'Company A' is scheduled to merge with its parent company, 'Company B'. Both A and B have Apple accounts. A's account has one domain registered for Apple Pay integration, while Account B has no domain registered. We attempted to register A’s domain under B’s account. However, the notification 'Requested domain name has been verified previously.' appeared, and we could not complete the registration. Please confirm whether it is correct that a domain already registered under Account A cannot be registered again under Account B. If we cannot register same domain in two accounts, we believe that the domain registered under A's account must be deleted first and then registered under B's account. In that case, will payments become unavailable immediately upon deletion of the domain, or will payments still be possible for a certain period of time after deletion? In our testing, we found that payments were not blocked immediately, but we would like to confirm further. We are concerned about the possibility of transaction failures during the short period between deleting the domain from A's Account and registering it under B's Account.

Hello, we are developing in app provisioning of our American Express network cards. After clicking add to apple wallet in our app, I launch the PKAddPaymentPassViewController and click next. It loads for a few seconds and then I get: [<private>] ProvisioningOperationComposer: Step '<private>' failed with error Error Domain=PKProvisioningErrorDomain Code=5 UserInfo={PKErrorHTTPResponseStatusCodeKey=500} Does anyone have any insight on what this error means?

We’re building a usage-based rental flow. The final charge is only known after the session ends (like gas pumps). We want the same Apple Pay UX that gas stations like at a gas station has: the user does not see a pre-authorization amount up front; they only see “approved” and later the final posted amount on the statement. What we observe (gas stations / desired UX) When paying at gas station with Apple Pay (card-present), the user confirms their card (double-tap) but no pre-auth amount is shown in Wallet/notification UI. The small notification is from the bank (not the merchant) and shows only bank + merchant name, no total. After fueling ends, the final amount appears on the statement from the merchant. What happens in our flow (current behavior) Platform: Apple Pay via Stripe (Apple Pay on the Web with QR → mobile Safari Wallet sheet). When a user confirms payment, the pre-authorization amount is shown immediately to the user (appears like a charge from the user’s perspective). We want to avoid showing that amount, matching the pay-at-pump experience.

For Apple Pay testing, I have tried the following: Sign into the Sandbox Account via Developer Settings: Settings > Developer > Sandbox Account Keep your main Apple ID for everything else Add Test Cards to Wallet: Try adding the test card numbers (MasterCard and Visa Debit, as we support only those) Apple provides in their documentation. Unfortunately, none of them are added to the wallet. All the time it gives 'Could Not Add Card'. I tried on devices with iOS 18+. Can anyone advise on this? Thanks

I am trying to play around on the Apple Pay demo page (https://applepaydemo.apple.com) and I am getting the following error response. PaymentRequest AbortError: The operation was aborted. I am using the Payment Request API

Hello. I have a few questions about the implementation of Apple Pay payments on websites. Could you help me From the documentation: Apple Pay issues an Apple Pay Merchant Token if the user’s payment network supports merchant-specific payment tokens. Otherwise, Apple Pay issues a device token for the payment request. How can we determine whether a token is a merchant token or a device token? Is it possible to determine this by any of the token fields? https://developer.apple.com/documentation/passkit/payment-token-format-reference Is it possible to understand this in other ways? Can I make recurring payments with the device token if it was issued instead of the merchant token? Is it necessary to include the tokenNotificationURL when generating a merchant token, or can we generate one without specifying it? What does the applicationExpirationDate field in the merchant token represent? Is this the date when the device token or merchant token expires and payments cannot be made with it?

We have been using ApplePay on the web for years, but we are running into a problem since today in sandbox where domainName is missing from the create payment sessions request. We haven't changed anything related to this request any time recently. Static payment sessions url being hit in sandbox: https://apple-pay-gateway-cert.apple.com/paymentservices/paymentSession request format: "merchantIdentifier": "merchant.com.identifier", "displayName": "Test Store", "initiative": "web", "initiativeContext": "test.example.com", "domainName": "test.example.com" response format: { "epochTimestamp": 1763533367972, "expiresAt": 1763536967972, "merchantSessionIdentifier": "<merchantSessionIdentifier>", "nonce": "<nonce>", "merchantIdentifier": "<merchantIdentifier>", "displayName": "Test Store", "signature": "<signature>", "initiative": "web", "initiativeContext": "test.example.com", "signedFields": [ "merchantIdentifier", "merchantSessionIdentifier", "initiative", "initiativeContext", "displayName", "nonce" ], "operationalAnalyticsIdentifier": "Test Store:<identifier>", "retries": 0, "pspId": "<pspId>" } Production create session request to https://apple-pay-gateway.apple.com/paymentservices/paymentSession is behaving as expected, sending the following fields as response: epochTimestamp, expiresAt, merchantSessionIdentifier, nonce, merchantIdentifier, domainName, displayName, signature, operationalAnalyticsIdentifier, retries, pspId Claude seems to suggest this is a response when Messages for Business is enabled, but this ApplePay Payment Processing merchant is only configured for Apple Pay on the Web. Any ideas or pointers to check for? We are worried this will spill over in production as well, which will break our ApplePay integration. Thanks in advance!

I am adding In-App provisioning to my app. I am able to access the Apple Pay Sandbox and I have successfully tested adding a secure element/payment pass to Apple Wallet. However, once the pass has been added to the wallet, I can not access or retrieve the pass from my app. I have confirmed with the PNO that the PNO Pass Metadata Configuration in the testing environment include the correct metadata for "associatedApplicationIdentifiers" and "associatedStoreIdentifiers". Does anyone know why I am having this issue and how I can resolve it? Steps used to access pass in Apple Wallet I am unable to view the pass when I attempt to access it using the PKPassLibrary function as follows: let library = PKPassLibrary() if #available(iOS 13.4, *) { // This returns an empty array library.passes(of: .secureElement) } else { // This also returns an empty array library.passes(of: .payment) } // This returns an empty array too library.passes() Steps used to add pass to Apple Wallet These are the steps I follow to add the card: I create a PKAddPaymentPassRequestConfiguration I use this config to instantiate a PKAddPaymentPassViewController. I provide the nonce, nonceSignature, and certificates to my PNO along with the card data. I receive the activationData, encryptedPassData, and ephemeralPublicKey from my PNO and create a PKAddPaymentPassRequest using this data. I add the pass to Apple Wallet. In the addPaymentPassViewController callback, I am able to view the pass data from the .didFinishAdding pass: PKPaymentPass? variable. I am also able to see that the pass has been added from Apple Wallet app. I am not able to access the pass using PKPassLibrary().passes() at this point. I am not able to access the pass at any point after adding it either.

Hello, Please help. We have been experiencing what appears to be a TLS handshake error in our Apple Pay merchant validation requests (2-way TLS) since June 25, 2025. We are aware of the encryption algorithm changes made in February 2025, and our system was functioning correctly at that time. However, the error started occurring suddenly and only recently. Could you please clarify the following points? Have there been any changes to the TLS configuration (cipher suites, certificates, protocol versions, etc.) on the Apple Pay server side since June 2025? Have there been any updates to the specifications or recommended settings for merchant validation requests? Is there any way to contact Apple for technical support regarding this issue other than through the Developer Forums? Our Merchant Identity Certificate has already been renewed and is confirmed to be valid.

During Apple Pay in-app provisioning (EV_ECC_v2), our iOS app successfully obtains the issuer provisioning certificates and generates cryptographic material. The flow fails when Apple posts the card blob to Apple’s broker (card creation step), returning HTTP 500 from .../broker/v4/devices/{SEID}/cards. Steps: Call issuerProvisioningCertificates?encryptionVersion=EV_ECC_v2 → 200 OK; returns ECC leaf + Apple Root CA chain; nonce=2a831be4. 2. Build {encryptedCardData, activationData, ephemeralPublicKey} 3. POST /broker/v4/devices/{SEID}/cards Expected: 200 OK on /broker/v4/devices/{SEID}/cards, or 5xx with a descriptive error if payload/cryptography is invalid. Observed: 500 Internal Server Error from Apple broker on /cards (labeled “eligibility” in PassKit logs), causing a terminal failure in Wallet UI.

We are a regulated financial institution and Apple Pay issuer seeking clarification on the in-app push provisioning requirement and the January 15, 2026 timeline. Like many community financial institutions: Our mobile banking app is issuer-branded but provided by a third-party vendor Apple Pay enablement and tokenization are handled by a separate card processor While we support Apple’s goals and understand the issuer is ultimately responsible, delivery of in-app provisioning is dependent on third-party vendor roadmaps and cross-vendor integrations that are outside our direct control. Despite active, good-faith efforts with both vendors, current platform constraints make the January 15, 2026 deadline challenging. We would appreciate clarification on: How Apple evaluates compliance when an issuer’s mobile app is built and maintained by a third party Whether any transitional flexibility or phased enforcement is expected for issuers showing documented progress Whether approved web-based provisioning may be acceptable as an interim option How issuers should document due diligence when vendor dependencies delay implementation Additional guidance would help many credit unions and community banks plan appropriately and remain compliant. Thank you for your guidance.

I have a problem generating the domain certificate for a merchant id it gives me an error but when using the URL that Apple uses to validate said within the .well-known if the file can be loaded

Dears, Please take a look at case: FB21940123 (Wallet Extension unable to add card) Thanks

Hello everyone. I encountered a problem when integrating Apple Pay. I obtained all the renewal orders through the Apple interface, and their purchaseDate is 8 hours later than the actual payment time. Why is this happening? According to the documentation, the purchaseDate value provided by Apple is a millisecond timestamp that represents the actual payment time of the user, so theoretically there shouldn’t be any timezone issues. This works well in client-initiated subscriptions, but in renewal scenarios, the purchaseDate becomes unreliable. Could this be due to some configuration in the configuration center? For example, I actually received an Apple notification at 1746686911000 (2025-05-08 06:48:31 Etc/GMT). However, the data returned by the Apple interface is as shown below: { "appAccountToken": "xxxx", "bundleId": "xxxx", "currency": "GBP", "environment": "Production", "expiresDate": 1762616831000, "inAppOwnershipType": "PURCHASED", "isUpgraded": false, "offerDiscountType": "", "offerIdentifier": "", "offerType": 0, "originalPurchaseDate": 1746456432000, "originalTransactionId": "320002311698411", "price": 39990, "productId": "xxxx", "purchaseDate": 1746715631000, "quantity": 1, "revocationDate": 0, "revocationReason": 0, "signedDate": 1746687092825, "storefront": "GBR", "storefrontId": "xxxx", "subscriptionGroupIdentifier": "xxxx", "transactionId": "320002315815857", "transactionReason": "RENEWAL", "type": "Auto-Renewable Subscription", "webOrderLineItemId": "320001062124562" } You can see that the purchaseDate is 1746715631000 (2025-05-08 14:48:31 Etc/GMT), which is even later than the current time. Can someone explain this behavior that is inconsistent with the documentation, or did I do something wrong? I would be very grateful for any help anyone can provide.

Hello, We are implementing in-app provisioning in our fintech app; the card issuer is a third party, so we have limited control and visibility. We have ruled out the causes we could investigate on our side and on the card issuer’s side. We are reaching out to ask for your help in understanding what is going wrong so we can fix it. What happens: User taps “Add to Apple Wallet” → we present PKAddPaymentPassViewController → they tap Next → after a few seconds the flow fails with "Set Up Later" alert. Device log: ProvisioningOperationComposer: Step 'eligibility' failed with error <PKProvisioningError: severity: 'terminal'; internalDebugDescriptions: '( "eligibility request failure", "Received HTTP 500" )'; underlyingError: 'Error Domain=PKPaymentWebServiceErrorDomain Code=0 "Unexpected error." UserInfo={PKErrorHTTPResponseStatusCodeKey=500, NSLocalizedDescription=Unexpected error.}'; userInfo: '{ PKErrorHTTPResponseStatusCodeKey = 500; }'; Feedback Assistant ID: FB22007923 (Error during the In-App Provisioning process)

Hi Apple Pay Team, We are building a QR-based payment platform and planning to integrate Apple Pay on the Web as a Payment Platform Integrator. Our setup: We operate a single domain (e.g., pay.example.com) where all Apple Pay transactions take place When a customer scans a merchant's QR code, our hosted page opens with the Apple Pay button We process payments on behalf of multiple merchants (receivers), each with a separate merchant ID at our payment processor We want to use a single Payment Platform Integrator ID with one set of certificates (Merchant Identity + Payment Processing) The payment processor handles sub-merchant identification and settlement to the correct receiver via card network (Visa/Mastercard) sub-merchant fields Our question: Since all transactions happen on our single domain, is it mandatory to register each sub-merchant via the Apple Pay Web Merchant Registration API (/paymentservices/registerMerchant) and use their partnerInternalMerchantIdentifier in the payment session request? Or is it acceptable to use our Platform Integrator's own merchant identifier for all payment sessions, given that: Only one domain is involved Sub-merchant identification is handled at the payment processor / card network level Our domain verification file is already hosted and verified We would appreciate clarity on the correct approach before we proceed with our integration. Thank you.

Hello, We are encountering an issue with Apple Pay on the Web in the sandbox environment where payments cannot be completed because the onpaymentauthorized event is not triggered. The same implementation was working normally until March 5, but the issue started occurring consistently from March 6 without any changes to our code, certificates, or merchant configuration. Environment Apple Pay on the Web (JavaScript) Safari (iOS / macOS) Apple Pay Sandbox Merchant domain verified Merchant validation succeeds Observed Flow The Apple Pay flow proceeds normally until authentication: User clicks the Apple Pay button ApplePaySession.begin() is called onvalidatemerchant fires Merchant validation request succeeds completeMerchantValidation() is called Apple Pay sheet is displayed User authenticates with Face ID / Touch ID onpaymentauthorized is never triggered Because this event never fires, the payment token is not returned and the payment cannot proceed. ApplePaySession Request { "countryCode": "JP", "currencyCode": "JPY", "merchantCapabilities": ["supports3DS"], "supportedNetworks": ["visa", "masterCard"], "total": { "label": "Test Payment", "type": "final", "amount": "100" } } Merchant Validation Merchant validation succeeds and returns a valid session from Apple. Relevant fields from the merchant session: merchantIdentifier: 35A786BE6AB4... domainName: secure.telecom-awstest.com displayName: ApplePay Additional Notes Apple Pay sheet appears normally Authentication completes successfully No JavaScript errors are logged onpaymentauthorized is never fired Issue occurs consistently in the sandbox environment Confirmed across multiple iOS versions Question Has anyone experienced a similar issue recently in the Apple Pay sandbox environment, or are there any known changes that could cause the onpaymentauthorized event not to fire after authentication? Any insights would be greatly appreciated. Thank you.

We already have an apple pay integration with a psp.
We have a merchant id with an identity certificate, a processing certificate and merchant domains. We are working to integrate an other psp. This psp have one csr (processing certificate) by customer. All the payment will be processed on the same domain. We have understood that it is not possible to have different processing certificates for a merchant id. So we can not reused our existing merchant id.

 On the other hand, it seems that it is not possible to have different merchant ids on the same domain (because of the domain verification). But all payments are processed on the same domain.

 Do you think there is a solution ?
Is there a recommended workaround for this scenario?

Hello everyone, We've encountered a blocking issue while integrating Apple Pay on the Web within a Salesforce Commerce Cloud (SFCC) environment. The session fails immediately after a successful user authentication. Problem Summary: After a user authenticates a payment with Touch ID or Face ID, the Apple Pay sheet showing error "Payment not completed" message. The core of the issue is that the onpaymentauthorized event handler is never invoked in our client-side JavaScript. As a result, the corresponding server-side SFCC paymentAuthorized hooks are never triggered, and we cannot obtain a payment token to complete the transaction. Also, No console logs are observed. Observed Flow of Events: The ApplePaySession proceeds correctly through the initial callbacks. We have verified through server-side logs that the corresponding SFCC platform hooks (getRequest, prepareBasket, shippingContactSelected, shippingMethodSelected) fire and complete successfully. The payment sheet correctly updates with shipping costs and the final transaction amount. Failure Point & Steps to Reproduce: A user initiates an Apple Pay transaction within our SFCC site. They select their shipping contact and method. The payment sheet updates the total amount. The user taps the "Pay" button and authenticates successfully via Touch ID / Face ID. Failure: The sheet immediately displays "Payment not completed" error. The onpaymentauthorized event is never fired on the client, and no paymentAuthorized calls reach our SFCC backend. We have confirmed this behavior is reproducible even when using the standard plugin_applepay provided by SFCC. There are no associated errors in the browser's JavaScript console or any server-side logs, as the process appears to fail within the native Apple Pay session before control is returned to our client-side code. Our Questions: Given this is occurring within an SFCC integration, we are trying to understand what could cause the session to terminate at this specific point. Are there internal validation checks that occur after successful user authentication but before the onpaymentauthorized event is dispatched? What configuration issues (e.g., in the ApplePayPaymentRequest, merchant identity certificate, etc.) are known to cause a failure at this exact step, especially within a platform integration like SFCC? Is there any additional client-side logging or debugging we can enable to get more insight into the internal state of the ApplePaySession? Any guidance from Apple engineers or other developers who have integrated Apple Pay with SFCC would be greatly appreciated. Thank you

after doing all the steps as in The app version submission must be in the “Prepare for Submission” state There must be at least one IAP/subscription in the “Ready to Submit” state All banking & agreements must set up and in place I am still not seeing the In-App purchase and subscription in my iOS App Version page to add to my newest version slash build