Hi, I’ve been trying to integrate Apple Pay, but for some reason, the payment button is not showing up. The project is built with Laravel 11 and Vue. I imported the script as follows: <script crossorigin crossorigin src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js" ></script> Then I added the following the steps: <style> apple-pay-button {{ --apple-pay-button-width: --apple-pay-button-width: 150px;; --apple-pay-button-height: --apple-pay-button-height: 30px;; --apple-pay-button-border-radius: --apple-pay-button-border-radius: 3px;; --apple-pay-button-padding: --apple-pay-button-padding: 0px 0px;; --apple-pay-button-box-sizing: border-box; } </style> <apple-pay-button buttonstyle="black" type="plain" locale="en-US"></apple-pay-button> I followed all the steps from the official Apple Pay demo: https://applepaydemo.apple.com/ I also configured the Content Security Policy (CSP) to allow all necessary resources. However, when I test my integration, the button doesn’t appear. I’ve checked the console, but there are no errors. At the same time, I have my certificate imported into the Keychain, and I’ve completed the entire process of creating both the certificate and the private key. However, when I try to validate the session using the certificate and key with Apple’s API, I get an error: 400 The SSL certificate error https://apple-pay-gateway-cert.apple.com/paymentservices/

Hi. I am writing to request clarification regarding the renewal period of the merchant certificate. According to the documentation, Apple issues merchant certificates for 25 months, and this has been the case for several years. However, in the past six months, the issued certificates have been valid for only 3 months, which causes significant inconvenience. I have reviewed the documentation again and contacted support, but I was only referred back to the same information stating that the certificate should be valid for 25 months. Could you please clarify whether there have been any recent changes to the renewal policy? Additionally, is there a way to extend the certificate's validity to the expected 25-month period? I would greatly appreciate your assistance in resolving this issue.

During the development of our 3D game project, we encountered high memory usage requirements. To address this, we enabled Apple’s Extended Virtual Addressing (EVA) and Increased Memory Limit services. We have confirmed that both services were enabled in the developer backend as well as in Xcode, and we also used updated development and distribution certificates when building the app. However, in our validation process, it seems that EVA and Increased Memory Limit are not taking effect — the game still experiences memory overflow and crashes. Could you please advise: The correct steps to properly use Extended Virtual Addressing and Increased Memory Limit; How we can confirm whether these services are functioning as expected?

I'm currently working on an AppIntent in my app to import Apple Pay transactions via Transaction triggers in Shortcuts. While I can access the transaction name with the following code: @Parameter(title: "Transaction") var transaction: String I'm not sure how to retrieve the full details of the transaction, including: Card or Pass Merchant Amount Name At the moment, transaction only provides the name as a string, but I need access to the complete transaction data. I know that by selecting specific fields like Amount, Merchant, etc., I can retrieve each piece of data individually, but it would be much easier and more user-friendly to simply retrieve the entire transaction object at once. Has anyone successfully retrieved all details of an Apple Pay transaction in this context, and if so, could you share how to do so?

Hi, we are implementing ID&V and there is a requirement regarding the flow for Apple Pay. In order to clarify the case I will describe the use case scenario or steps to reproduce first: add a card to the iPhone wallet app (yellow path verification required). Do not complete the ID&V process. add a card to the Watch via the Wallet inside the iPhone Watch app (yellow path verification required). Same as before, do not complete the ID&V complete ID&V process using the Issuer App either from iPhone or Watch. the Issuer app receives the application:openURL:options: callback on its AppDelegate. In the options dictionary, we can not see the UIApplicationOpenURLOptionsSourceApplicationKey populated (it is nil). At this moment, for the card we are adding there are now two tokens, both to be verified via ID&V process. One is on the iPhone and one is on the Apple Watch associated with the same iPhone. The url received at step 4 contains the serial number which identifies the digitized card and matches with both the tokens in the iPhone and in the Apple Watch. We need something to detect programmatically if the digitization process started from the iPhone Wallet app or from the wallet inside the Watch app. Could you please help us to identify how we could discriminate if the ID&V process has been started for the iPhone token or for the Apple Watch token? Thanks

We have used the ApplePayRecurringRequest parameter required for Apple Pay subscriptions, but during testing the payment, the Apple Pay payment page shown to the user remains the same as the one-time payment page, without any subscription information. Could you please check if there is an issue with our parameters or if there is an issue with the merchantIdentifier being used? Here is the ApplePayRequestData that we are using. { "supportedMethods": "https://apple.com/apple-pay", "data": { "version": 3, "merchantIdentifier": "***", "merchantCapabilities": [ "supports3DS", "supportsCredit", "supportsDebit" ], "supportedNetworks": [ "visa", "masterCard" ], "countryCode": "US", "recurringPaymentRequest": { "paymentDescription": "A description of the recurring payment to display to the user in the payment sheet.", "regularBilling": { "label": "Recurring", "amount": "4.99", "paymentTiming": "recurring", "recurringPaymentStartDate": "2025-06-02T16:00:00.000Z" }, "trialBilling": { "label": "7 Day Trial", "amount": "0.00", "paymentTiming": "recurring", "recurringPaymentEndDate": "2025-06-02T16:00:00.000Z" }, "billingAgreement": "A localized billing agreement displayed to the user in the payment sheet prior to the payment authorization.", "managementURL": "https://applepaydemo.apple.com", "tokenNotificationURL": "https://applepaydemo.apple.com" }, "additionalLineItems": [ { "label": "7 Day Trial", "amount": "0.00", "paymentTiming": "recurring", "recurringPaymentEndDate": "2025-06-02T16:00:00.000Z" }, { "label": "Recurring", "amount": "4.99", "paymentTiming": "recurring", "recurringPaymentStartDate": "2025-06-02T16:00:00.000Z" } ] }

We have an app that uses the pass-presentation-suppression entitlement and calls requestAutomaticPassPresentationSuppression to prevent the Wallet app from being presented when the device is displaying a barcode to a barcode/nfc reader. This works as expected for users of the standard Apple Wallet app. However, it does not prevent third-party wallet apps from being launched, which hides the barcode and prevents it from being scanned properly. What options do I have to prevent third-party wallet apps from launching or interfering while our app is actively presenting a barcode?

Hi Team, For last 24 hours one of our team members is unable to login to apple dev portal due to two factor authentication not being sent. Error we are getting is "Verification codes can't be sent to this phone number at this time. Please try again later"

Hello, We are experiencing an issue with Apple Pay integration in our application. We are using WKWebView to handle various payment methods, but we are unable to complete payments via Apple Pay. Upon debugging the WKWebView, we received the following error message: "400 No required SSL certificate was sent" when attempting to process the payment. Currently, we are using a Let's Encrypt SSL certificate. Could you please confirm whether this certificate is suitable for Apple Pay, or if we should be using a different SSL certificate?

We have been informed by a third-party subscription tracking service(Adjust) that, due to the following specification of App Store Connect, it is not possible to connect an STG app (a non-published testing app) with their server: Specification: Since Apple’s API only allows access for apps that are already published, it is not possible to enable subscription tracking for iOS apps that are not yet published. Could you please confirm if our understanding of this specification is correct? Additionally, is there any method or recommended approach to verify subscription tracking behavior with an STG (non-published) app before the app is released? Thank you very much for your support.

Team, We are currently checking out on Apple Pay using ALL and MRU as currencies. We have authorized the payment via Touch ID; however, we are not receiving the onPaymentAuthorized event. Could you please confirm if Apple Pay supports ALL and MRU currencies? We have confirmed that it works with other currencies. Thank you!

Our company sells insurance and we'd like to offer annual renewals via Apple Pay on the Web. Most of the docs seem to point towards using recurringpaymentrequest but this method required an amount value which would only be calculated at renewal time. It appears that Shopify is doing something akin to what we want where they do auto payments so my question is can we do annual payments with unknown renewal prices with Apple Pay for Web ? What we cannot do is show the renewal price like this as it being insurance is almost certain to change. This is our current code which works but won't get past the regulator. const applePayPaymentRequestAnnual = { countryCode: 'GB', currencyCode: 'GBP', supportedNetworks: ['visa', 'masterCard'], merchantCapabilities: ['supports3DS'], requiredBillingContactFields: ['postalAddress', 'email'], requiredShippingContactFields: ['phone'], recurringPaymentRequest: { paymentDescription: 'Annual Insurance Renewal', regularBilling: { label: 'Annual Renewal Premium', amount: price, paymentTiming: "recurring", recurringPaymentIntervalUnit: "year", recurringPaymentStartDate: year + "-" + month + "-" + day + "T00:00:00.000Z", type: 'final' }, managementURL: window.location.protocol + '//' + window.location.host + '/manage-policy', tokenNotificationURL: window.location.protocol + '//' + window.location.host + '/apple-pay-notifications' }, lineItems: [{ label: alabel, amount: price, }], total: { label: alabel, amount: price, type: "final" }, }

My client has provided me with admin access to the Apple Developer console. However, when I log in, I am prompted to enroll in the Apple Developer Program. Should I proceed with the enrollment myself, or does the client need to complete the enrollment from their own account?

Hi, For one of my projects, I am using the Web Drop-in component of Adyen PSP on a Salesforce B2B Commerce site. One of the payment methods is Apple Pay. The payment method is rendered, but the Apple Pay button is not clickable. We tried debugging it but could not identify the root cause. Could you advise how this issue can be fixed? Thanks

Hi team at Apple, here is a scenario we came across: The order of priority of payment methods in Apple Wallet follows: Credit Debit Apple Cash Our app displays a payment sheet that excludes credit cards. Instead of a debit card, the default payment option shown to the user on the payment sheet is Apple Cash. Is this a known issue or have we configured something wrong in our end?

Currently, on our Production environment, when calling https://apple-pay-gateway.apple.com/paymentservices/paymentSessio,n we are randomly receiving: "Payment Services Exception merchantId={Value} unauthorized to process transactions on behalf of merchantId={Value} reason={Value} is not a registered merchant in WWDR and isn't properly authorized via Mass Enablement, either." Since launching Apple Pay on our platform we have received a new Domain Verification File and looking at some of the Domain Verification File that are hosted on the domains they are different to ours. Questions around the Domain Verification File Would we have to update every single Domain Verification File every time we receive a new one ? Does the paymentSession verfiy/call the Domain Verification File on the domain listed at https://[DOMAIN_NAME]/.well-known/apple-developer-merchantid-domain-association ? What happens if the Domain Verification File doesnt match the one that we currently have ? Would we have to regrester our Domains everytime we get a new Domain Verification File ?

What is the version policy for the Apple Pay SDK Javascript ? The documentation refers to this link : https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js The future updates will overrride the file on that link ? Is there a way to be notified of any changes ? We are using a previous version named v1 : https://applepay.cdn-apple.com/jsapi/v1/apple-pay-sdk.js What are the risks not using changing to the lastesdt link ? Thank you for your help.

我是一个银行app开发人员，请问怎么将银行名称显示在苹果钱包“选取银行”列表中，实现用户点击跳转银行app进行免输卡号签约绑定，是否有详细接入步骤和文档？

Hello! We use Apple's "master account" scheme to register new clients trough API due to the fact that the number of merchant IDs in a developer account cannot exceed 100 records. It's been almost a year since we successfully used the master account ( ex. "merchant.com.xxx") and register clients via Postman. At the moment, the certificates for the master merchant ID start to expire on July 11 which will affect all customers which is under Master ID. We know that when updating certificates at the identifier level(our master id), new universal identity certificate files that we use to send to the merchants (merchant_id.pem, privkey.key) will be generated for authentication on the merchant side, as well as a new keystore. Since many of our clients are integrated with current files and keystores and have live traffic, we would like to know—is it possible to update certificates on the master account without changing the keystores and certificate identities? The impossibility of this will entail a large gap when switching to new certificates. Thanks in advance for your answer.

I am trying to play around on the Apple Pay demo page (https://applepaydemo.apple.com) and I am getting the following error response. PaymentRequest AbortError: The operation was aborted. I am using the Payment Request API