Hello, I am experiencing an issue with programmatically capturing a GPU trace using MTLCaptureManager. The .gputrace file that is generated appears to be corrupted, and I'm looking for guidance or a solution. Description of the Problem: I am using MTLCaptureManager.sharedCaptureManager to capture a Metal frame and save it to disk. The generated .gputrace file is consistently reported as 0 bytes in size by the file system. Crucially, when I compress this 0-byte .gputrace file into a .zip archive, the resulting archive contains the full, expected data. After unzipping, the file can be opened and viewed correctly in Xcode. However,When inspecting the file's contents using NSFileManager in Objective-C (treating it as a directory), the internal structure is different from a .gputrace file captured directly from Xcode's Metal Debugger. capture in xcode capture in file Finally,When capturing multiple frames programmatically, the first captured frame contains valid buffer data. However, for subsequent frames (starting from the second frame), the corresponding buffer contents are all zero-filled. Frame 1: All MTLBuffer data is correctly captured and populated. Frame 2 and onward: The same MTLBuffer objects are present in the trace, but their contents are entirely 0 (i.e., the data is not captured or is corrupted). In this case, the on-screen display is normal, but the captured frame is incorrect. The frame captured directly in Xcode is also correct. Only the frame captured to a file is abnormal.

I am trying the simplest use of attachment in realityKit and get Contextual closure type @MainActor, @Sendable (inout RealityViewCameraContent) async -> void expects 1 argument, but 2 were used in closure body. Also i get cannot find Attachment in scope

I'm encountering a build failure when trying to install the Game Porting Toolkit via Homebrew. The installation fails during the game-porting-toolkit-compiler dependency build phase with a CMake compatibility error. Error Message: CMake Error at CMakeLists.txt:3 (cmake_minimum_required): Compatibility with CMake < 3.5 has been removed from CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. Or, add -DCMAKE_POLICY_VERSION_MINIMUM=3.5 to try configuring anyway. -- Configuring incomplete, errors occurred! Environment: macOS: 15.6.1 (Sequoia) Homebrew: 5.0.1 CMake: 3.20.2 Architecture: x86_64 (via Rosetta) Formula: apple/apple/game-porting-toolkit-compiler v0.1 Source: crossover-sources-22.1.1.tar.gz Steps to Reproduce: Install x86_64 Homebrew for Rosetta compatibility Run: arch -x86_64 /usr/local/bin/brew install apple/apple/game-porting-toolkit Build fails during dependency installation Root Cause: The LLVM/Clang sources included in crossover-sources-22.1.1.tar.gz contain a CMakeLists.txt file that specifies a minimum CMake version lower than 3.5. Modern CMake versions (3.5+) have removed backward compatibility with these older version requirements. Potential Solutions: Update the Homebrew formula to patch the CMakeLists.txt with cmake_minimum_required(VERSION 3.5) or higher Update to newer CrossOver sources with updated CMake requirements Add the -DCMAKE_POLICY_VERSION_MINIMUM=3.5 flag to the CMake build command in the formula Is this a known issue? Are there plans to update the formula or the source package to resolve this compatibility problem? Any guidance on a workaround would be appreciated. Full log available at: /Users/kentarovadney/Library/Logs/Homebrew/game-porting-toolkit-compiler/02.cmake.log Thanks for any assistance!

https://developer.apple.com/forums/profile/mozheralqahtani

Hi, I've just moved my SpriteKit-based game from UIView to SwiftUI + SpriteView and I'm getting this mesage Adding 'GCControllerView' as a subview of UIHostingController.view is not supported and may result in a broken view hierarchy. Add your view above UIHostingController.view in a common superview or insert it into your SwiftUI content in a UIViewRepresentable instead. Here's how I'm doing this struct ContentView: View { @State var alreadyStarted = false let initialScene = GKScene(fileNamed: "StartScene")!.rootNode as! SKScene var body: some View { ZStack { SpriteView(scene: initialScene, transition: .crossFade(withDuration: 1), isPaused: false , preferredFramesPerSecond: 60) .edgesIgnoringSafeArea(.all) .onAppear { if !self.alreadyStarted { self.alreadyStarted.toggle() initialScene.scaleMode = .aspectFit } } VirtualControllerView() .onAppear { let virtualController = BTTSUtilities.shared.makeVirtualController() BTTSSharedData.shared.virtualGameController = virtualController BTTSSharedData.shared.virtualGameController?.connect() } .onDisappear { BTTSSharedData.shared.virtualGameController?.disconnect() } } } } struct VirtualControllerView: UIViewRepresentable { func makeUIView(context: Context) -> UIView { let result = PassthroughView() return result } func updateUIView(_ uiView: UIView, context: Context) { } } class PassthroughView: UIView { override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? { for subview in subviews.reversed() { let convertedPoint = convert(point, to: subview) if let hitView = subview.hitTest(convertedPoint, with: event) { return hitView } } return nil } }

Due to the release of ProMotion devices, the system may switch frame rates in certain scenarios, resulting in the loss of reference value for data collected through CADisplayLink callbacks at a fixed 60Hz frame rate. We cannot distinguish whether the slow callback of CADisplayLink is due to a stutter or a system switch in frame rate. I know Hitch Time Ratio, but I can't use this scheme for some reasons. How can I distinguish between stuck and frame rate gear shift in CADisplaylink callback? In iOS 15, CADisplayLink.preferredFrameRateRange.preferred always returns 0, while minimum and maximum do change. Can I use these minimum and maximum range values as criteria to distinguish between frame rate switching and stuttering?

Hello, Shaders in our application is written using HLSL and we rely on Metal Shader Converter to convert DXIL to Metal IR. We ran into an issue that causes metal pipeline state creation to fail when vertex stage-in function is used on AMD GPUs. Here's the error reported by Metal in Xcode output: Compiler failed with XPC_ERROR_CONNECTION_INTERRUPTED XPC_ERROR_CONNECTION_INTERRUPTED MTLCompiler: Compilation failed with XPC_ERROR_CONNECTION_INTERRUPTED on 4 try. This error suggests an unexpected interruption in the connection. Possible reasons: a crash in the compiler service, termination by the OS due to resource constraints (e.g., jetsam), a timeout in the service, or an issue with IPC. Verify system stability and check the logs for more details. Compiler failed with XPC_ERROR_CONNECTION_INVALID XPC_ERROR_CONNECTION_INVALID MTLCompiler: Compiler encountered XPC_ERROR_CONNECTION_INVALID: failed to check-in, peer may have been unloaded: mach_error=10000003 (is the OS shutting down or process jetsammed?) Compilation failed due to an interrupted connection: XPC_ERROR_CONNECTION_INTERRUPTED. This error occurred after multiple retries. which seems to indicate a internal compiler error. I have a minimal repro here: https://github.com/kcloudy0717/metal_pso_fail/tree/main, simply follow the instructions in README.

When running my game in the Unity Editor on Windows platform I get an error: DllNotFoundException: GameKitWrapper assembly:<unknown assembly> type:<unknown type> member:(null) Apple.GameKit.DefaultNSErrorHandler.Init () (at ./Library/PackageCache/com.apple.unityplugin.gamekit@0abcad546f73/Source/DefaultHandlers.cs:35) This is because GameKitWrapper dynamically linked library is not available under Windows platform. Besides, "Apple Build Settings" are declared under UNITY_EDITOR_OSX and also not available under Windows platform. Does anyone managed to solve this?

Hi, I’m using the latest iPad Pro (13-inch) and I can see that Metal offers an rgb10a2unorm texture for rendering, but when I render a grey ramp and measure the actual luminance, I get a pattern that I would expect from an 8-bit texture (see below). Before I start ripping apart all my code, is there anything else I need to do to convince iOS to render my texture in 10-bit? I already tried setting the PixelFormat in my CMetalLayer to rgb10a2unorm, but that didn’t change anything.

Question: I'm encountering an issue with in-app purchases (IAP) in Unity, specifically for a non-consumable product in the iOS sandbox environment. Below are the details: Environment: Unity Version: 2022.3.55f1 Unity In-App Purchasing Version: v4.12.2 Device: iPhone (15, iOS 18.1.1) Connection: Wi-Fi iOS Settings: In-App Purchases set to “Allowed” initially Problem Behavior: I attempted to purchase a non-consumable item for the first time. The payment is successfully completed by entering the password. I then background the game app and navigate to the iOS Settings to set In-App Purchases to "Don't Allow." After returning to the game and either closing or killing the app, I try to purchase the same non-consumable item again. I checked canMakePayments() through the Apple configuration, and the app correctly detected that I could not make purchases due to the restriction. I then navigate back to Settings and set In-App Purchases to "Allow." Upon returning to the game, I try purchasing the non-consumable item again. A pop-up appears, saying, "You’ve already purchased this. Would you like to get it again for free?" The issue is: Will it deduct money for the second time, and why is the system allowing the user to purchase the same non-consumable item multiple times after purchasing it once? Is this the expected behavior for Unity In-App Purchasing, or is there something I might be missing in handling non-consumable purchases in this scenario? Additional Information: I’ve confirmed that the "In-App Purchases" are set to “Allowed” before attempting the purchase again. I understand that non-consumable products should not be purchased more than once, so I’m unsure why the system is offering to let the user purchase it again. I appreciate any insights into whether this is expected behavior or if I need to adjust how I handle the purchase flow.

Hello, I am quite new to using the metal API and was wondering if it was common (or even possible) if you knew that, when a pipeline was created, you never needed to make another one with the same shaders again, if it is safe to release the library the was used to reference the shaders? Only asking because this is possible in other apis, but apple never mentions (as far as I have found) if this is safe or not safe to do.

Does anyone know if we will be able to airplay content from another Apple device, say an iPad or iPhone to the Vision Pro?

subj And how in this case are beautiful system dials made with smoke effects and other particles?

Hi, I'm Beginner with Metal 4 and Model I/O 🥺. I can render simple models with just one mesh, but when I try to render models with SubMeshes, nothing shows up on screen. Can anyone help me figure out how to properly render models with multiple submeshes? I think I'm not iterating through them correctly or maybe missing some buffers setup. Here's what I have so far: https://www.icloud.com.cn/iclouddrive/0a6x_NLwlWy-herPocExZ8g3Q#LoadModel

I have several games on the app store which are setup as "For Kids" which means these games cannot have any way to access the outside world including the App Store. No problem. These games have worked fine for years until iOS 26. Now, all my updates are being rejected because the new version of Game Center running on iPadOS 26 has a way for people to exit the game and go to the App Store. I have no control over this since it's built into Game Center, and the app review folks want me to put a "parental gate" on it, but there's no way to do that because... well... it's in Game Center, not my code. So, I'm unable to update my apps because of this. Presumably, the existing versions on the app store still do this exact same thing, so my update isn't going to make any difference. Does anyone know of a way to make that crap at the top go away so this isn't an issue?

Hi all, I'm encountering an issue with Metal raytracing on my M5 MacBook Pro regarding Instance Acceleration Structure (IAS). Intersection tests suddenly stop working after a certain point in the sampling loop. Situation I implemented an offline GPU path tracer that runs the same kernel multiple times per pixel (sampleCount) using metal::raytracing. Intersection tests are performed using an IAS. Since this is an offline path tracer, geometries inside the IAS never changes across samples (no transforms or updates). As sampleCount increases, there comes a point where the number of intersections drops to zero, and remains zero for all subsequent samples. Here's a code sketch: let sampleCount: UInt16 = 1024 for sampleIndex: UInt16 in 0..<sampleCount { // ... do { let commandBuffer = commandQueue.makeCommandBuffer() // Dispatch the intersection kernel. await commandBuffer.completed() } do { let commandBuffer = commandQueue.makeCommandBuffer() // Use the intersection test results from the previous command buffer. await commandBuffer.completed() } // ... } kernel void intersectAlongRay( const metal::uint32_t threadIndex [[thread_position_in_grid]], // ... const metal::raytracing::instance_acceleration_structure accelerationStructure [[buffer(2)]], // ... ) { // ... const auto result = intersector.intersect(ray, accelerationStructure); switch (result.type) { case metal::raytracing::intersection_type::triangle: { // Write intersection result to device buffers. break; } default: break; } Observations Encoding both the intersection kernel and the subsequent result usage in the same command buffer does not resolve the problem. Switching from IAS to Primitive Acceleration Structure (PAS) fixes the problem. Rebuilding the IAS for each sample also resolves the issue. Intersections produce inconsistent results even though the IAS and rays are identical — Image 1 shows a hit, while Image 2 shows a miss. Questions Am I misusing IAS in some way ? Could this be a Metal bug ? Any guidance or confirmation would be greatly appreciated.

I'm experiencing a specific issue where when using any of the MacOS 26 Tahoe betas with Low Power Mode enabled and using Vsync in fullscreen, my application framerate gets limited to a hard 30 fps. I have not experienced this on any older OS. For example Low Power Mode on 13.6 Ventura with Vsync fullscreen lets my application run at full 60 fps without issues. Is this a bug or a change in behavior of Low Power Mode on Tahoe? My application is 3D, runs at 60 fps and is sensitive to tearing, so I need Vsync and it is mostly utilized in fullscreen. And Low Power Mode is a default for many Macs, so default experience on Tahoe currently is a halved 30 fps. However there also seems to be inconsistencies of on which machines this happens, but older OSes are always fine.

My app has a number of heterogeneous GPU workloads that all run concurrently. Some of these should be executed with the highest priority because the app’s responsiveness depends on them, while others are triggered by file imports and the like which should have a low priority. If this was running on the CPU I’d assign the former User Interactive QoS and the latter Utility QoS. Is there an equivalent to this for GPU work?

hello i am new to apple ecosystem and development i have some coding experience with c# now i like to develop my game for iphone 16 and up(due to ability to run ai models) but i am having hard time figuring out what to use there is a lot of resources for scene-kit but on its doc page it says its deprecated so i look at the reality-kit docs and tutorials and its strictly tells how to develop for visionos and i am really confused about this since there is no tutorials that shows how to develop a game for ios with reality-kit that does not focus visionos. i just want to develop for iphone 16 and up but i cant find resources focuses at that.

Hi, I am a Multimedia and Graphics researcher and I am wondering if OpenGL API and drivers will be removed after appleOS 26? macOS 26 iOS 26 iPadOS 26 visionOS 26 I am asking this because most of the libraries I use depends on OpenGL. Like CGAL, libigl, immediate mode ui, nanovg, nanogui, bullet physics. Transitioning from Vulkan and metal while using and learning those libraries is just not viable. I would like to ask you that. I am the sole developer and I just want to ask you that. Regards.