Hi all, We encountered an issue where APNs (Apple Push Notification service) push messages cannot be received during development. The specific description is as follows: Our app runs on an iPad that connects to the cellular network using a SIM card and accesses the Internet through the company's MDM, which provides APN setting proxies. During operation, we found that the device fails to receive push messages from APNs. Network packet capture revealed that the connection attempt by apsd to port 5223 failed. According to Apple's documentation (https://support.apple.com/zh-cn/102266), when port 5223 cannot be connected to, it will fall back to port 443 and use a proxy. However, our packet capture showed that when port 5223 was unreachable, the apsd service on the iPad did not attempt to establish a connection to port 443. Since the iPad device currently cannot establish a connection with APNs, it consistently fails to receive push messages from APNs. We tried disconnecting the SIM card and using a Wi-Fi environment, and in this case, the iPad device was able to receive push messages from APNs normally. Could you advise us on how to proceed with troubleshooting in this situation?

Hi team, We've observed that for all background notifications (where content-available set to true, https://developer.apple.com/documentation/usernotifications/pushing-background-updates-to-your-app#Create-a-background-notification), we never received any response with error string "Unregistered". This differs from non-background pushes, where expired tokens are regularly cleared. Is this the expected behavior (i.e., background notifications will not return an "Unregistered" error), or could this indicate an issue on our side? Thanks in advance for any clarification.

以下の問題が発生しています： 特定のデバイスでプッシュ通知が受信されません。 考えられる原因は何でしょうか？ プッシュ通知は自社のサーバーから送信しており、APNs（Apple Push Notification service）からは正常な応答が返ってきています。 ユーザーはデバイスで通知が有効になっていることを確認しており、ネットワークの問題も報告されていません。 この問題は複数のユーザーに発生しています。

I got notification filtering permission from appStoreConnect, i.e. com.apple.developer.usernotifications.filtering, but not able to suppress notification even after setted contentHandler(UNNotificationContent()) and contentHandler(UNMutableNotificationContent()). Added entitlements in both extension and main app, also in signing profile these Entitlements are visible, what other changes should I do?

Facing issue while sending push notification through the application. The APNs certificate is valid. Below is the error log. System.AggregateException: One or more errors occurred. ---> PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.<SendBatch>d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.<Send>d__2.MoveNext() --- End of inner exception stack trace --- ---> (Inner Exception #0) PushSharp.Apple.ApnsNotificationException: Apns notification error: 'ConnectionError' ---> System.IO.IOException: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.EndSend(IAsyncResult asyncResult) at System.Net.Sockets.NetworkStream.EndWrite(IAsyncResult asyncResult) --- End of inner exception stack trace --- at System.Net.Security._SslStream.EndWrite(IAsyncResult asyncResult) at System.Net.Security.SslStream.EndWrite(IAsyncResult asyncResult) at System.IO.Stream.<>c.<BeginEndWriteAsync>b__53_1(Stream stream, IAsyncResult asyncResult) at System.Threading.Tasks.TaskFactory1.FromAsyncTrimPromise1.Complete(TInstance thisRef, Func3 endMethod, IAsyncResult asyncResult, Boolean requiresSynchronization) --- End of stack trace from previous location where exception was thrown --- at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task) at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd(Task task) at PushSharp.Apple.ApnsConnection.d__21.MoveNext() --- End of inner exception stack trace --- at PushSharp.Apple.ApnsServiceConnection.d__2.MoveNext()<---

I dont want my server to be spammed. Currently I am only in payment-related notifs (eg: user successfully renewed his subscription, user didnt successfully renew his subscriptions, ..) Where can I set that?

Hello Apple Developer Community, We’re building an MDM product (SaaS, multi-tenant). I’d like clarification on the APNs MDM push certificate usage model for service providers (MSPs). Question: Is it acceptable for an MDM vendor to use a single APNs MDM push certificate owned by the vendor to manage devices for multiple, independent customer organizations? Or is it required/recommended that each customer (company) must obtain and use its own APNs MDM push certificate (issued under the customer’s Apple ID) for their tenant? Why we’re asking: We understand that many guides show the process where each customer logs into the Apple Push Certificates Portal with their own Apple ID, uploads a CSR provided by the MDM, and then renews yearly. Practically, for a small team and early-stage deployments, using one vendor-owned certificate across multiple tenants would be simpler. We want to ensure we’re not violating any policy, terms, or technical requirements (e.g., certificate ownership, topic binding, device token isolation, audit/compliance expectations). What we need from Apple (or authoritative sources): An official Apple document or policy that clearly states whether per-customer certificates are mandatory vs strongly recommended for MSP/multi-tenant MDMs. If per-customer is mandatory, please point to the relevant clause or section. If a vendor uses a single certificate for multiple organizations, what risks or consequences should we expect (e.g., compliance issues, supportability, potential program violations, off-boarding problems, etc.)? Context: We’re sending only MDM wake notifications (standard MDM flow). We understand certificates expire yearly and must be renewed with the same Apple ID to avoid device re-enrollment. We want to follow Apple’s best practices while keeping early operations manageable. Any guidance, links to official documentation, or clarification from Apple engineers/moderators would be greatly appreciated. Thank you!

Dear Team, Hope You are dong good! Problem Description:- We are facing a huge delay in receiving IOS Push notifications on concerned devices. Found System.Timeout.Exception Error in IOS Logs(Screenshot & Recent Logs attached) Found a network delay between service installed servers & APNS(Apple Push Notification Service) Destination URL & Ports using in Push Notification service:- api.push.apple.com api.development.push.apple.com Destination Port-443 Also Found the error(TCP reset From server) between source(service installed server) & Destination (Apple Push Notification Service)-Screenshot attached Please have a look around the above  points & requesting advice regarding the below:- How to resolve this delay in reaching IOS push Notifications in concerned devices? Should we call more URL’s from services? If yes please provide URL’s/Ports to be opened from services ? Awaiting your Replies, Thanks,

My App supports two services that is Push Notification for Alerts and a Voip Call feature whose notification also comes in the same way as of PushNotification but video rendering is done with GoogleWebRTC. The App was working perfectly fine but from past few months these services are not working.[ Nothing is changed in App and on the server side to push the notifications] Issues: VoIP (Video call) not working: I have apns certificate which is valid in today's date and stays with the backend Server. My server sends the payload notification to APNS but on iPhone am unable to receive it. I have checked the App registration part also and is able to receive the token for the same. Framework used are: PushKit, UserNotifications, GoogleWebRTC . I don't understand where is the gap, the backend triggers the APNS but there no response. Ports enabled on server are: 443, 5223, 2197, 2195, 2196. Similarly Push notification were also not working, So I tried to change it to register on Firebase for device registration token And did some coding at backend to send the notification to that device. It was working perfectly fine from last few weeks, but it suddenly stopped. I checked the JSON Payload and tried to send it through PostMan, in both it says 200 Success. And in Application end am waiting for breakpoint to hit in userNotificationCenter(_: , willPresent, completionHandler). What all I have checked: 1)My server to APNS server connectivity. 2)Verified the apns certificate. The certificate was created in October 2024, whose expiry is in Nov 2025 and it support both Sandbox and Production environment. 3)Checked required delegates are implemented in App. With the capability enable in it, is also sending registration token to backend. Kindly guide me where I can check in this flow. Thanks in Advance!

Hello, we have a problem with fake call on iPhone device for incoming calls. When I leave the iPhone in idle state for 30, 40 seconds and dialed voip app number the iPhone rings and there is no problem. When I leave it in idle for longer time one minute or two minutes I get "Call Failed to Connect" on iPhone's display and after this fake call I get second call with real calling number displays on iPhone. This first fake call is triggered by wake up push notification type 'voip'. If I switched off this wake up push notification type 'voip' and device's token has not expired yet I don't get fake call and iPhone's directly displays calling number. But in this situation we need to use wake up push notification type 'voip' on during a certain time to keep the device's token in our database and continuing to receive calling number without fake call. If we switched off the wake up push notification type 'voip' on certain time we need to activate again wake up push notification type 'voip' for incoming calls to wake up the iPhone. And in this way every time on every incoming call the iPhone's will display first fake call "Call Failed to connect" and after that the call with Calling number. How we can eliminate this fake call and use only one wake up push notification only for incoming calls not use second type wake up push on certain time? Thank you, I paste here our code for this: public ApnClient(IOptions settings) { var httpHandler = new HttpClientHandler() { ClientCertificates = { new X509Certificate2(certificate.Export(X509ContentType.Pfx)) }, }; ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls13; this.httpClient = new HttpClient(httpHandler) { DefaultRequestVersion = HttpVersion.Version20, DefaultVersionPolicy = HttpVersionPolicy.RequestVersionOrHigher, BaseAddress = new Uri(settings.Value.ApnProdBaseUri), DefaultRequestHeaders = { { "apns-topic", ApnsTopic }, }, }; } public async Task<bool> WakeUpDevice(string deviceToken, string callId) { this.requestContent = new StringContent( $"{{\"aps\":{{\"content-available\":\"1\"}}}}", System.Text.Encoding.UTF8, "application/json"); var res = await this.httpClient.PostAsync($"/3/device/{deviceToken}", this.requestContent); return res.IsSuccessStatusCode; }

Hello. I'm currently implementing Apple Notification v2 to prepare for refunds for in-app purchases, but I'm not receiving requests from Apple servers to my backend server. I've applied HTTPS (TLS 1.2) and correctly registered production/sandbox notification URLs on App Store Connect. After requesting a test notification, when I check the status of testNotificationToken, I receive an UNSUCCESSFUL_HTTP_RESPONSE_CODE as follows: {"signedPayload":"......":[{"atteptDate":1752128001970,"sendAttemptResult":"UNSUCCESSFUL_HTTP_RESPONSE_CODE"}]} The endpoint for receiving notifications is set to accept POST requests with application/json format, and it responds with 200 (OK) without any content. However, Apple notifications are not coming through. Could anyone help me with this issue?

Hey Together, I have seen that critical notifications need to be confirmed by apple to be used. Sadly I couldn't figure out where to ask for that. Context: I have a sports tournament app for Beach Handball. There are a couple of Courts like up to 20-25. The main use for that in my app would be to notify first aiders/Medics. Right now they are called in via Speakers or by the referees just writing that into a WhatsApp chat. As this takes a long time and the speakers can be deactivated due to rain, power shortage or even the medics sometimes are not in range to exactly hear the speakers calling them. To Speed up this process I want them to download the App, Register via an E-Mail or a One Time Code. Now if a referee needs immediate Help from the Medics on their court they can send the Critical alert to the Medics without having to write a chat into a WhatsApp group, to get a call through the speakers 10 minutes later which the medics may not even hear. A couple of weeks ago we had a player falling on her back/neck/head and they couldn't figure out if she broke her neck or not. Luckily the medics were right next to the court and saw that. but what would happen if they were a couple hundred of meters away and did not notice that? I mean the PA system was off due to a power shortage. someone trying to move her? Risking her death? And while we are at it we could add those notifications if a team is missing to a court for a game that already should've started. Critical because it is urgent. Those notifications are handled with care.

I'm running into an issue during the iOS build process for my app, and I'm hoping someone can point me in the right direction. ❗ The Problem When attempting to archive the app via EAS Build (Expo), the build fails with the following error: `Provisioning profile "HCF_AppStore_ProvisioningProfile" doesn't include the com.apple.developer.push-notifications entitlement. Profile qualification is using entitlement definitions that may be out of date. Connect to network to update.` What I’ve Already Done: Enabled Push Notifications capability for the App ID (com.rsmco.helpcreatefamilies) in the Apple Developer portal. Deleted and regenerated the App Store Provisioning Profile after enabling the capability. Confirmed the new profile is associated with the correct App ID and Distribution Certificate. Uploaded the new profile to EAS (Expo) and rebuilt the app. Yet the error persists during the Xcode archive step with Exit code 65. Additional Info: Provisioning Profile Name: HCF_AppStore_ProvisioningProfile App ID: com.rsmco.helpcreatefamilies Team: Reproductive Sciences Management Company, LLC Workflow: Expo EAS Build Capability causing issue: com.apple.developer.push-notifications

Having some discussion about when we should clear out a token from our servers. Docs say: Don’t retry notification responses with the error code BadDeviceToken, DeviceTokenNotForTopic, Forbidden, ExpiredToken, Unregistered, or PayloadTooLarge. You can retry with a delay, if you get the error code TooManyRequests. The way I see it is that with the exception of PayloadTooLarge, all other errors means you should remove the token from your server. Either because: The token is no longer good The token is good, but this is just not the right: environment (sandbox vs production) topic (the token is from a different bundle id or developer team) target (app vs live activity appex) Do I have it right? Extra context: when using the "JSON Web Token Validator" tool, a colleague reported that a 410 -Expired token (from couple days back) was still valid today. This raises questions about when tokens should actually be deleted and how these error codes should be interpreted. Also is it possible for the docs to get updated for us to explicitly know if a token should get removed and not leave it for interpretation?

Hey everyone! I'm trying to develop an app that would need to send periodic notifications (every 20 minutes, for instance) to the user even when the app is not running (but only when the phone is being used). I've been reading through the prior comments and all about not being able to have a timer run in the background in the way I need it to, but I wanted to ask if there's any way around this, or is there truly no way? If there is no way to do this, I was just now considering another workaround, where I could try getting the time they open their phone, and from there, I schedule local notification for every 20 minutes or so for the entire day, and they keep sending until the phone is turned off, when the rest of the scheduled local notifications are cancelled. Is this possible? I would also appreciate any other suggests/workarounds for this. Happy to provide any additional details needed! Thanks!

Hi, I'm experiencing an issue with my app. I use Firebase as my server, and it is great. Still, there is one issue: when I send push notifications from my app to users, the users will get the notification if the app is open, but not when it is closed. I have tried many solutions to fix it, even asking AI, but the issue is still there. I would be happy to give you access to Firebase and the Xcode workspace, as I have no clue how to fix it.

I’m receiving notifications from all third-party apps that I use however, most of the time there is no sound or haptics with the notification. In some cases, very seldomly I will receive a sound when a notification comes in, but that’s only with one of the many third-party apps that I use. I’ve spoken to Apple about this when this whole problem started during an update that you guys rolled out sometime between September and November 2024. They blamed it on the app programmers but I think at this point we all know that it’s Apple’s inability to accept that the problem is on their end. I never had problems receiving notifications from any of the apps prior to that. I guess my question is will Apple ever fix this or are they going to sweep it under the rug and pretend like it doesn’t exist?

We are facing an issue: push notifications are not being received. We are using the Marketing Cloud SDK for push notifications. On install, the app correctly registers for push notifications. We pass the required information to Marketing Cloud — for example, contact key, token, etc. Marketing Cloud also confirms that the configuration is set up, and we have tried sending push notifications with proper delivery settings. The issue is that after some time, the device gets automatically opted out in the Marketing Cloud portal. When we consulted their team, they said this is caused by the “DeviceTokenNotForTopic” error received from APNs. I have verified the certificates and bundle ID from my end — everything looks correct. Device: iPhone 15, iPhone 17 iOS: 18.7.2, 26.1

When sending a single push notification to iOS 18 devices users receive the same notification multiple times. This issue appears specific to iOS 18 and was not observed in previous iOS versions Our server logs confirm each notification is sent only once. Notification payloads include proper apns-id values for identification and no network issues detected on our side

Is there anyway that I could use AVAudioSession, AVAudioPlayer or anything similar in Notification Service Extension? I am trying to implement Audio Playback in the Notification Service Extension to play specific audio file when receiving Notification regardless the app state(foreground, background or killed), but I am not able to activate audio session in Notification Service Extension. NSError *sessionError = nil; BOOL success = [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryPlayback error:&sessionError]; success = [[AVAudioSession sharedInstance] setActive:YES error:&sessionError]; if (!success) { NSLog(@"Error activating audio session: %@", sessionError); } Below is the error that I got when I am trying to run the code above in Notification Service Extension. Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed}