Hello All, I am currently developing a mobile management system using declarative management and for the most part it is pretty great. There is one consistent issue I have run into and it comes when testing VPP app installs with not enough licenses. When my server detects that it can't provide a license ID it will return a 404, which causes the rest of the DM syncing to stop, and the activation to throw an error. Per the documentation for using simple activation: An array of strings that specify the identifiers of configurations to install. A failure to install one of the configurations doesn’t prevent other configurations from installing The above would imply that if a config fails it should not affect anything else (aside from possibly reporting an error. Am I returning the wrong error code for it to continue or is the behavior correct and the documentation is wrong? Any additional info would be useful

short version question: why some users after deleting and downloading back my in-house app, cannot start the new process for approving developer, but instead it tries to start and then crashes immediately? long question version I am maintaining an in-house distributed enterprise app. due to update in iOS 18 update here users need to trust the developer via a new procedure that involves restarting device and inserting the phone code. after thousands (more or less 30.000) of users with no issue at all, some of them has this problem, the old (expired)trust seems to be persistent and never updated. Standard events a user deletes the app via settings > general > VPN & device management or via classic persistent touch procedure checks no other presence of the app is on the device via spotlight. since it is the only app with "MyDeveloperName" on the phone, if users goe back to VPN & device management screen, no app or developer will be present. user downloads new version of the app. If taps directly on the icon there is a system alert with says the developer must be trusted. a this point in settings > general > VPN & device management you can find a line with developer name, tapping on it we find a screen where user finds a white button with BLUE message "authorize MyDeveloperName" and follows procedure. My issue is that some users get following different behavior, and I do not understand why: ❌ tapping on downloaded app icon: no alert, but app tries to start then crashes. ❌ going in VPN & device management screen there is only RED write button "delete app" in both paths, working and not working, the app results "verified" in VPN & device management screen (Apple says old authorizations are preserved.)

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you

Hello, We are working with an iOS app that is distributed as a Public Unlisted App Store app. Our MDM allows us to import the app by URL, but when added this way, the app is marked as unmanaged in the inventory. Because of that, we cannot assign a Managed App Configuration payload to it in the normal way. What we are trying to achieve: Deliver a configuration profile to all enrolled devices before the app is installed. When the user installs the app from the MDM catalog, the app should immediately see the configuration values. Questions we’re hoping to clarify: Is it technically feasible to pre-provision a Managed App Configuration for an app in this scenario, by pushing a .mobileconfig profile to all devices? If yes, what would be the correct payload format and content of such a .mobileconfig file? We’ve tested a profile format we found here that uses com.apple.managed-app-config PayloadType and a ManagedAppConfiguration key with the bundle ID nested inside, but iOS reports this as “payload not recognized.” From what we understand, that may not be part of Apple’s schema. Any guidance from Apple or the community on whether this use case is possible (and, if so, what the valid profile format should look like) would be very helpful. Note: For a complicated company policy, at the moment we are not able to participate in ABM. Thanks in advance!

Hi, My client has already developed an ios app and they need an enterprise account to publish the app. What are the procedures to create enterprise account?

When an iOS 26.0 device is prepared in supervised mode, wifi connection screen is showing when the device is restarted. This wifi connect appears always on restart. I have tried using Apple Configurator GUI and Command line (cfgutil) command. In both cases, The behavior Wifi screen is showing up on restart for supervised mode. Cfgutil command: cfgutil -C {Certificate} -K {Key} prepare --supervised --name {NAME} --host-cert {Certificate} --skip-all Note: In non-supervised mode and other iOS, the wifi screen is not showing. Apple Configurator version: 2.18 iOS version: 26.0 Device model: iPhone 11 and above. Anyone else facing this issue? Any help is super appreciated.

"If your app includes any links outside the app, or offers any in-app or other purchasing opportunities, make sure these are behind a parental gate" Super Awesome and Kidoz are proving with a parental gate on ad click and they also claim that all ads are manually approved (another criteria for ads in Kids apps). So these two are the only ad networks we can use moving forward. Or we can use ad networks like Admob as well? I dont intend not to be in Kids category - so leaving Kids category is not a choice.

Hello All, I am currently attempting to get application config working with enterprise apps but it seems as though the asset config is not applying at all. While the asset and application install correctly it does not seem that the config is read at all judging from the status message returned. "StatusItems" : { "app" : { "managed" : { "list" : [ { "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } }, "identifier" : "app.identifier", "version" : "3.2", "short-version" : "3.2.0", "state" : "managed", "declaration-identifier" : "dec-identifier" } ] } } }, "Errors" : [ ] } The asset file being sent down is as follows: <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Config 1</key> <string>Value 1</string> <key>Config 2</key> <string>Value 2</string> <key>Config 3</key> <string>Value 3</string> </dict> </plist> This is the config report being sent back by the device after everything has been fetched: "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "group.activation.payload", "valid" : "valid", "server-token" : "56792E4AE25C3286640B45E6BD265AE97545B2B87F90A6355919FD8B2E3C3AB3" } ], "configurations" : [ { "active" : true, "identifier" : "app.install", "valid" : "valid", "server-token" : "34D7ACECAE16EE9EEAC0630FF2FF85524FFBB5BA3CB18CFB6296FBC860368C85" }, { "active" : true, "identifier" : "ios.policy.subscription.list", "valid" : "valid", "server-token" : "376913E11BE7D26EC745B3B68C6FA94C4FC061B1B736D143EBE0F12FF73ADFF8" } ], "assets" : [ { "active" : true, "identifier" : "app.config.reference", "valid" : "valid", "server-token" : "1CFBE30EB56309005F742D667B80242E6A3CDC08ED228D0BC5F87749C6BBAB77" } ], "management" : [ ] } }, "app" : { "managed" : { "list" : [ { "state" : "downloading", "declaration-identifier" : "app.install", "identifier" : "app.identifier", "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } } } ] } } }, "Errors" : [ ] } Additional info would be useful, though a sysdiagnosis will be submitted to feedback as well. Config did apply correctly when sending down through Install application command

I created a provisional profile from apple developer portal for my iOS app. The expiry date shown in the profile is 21-April 2026. However, when I build the app with this provisional profile the expiry date shown in the app is 11 Dec, 2025. My iOS distribution certificate expires only in November 2026. I see a embeded.mobileprovision profile inside the app, and it has an expiry of 11-Dec-2025. I did a clean build,, cleared unnecessary profiles from profile folder, created a new provisional profile and tried, but nothing seems help. We have a few apps, and no other app has this issue. We do annual release of all apps together for provisional profile renewal. As this app expiry is different, it will cause lot of difficulty for us next year. Will you please help me to resolve this issue? Thanks.

Hello, We're testing the new allowedExternalIntelligenceWorkspaceIDs key in the MDM Restrictions payload on supervised iPads. According to Apple's documentation, this key expects an "external integration workspace ID", but it's not clear what this specifically refers to. We've tried the following IDs individually (one at a time, as documentation says only one is supported currently): OpenAI Organization ID ChatGPT user email Apple ID used in ChatGPT Google ID used in ChatGPT login The profile installs correctly via MDM and the key is set, but we want to confirm: What exactly is considered a valid "external integration workspace ID" for this key? Is there a way to verify that the restriction is working as intended on the device (e.g. does it limit specific integrations or apps)? Is there an official list of services that currently support this? Any clarification from Apple or other developers with experience on this would be very helpful. Thanks in advance.

Hello, we use an MDM profile that enables FDA for our program. The Identifier is set to be the path to our program. We'd like to have a profile that allows multiple CodeSignatures. Our older programs are signed with a different certificate than the current ones. We tried deploying 2 profiles (one for the 'old certificate' signed binary and the other for the 'new certificate' signed binary). But it looks like that MacOS accepts only one. I have also tried to use ProfileCreator to generate a profile with 2 entries, but it fails to do it. Manually editing the XML file and adding new entries does not work either. I'd like to know if there's a workaround for this issue.

I am needing to access the ABM API via C#. Searching has directed me to use BouncyCastle. I have downloaded the PEM file. However, using the following: using (var reader = File.OpenText(pemFilePath)) { var pemReader = new PemReader(reader); var keyObject = pemReader.ReadObject(); I get the error "problem creating EC private key: System.NullReferenceException: Object reference not set to an instance of an object."

There is a longstanding restriction payload for supervised iOS devices that disables "Erase All Content and Settings." We have been experimenting with supervised watches paired with supervised phones that have that payload applied, and yet "Erase All Content and Settings" remains available on the watch. Is this: – a) An error with our payload? Should we be sending something else? – b) A bug in watchOS supervision? – c) A deliberate design choice? If so, what is the rationale for preventing organizations from maintaining this very basic level of control over devices they may be configuring and dispatching into the field?

Is there any mechanism to restrict camera usage on a user-owned device, once they have opted in, consented to the restriction, and installed a management profile? Documentation suggests it was possible with allowCamera, but has be deprecated on unsupervised devices. Am I understanding correctly that it's simply not possible anymore unless the device is supervised?

We are currently working on a SCEP server implementation that operates in FIPS-approved mode. In this mode, RSA PKCS#1 v1.5 encryption is disallowed due to compliance requirements, and only FIPS-approved padding schemes such as RSA-OAEP are permitted. However, we have observed that the SCEP client functionality on Apple devices currently does not support RSA-OAEP for CMS EnvelopedData decryption. This creates a challenge for us in ensuring FIPS compliance while maintaining compatibility with Apple devices during certificate enrollment through SCEP. We would appreciate your guidance on the following: Are there any alternative FIPS-approved encryption algorithms or configurations supported by Apple devices for SCEP CMS EnvelopedData decryption? Is there any plan or timeline for future support of RSA-OAEP on Apple platforms for this use case? Feedback raised along with sysdiagnose logs as well : FB17655410

Hi, I was looking for advice on the suitable mac to get for a web app development project for university . Would an Apple MacBook Air 2020 M1 8GB RAM 256GB SSD 13.3" macOS Big Sur, be sufficient ?? Or would I need a newer version !

Hello, I have implemented my virtual meeting extension and my application shows no issues in the calendar application, with a join button displayed. Everything is great!. However, with the help of EKEventEditViewController and EKEvent instances, when creating an event from the main target of the application using EventKitUI, the event will not be displayed as a virtual meeting. I have seen that other applications like Zoom have already implemented this, and I find it difficult to find relevant documentation on how to link events created by the program to virtual meetings. How do I set an event as a meeting when I want to add it to the main program? In addition, the function in the VirtualConferenceProvider.swift file of the extension program fetchVirtualConference(identifier: EKVirtualConferenceRoomTypeIdentifier, completionHandler: @escaping (EKVirtualConferenceDescriptor?, (any Error)? ）->Void) How are the parameters in this function obtained? It's impossible for every conference related link to be the same

Hello All, I come to ask a question that I haven't been able to find the docs. I continue to work on implementing declarative management and while working there is a question/concern I have. I have noticed that during some destructive testing, if the device is attempting to fetch a configuration and the server responds with a 503 (or any server related error) then the device will wipe all configurations and attempt to reapply them. Is there any way to prevent this by intercepting status codes or would the only real solution be to force down a temp/test config if the real config can't be fetched from the server?

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?