Hello, I am developing a calling service using CallKit and VOIP push. I have occasionally encountered a strange issue. The issue is that VOIP permanently fails to receive calls. I was previously informed that even if the device is blocked, it can receive calls again after 24 hours. Also, when I checked the device logic, it complied with the policy requirements set by Apple, including correctly calling CallKit's reportNewIncomingCall method. Once the issue occurs, no matter how many times I try, VOIP does not receive calls, and neither a device reboot nor checking the Device Console Log shows any logs related to CallKit or VOIP. I suspect this might be an issue with the VOIP token, and I believe that the only way to get a new one is to reinstall the app. Is that correct? Of course, after reinstalling, it works fine again, but this is very inconvenient. I don't think this is the right solution. Is there anyone who can share their insights on this issue? Thank you.

We are currently developing a WebAPI service that uses APNs (HTTP/2) to send push notifications to iOS devices. (Using PushSharp's HTTP/2 support) The WebAPI service is running on IIS using .net framework 4.8 and c#. The connection to APNs is always maintained, and the connection is checked every 30 minutes using a dummy token Ping. KeepAlivePeriod = 30 minutes and KeepAliveRetryPeriod = 10 seconds have also been set. However, the following issues are occurring. Although the Ping sent immediately before was successful, a TimeoutException occurs in the notification request sent a few minutes later. There is no explicit disconnection notification from APNs, and the connection appears to be silently disconnected. Once a TimeoutException occurs, it occurs frequently afterwards. Below is an excerpt from the log. Apple Notification Failed for some unknown reason 1-1: One or more errors occurred. Apple Notification Failed for some unknown reason 1-2:System.TimeoutException: The operation timed out. In light of this issue, I would like to be advised on the following two points. Are there any official specifications regarding the lifecycle and expiration date of APNs HTTP/2 connections? Even if pings are sent periodically, is there a timeout or other setting that disables the connection on the APNs side? What are the conditions that would cause APNs to silently terminate a connection? For example, could this be due to inactivity, TLS restrictions, network maintenance, etc.? If you have any official documentation or technical guidelines to improve the reliability of this system, we would appreciate it if you could share them with us. Thank you in advance.

Hello, We are trying to implement Actionable Notifications on iOS via Remote Notifications. According to Apple’s official documentation (Declaring Your Actionable Notification Types), it is recommended to register notification categories at launch time. However, in our use case, the number of buttons and their actions in the Actionable Notification are determined at the time of the Remote Notification request. This means that we cannot predefine the categories at app launch but need to dynamically configure them based on the payload of the Remote Notification. Our Approach We are considering setting aps.mutable-content = 1 and using Notification Service Extension to modify the categoryIdentifier dynamically. Below is the JSON payload we plan to use for Remote Notifications: { "aps": { "alert": { "title": "New Message Received!", "body": "Check out the details." }, "category": "DYNAMIC_CATEGORY", "mutable-content": 1 }, "categoryData": { "id": "DYNAMIC_CATEGORY", "actions": [ { "id": "REPLY_ACTION", "title": "Reply", "options": ["foreground"] }, { "id": "DELETE_ACTION", "title": "Delete", "options": ["destructive"] } ] } } Questions: Can we dynamically configure Actionable Notifications based on the Remote Notification payload? If we set categoryIdentifier in Notification Service Extension’s didReceive(_:withContentHandler:), will users still see the correct action buttons even if the app is terminated? What is the recommended approach to dynamically configure Actionable Notifications at the time of receiving the Remote Notification, rather than at app launch?

When sending a single push notification to iOS 18 devices users receive the same notification multiple times. This issue appears specific to iOS 18 and was not observed in previous iOS versions Our server logs confirm each notification is sent only once. Notification payloads include proper apns-id values for identification and no network issues detected on our side

Dear Apple! During WWDC24 you announced that ONE_TIME_CHARGE notification is available on the sandbox environment and will be available "it will be available in production later this year" - it's March 2025 and there is still no production release of this feature. Could you share some timeline and plans for when we can expect that feature deployed to production? Thanks in advance!

@App Store Commerce Engineer hi, have you already implement something for handle server notification if user buy non consumable purchases product, how my server should know if user boutght something ?

There's plenty of articles out there about programatically grouping push notifications. However I have tried setting the thread-id in the push payload when sending a push, or setting the threadIdentifier for a received push in a notification service extension to be the same for several pushes. But if within the iPhone Settings / Notifications the user selects to display pushes as List and turns off Notification Grouping, then each notification resulting from the push appears on its own separately. Is there something other than thread-id/threadidentifier that is used to programmatically group them? If not then whats the point of these as grouping and display is actually under the control of user.

Does iOS provide a callback when a notification is manually removed from the notification tray ?

I'm strugling about the way how to code notifications for my weather aplication. I use data from my server that receives weather changing values from my own weather station and want to notify user of my app when eg strong wind will blow or temperature go under eg 3℃ etc. The weather station has 8 sensors so there is sometimes a lot of data changing in particular minute that i set to parse data from server and notify user about it. But the notifications only works only when app is on and couple minutes after locking display. So please what could i use strategy for the app to works even when the app sleeps ?

There's a list of bug reports: FB19778882 FB19813796 FB19852724 FB19767262 FB20378888 FB20379383 FB20394663 Me and many other users have issue with push notifications. To reproduce this you should do this steps: Lock iPhone and make it idle for 10+ minutes; Send any message from other device via third-party app that uses push notifications (WhatsApp, Telegram and etc.); After few attempts you can see, that messages don't deliver. They delivers immediately when I unlock iPhone or go to the app. This bug reproduces on iOS 18.7 and 27. As I think iPhone goes to deep sleep after 10+ minutes after it locked and don't get push notifications. I've tried everything: many of settings, DFU without backup, but nothing helps to resolve this issue. Pay attention, please, cause this bug is very annoying and present on iOS 18.7 (that is the last for many devices) and latest iOS 26. Thanks!

I am trying to add voip call functionality to my app. It works as expected while the app is in the foreground. But in the background it does not. I have registered the app as requiring background voip permissions. My implementation doesn't fit into one of these posts, so here is a gist: https://gist.github.com/BrentMifsud/4be43c022c1279f04ecb56250a86b3f1

ISSUE: CloudKit subscriptions are not triggering push notifications despite correct configuration. CloudKit logs show RecordSave events but NO NotificationSend events, indicating CloudKit is not attempting to send to APNS. CONTAINER: iCloud.Wunderkind.StrikeForceApp ENVIRONMENT: Tested in both Development and Production iOS 18.6.x Xcode 15.x (update with your version) Device: iPhone (not simulator) EVIDENCE: Subscriptions exist and are visible in CloudKit Dashboard Records are being created successfully (verified in logs) Device token is registered: 60eb962ff189dc5c2c0ef3e9d6643d72b4442a831bae224d2a553588b2e29139 Local notifications work correctly CloudKit logs show RecordSave but NO NotificationSend events STEPS TAKEN: Regenerated push certificates Disabled and re-enabled Push Notifications capability Deleted and recreated subscriptions Tested in both Development and Production environments Verified aps-environment entitlement matches environment Confirmed notification permissions granted SPECIFIC TEST: Creating a Challenge record with recipientRef matching my user triggers: ✅ RecordSave event in CloudKit logs ❌ No NotificationSend event ❌ No push notification received EXPECTED: CloudKit should send NotificationSend events and deliver push notifications when subscriptions match. ACTUAL: No NotificationSend events appear in CloudKit logs, no notifications delivered.

Good day We developed a simple swift code to make the device ringing when a certain type of notifications arrives from our backend. This is the code: let phoneNumber = CXHandle(type: .generic, value: (self.userInfoForPluginCall!["data"] as! [String:Any]) ["caller"] as! String) callUpdate.remoteHandle = phoneNumber let configuration = CXProviderConfiguration(localizedName: "Trec Conf") configuration.maximumCallGroups = 1 configuration.maximumCallsPerCallGroup = 1 configuration.supportsVideo = false configuration.supportedHandleTypes = [.generic] configuration.iconTemplateImageData = UIImage(named: "callkit-icon")?.pngData() let callProvider = CXProvider(configuration: configuration) callProvider.setDelegate(self, queue: nil) callProvider.reportNewIncomingCall(with: callUUID!, update: callUpdate, completion: {error in}) We are noticing some problems on the call screen: on certain devices (iOS 18.4RC) the normal call screen appears and the user can answer or decline the call, on other devices (iOS 18.3, especially with dynamic island) only a phone icon appears in the upper right corner and no possibility to answer or deny call. Any idea on why we are encountering that behavior? Thanks

Hello, I'am trying to validate a new app from apple. I have configured sandbox url and production url for server to server apple store notification. I have created subscriptions product id, but there are no validated yet by apple. When I upload my app to testflight, I can't test sandbox notification cause the product id are not available, on local xcode with storekit file I got my product Id but I don't receive notification. So my question is how can I test there thing. I have to produce fake product id ? I'm lock its very complex process, I don't understand. I tried to send my app like that for verification but the team told me to use receipt, but its deprecated and notification webhook is better for me. What is the good order, validate my subscription product ID then test ? what is the good steps. Apple seems to don't want validate my subscription product ID I'm lock..

Hi! I am encountering an issue when attempting to send a test notification to update a live activity. The request is failing with the following error: { "code": 400, "message": "bad-request", "reason": "The device token doesn't match the specified topic.", "requestUuid": "3ed3fc0c-9c57-4d67-8ae8-cbabe0579b10" } I have verified that all device tokens and app identifiers are correct, but the error persists. Could you please assist in identifying the root cause of this issue?

We are facing an issue where VoIP notifications are not delivered to a user's device. If we login with the user credentials on another device the VoIP notifications are being received, if he logs in on his device VoIP notifications are not being received anymore on all devices. So When the user logs in on the affected device, all devices on that account stop receiving VoIP pushes (including the affected one). Logging out on the affected device restores delivery to other devices. What could cause this issue? It's only happening for this user so the configuration and mobile app PushKit code is working as intended.

We are attempting to update our app to use the PTT framework, as it has been made clear that this will be required in a future iOS version as opposed to using the Unrestricted VoIP entitlement we are using for several features of our app. However, the behavior of this framework poses some problems with implementing our app's functionality: It is not possible to programmatically join a channel when the app is not in the foreground. This hinders our ability to implement the Automatically activate radio stream feature of our app, which allows users who have opted into this feature to immediately begin hearing live PTT audio from their agency following an incident alert. Having the app constantly "joined to a channel" and using the restoration delegate could potentially work, however this is not ideal as this would result in the PTT UI needing to be displayed at all times, even when no radio stream is activated. We have a "Text to Speech" option that, when enabled, reads out the content of an incident alert after the alert sound has played. This currently happens by triggering an AVSpeechSynthesizer in the PushKit incoming push callback. It may be possible to render TTS audio on the fly in a Notification Service Extension and assign it as the notification's sound, if that is possible this is less of a problem. We also use the PushKit callback to, again if the user has enabled it, activate a "Shake to Respond" feature, allowing a short period of time after receiving an incident alert in which the user can shake their device to indicate that they are responding to the incident. There does not appear to be any way to have the level of background execution required to implement this using an NSE, and this is of course beyond the scope of the PTT framework. What options do we have to be able to continue to provide this functionality, without risk of it being disabled in a future iOS version?

After my membership was renewed (auto-payment was rejected, and my account was manually paid), my app stopped receiving notifications I thought was an invalidation by membership but after some days, my app kept not receiving notifications. I just recreated a new key for my app, (I hope it solves the problem) My question is, do I need to make another change to my account to reenable services?

Hi there, This is my first time posting here. I'm working on small projects on Swift and SwiftUI now and then. I'm currently trying to develop an application that gets some bus arrival data using API and displaying them with live activities. The thing is that I'm not quite sure how frequently updates work yet. Still trying to figure out if I can update the live activity everytime the data coming right from the API changes or use push notification updates each minute passing by, but that is another thread that I'm going to focus with more details. Everytime i'm trying to deploy my app on my iphone or a simulator this error keeps popping up and I can't figure out why. Any ideas? Let me know if you need any snippet of my code. SendProcessControlEvent:toPid: encountered an error: Error Domain=com.apple.dt.deviceprocesscontrolservice Code=8 "Failed to show Widget 'com.gregorikouk.MapKitTut.BusWidgetKit' error: Error Domain=FBSOpenApplicationServiceErrorDomain Code=1 "The request to open "com.apple.springboard" failed." UserInfo={NSLocalizedFailureReason=The request was denied by service delegate (SBMainWorkspace)., BSErrorCodeDescription=RequestDenied, NSUnderlyingError=0xb1282dfe0 {Error Domain=SBAvocadoDebuggingControllerErrorDomain Code=1 "Failed to get descriptors for extensionBundleID (com.gregorikouk.MapKitTut.BusWidgetKit)" UserInfo={NSLocalizedDescription=Failed to get descriptors for extensionBundleID (com.gregorikouk.MapKitTut.BusWidgetKit)}}, FBSOpenApplicationRequestID=0xe5da, NSLocalizedDescription=The request to open "com.apple.springboard" failed.}." UserInfo={NSLocalizedDescription=Failed to show Widget 'com.gregorikouk.MapKitTut.BusWidgetKit' error: Error Domain=FBSOpenApplicationServiceErrorDomain Code=1 "The request to open "com.apple.springboard" failed." UserInfo={NSLocalizedFailureReason=The request was denied by service delegate (SBMainWorkspace)., BSErrorCodeDescription=RequestDenied, NSUnderlyingError=0xb1282dfe0 {Error Domain=SBAvocadoDebuggingControllerErrorDomain Code=1 "Failed to get descriptors for extensionBundleID (com.gregorikouk.MapKitTut.BusWidgetKit)" UserInfo={NSLocalizedDescription=Failed to get descriptors for extensionBundleID (com.gregorikouk.MapKitTut.BusWidgetKit)}}, FBSOpenApplicationRequestID=0xe5da, NSLocalizedDescription=The request to open "com.apple.springboard" failed.}., NSUnderlyingError=0xb1281d830 {Error Domain=FBSOpenApplicationServiceErrorDomain Code=1 "The request to open "com.apple.springboard" failed." UserInfo={NSLocalizedFailureReason=The request was denied by service delegate (SBMainWorkspace)., BSErrorCodeDescription=RequestDenied, NSUnderlyingError=0xb1282dfe0 {Error Domain=SBAvocadoDebuggingControllerErrorDomain Code=1 "Failed to get descriptors for extensionBundleID (com.gregorikouk.MapKitTut.BusWidgetKit)" UserInfo={NSLocalizedDescription=Failed to get descriptors for extensionBundleID (com.gregorikouk.MapKitTut.BusWidgetKit)}}, FBSOpenApplicationRequestID=0xe5da, NSLocalizedDescription=The request to open "com.apple.springboard" failed.}}} Domain: DTXMessage Code: 1 User Info: { DVTErrorCreationDateKey = "2023-10-02 21:06:04 +0000"; } -- System Information macOS Version 14.0 (Build 23A344) Xcode 15.0 (22265) (Build 15A240d) Timestamp: 2023-10-03T00:06:04+03:00

I am using UNCalendarNotificationTrigger and from my initial tests with simulator and timezone changes in my mac i see that notification donot get triggered at specific times if timezone changes, is this expected behaviour ?