menu if #available(iOS 26.0, *) { DispatchQueue.main.async { self.inputPickerInteraction?.present(animated: true) } } What I've already checked: The AVAudioSession is active and its category is .playAndRecord. The inputPickerInteraction object is not nil. The .present() method is being called on the main thread. The picker is added to a view using view.addInteraction() in the setup phase. I've reviewed my code to ensure there is no other logic that could be manually resetting the AVAudioSession's preferred input. Has anyone else experienced this behavior? I suspect this might be a bug in the new API, but I want to make sure I'm not missing a crucial step in managing the AVAudioSession state. Any insights or potential workarounds would be greatly appreciated. Thank you.

I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

I've been trying to use AVMIDIControlChangeEvent with a bankSelect message type to change the instrument the sequencer uses on a AVMusicTrack with no luck. I started with the Apple AVAEMixerSample, converting the initial setup/loading and portions dealing with the sequencer to Swift. I got that working and playing the "bluesyRiff" and then modified it to play individual notes. So my createAndSetupSequencer looked like func createAndSetupSequencer() { sequencer = AVAudioSequencer(audioEngine: engine) // guard let midiFileURL = Bundle.main.url(forResource: "bluesyRiff", withExtension: "mid") else { // print (" failed guard trying to get URL for bluesyRiff") // return // } let track = sequencer.createAndAppendTrack() var currTime = 1.0 for i: UInt32 in 0...8 { let newNoteEvent = AVMIDINoteEvent(channel: 0, key: 60+i, velocity: 64, duration: 2.0) track.addEvent(newNoteEvent, at: AVMusicTimeStamp(currTime)) currTime += 2.0 } The notes played, so then I also replaced the gs_instruments sound bank with GeneralUser GS MuseScore v1.442 first by trying guard let soundBankURL = Bundle.main.url(forResource: "GeneralUser GS MuseScore v1.442", withExtension: "sf2") else { return} do { try sampler.loadSoundBankInstrument(at: soundBankURL, program: 0x001C, bankMSB: 0x79, bankLSB: 0x08) } catch{.... } This appears to work, the instrument (8 which is "Funk Guitar") plays. If I change to bankLSB: 0x00 I get the "Palm Muted guitar". So I know that the soundfont has these instruments Stuff goes off the rails when I try to change the instruments in createAndSetupSequencer. Putting let programChange = AVMIDIProgramChangeEvent(channel: 0, programNumber: 0x001C) let bankChange = AVMIDIControlChangeEvent(channel: 0, messageType: AVMIDIControlChangeEvent.MessageType.bankSelect, value: 0x00) track.addEvent(programChange, at: AVMusicTimeStamp(1.0)) track.addEvent(bankChange, at: AVMusicTimeStamp(1.0)) just before my add note loop doesn't produce any change. Loading bankLSB 8 (Funk) in sampler.loadSoundBankInstrument and trying to change with bankSelect 0 (Palm muted) in createAndSetupSequencer results in instrument 8 (Funk) playing not Palm Muted. Loading bankLSB 0 (Palm muted) and trying to change with bankSelect 8 (Funk) doesn't work, 0 (Palm muted) plays I also tried sampler.loadInstrument(at: soundBankURL) and then I always get the first instrument in the sound font file (piano)no matter what values I put in my programChange/bankChange I've also changed the time in the track.addEvent to be 0, 1.0, 3.0 etc to no success The sampler.loadSoundBankInstrument specifies two UInt8 parameters, bankMSB and BankLSB while the AVMIDIControlChangeEvent bankSelect value is UInt32 suggesting it might be some combination of bankMSB and BankLSB. But the documentation makes no mention of what this should look like. I tried various combinations of 0x7908, 0X0879 etc to no avail I will also point out that I am able to successfully execute other control change events For example adding if i == 1 { let portamentoOnEvent = AVMIDIControlChangeEvent(channel: 0, messageType: AVMIDIControlChangeEvent.MessageType.portamento, value: 0xFF) track.addEvent(portamentoOnEvent, at: AVMusicTimeStamp(currTime)) let portamentoRateEvent = AVMIDIControlChangeEvent(channel: 0, messageType: AVMIDIControlChangeEvent.MessageType.portamentoTime, value: 64) track.addEvent(portamentoRateEvent, at: AVMusicTimeStamp(currTime)) } does produce a change in the sound. (As an aside, a definition of what portamento time is, other than "the rate of portamento" would be welcome. is it notes/seconds? freq/minute? beats/hour?) I was able to get the instrument to change in a different program using MusicPlayer and a series of MusicTrackNewMIDIChannelEvent on a track but these operate on a MusicTrack not the AVMusicTrack which the sequencer uses. Has anyone been successful in switching instruments through an AVMIDIControlChangeEvent or have any feedback on how to do this?

Is there any way for me to use an AutoMix api in my IOS apps, I would play tracks using the Apple Music api and use AutoMix to attempt to merge tracks. Is this feature/api available to developers.

Currently, I have successfully used ChannelMap to map hardware input channels and obtained audio data from the hardware device's MIC and OTG inputs. Additionally, I have used ChannelMap to map output channels to freely feed data for playback to each output channel. However, I now have a problem. I have a hardware device that only has output channels (no input channels), and the system has set this hardware device as the default playback device. In this case, how can I obtain the audio data being played to the output channels for modification?

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

We have the necessary background recording entitlements, and for many users... do not run into any issues. However, there is a subset of users that routinely get recordings ending.. we have narrowed this down and believe it to be the work of the watch dog. First we removed the entire view hierarchy when app is backgrounded. There is just 'Text("Recording")' This got the CPU usage in profiler down to 0%. We saw massive improvements to recording success rate. We walked away assuming that was enough. However we are still seeing the same sort of crashes. All in the background. We're using Observation to drive audio state changes to a Live Activity. Are those Observations causing the problem? Why doesn't apple provide a better API to background audio? The internet is full of weird issues https://stackoverflow.com/questions/76010213/why-is-my-react-native-app-sometimes-terminated-in-the-background-while-tracking https://stackoverflow.com/questions/71656047/why-is-my-react-native-app-terminating-in-the-background-while-recording-ios-r https://github.com/expo/expo/issues/16807 This is such a terrible user experience. And we have very little visibility into what is happening and why. No where in apple documentation states that in order for background recording to work, the app can only be 'Text("Recording")' It does not outline a CPU or memory threshold. It just kills us.

Good day, ladies and gents. I have an application that reads audio from the microphone. I'd like it to also be able to read from the Mac's audio output stream. (A bonus would be if it could detect when the Mac is playing music.) I'd eventually be able to figure it out reading docs, but if someone can give a hint, I'd be very grateful, and would owe you the libation of your choice. Here's the code used to set up the AudioUnit: -(NSString*) configureAU { AudioComponent component = NULL; AudioComponentDescription description; OSStatus err = noErr; UInt32 param; AURenderCallbackStruct callback; if( audioUnit ) { AudioComponentInstanceDispose( audioUnit ); audioUnit = NULL; } // was CloseComponent // Open the AudioOutputUnit description.componentType = kAudioUnitType_Output; description.componentSubType = kAudioUnitSubType_HALOutput; description.componentManufacturer = kAudioUnitManufacturer_Apple; description.componentFlags = 0; description.componentFlagsMask = 0; if( component = AudioComponentFindNext( NULL, &description ) ) { err = AudioComponentInstanceNew( component, &audioUnit ); if( err != noErr ) { audioUnit = NULL; return [ NSString stringWithFormat: @"Couldn't open AudioUnit component (ID=%d)", err] ; } } // Configure the AudioOutputUnit: // You must enable the Audio Unit (AUHAL) for input and output for the same device. // When using AudioUnitSetProperty the 4th parameter in the method refers to an AudioUnitElement. // When using an AudioOutputUnit for input the element will be '1' and the output element will be '0'. param = 1; // Enable input on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Input, 1, &param, sizeof(UInt32) ); chkerr("Couldn't set first EnableIO prop (enable inpjt) (ID=%d)"); param = 0; // Disable output on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Output, 0, &param, sizeof(UInt32) ); chkerr("Couldn't set second EnableIO property on the audio unit (disable ootpjt) (ID=%d)"); param = sizeof(AudioDeviceID); // Select the default input device AudioObjectPropertyAddress OutputAddr = { kAudioHardwarePropertyDefaultInputDevice, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMaster }; err = AudioObjectGetPropertyData( kAudioObjectSystemObject, &OutputAddr, 0, NULL, &param, &inputDeviceID ); chkerr("Couldn't get default input device (ID=%d)"); // Set the current device to the default input unit err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_CurrentDevice, kAudioUnitScope_Global, 0, &inputDeviceID, sizeof(AudioDeviceID) ); chkerr("Failed to hook up input device to our AudioUnit (ID=%d)"); callback.inputProc = AudioInputProc; // Setup render callback, to be called when the AUHAL has input data callback.inputProcRefCon = self; err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_SetInputCallback, kAudioUnitScope_Global, 0, &callback, sizeof(AURenderCallbackStruct) ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); param = sizeof(AudioStreamBasicDescription); // get hardware device format err = AudioUnitGetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Input, 1, &deviceFormat, &param ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); audioChannels = MAX( deviceFormat.mChannelsPerFrame, 2 ); // Twiddle the format to our liking actualOutputFormat.mChannelsPerFrame = audioChannels; actualOutputFormat.mSampleRate = deviceFormat.mSampleRate; actualOutputFormat.mFormatID = kAudioFormatLinearPCM; actualOutputFormat.mFormatFlags = kAudioFormatFlagIsFloat | kAudioFormatFlagIsPacked | kAudioFormatFlagIsNonInterleaved; if( actualOutputFormat.mFormatID == kAudioFormatLinearPCM && audioChannels == 1 ) actualOutputFormat.mFormatFlags &= ~kLinearPCMFormatFlagIsNonInterleaved; #if __BIG_ENDIAN__ actualOutputFormat.mFormatFlags |= kAudioFormatFlagIsBigEndian; #endif actualOutputFormat.mBitsPerChannel = sizeof(Float32) * 8; actualOutputFormat.mBytesPerFrame = actualOutputFormat.mBitsPerChannel / 8; actualOutputFormat.mFramesPerPacket = 1; actualOutputFormat.mBytesPerPacket = actualOutputFormat.mBytesPerFrame; // Set the AudioOutputUnit output data format err = AudioUnitSetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Output, 1, &actualOutputFormat, sizeof(AudioStreamBasicDescription)); chkerr("Could not change the stream format of the output device (ID=%d)"); param = sizeof(UInt32); // Get the number of frames in the IO buffer(s) err = AudioUnitGetProperty( audioUnit, kAudioDevicePropertyBufferFrameSize, kAudioUnitScope_Global, 0, &audioSamples, &param ); chkerr("Could not determine audio sample size (ID=%d)"); err = AudioUnitInitialize( audioUnit ); // Initialize the AU chkerr("Could not initialize the AudioUnit (ID=%d)"); // Allocate our audio buffers audioBuffer = [self allocateAudioBufferListWithNumChannels: actualOutputFormat.mChannelsPerFrame size: audioSamples * actualOutputFormat.mBytesPerFrame]; if( audioBuffer == NULL ) { [ self cleanUp ]; return [NSString stringWithFormat: @"Could not allocate buffers for recording (ID=%d)", err]; } return nil; } (...again, it would be nice to know if audio output is active and thereby choose the clean output stream over the noisy mic, but that would be a different chunk of code, and my main question may just be a quick edit to this chunk.) Thanks for your attention! ==Dave [p.s. if i get more than one useful answer, can i "Accept" more than one, to spread the credit around?] {pps: of course, the code lines up prettier in a monospaced font!}

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

Hi, I'm trying to plan out development of an app and am wondering if it is possible to have user generated content automatically populate into a custom shazamkit catalogue and be able to query this catalogue non-locally? Storing all the submissions locally would obviously not scale.

Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!

Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!