I couldn't help noticing that the Maps and Find My apps make extensive use of "sheets stacked on top of each other" to represent its navigation hierarchy, with a "new content comes in from the bottom" orientation instead of a navigation stack with "new content comes in from the right side" oriented transitions. I'm interested in this topic because I have a similar navigation-hierarchy-over-a-map case in my app (with a custom map view though) and I'm torn back and forth between the approach of replicating the "stacked sheets" vs. putting a navigation stack in a sheet, esp. with the navstack approach being way more attainable with the iOS 26 glass design. I couldn't find any guidance for this kind of UI in the Human Interface Guidelines; I'm leaning towards the navstack-approach for my app; but in terms of the behavior of the SwiftUI container views in this scenario it seems a little bit of an uphill path. Any thoughts on what pattern should be preferred for presenting a deep navigational hierarchy on top of a map-like view?

Hi all, I wanted to check whether the NFC bottom-sheet UI shown by iOS during an NFC reading session can be customized. We have a Figma design (attached) for how the sheet should look, but we are not sure whether iOS allows modifying the default NFC UI. Is UI customization supported, or is the bottom sheet fully controlled by the system? Thanks in advance.

Hi there. I want to use Adobe XD for designing and prototyping apps, and I would like to get the UIKit design resources working. I downloaded it and tried to open it with Adobe XD, but it threw this error: There was an error opening the file Apple iOS 26 UI Kit.sketch (Error code: 115) I really prefer to use the UIKit in Adobe XD rather than paying for Figma or Sketch. Thanks. Apple Design Resources

I have the following code that renders a one-page PDF: func render() -> URL { let renderer = ImageRenderer(content: pdfView()) let url = URL.documentsDirectory.appending(path: "filename.pdf") renderer.render { size, context in var document = CGRect(x: 0, y: 0, width: 2550, height: 3300) guard let pdf = CGContext(url as CFURL, mediaBox: &document, nil) else { return } pdf.beginPDFPage(nil) context(pdf) pdf.endPDFPage() pdf.closePDF() } return url } func pdfView() -> some View { Text("View") } How can this be modified so that it renders a PDF with more than one page?

I have really examined the swipe left Camera function mode and sincerely believe it is no more important especially when there no option in the settings to turn it on or off. I will highly recommend a total scrap in the iOS 26 or if possible a function to activate and deactivate it.

Hi, I want to generate some sample datas for demonstrating the functions of my app when the app launched. My codes are as followings: func generateSampleData() { let hasLaunchedKey = "HasLaunchedBefore" let defaults = UserDefaults.standard if !defaults.bool(forKey: hasLaunchedKey) { //generate the demo data } defaults.set(true, forKey: hasLaunchedKey) } And I put the func in a view's onAppear modifier. I found every time I go the view, it generates the demo data again, which results in producing a lot of demo data. But I have set the status of the function running in the userdefault. Why did it happen? Best Wishes,

In Apple Vision Pro, I want to implement a HUD page similar to the one in Medivis' SuricalAR product (i.e. the UI is fixed on the screen field of view rather than in space). How should I do it?

Scenario is when keyboard is opened within the app being developed then switch to other app, for instance, Notes app and create a note to enable keyboard from there. While the Notes app keyboard is active switch back to the developed app the keyboard in it is dismissed. Any thoughts?Thanks

When receiving or dialing a call, the green (answer) and red (decline) icons appear blurry, and there is a black screen overlay around the icons. This makes it difficult to interact with the call interface properly.

Does anyone know if Apple is addressing the issue with buttons. They break the fundamental clarity stressed by Human guidelines by exposing an area around an element that is to be tapped. If that area is then defined as a part of the button it should by default then respond to the tap. But it doesn't. My app when you tap on those elements before Liquid Glass ALWAYS RESPONDS. With Liquid Glass, a glancing tap will get the requisite reaction but doesn't trigger the event it should. Also it's confusing that Liquid Glass but not a show stopper that Liquid Glass elements that are disabled respond by flashing at all instead being visible/inert even though nothing happens. It's unnecessary and confusing eye candy. How did the folly of this get passed Apple's UI team and when is it gonna be rectified. I've tried a number of ways to fix it and it just makes the buttons look like crap and then they become more opaque and stuff. Does anyone have a fix for this or is anyone aware of when a fix for this will be released as a part of an OS update? It could be as simple as a setting that defaults to on that says the area/circumference of the circle button (that you NEVER asked for) fully responds to touch events of the target area and it should default to YES!!

Existing smartphones store multiple NFC card information. When the NFC antenna of the phone is close to the card reader, it is usually necessary to open the APP to select NFC card information or default to one card information to be transmitted to the card reader. It is not possible to quickly select or switch cards among multiple cards. For example, after using the NFC function to swipe the subway card, the phone needs to open the car access control and community access control again. It is necessary to open the mobile NFC card information management APP to select the community access control card and then swipe the mobile NFC access control, which causes inconvenience. （现有的智能手机存储多个 NFC 卡信息。当手机的NFC天线靠近读卡器时，通常需要打开APP选择NFC卡信息或默认一个卡信息传输到读卡器。无法在多张卡之间快速选择或切换卡。例如，使用NFC功能刷完地铁卡后，手机需要重新打开车内门禁和小区门禁。需要打开手机NFC卡信息管理APP选择社区门禁卡，然后刷手机NFC门禁，造成不便。） Divide the smartphone screen into multiple areas, and users can freely define corresponding NFC information for each area. When the screen is turned off and not unlocked, select NFC card information by pressing different screen areas with your fingers. When the mobile NFC is close to the card reader, the selected card information will be transmitted to the reader(将智能手机屏幕划分多个区域，每个区域手机用户可以自由定义对应NFC信息。在熄屏’不解锁的情况下，通过手指按压不同屏幕区域选择NFC卡片信息，手机NFC贴近读卡器时将选择的卡片信息传递给读卡器。) Below, the method will be further explained in conjunction with the accompanying drawings and embodiments. Figure 1 is a schematic diagram of a utility model; Figure 2 is the flowchart of the present utility model; NFC reader, 2. Mobile screen partition, 3. NFC signal in Figure 1. In Figure 2, 1. Press the area of the screen partition with your finger. 2. Place the phone close to the NFC reader. 3. The phone senses the returned NFC signal. 4. The phone detects the pressed area.（ 下面结合附图和实施例对方法进一步说明。 图1为实用新型示意图； 图2为本实用新型流程图； 图1中1.NFC读取器，2.手机屏幕分区，3.NFC信号。 图2中1.手指按压屏幕分区的区域2.手机贴近NFC读取器3.手机感应到返回的NFC信号4.手机检测到按压的区域，5.是否检测到手机用户按压区域的动作，6.检测到按压区域，根据按压区域做出匹配相对应的NFC的动作7.选择用户所需的NFC卡8.NFC卡收到信息并发出卡片信息9.NFC读卡器收到NFC卡的信息。） For example, a smartphone user has N NFC virtual cards in their phone. Users can divide the smartphone screen into N areas, distinguished as A area, B area, C area..., each area controls different NFC. When a smartphone user holds down the B area that controls NFC (such as virtual access cards) and brings the phone close to the NFC card reader (such as access control). The mobile phone will sense NFC signals (access control signals), triggering the phone to detect the area that the user is pressing. There are two possibilities. Firstly, if the user's pressing action is not detected, the NFC card corresponding to the default A zone (set as the default here) will be selected. If the user's pressing action is detected and it is detected that the pressing is in Zone B (the partition corresponding to the access card), then the NFC information corresponding to Zone B is triggered. The smartphone receives this message, and the corresponding NFC sends out a card message. The NFC card reader (access control device) receives the message and reacts (door opens).（例如，一智能手机用户手机中有N个NFC虚拟卡。用户可以将智能手机屏幕分为N个区域，分辨为A区、B区、C区······，每个区域分别控制不同的NFC。当智能手机用户按住控制NFC（如虚拟门禁卡）的B区域并将手机靠近NFC读卡器（如门禁）。手机将会感应到NFC信号（门禁信号），触发手机检测用户正在按压的区域。有两种可能性，第一没有检测到用户的按压动作则选择默认的A区（这里把A区设为默认）所对应的NFC卡。第二检测到用户的按压动作并检测出按压的是B区域（门禁卡所对应的分区），则触发B区域所对应的NFC信息。智能手机收到此信息，相对应的NFC发出卡片信息，NFC读卡器（门禁设备）收到信息，做出反应（门打开）。） 图1 image1 图2 image2

Hi everyone, I’m currently testing iOS 26 on my iPhone as part of the developer program. According to Apple’s documentation and demo materials, a new screenshot animation was introduced in this version. However, when I take a screenshot on my device, the animation remains the same as in previous iOS versions. I’ve double-checked that I’m running the correct build of iOS 26, and I haven’t found any settings that might enable or disable this feature. Is anyone else experiencing the same issue? Could this new animation be device-specific, region-limited, or require additional configuration? Any insight would be appreciated! Thanks in advance, Alonso Rivera

As the title indicates the problem, the large title is shown but the small title in Navitation Bar view is not shown when scrolled up with iOS26 beta7. It works with iOS18 or earlier. Is this iOS26 bug?

I want to know if the program written in C language can be implemented through the software package, write a software package containing C language on Xcode, and then apply it in Swift Playground.

I've noticed that the App Store app tends to make the selected tab indicator darker on light mode and lighter on dark mode. Is there any easy way to ensure better legibility out of the box with Tab View (SwiftUI) when using the tint modifier with custom colors?

I'm coding an iPhone app using Swift and I'm getting this scoping error. Attached.

Hi everyone, I’m new to macOS development and working on an app idea that needs a timeline-based editor interface, similar to what you see in Logic Pro or Final Cut. The UI I want to build would have: A horizontal beat ruler that follows BPM and shows beat positions Several vertical tracks stacked below it (for things like events or markers) Horizontal zooming and scrolling A preview panel on the right side that stays in sync with the timeline I’m currently trying this in SwiftUI, but I’m running into some limitations and wondering if AppKit would be a better fit, or maybe a hybrid of the two. My questions: Where should I start when building something like this? What’s the best way to make the beat ruler and all track layers scroll together? How should I handle zooming in/out and syncing the display to a BPM timeline? Is there a clean way to integrate AppKit for the timeline view while keeping SwiftUI elsewhere?

I use swiftui to build apps on iPhone and iPad. There is no problem with the iPhone app. The game display is fully shown on iPhone. However, for the iPad, the game display is not shown and the screen goes black. I had to tap the button on the upper left side.(looks like a side view button) After that, the game display is only shown in the left side in a very small size. How can I make the game display fully shown in the iPad?

I am requesting a dedicated toggle in Settings > Display & Brightness (or Accessibility) to enable/disable the Liquid Glass UI effects so that I am able to get frosted glass thingy effect that was in iOS 18 back.

I've been beating my head against the wall over a scrollview issue where the top and bottom are cut off in landscape mode. Portrait mode - everything runs swimmingly. The moment I flip the iPad on its side, though, I lose about a quarter of the view on the top and bottom. I thought this was something to do with framing or such; I ran through a myriad of frame, padding, spacer, geometry...I set it static, I set it to dynamically grow, I even created algorithms to try to figure out how to set things to the individual device. Eventually, I separated the tablet and phone views as was suggested here and on the Apple dev forums. That's when I started playing around with the background image. Right now I have.... ZStack { Image("background") .resizable() .scaledToFill() .ignoresSafeArea() ScrollView { VStack(spacing: 24) {.... The problem is the "scaledToFill". In essence, whenever THAT is in the code, the vertical scrollview goes wonky in landscape mode. It, in essence, thinks that it has much more room at the top and the bottom because the background image has been extended at top and bottom to fill the wider screen of the iPad in landscape orientation. Is there any way to get around this issue? The desired behavior is pretty straightforward - the background image fills the entire background, no white bars or such, and the view scrolls against it.