Howdy, I've been developing a packet tunnel extension meant to run on iOS and MacOS. For development I'm using xcodegen + xcodebuild to assemble a bunch of swift and rust code together. I'm moving from direct TUN device management on Mac to shipping a Network Extension (appex). With that move I noticed that on some mac laptops NE fails to start completely, whilst on others everything works fine. I'm using CODE_SIGN_STYLE: Automatic, Apple IDs are within the same team, all devices are registered as dev devices. Signing dev certificates, managed by xcode. Some suspicious logs: (NetworkExtension) [com.apple.networkextension:] Signature check failed: code failed to satisfy specified code requirement(s) ... (NetworkExtension) [com.apple.networkextension:] Provider is not signed with a Developer ID certificate What could be the issue? Where those inconsistencies across devices might come from?

I am in the middle of investigating an issue arising in the call to setsockopt syscall where it returns an undocumented and unexpected errno. As part of that, I'm looking for a way to list any socket content filters or any such extensions are in play on the system where this happens. To do that, I ran: systemextensionsctl list That retuns the following output: 0 extension(s) which seems to indicate there's no filters or extensions in play. However, when I do: netstat -s among other things, it shows: net_api: 2 interface filters currently attached 2 interface filters currently attached by OS 2 interface filters attached since boot 2 interface filters attached since boot by OS ... 4 socket filters currently attached 4 socket filters currently attached by OS 4 socket filters attached since boot 4 socket filters attached since boot by OS What would be the right command/tool/options that I could use to list all the socket filters/extensions (and their details) that are in use and applicable when a call to setsockopt is made from an application on that system? Edit: This is on a macosx-aarch64 with various different OS versions - 13.6.7, 14.3.1 and even 14.4.1.

Hello, Our users are seeing random crashes in our packet filter system extension on macOS. Any help pointing me in the right direction to either avoid the issue or fix it would be greatly appreciated. Attached is the crash log. Thank you. packetfilter.crash Crashed Thread: 2 Dispatch queue: com.apple.network.connections Exception Type: EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000112918700 Exception Note: EXC_CORPSE_NOTIFY Termination Signal: Bus error: 10 Termination Reason: Namespace SIGNAL, Code 0xa Terminating Process: exc handler [40687] ... Thread 2 Crashed:: Dispatch queue: com.apple.network.connections 0 libsystem_kernel.dylib 0x00007fff2089b46e os_channel_get_next_slot + 230 1 com.apple.NetworkExtension 0x00007fff2e2e2643 __40-[NEFilterPacketInterpose createChannel]_block_invoke + 560 2 libdispatch.dylib 0x00007fff20718806 _dispatch_client_callout + 8 3 libdispatch.dylib 0x00007fff2071b1b0 _dispatch_continuation_pop + 423 4 libdispatch.dylib 0x00007fff2072b564 _dispatch_source_invoke + 2061 5 libdispatch.dylib 0x00007fff20720318 _dispatch_workloop_invoke + 1784 6 libdispatch.dylib 0x00007fff20728c0d _dispatch_workloop_worker_thread + 811 7 libsystem_pthread.dylib 0x00007fff208bf45d _pthread_wqthread + 314 8 libsystem_pthread.dylib 0x00007fff208be42f start_wqthread + 15

Hello Everyone, I am currently using macOS 15.5 and XCode 16.4. I am using the following code to send/receive multicast packets on multicast group ff02::1 and port 49153 using Apple NF's NWConnectionGroup. import Network import Foundation // Creating a mutlicast group endpoint let multicastIPv6GroupEndpoint: NWEndpoint = NWEndpoint.hostPort(host: NWEndpoint.Host.ipv6(IPv6Address("ff02::1")!), port: NWEndpoint.Port("49153")!) do { let multicastGroupDescriptor: NWMulticastGroup = try NWMulticastGroup (for: [multicastIPv6GroupEndpoint]) let multicastConnectionGroupDescriptor = NWConnectionGroup (with: multicastGroupDescriptor, using: .udp) multicastConnectionGroupDescriptor.stateUpdateHandler = { state in print ("🕰️ Connection Group state: \(state)") if state == .ready { multicastConnectionGroupDescriptor.send (content: "👋🏻 Hello from the Mac 💻".data (using: .utf8)) { err in print ("➡️ Now, I am trying to send some messages.") if let err = err { print ("💥 Error sending multicast message: \(err)") } else { print ("🌚 Initial multicast message sent") } } } } multicastConnectionGroupDescriptor.setReceiveHandler { message, content, isComplete in if let content = content, let messageString = String (data: content, encoding: .utf8) { print ("⬅️ Received message: \(messageString)") } } multicastConnectionGroupDescriptor.start (queue: .global()) } catch { print ("💥 Error while creating Multicast Group: \(error)") } RunLoop.main.run() I am able to successfully create a NWConnectionGroup without any warnings/errors. The issue occurs when the stateUpdateHandler's callback gets invoked. It first gives me this warning: nw_listener_socket_inbox_create_socket IPV6_LEAVE_GROUP ff02::1.49153 failed [49: Can't assign requested address But then it shows me that the state is ready: 🕰️ Connection Group state: ready After this, when the send is performed, it gives me a bunch of errros: nw_endpoint_flow_failed_with_error [C1 ff02::1.49153 waiting parent-flow (unsatisfied (Local network prohibited), interface: en0[802.11], ipv4, ipv6, uses wifi)] already failing, returning nw_socket_connect [C1:1] connectx(7, [srcif=0, srcaddr=::.62838, dstaddr=ff02::1.49153], SAE_ASSOCID_ANY, 0, NULL, 0, NULL, SAE_CONNID_ANY) failed: [48: Address already in use] nw_socket_connect [C1:1] connectx failed (fd 7) [48: Address already in use] nw_socket_connect connectx failed [48: Address already in use] nw_endpoint_flow_failed_with_error [C1 ff02::1.49153 in_progress socket-flow (satisfied (Path is satisfied), interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] already failing, returning There is no other background process running on the same port. I tried using different ports as well as multicast groups but the same error persists. The same code works fine for an IPv4 multicast group. I have following questions: Why am I getting these errors specifically for IPv6 multicast group but not for IPv4 multicast group? Are there any configurations that needed to be done in order to get this working?

I filed FB19631435 about this just now. Basically: starting with 15.6, we've had reports (internally and outternally) that after some period of time, networking fails so badly that it can't even acquire a DHCP lease, and the system needs to be rebooted to fix this. The systems in question all have at least 2 VPN applications installed; ours is a transparent proxy provider, and the affected system also had Crowdstrike's Falcon installed. A customer system reported seemingly identical failures on their systems; they don't have Crowdstrike, but they do have Cyberhaven's. Has anyone else seen somethng like this? Since it seems to involve three different networking extensions, I'm assuming it's due to an interaction between them, not a bug in any individual one. But what do I know? 😄

I have written an App which extracts data, over WiFi, from an instrument that creates its own WiFi Hotspot. The instrument provides no internet connection. The iPad version of this App is connects fine and is assigned an IP address by DHCP server running on a MicroChip RN171 wifi module. iOS assigns an obscure IP address on a completely different subnet. I understand this is iOS' way of "Complaining" that is wasn't assigned an IP address. Consequently in the case of the iPhone I am forced to manually assign an IP address for the iPhone, the mask and the gateway. Only then is the connection successful. Anyone know why the iPhone won't talk DHCP to a WiFi module not connected to the internet? Are there perhaps some parameters that I need to adjust on either the iPhone or WiFi module?

We’re having an iPad issue accessing the local network with iPadOS 26.3. We have an automation system that tests our app on an iPad using accessibility tags. the XCTest test code sends messages from the iPad via TCP/IP to setup external test equipment. The messages abruptly stopped transmitting across the iPad blood-brain barrier with iPadOS 26.3 (26.2.1 and earlier works fine). The technique that worked involved installing a helper app with the same bundleID as our app, allowing the helper app to access the network, and when our app runs it has network access through the helper. It’s clever and kludgey. Forums that we referenced in the past: https://developer.apple.com/forums/thread/663858 TN3179: Understanding local network privacy | Apple Developer Documentation I suspect that something was changed in 26.3 that closed our window. I need two things: ID what is different in 26.3 and fix the automation system. If there’s a new way for XCUITest code to access the local network I’m happy to try it out.

Hi! My project has the Local Push Connectivity entitlement for a feature we have requiring us to send low-latency critical notifications over a local, private Wi-Fi network. We have our NEAppPushProvider creating a SSE connection using the Network framework with our hardware running a server. The server sends a keep-alive message every second. On an iPhone 16 with iOS 18+, the connection is reliable and remains stable for hours, regardless of whether the iOS app is in the foreground, background, or killed. One of our QA engineers has been testing on an iPhone 13 running iOS 16, and has notice shortly after locking the phone, specifically when not connected to power the device seems to turn off the Wi-Fi radio. So when the server sends a notification, it is not received. About 30s later, it seems to be back on. This happens on regular intervals. When looking at our log data, the provider does seem to be getting stopped, then restarted shortly after. The reason code is NEProviderStopReasonNoNetworkAvailable, which further validates that the network is getting dropped by the device in regular intervals. My questions are: Were there possibly silent changes to the framework between iOS versions that could be the reason we're seeing inconsistent behavior? Is there a connection type we could use, instead of SSE, that would prevent the device from disconnecting and reconnecting to the Wi-Fi network? Is there an alternative approach to allow us to maintain a persistent network connection with the extension or app?

Hello eveybody,Currently I'm working on an app which connects to a device. During testing I encounter an internal error of NEHotspotConfigurationErrorDomain. See the log snippet:Domain=NEHotspotConfigurationErrorDomain Code=8 "internal error." UserInfo={NSLocalizedDescription=internal error.}This error appears randomly. In one day I encountered it three times. The only solution I can think of is catching this error somehow and then telling the user to restart the device.After this error appears, the wifi functionality of iOS in all third party apps seems to be broken. Only restarting helps as far as I know. Also there seems to be nothing we as app developers can do about it. Therefor I wonder if there is some way to prevent this error somehow? The only solution I can think of is catching this error somehow and then telling the user to restart the device.Also since there is not much information about this error on the web, it would be really nice if someone can clarify whats going on with this error.Regards.

I upgraded my Mac to Sequoia 15.4.1 an i hat to upgrade XCode to Version 16.3. I access a MQTT Broker by an sending an mosquitto_sub request to the Broker. Now its no longer possible the request fails i granted Network permission to my App

I have a custom VPN app that uses NETunnelProviderManager to install a VPN Profile if one is not already installed. On previous iOS versions this would open the VPN Settings and ask for either the PIN, FaceID or TouchID and install the profile. With iOS 26 beta5 it opens the VPN Settings and stops. Is this a bug in iOS 26? Have there been changes to NETunnelProviderManager for iOS 26 that I'm not aware of? FYI we do the samething on macOS 26 beta5 and that works as expected.

We have observed an internet access issue after the device enters idle mode on iOS 26 beta 9. Although the Ivanti Secure Access Client appears connected, users are unable to access any resources (internet or intranet) after unlocking the device from idle. When we check the log socket connection looks not disrupted, packets are tunnelled but no resource access. Split tunnel enabled and proxy PAC configured. This was observed on both iOS and iPadOS 26 beta. Steps to reproduce: Connecting to the internet, launching the Ivanti client, locking the device, and then unlocking it after a brief period of idle. The issue occurs when the VPN remains connected but no resources are accessible.

(iOS 17.3) I'm using the Apple supplied iOS sample project "ConfiguringAWiFiAccessoryToJoinTheUsersNetwork" as a base to write an App to configure an existing WiFi device using the NEHotspotConfiguration API's. I have almost everything working, and can join the network and send a packet to the device to configure it. I know that it is working as the device responds properly to what I send it. But I am not able to receive the response back from the device to the packet sent. (Only need 1 packet sent and 1 packet received) However. If I run a packet sniffer on the phone before running my test App, then I do get a response. No packet sniffer running, no response. When I do a debugDescription on the NWConnection after it reaches ".ready", I notice that when the sniffer is running I'm using loopback lo0: [C1 connected 192.168.4.1:80 tcp, url: http://192.168.4.1:80, attribution: developer, path satisfied (Path is satisfied), viable, interface: lo0] and I get a packet response in the NWConnection receiveMessage callback. But with no sniffer running, I get interface en0: [C1 connected 192.168.4.1:80 tcp, url: http://192.168.4.1:80, attribution: developer, path satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, dns, uses wifi] and there is no callback to the receiveMessage handler and the NWconnection eventually times out. The interface used seems to be the only difference that I can see when I have a sniffer running. Any ideas as to why I can't see a response in "normal" operation?

My laptop (M1 Pro, macOS 15.3.2) is connected to a dual stack network via Wi-Fi. The home.arpa. domain is supplied as a search domain via both DHCPv4 (options 15 and 119) and DHCPv6 (option 24). "Details…" for the network connection in System Settings show this domain under the DNS tab. The laptop uses a Forwarding DNS Resolver of my router, which in turn forwards requests for home.arpa. (including subdomains) to a local DNS server (CoreDNS) which is authoritative for this zone. The DNS server is configured via the following zone file: $ORIGIN home.arpa. $TTL 3600 @ IN SOA @ nobody.invalid. (1 3600 1200 604800 3600) @ NS @ @ AAAA ….1 gateway A ….1 gateway AAAA …::1 b._dns-sd._udp PTR @ lb._dns-sd._udp PTR @ db._dns-sd._udp PTR @ _services._dns-sd._udp PTR _smb._tcp _smb._tcp PTR Media._smb._tcp Media._smb._tcp SRV 0 0 445 gateway Media._smb._tcp TXT ("path=/media" "u=guest") Output of dig(1) looks like: $ dig @….1 -t PTR lb._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43291 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;lb._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: lb._dns-sd._udp.home.arpa. 1993 IN PTR home.arpa. ;; AUTHORITY SECTION: home.arpa. 2771 IN NS home.arpa. $ dig @….1 -t PTR _services._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 9057 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_services._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: _services._dns-sd._udp.home.arpa. 3600 IN PTR _smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t PTR _smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44220 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_smb._tcp.home.arpa. IN PTR ;; ANSWER SECTION: _smb._tcp.home.arpa. 3599 IN PTR Media._smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3599 IN NS home.arpa. $ dig @….1 -t SRV Media._smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45878 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;Media._smb._tcp.home.arpa. IN SRV ;; ANSWER SECTION: media._smb._tcp.home.arpa. 3600 IN SRV 0 0 445 gateway.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t A gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2782 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN A ;; ANSWER SECTION: gateway.home.arpa. 86400 IN A 192.168.99.1 ;; AUTHORITY SECTION: home.arpa. 3578 IN NS home.arpa. $ dig @….1 -t AAAA gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17297 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN AAAA ;; ANSWER SECTION: gateway.home.arpa. 3600 IN AAAA fd6f:9784:5753::1 ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. Output of dns-sd(1): /usr/bin/dns-sd -test … Testing for error returns when various strings are > 63 bytes: PASSED Running basic API input range tests with various pointer parameters set to NULL: Basic API input range tests: PASSED $ dns-sd -m -F Looking for recommended browsing domains: DATE: ---Fri 11 Apr 2025--- 8:50:17.846 ...STARTING... Timestamp Recommended Browsing domain 8:50:17.847 Added (More) local 8:50:17.847 Added arpa - > home $ dns-sd -B _smb._tcp home.arpa. Browsing for _smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 8:59:10.044 ...STARTING... $ dns-sd -L Media _smb._tcp home.arpa. Lookup Media._smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 9:15:53.328 ...STARTING... $ dns-sd -Q _smb._tcp.home.arpa. PTR IN DATE: ---Fri 11 Apr 2025--- 9:16:52.208 ...STARTING... Timestamp A/R Flags IF Name Type Class Rdata 9:16:52.210 Add 40000002 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record 9:16:52.222 Add 2 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record Similarly, when I open Finder->Network I see home.arpa but it's empty. Of interest is that on the DNS server side I see the following requests being made: 2025-04-11 09:03:15 container,info,debug [INFO] […]:56541 - 21555 "SOA IN _afpovertcp._tcp.home.arpa. udp 44 false 512" NXDOMAIN qr,aa,rd 112 0.000755089s 2025-04-11 09:03:15 container,info,debug [INFO] […]:56077 - 58266 "SOA IN _smb._tcp.home.arpa. udp 37 false 512" NOERROR qr,aa,rd 105 0.001012632s 2025-04-11 09:03:15 container,info,debug [INFO] […]:45274 - 45976 "SOA IN _rfb._tcp.home.arpa. udp 37 false 512" NXDOMAIN qr,aa,rd 105 0.000762339s 2025-04-11 09:03:15 container,info,debug [INFO] […]:54387 - 32090 "SOA IN _adisk._tcp.home.arpa. udp 39 false 512" NXDOMAIN qr,aa,rd 107 0.001058132s 2025-04-11 09:03:15 container,info,debug [INFO] […]:35855 - 51155 "SOA IN _tcp.home.arpa. udp 32 false 512" NOERROR qr,aa,rd 100 0.000664963s I suppose that an attempt to locate services is made but it's unsuccessful and I'm not sure why. What further debugging can I attempt?

All of our uses of CFSockets have started causing crashes in iOS 16. They seem to be deprecated so we are trying to transition over to using the Network framework and NWConnection to try to fix the crashes. One of our uses of them is to ping a device on the local network to make sure it is there and online and provide a heartbeat status in logs as well as put the application into a disabled state if it is not available as it is critical to the functionality of the app. I know it is discouraged to disable any functionality based on the reachability of a resource but this is in an enterprise environment where the reachability of this device is mission critical. I've seen other people ask about the ability to ping with the Network framework and the answers I've found have said that this is not possible and pointed people to the SimplePing sample code but it turns out our existing ping code is already using this technique and it is crashing just like our other CFSocket usages, inside CFSocketInvalidate with the error BUG IN CLIENT OF LIBPLATFORM: Trying to recursively lock an os_unfair_lock. Is there any updated way to perform a ping without using the CFSocket APIs that now seem to be broken/unsupported on iOS 16?

Our application uses NEFilterPacketProvider to filter network traffic and we sometimes get a wired crash when removing/updating the network extension. It only happens on MacOS 11-12 . The crashing thread is always this one and it shows up after I call the completionHandler from the stopFilter func Application Specific Information: BUG IN CLIENT OF LIBDISPATCH: Release of a suspended object Thread 6 Crashed:: Dispatch queue: com.apple.network.connections 0 libdispatch.dylib 0x00007fff2039cc35 _dispatch_queue_xref_dispose.cold.1 + 24 1 libdispatch.dylib 0x00007fff20373808 _dispatch_queue_xref_dispose + 50 2 libdispatch.dylib 0x00007fff2036e2eb -[OS_dispatch_source _xref_dispose] + 17 3 libnetwork.dylib 0x00007fff242b5999 __nw_queue_context_create_source_block_invoke + 41 4 libdispatch.dylib 0x00007fff2036d623 _dispatch_call_block_and_release + 12 5 libdispatch.dylib 0x00007fff2036e806 _dispatch_client_callout + 8 6 libdispatch.dylib 0x00007fff203711b0 _dispatch_continuation_pop + 423 7 libdispatch.dylib 0x00007fff203811f4 _dispatch_source_invoke + 1181 8 libdispatch.dylib 0x00007fff20376318 _dispatch_workloop_invoke + 1784 9 libdispatch.dylib 0x00007fff2037ec0d _dispatch_workloop_worker_thread + 811 10 libsystem_pthread.dylib 0x00007fff2051545d _pthread_wqthread + 314 11 libsystem_pthread.dylib 0x00007fff2051442f start_wqthread + 15 I do have a DispatchSourceTimer but I cancel it in the stop func. Any ideas on how to tackle this?

Hi, My app uses the NetworkExtension framework to connect to an access point. For some reason, my app occasionally fails to find and/or connect to my AP (which I know is online and beaconing on a given frequency). This roughly happens 1/10 times. I am using an iPhone 17, running iOS 26.0.1. I am connecting to a WPA2-Personal network. In the iPhone system logs, I see the following: Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: Dequeuing command type: "Scan" pending commands: 0 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceCopyPreparedScanResults: network records count: 0 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: WiFi infra associated, NAN DISABLED, , DFS state Off, IR INACTIVE, llwLink ACTIVE, RTM-DP 0, allowing scans Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: isScanDisallowedByAwdl[1148] : InfraScanAllowed 1 (RTModeScan 0 NonSteering 0 assistDisc 0 HTMode 0 RTModeNeeded 0 Immin 0 ScanType 1 Flags 0 ScanOn2GOnly 0 DevAllows2G 1) Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x2(oldState 0) on:1, source:ScanManagerFamily, err:0 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: setScanningState:: Scan request from ScanManagerFamily. Time since last scan(1.732 s) Number of channels(0), 2.4 only(no), isDFSScan 0, airplaying 0, scanningState 0x2 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x2(oldState 0) on:1, source:ScanManagerFamily, err:0 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: Controller Scan Started, scan state 0 -> 2 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x0(oldState 2) on:0, source:ScanError, err:3766617154 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: setScanningState[23946]:: Scan complete for source(8)ScanError. Time(0.000 s), airplaying 0, scanningState 0x0 oldState 0x2 rtModeActive 0 (ProxSetup 0 curSchedState 3) Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x0(oldState 2) on:0, source:ScanError, err:3766617154 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: Controller Scan Done, scan state 2 -> 0 Oct 10 10:34:10 wifid(IO80211)[54] <Notice>: Apple80211IOCTLSetWrapper:6536 @[35563.366221] ifname['en0'] IOUC type 10/'APPLE80211_IOC_SCAN_REQ', len[5528] return -528350142/0xe0820442 Oct 10 10:34:10 wifid[54] <Notice>: [WiFiPolicy] {SCAN-} Completed Apple80211ScanAsync on en0 (0xe0820442) with 0 networks Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Error>: __WiFiDeviceCreateFilteredScanResults: null scanResults Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceCreateFilteredScanResults: rssiThresh 0, doTrimming 0, scanResultsCount: 0, trimmedScanResultsCount: 0, filteredScanResultsCount: 0, nullNetworksCount: 0 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerDispatchUserForcedAssociationCallback: result 1 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Error>: __WiFiDeviceManagerForcedAssociationCallback: failed to association error 1 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: WiFiLocalizationGetLocalizedString: lang='en_GB' key='WIFI_JOIN_NETWORK_FAILURE_TITLE' value='Unable to join the network \M-b\M^@\M^\%@\M-b\M^@\M^]' Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: WiFiLocalizationGetLocalizedString: lang='en_GB' key='WIFI_FAILURE_OK' value='OK' Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerUserForcedAssociationScanCallback: scan results were empty It looks like there is a scan error, and I see the error: failed to association error 1. I have also seen the iOS device find the SSID but fail to associate (associated error 2): Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiMetricsManagerCopyLinkChangeNetworkParams: updating AccessPointInfo: { DeviceNameElement = testssid; ManufacturerElement = " "; ModelName = " "; ModelNumber = " "; } Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiMetricsManagerCopyLinkChangeNetworkParams: minSupportDataRate 6, maxSupportDataRate 54 Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: Disassociated. Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: __WiFiMetricsManagerUpdateDBAndSubmitAssociationFailure: Failed to append deauthSourceOUI to CA event Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: __WiFiMetricsManagerUpdateDBAndSubmitAssociationFailure: Failed to append bssidOUI to CA event ..... <log omitted> ..... <log omitted> Oct 8 12:25:52 wifid(CoreWiFi)[54] <Notice>: [corewifi] END REQ [GET SSID] took 0.005530542s (pid=260 proc=mediaplaybackd bundleID=com.apple.mediaplaybackd codesignID=com.apple.mediaplaybackd service=com.apple.private.corewifi-xpc qos=21 intf=(null) uuid=D67EF err=-528342013 reply=(null) Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Presenting a CFUserNotification with reply port: 259427 on behalf of: wifid.54 Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Received request to activate alertItem: <SBUserNotificationAlert: 0xc20a49b80; title: Unable to join the network \M-b\M^@\M^\\134^Htestssid\134^?\M-b\M^@\M^]; source: wifid; pid: 54> Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerUserForcedAssociationCallback: failed forced association Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Activation - Presenting <SBUserNotificationAlert: 0xc20a49b80; title: Unable to join the network \M-b\M^@\M^\\134^Htestssid\134^?\M-b\M^@\M^]; source: wifid; pid: 54> with presenter: <SBUnlockedAlertItemPresenter: 0xc1d9f6530> Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerDispatchUserForcedAssociationCallback: result 2 Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Activation - Presenter:<SBUnlockedAlertItemPresenter: 0xc1d9f6530> will present presentation: <SBAlertItemPresentation: 0xc1cd40820; alertItem: <SBUserNotificationAlert: 0xc20a49b80; presented: NO>; presenter: <SBUnlockedAlertItemPresenter: 0xc1d9f6530>> Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: __WiFiDeviceManagerForcedAssociationCallback: failed to association error 2 Anyone able to help with this?

Hello, Recently I am trying to add stub dns server to my Network Extension (a VPN app), after some research on this forum, and since my language is C, I have the following plan: create a udp socket which use setsockopt(IP_BOUND_IF) to bound the socket to the utun if index obtained, and also bind to the address of the utun address I set(let's say 192.168.99.2), then listen on the udp port 53 which is ready to handle dns request. configure the dns server to 192.168.99.2 in the provider's Network Settings, thus iOS system will send udp query to the udp socket created in step 1, and it can then do some split dns function such as resolve using local interface (cellular or wifi), or some nameserve which will be routed to the VPN tunnel (will create new UDP socket and do IP_BOUND_IF to ensure the traffic will enter the VPN tunnel), and the result should be return to the system and then the non VPP apps. But I observer weird issue, indeed I can get the system send the dns request to the listening udp socket and I can get the result write to the system(address like 192.168.99.2:56144, the port should be allocated by the iOS system's DNS component) without any failure(I did get some error before due to I using the wrong utun if index, but fixed it later), but it seems non VPN app like browser can't get the resolved ip for domains. I want to ask is this limited by the sandbox? or any special sock opt I need to do. Thanks. PS: in the provider's network settings, all the system's traffic will be point to the utun, which means the VPN process will process all the traffic. the reason I do not set the dns server to utun peers side which is my userspace networking stack's ip (192.168.99.1) is the stack is not be able to leverage some dns libraries due to architecture issue. (it's fd.io vpp which we ported to apple platform).

When installing a new version the app while a tunnel is connected, seemingly the old packet tunnel process gets stopped but the new one does not come back up. Reportedly, a path monitor is reporting that the device has no connectivity. Is this the expected behavior? When installing an update from TestFlight or the App store, the packet tunnel instance from the old tunnel is stopped, but, due to the profile being on-demand and incldueAllNetworks, the path monitoring believes the device has no connectivity - so the new app is never downloaded. Is this the expected behavior? During development, the old packet tunnel gets stopped, the new app is installed, but the new packet tunnel is never started. To start it, the user has to toggle the VPN twice from the Settings app. The tunnel could be started from the VPN app too, if we chose to not take the path monitor into account, but then the user still needs to attempt to start the tunnel twice - it only works on the second try. As far as we can tell, the first time around, the packet tunnel never gets started, the app receives an update about NEVPNStatus being set to disconnecting yet NEVPNConnection does not throw. The behavior I was naively expecting was that the packet tunnel process would be stopped only when the new app is fully downloaded and when the update is installed, Are we doing something horribly wrong here?

With my UDP Flow Copier working as demonstrated by the fact that it is proxying DNS traffic successfully, I am finally writing tests to verify UDP packet filtering. I'm sending packets to a public UDP echo server and reading the response successfully. In my initial testing however the TransparentProxyProvider System Extension is not intercepting my UDP traffic. handleNewUDPFlow() is being called for DNS but not for my test case UDP echo sends and receives. I've tried sending UDP with both GCDAsyncSocket and NWConnection as: connection = NWConnection(host: host, port: port, using: .udp) Is there some other criteria for UDP datagrams to be intercepted? Google search suggests this might be a known issue for connected or async UDP sockets.