we are currently using the requestAutomaticPassPresentationSuppression API in my app. to prevent the Wallet interface from appearing when an NFC/RF reader is detected during active app usage. Recently, a new transit card supporting Express Mode (T-money Transit Card) was released in Korea, and we are seeing an increasing number of users enabling Express Mode. However, this has introduced an issue where users are unable to use the BLE-based functionality we provide via our widget. Specifically, when the user taps our widget, it triggers a BLE signal broadcast for approximately 10 seconds. In this scenario, when the user brings their iPhone close to our reader, Express Mode is activated before the BLE interaction can be established. This prevents the BLE signal from being successfully received and processed. We would like to ask: Is it possible to suppress Express Mode behavior (similar to requestAutomaticPassPresentationSuppression) even when the app is launched via a widget interaction? Alternatively, is there any way to delay or defer Express Mode activation temporarily when launching from a widget or during BLE communication? We would appreciate any guidance or best practices you can share regarding this scenario. Thank you.

We are experiencing intermittent 403 Forbidden errors during Apple Pay on web merchant validation in our production and sandbox environment. Has anyone else started seeing 403 Forbidden errors recently (since mid-2025)? Why would merchant validation be sometimes successful and sometimes fail with 403? Could this be related to new Apple Pay gateway changes or stricter validation rules? Any additional debug steps or permanent solutions we should try? Thank you.

Hello, We are experiencing an issue with Apple Pay integration in our application. We are using WKWebView to handle various payment methods, but we are unable to complete payments via Apple Pay. Upon debugging the WKWebView, we received the following error message: "400 No required SSL certificate was sent" when attempting to process the payment. Currently, we are using a Let's Encrypt SSL certificate. Could you please confirm whether this certificate is suitable for Apple Pay, or if we should be using a different SSL certificate?

I am facing an issue with Apple Pay js while doing the integration we are using reference https://applepaydemo.apple.com/apple-pay-js-api In this I can generate the merchantSession correctly But when I pass that merchantSession in session.completeMerchantValidation(merchantValidation) as per documentation It is getting failed and also no appropriate error is being shown in the console

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

When I use my iPhone to scan the apple pay QR code in chrome, the url is https://applepaydemo.apple.com/apple-pay-js-api, I keep geting the "Service Unavailable" error. Wonder know if you guys meet this error as well? Btw, the QR code feature needs IOS 18.

Hello Apple Devs, We’re currently trying to integrate Apple Pay on the web using Apple Pay JS. We've followed the official documentation closely, but we're running into a blocker during the merchantSession validation phase. We successfully retrieved a merchantSession, which looks like this: json { "displayName": "Our Name", "domainName": "https://pay.ourdomain.co", "epochTimestamp": , "expiresAt": ****************, "merchantIdentifier": "", "merchantSessionIdentifier": ", "nonce": "", "operationalAnalyticsIdentifier": our name "t:", "pspId": "", "retries": 0, "signature": "*****************..." } Issue: Shortly after initiating the session, we receive a cancel event with the following info: ApplePayCancelEvent { type: "cancel", sessionError: { code: "unknown", info: {} } } We're unsure what causes the cancellation. There are no clear error messages or hints in the logs to identify what went wrong. What We’ve Checked: The merchantSession is returned successfully from our backend. The domainName matches our frontend domain (https://pay.durdomain.co). The session hasn’t expired when tested. We're using Apple Pay JS APIs as described in the documentation. Help Needed: What can trigger an ApplePayCancelEvent with an "unknown" error code? Any insight or guidance would be deeply appreciated. Thanks in advance!

I have a question regarding the file apple-developer-merchantid-domain-association.txt. I understand that this file is used during API access for Apple Pay Web payments. However, is it necessary for our company to access this file during the payment process? Also, this domain validation file is expected to be placed in the publicly accessible “.well-known” folder on our web server. Is it acceptable for this file to remain readable by third parties on the Internet, including Apple’s servers, without posing any security risks? Since this file is generated during domain registration on the Apple Developer site and is unique to our domain, we believe there should be no security concerns even if accessed by third parties. However, are there any specific security requirements for this domain validation file? Please note that the domain validation has already been successfully completed. We appreciate your time and look forward to your guidance. Best regards,

We have developed Apple Wallet Extension for our App. The in-app provisioning for the card is working. However when we try to add the card from Wallet extension it gives error saying "Your issuer does not yet offer support for this card". From the apple documentation we can see the issues is same as mentioned in Scenario 2 at following link https://applepaydemo.apple.com/in-app-provisioning#8.4 We are getting eligibilityStatus as 0 Below is the response from Wallet captured using SysDiagnosis https://crt-pod1-smp-device.apple.com:443/broker/v4/devices/0434320BCB1A90022306073796318273728D0A367FA927F4/cards 200 Time profile: 1.77856 seconds { x-conversation-id = ...... Content-Type = "application/json" x-pod = "crt-pod1" x-xss-protection = "1; mode=block" Server = "Apple" x-pod-region = "paymentpass.com.apple" regionbrokerurl = "https://crt-pod1-smp-device.apple.com:443/broker" Date = "Wed, 06 Aug 2025 11:39:30 GMT" Content-Length = "488" x-envoy-upstream-service-time = "1400" Strict-Transport-Security = "max-age=31536000; includeSubdomains" cross-origin-opener-policy = "same-origin" x-keystone-correlationid = ...... x-content-type-options = "nosniff" Vary = "accept-language" x-frame-options = "SAMEORIGIN" } { applicationIdentifier = ......; auxiliaryCapabilities = { }; cardType = 4; deviceProvisioningDataExpected = 1; eligibilityStatus = 0; identifier = ......; learnMoreURL = "https://www.apple.com/ae/apple-pay/banks/ae/en-ae.html"; nonce = ......; paymentApplications = ( { appletTypeIdentifier = Argon; paymentType = Credit; } ); region = "paymentpass.com.apple"; sanitizedPrimaryAccountNumber = 7008; sanitizedPrimaryAccountPrefix = ""; }

When accessing https://applepaydemo.apple.com/payment-request-api, the "Approve with Side Button" prompt is displayed, but it does not appear when using our test domain. I implemented the Payment Request API based on the sample source code from the following URL. On an iPhone device, the Apple Pay payment screen is displayed, but the "Approve with Side Button" icon below the amount does not appear, and instead a spinning loading icon is shown continuously. Could you please help identify the cause? ■ Reference URL: https://applepaydemo.apple.com/payment-request-api ■ Changed parameter: "merchantIdentifier": "〇〇.dev" ■ Accessed domain: 〇〇test.com ■ Test device: iPhone 13 iOS: 18.4.1

We are developing an app which allows users to generate a HSBC virtual card using Mastercard API and add this card to an apple wallet. Staging test was passed successfully, but we are stuck in a production test phase. T&C is not even visible, 'Card is not added' is popped on a screen before that. User taps “Add to Apple Wallet” → we present PKAddPaymentPassViewController → they tap Next → after a few seconds the flow fails with "Set Up Later" alert. FB22332303 (MCDeanPortal app: In-App Provisioning Production Test fails) Thank you

Hi, we are implementing the push provisioning via the Apple Wallet Extension starting from the example at https://developer.apple.com/documentation/passkit/implementing-wallet-extensions. To correctly manage the push provisioning on Apple Watch, specifically for a card tokenised in the iPhone but not in the Watch, we need to know if there is a connected Apple Watch to the iPhone. We are using the following code from the Apple Wallet Extension example to detect whether there is a connected watch: WCSession* session = [WCSession defaultSession]; session.delegate = delegate; [session activateSession]; In the main target of the app, at the end of the activation the system correctly calls the delegate method: session:activationDidCompleteWithState:error: but we noticed it is not being called in the UI extension context (the one having NSExtensionPointIdentifier: com.apple.PassKit.issuer-provisioning.authorization). We don't understand why the delegate is not being called in the UI extension, can you please help? Thanks! Steps to Reproduce: Start with a card not added in the Apple Wallet app Open the Apple Wallet app Click on add card Select the app to launch the Wallet Extension flow The Apple Wallet Extension with UI is on screen and invokes the activateSession method, the delegate method is not invoked and session.isPaired returns "no". Xcode Version 16.2 macOS Version 15.6.1 (24G90) Feedback ID FB20082564

Hi, We're experiencing an issue with verifying our domain for Apple Pay on the web. It's currently stuck in the "Pending" state despite meeting the listed requirements. The domain in question has been verified once successfully but one month later when we renewed the SSL, we were unable to verify the domain again. Please note that the new certificate's CA chain has been changed. A) The "apple-developer-merchantid-domain-association.txt" file is publicly accessible at the following location: /.well-known/apple-developer-merchantid-domain-association.txt B) We've also ensured that the following IP ranges are whitelisted: 17.32.139.128/27 17.32.139.160/27 17.140.126.0/27 17.140.126.32/27 17.179.144.128/27 17.179.144.160/27 17.179.144.192/27 17.179.144.224/27 17.253.0.0/16 17.23.4.96/27 17.132.108.64/26 17.23.24.32/27 17.23.19.0/27 17.157.40.128/27 17.157.44.128/27 17.157.32.0/27 C) Our servers support TLS 1.2 already. D) "ECDHE-RSA-AES128-GCM-SHA256" cipher suite has been used, so we believe all necessary criteria are satisfied. However, when we attempt to verify the domain, we receive the following error message: "Domain verification failed. Review your TLS Certificate configuration to confirm that the certificate is accessible and a supported TLS Cipher Suite is used." Could you please advise why the verification is failing, or let us know if there's anything we might have missed? Best regards, Mehdi

你好，我们6月1日收到比较多的韩国用户反馈购买我们的内购以后，系统会在稍后的几分钟再次多次从用户的卡里扣出相应的款项，但是我们没有办法第一时间反馈给你们，导致很多用户流失，请问我们怎么才能第一时间联系到你们，还有我们怎么才能第一时间知道是你们的系统是否某个功能出了问题，是否也有相应的论坛我们可以第一时间看到你们相关问题的报道，这样我们排查问题就没那么辛苦，感谢

Hello, I'm experiencing an irregular issue with Apple Pay merchant domain verification. As you know, Apple requires domain verification every two months to maintain Apple Pay functionality. The problem is that while the verification sometimes happens automatically without any issues, other times it fails to complete, even though the required file "apple-developer-merchantid-domain-association.txt" is correctly available on our server. When automatic verification fails, the Apple Pay service becomes non-functional on our website, forcing us to perform a manual verification to restore the pending service. Is it normal to encounter such inconsistent automatic verification processes? What could be causing these intermittent verification failures, whereas manual verification always succeed? suggesting this might not be related to IP address restrictions described on the Apple documentation. Thank you in advance,

我是一个银行app开发人员，请问怎么将银行名称显示在苹果钱包“选取银行”列表中，实现用户点击跳转银行app进行免输卡号签约绑定，是否有详细接入步骤和文档？

Bank Accounts details are outdated and status is stack on processing with error: "Your banking updates are processing, and you should see the changes in 24 hours. You won't be able to make any additional updates until then." This is now stack for a few years since we activated a previous Apple developer account. we must change banking details as it holds up development of an app with in-app purchases. Finance department has been contacted and they do not answer What shall we do? senior support staff keep referring to finance department and is not helping

We have used the ApplePayRecurringRequest parameter required for Apple Pay subscriptions, but during testing the payment, the Apple Pay payment page shown to the user remains the same as the one-time payment page, without any subscription information. Could you please check if there is an issue with our parameters or if there is an issue with the merchantIdentifier being used? Here is the ApplePayRequestData that we are using. { "supportedMethods": "https://apple.com/apple-pay", "data": { "version": 3, "merchantIdentifier": "***", "merchantCapabilities": [ "supports3DS", "supportsCredit", "supportsDebit" ], "supportedNetworks": [ "visa", "masterCard" ], "countryCode": "US", "recurringPaymentRequest": { "paymentDescription": "A description of the recurring payment to display to the user in the payment sheet.", "regularBilling": { "label": "Recurring", "amount": "4.99", "paymentTiming": "recurring", "recurringPaymentStartDate": "2025-06-02T16:00:00.000Z" }, "trialBilling": { "label": "7 Day Trial", "amount": "0.00", "paymentTiming": "recurring", "recurringPaymentEndDate": "2025-06-02T16:00:00.000Z" }, "billingAgreement": "A localized billing agreement displayed to the user in the payment sheet prior to the payment authorization.", "managementURL": "https://applepaydemo.apple.com", "tokenNotificationURL": "https://applepaydemo.apple.com" }, "additionalLineItems": [ { "label": "7 Day Trial", "amount": "0.00", "paymentTiming": "recurring", "recurringPaymentEndDate": "2025-06-02T16:00:00.000Z" }, { "label": "Recurring", "amount": "4.99", "paymentTiming": "recurring", "recurringPaymentStartDate": "2025-06-02T16:00:00.000Z" } ] }

During the in‑app provisioning flow, we successfully obtain the provisioning certificates and generate object for posting. However, in the production environment the flow fails when posted to a broker. broker/v4/devices/{SEID}/cards The staging environment works correctly and provisioning completes without issues. Object {encryptedCardData, activationData, ephemeralPublicKey} is build. The T&C screen never appears. FB22332303

Hello, I am following up on my previous feedback (Feedback ID: FB17175593) regarding the in-app provisioning failure for Apple Pay. In that report, I detailed errors encountered during the card addition process (notably issues related to a missing teamID and cryptographic material errors). Could you please provide an update on the investigation progress? I appreciate your assistance and look forward to your response.