Three months ago I molded a mold program. I believe could be tweaked and tried unlined zero code. swear. anyway I would like to scale with some people if I can go to commercial area code phoned series and calls.and if I have rights. but my next moves for them. on iOS I think they should have a seri settings. where they can call seri.on settings, and it jump many codes-and navigation is hard. plus I think seri can help in settings expecially since seri settings is verbal drop. if the words fit or are similar it cues goes to but you have to hard call the switch.so there’s no hey no Sami where you setting no Sammy right I think it could skip cauldron and everything verbally either. Seri settings I think iOS should try it.

Recently, we have encountered some users who have been unable to open the enterprise signature application after upgrading to version 18.3.2, without an IPS file. Through system logs, we found that signature verification has occurred SecKeyVerifySignature failed: Error Domain=NSOSStatusErrorDomain Code=-50 "rsa_pub_crypt failed, ccerr=-7" UserInfo={numberOfErrorsDeep=0, NSDescription=rsa_pub_crypt failed, ccerr=-7} Waiting for the information, I will provide the obtained system logs below. The application package name that crashed is com. mobile. moonew

I have enrolled a macbook through ADE to Apple School Manager and register it to the MDM service. Upon sending the initial DeclarativeManagement payload, the device return the client capabilities as below: "supported-versions": [ "1.0.0" ], "supported-payloads": { "declarations": { "activations": [ "com.apple.activation.simple" ], "assets": [ "com.apple.asset.credential.acme", "com.apple.asset.credential.certificate", "com.apple.asset.credential.identity", "com.apple.asset.credential.scep", "com.apple.asset.credential.userpassword", "com.apple.asset.data", "com.apple.asset.useridentity" ], "configurations": [ "com.apple.configuration.account.caldav", "com.apple.configuration.account.carddav", "com.apple.configuration.account.exchange", "com.apple.configuration.account.google", "com.apple.configuration.account.ldap", "com.apple.configuration.account.mail", "com.apple.configuration.account.subscribed-calendar", "com.apple.configuration.legacy", "com.apple.configuration.legacy.interactive", "com.apple.configuration.management.status-subscriptions", "com.apple.configuration.management.test", "com.apple.configuration.math.settings", "com.apple.configuration.passcode.settings", "com.apple.configuration.safari.extensions.settings", "com.apple.configuration.screensharing.connection", "com.apple.configuration.screensharing.connection.group", "com.apple.configuration.security.certificate", "com.apple.configuration.security.identity", "com.apple.configuration.security.passkey.attestation" ], "management": [ "com.apple.management.organization-info", "com.apple.management.properties", "com.apple.management.server-capabilities" ] }, "status-items": [ "account.list.caldav", "account.list.carddav", "account.list.exchange", "account.list.google", "account.list.ldap", "account.list.mail.incoming", "account.list.mail.outgoing", "account.list.subscribed-calendar", "device.identifier.serial-number", "device.identifier.udid", "device.model.family", "device.model.identifier", "device.model.marketing-name", "device.model.number", "device.operating-system.build-version", "device.operating-system.family", "device.operating-system.marketing-name", "device.operating-system.supplemental.build-version", "device.operating-system.supplemental.extra-version", "device.operating-system.version", "management.client-capabilities", "management.declarations", "screensharing.connection.group.unresolved-connection", "security.certificate.list", "test.array-value", "test.boolean-value", "test.dictionary-value", "test.error-value", "test.integer-value", "test.real-value", "test.string-value" ] }, "supported-features": { } } }, com.apple.configuration.softwareupdate.enforcement.specific couldn't be found. The macbook current OS version is 15.5 and it's supervised so looking at this, I assume it should include the Software Update:Enforcement:Specific capability? https://github.com/apple/device-management/blob/release/declarative/declarations/configurations/softwareupdate.enforcement.specific.yaml When I tried sending the payload to the device anyway the valid status is unknown

We have an office application used internally within our enterprise. The Provisioning Profiles (PP) for the app were about to expire, so we updated the PP and released a new version. However, we've encountered an issue where some users did not update their phones in time. After the app expired, they found it unusable and downloaded the new version, but the newly downloaded app also crashes on launch. Restarting the phone does not resolve the issue, and this primarily occurs on iOS 18.3.2. What could be the cause of this problem, and how should we address it?

Hi everyone, I’m working as an IT engineer in the cruise industry and need to troubleshoot passenger complaints about Apple’s new RCS messaging feature (introduced with iOS 18). Could someone help confirm which domains and ports iPhones use when they send RCS messages? For the fortigate and palo alto firewalls I need specifics: domains (or subdomains) that need whitelisting and the ports involved. Any official or community-sourced info would be super helpful—thanks in advance!

I have created a configuration profile which basically just turns off notifications for Shortcuts app but I am unable to install it on my iPhone as I am getting the following error “This profile can be installed on a supervised device only” can someone please help me with this? Would also appreciate if you have another way to turn off shortcuts notifications permanently since when I turn it off via screen time it keeps turning itself ON every couple of days.

Hi Apple team and community, We’re currently integrating with the Apps and Books for Organizations API as part of our device management solution and would like to highlight a few critical points we've encountered — including a reliability issue, an enhancement suggestion, and a request for clarification on API rate limits. 1. Issue: Intermittent 403 Errors with stoken-authenticated-apps Endpoint We are encountering intermittent 403 Forbidden responses from the stoken-authenticated-apps endpoint. Approximately 30–35% of the requests fail with a 403 status code. These failures are inconsistent — the same request (using the same Content Token and Storefront) may succeed upon retry. All requests are properly authenticated and include the required Cookie and other headers as specified in the API documentation. This issue is impacting our ability to reliably fetch app metadata at scale, particularly in workflows. We’d like to know: Is this a known issue? Could it be due to a rate limit or token misconfiguration? Are any changes required on our end to avoid these failures? 2. Enhancement Request: Include externalVersionId in versionHistory Response The versionHistory extension currently returns: versionString releaseNotes releaseDate However, for Declarative Device Management (DDM) workflows such as App Pinning, we need the externalVersionId as well. Without it, we can't reliably correlate version metadata with the specific version ID required for pinning. Adding externalVersionId would: Enable precise version targeting during App Pinning Improve reliability and automation in managed deployments We request that Apple consider including externalVersionId in the versionHistory response to better support DDM-based app lifecycle management. 3. Rate Limit Clarification We found the following note in the Apps and Books for Organizations API documentation: "The Apps and Books for Organizations API limits the number of requests your app can make using a developer token within a specific period of time. If you exceed this limit, you’ll temporarily receive 429 Too Many Requests error responses for requests that use the token. This error resolves itself shortly after the request rate has reduced." While this confirms that a rate limit is enforced, there is no detailed information about the thresholds — such as the number of allowed requests per minute, hour, or day per developer token. To help us implement proper throttling and retry strategies, we request clarification on the following: What is the exact rate limit threshold per developer token? Are there per-endpoint limits, or is it a global cap for all requests using the token? Does the API return a Retry-After header when the limit is exceeded? What is the recommended backoff strategy for clients to follow when receiving 429 errors? This information would help us implement efficient throttling and error handling logic. Any insights from the Apple team or other developers who’ve encountered these issues would be greatly appreciated!

how to contact 酷

We are implementing the Return to Service (RTS) with App Preservation flow. During testing, we were able to successfully fetch the Bootstrap Token as part of the ADE enrollment process. However, when attempting to initiate the Return to Service command with App Preservation enabled, the following error was returned: [ { "ErrorCode": 12089, "ErrorDomain": "MDMErrorDomain", "LocalizedDescription": "Could not erase device.", "USEnglishDescription": "Could not erase device." }, { "ErrorCode": 66002, "ErrorDomain": "MDMBootstrapTokenErrorDomain", "LocalizedDescription": "Failed to generate LAContext for bootstrap token", "USEnglishDescription": "Failed to generate LAContext for bootstrap token" } ] Below is the sample request (with dummy data). The actual request contained valid values in all fields: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>RequestType</key> <string>EraseDevice</string> <key>ReturnToService</key> <dict> <key>Enabled</key> <true /> <key>WiFiProfileData</key> <data>WiFiProfileData</data> <key>BootstrapToken</key> <data>BootstrapTokenValue</data> <key>MDMProfileData</key> <data>MDM Profile Data</data> </dict> </dict> <key>CommandUUID</key> <string>3670</string> </dict> </plist>

We are currently working on a SCEP server implementation that operates in FIPS-approved mode. In this mode, RSA PKCS#1 v1.5 encryption is disallowed due to compliance requirements, and only FIPS-approved padding schemes such as RSA-OAEP are permitted. However, we have observed that the SCEP client functionality on Apple devices currently does not support RSA-OAEP for CMS EnvelopedData decryption. This creates a challenge for us in ensuring FIPS compliance while maintaining compatibility with Apple devices during certificate enrollment through SCEP. We would appreciate your guidance on the following: Are there any alternative FIPS-approved encryption algorithms or configurations supported by Apple devices for SCEP CMS EnvelopedData decryption? Is there any plan or timeline for future support of RSA-OAEP on Apple platforms for this use case? Feedback raised along with sysdiagnose logs as well : FB17655410

Finally got to the stage where the ACME certificate profile is successfully installed. However, the public key/certificate itself isn't appearing in the System Keychain. I'm not sure if this is normal or if it's an indication that something went wrong after the profile installation. Unfortunately, I didn't study the log detail at the time and I'm uncertain of how to retrieve those logs from two days ago for the ACME activities. Can anyone confirm that macOS 26 should be storing ACME-retrieved MDM profile-based certificates in the System Keychain? If they should be there, what can possibly go wrong? The most obvious issue I can see is that the ACME server has requested the certificate with two CN's, which comes from the MDM profile asking for the subject against CN and the OID (2.5.4.3). Both CN's are identical. I'm surprised the profile installed if something is wrong. At first, I assumed Apple had decided to stop installing the certificates into the System Keychain.

Hello, We have an internal enterprise app. After the provisioning profile (certificate) expired, some employees' iPhones still retained the old certificate when updating the app, causing the app to fail to open. We’ve tried restarting and reinstalling the app, but the issue persists. Having each employee manually reset network or device settings would be too operationally costly. Since this involves a large number of devices, we cannot use Apple Configurator to remove and reinstall certificates one by one. Therefore, we’d like to ask if there is a more efficient, batch-oriented solution to quickly resolve the certificate residue issue. We’d appreciate any suggestions for large-scale deployment methods. Thank you very much!

I have a simple organization-info declaration that contains the following: "Identifier": "com.example.declaration.org-info", "Payload": { "Email": "info@example.com", "Name": "Example Organization Info", "URL": "http://example.com" }, "ServerToken": "c23b40ca47b11420", "Type": "com.apple.management.organization-info" } And an activation that includes the org-info declaration: "Identifier": "com.example.activation.org-info", "Payload": { "StandardConfigurations": [ "com.example.declaration.org-info" ] }, "ServerToken": "5f6c37a6a0c44e35", "Type": "com.apple.activation.simple" } When I check the status of the declaration, I see the following error: "StatusItems": { "management": { "declarations": { "activations": [ { "reasons": [ { "details": { "Identifier": "com.example.activation.org-info", "ServerToken": "5f6c37a6a0c44e35", "ConfigurationIdentifiers": "com.example.declaration.org-info" }, "description": "Activation (com.example.activation.org-info:5f6c37a6a0c44e35) is missing configurations.", "code": "Error.MissingConfigurations" } ], "active": false, "identifier": "com.example.activation.org-info", "valid": "valid", "server-token": "5f6c37a6a0c44e35" } ], "configurations": [], "assets": [], "management": [ { "active": false, "identifier": "com.example.declaration.org-info", "valid": "valid", "server-token": "542fded47e432de3" } ] } } }, "Errors": [] } I'm not seeing the error in either the activation or the declaration that might throw this error. Does anyone have any insight?

Hello, I am running into a bit of an issue with the Screen Timeout/Screen Lock setting and would like some clarification on. First for a bit of context, I am enrolling personal iOS devices 18.0+ into the company MDM (Intune) with Account Driven User Enrollment. We are trying to set a screen timeout of 5 minutes and immediately after it asks for the passcode on the device, though this setting is not being applied and the device timeout setting can be set as "Never" on the user's end. This is a big security risk for the company I work for and and the issue with being HIPAA compliant. According to the Microsoft Intune Support, "In iOS 18, when using Account-Driven User Enrollment for BYOD (Bring Your Own Device) scenarios, the screen lock timeout setting is indeed marked as “Not Applicable”. This is because Apple’s privacy-preserving model for personal devices restricts administrative control over system-level settings like screen lock or idle timeout." I am needing clarification on the item mentioned from Microsoft Intune Support and if this setting is no longer able to be applied from the MDM with devices enrolled with Account Driven User Enrollment?

Issue Using the DeviceInformationCommand API, the following device information can no longer be retrieved on iOS/iPadOS 26 and later. IMEI ICCID PhoneNumber This issue does not occur on devices running iOS/iPadOS 18.x or earlier. We would appreciate it if you could advise us on a solution to enable the retrieval of this information. Request XML <?xml version=\"1.0\" encoding=\"UTF-8\"?> <!DOCTYPE plist PUBLIC \"-//Apple//DTD PLIST 1.0//EN\" \"http://www.apple.com/DTDs/PropertyList-1.0.dtd\"> <plist version=\"1.0\"> <dict> <key>CommandUUID</key> <string><!-- Here is CommandUUID --></string> <key>Command</key> <dict> <key>RequestType</key> <string>DeviceInformation</string> <key>Queries</key> <array> <string>IMEI</string> <string>ICCID</string> <string>PhoneNumber</string> </array> </dict> </dict> </plist>

What is the proper payload for the FDEFileVault? Do I need to provide a user password in the payload to proceed with turning on the FileVault? Isn't that a privacy issue? Why UserEntersMissingInfo does not work for me? How to properly turn off FileVault - every try failed? Below I attach tested payloads and results. Test 1: Enable: "On" Result 1: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 2: Enable: "On" Username: "username on a device" Result 2: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 3: Enable: "On" Username: "username on a device" Password: "password of the user" Result 3: Success: FileVault turned On Test 4: After previously turning On FileVault successfully after restarting a machine. Enable: "Off" Result 4: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 5: Enable: "On" UserEntersMissingInfo: True Result 5: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 6: Enable: "On" Username: "username on a device" UserEntersMissingInfo: True Result 6: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 7: This is example payload from: https://developer.apple.com/documentation/devicemanagement/fdefilevault#Profile-Example Defer: True Enable: "On" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: False Result 7: Success: FileVault turned On Test 8: Same as test 4, but after turning on like test 7. Test 9: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: False Result 9: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 10: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: True Result 10: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 11: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: True DeferForceAtUserLoginMaxBypassAttempts: 0 Result 11: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 12: UserEntersMissingInfo: True Enable: "Off" Username: "username on a device" Result 12: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help.

On google it's showing with in 24 for developer enrollment now waiting for 4th day no update at all

Apple face app is used to fore video calling and chatting and voice calling AP same a what’s app tango etc…

Is a student from a postgraduate course eligible to participate in the Apple Swift Student Challenge?

Is there a way to restrict an end user from potentially editing a supervised device through Apple Configurator? It seems that Apple Configurator allows to make undesirable changes to a supervised device, like removing profiles, which would in turn be detrimental to the intended experience on the device, if a user would actually be able to perform such changes.