I bought a new iPhone 16 recently and connected with my car (Hyundai Venue) I couldn't able to see WhatsApp. I researched and found some forum, but the suggested steps are not workable or not suitable for latest iOS version. I have updated iOS and WhatsApp, nothing helped to resolve. Note: Earlier I was used Pixel phone I can able to see Whatsapp and I can make a call

Hey there! Hope you are starting the year with great joy. My situation I'm building a new product that is based on detecting certain text on screen in realtime. The product is only targeted for Mac and it's built with Swift My problem I need to get the exact position of a text element with the Apple Accessibility API but I can't figurate it out. I managed to get the AXUIElement where the text is placed but it's position is too broad and off target. My discoveries so far I've tried OCR but is too slow for what I'm building, so the only possible way I can think of is with the Accessibility API. Thank you in advanced.

Hello, In our app we provide a button that initiates a phone call using tel://. For normal numbers, tapping the button presents the standard iOS confirmation sheet with Call and Cancel. If RTT is enabled on the device, the sheet instead shows three options: Call, Cancel, and RTT Call. However, when dialing a national emergency number, this confirmation dialog does not appear at all — the call is placed immediately, without giving the user the choice between voice or RTT. Is this the expected system behavior for emergency numbers on iOS? 
And if so, how does RTT get applied in the emergency-call flow — is it managed entirely by the OS rather than exposed as a user-facing option? Thanks in advance for clarifying.

I am working on capturing 48MP images using the iPhone 16 Pro Max with the Ultra-wide camera. I’ve updated the code to capture the maximum supported dimensions with the following snippet: if #available(iOS 16.0, *) { photoOutput.maxPhotoDimensions = device.activeFormat.supportedMaxPhotoDimensions.last! photoSettings.maxPhotoDimensions = .init(width: 5712, height: 4284) } However, I’m still not getting the expected results. My goal is to capture 48MP images, and I want to confirm if the Ultra-wide camera supports this resolution or if I’m missing any other configuration. Any guidance would be appreciated!

Dear developer team, After updating to iOS 18.3.1 I noticed the font in the Notes app became too small to read comfortably, and I have already got poor eyesight. There is no way to increase the font size. When I select my preferred text size through Accessibility settings, it only changes the size of headings in the Notes app but the text remains too small in the note itself. I’m using the IPhone 13. I googled the issue and seems like other users across the Internet are also unhappy about the lack of ability to change the text size in Notes to suit their comfortable levels. I hope that this issue will be addressed by developers in the next version of the iOS because the reading size in the standard app can affect health for the tired and diminished eyesight. Kind regards, Maria

In our application we are using a Search bar in a pop over view and we have enabled Accessibility full keyboard access and we are using external keyboard. Now if the focus is on Searcher that time by next Tab key press Search bar will dismiss and focus needs to shift to the next UIElement.

The issue described here in this stack overflow conversation is still an issue today when it comes to the read back of the last 4 digits in the phone numbers for North American numbers as minus. Is there a solution other than overriding the accessibleLabel property?

I would like to enable the option to resize windows with the apple pencil pro. I tried but I see that this feature is not enabled.

I checked the latest release notes for latest beta, and there doesn't seem to be a fix for this. But basically, the vibrations that you receive for when you long press a message to react, or hold down on an app in Home Screen, seem to stop working after a while. This issue is reoccurring randomly. Steps to repro: Not fully sure on this, but I'm on iPhone 16 pro max and running the iOS 18.3 dev beta described in the title. I have the default haptics enabled in which you receive a vibration when you long press on a message in iMessage or Messenger, and also when you long press on an app on the Home Screen. These seem to stop working, along with any other vibrations apart from calls and notifications) after a while. The only workaround is to restart the iPhone entirely. anyone else face the same?

I did the 18.3 update over the weekend and every contact and their information (family names, addresses, photos etc) that was added to my phone over the last year is completely gone. I’ve spent hours on the phone with Apple and their “top” senior account employees with no resolution. I am told my case has been escalated to engineering and they will get back to me in one week. I have zero confidence my issue will be resolved. I’ve gone over and over every action done over the weekend and the only thing I did was erase some emails and do the update. There has to be a way they can see every action made on my phone to find the issue.

i downloaded ios 18.2 and siri returned to the old ios 17 siri.iIt wont respons.i have to click the button many times to respond and when it does it goes away.also genmoji isnt downloading i have iphone 15 pro max

Haptic or Sound queue to allow for the accessibility of the blind (sound) and deaf population (haptic) for even knowing when location services and the camera were last used? Also, the grey notification rather than the purple notification for location services should appear for the full 24 hours after an application has used the app, if the correct description is within the "copy" of Settings The green light lets them know that the application has changed to the camera and fade out orange light both could even have subtle simply click sounds, like a shutter, big haptic, softer sound, but editable in Settings, of course

I made a (very simple) custom tab bar in SwiftUI. It's simply an HStack containing two buttons. These buttons control the selection of a paged TabView. This works well, but in VoiceOver they don't behave like the bottom tab bar or e.g. a segmented picker. Specifically, VoiceOver does not say something like "tab one of two" when the first button is focused. According to my research, in UIKit this can be accomplished by giving the container view the accessibility trait tabBar, hiding it as an accessibility element and give it the accessibility container type semanticGroup. In SwiftUI, there is also the trait isTabBar, but that does not seem to have any impact for VoiceOver. I don't see an equivalent of semanticGroup in SwiftUI. I tried accessibilityElement(children: .contain) but that also does not seem to have any impact. So, is there any way in SwiftUI to make a button behave like a tab-button in VoiceOver? And how is SwiftUI's isTabBar accessibility trait supposed to be used?

I have a couple follow up questions after the "Accessibility technologies group lab". I know it was briefly mentioned that user feedback is an excellent way to grow inclusivity in the design an app and utilizing these forums were one for example. Is inviting folks here on the forum via test flight a reasonable approach to this for a solo developer? Are there other strategies, avenues, or examples to promote user feedback?

Hello everyone, I’d like to report an issue I’ve encountered when using a Bluetooth mouse together with AssistiveTouch on iPhone running iOS 16.5. This has also been reported via Feedback Assistant with Feedback ID: FB17806167 Description: When using a Bluetooth mouse together with AssistiveTouch on iPhone (iOS), the pointer behaves incorrectly in landscape orientation. Specifically: The pointer cannot move past the center of the screen Horizontal and vertical (X/Y) movements appear to be swapped or misaligned Natural movement of the pointer is not possible It seems as if the internal coordinate mapping remains locked in portrait orientation, even when the device is physically rotated to landscape. This issue occurs system-wide, regardless of the current app. It is observable in Settings, on the Home screen, and in third-party apps. Steps to Reproduce: Enable AssistiveTouch Connect a Bluetooth mouse to the iPhone Rotate the device to landscape orientation Try moving the mouse pointer across the screen → Notice that: Pointer cannot move past the center Horizontal/vertical input is interpreted incorrectly (as if still in portrait) Expected Behavior: The mouse pointer should move across the entire screen correctly, regardless of device orientation. Actual Behavior: In landscape orientation, the pointer is either restricted to part of the screen or misaligned. It behaves as if the device is still in portrait. Horizontal mouse movement causes vertical pointer movement, and vice versa User experience feels broken and unintuitive Feature Suggestion: Please improve the synchronization between physical device orientation and AssistiveTouch pointer mapping on iOS. I also suggest exposing AssistiveTouch orientation control via a public API, so developers can help maintain consistent pointer behavior. Thanks in advance for any insights or suggestions. Best regards, Jannis

Hello, I’m in the process of enrolling my business (Carzo Rent A Car, Prishtine, Kosovo) in the Apple Developer Program, but I have been waiting for my D-U-N-S number to be issued. I submitted the request to Dun & Bradstreet on July 28, 2025 (Case #9142648) and have only received a system-generated email with a tracking ID (#9086421). There has been no further update. My questions are: Is there a way for Apple to expedite or provisionally approve my enrollment while the D-U-N-S number is pending? How long does Apple typically wait for D&B updates before the enrollment is affected? Are there any alternative steps I can take to avoid further delays? Thank you for your guidance.

I'd like to add borders to all buttons in the iOS simulator from my Mac app. First I get the simulator window. Then I access the children of all AXGroup and if it's a button or a static text, I add a border. But for some buttons this does not work. In the example image the NavigationBarButtons are not found. I guess the problem is, that for some AXGroup the children array access with AXChildren is empty. Here is some relevant code: - (NSArray<DDHOverlayElement *> *)overlayChildrenOfUIElement:(AXUIElementRef)element index:(NSInteger)index { NSMutableArray<DDHOverlayElement *> *tempOverlayElements = [[NSMutableArray alloc] init]; NSLog(@">>> -----------------------------------------------------"); NSString *role = [UIElementUtilities roleOfUIElement:element]; NSRect frame = [UIElementUtilities frameOfUIElement:element]; NSLog(@"%@, role: %@, %@", element, role, [NSValue valueWithRect:frame]); NSArray *lineage = [UIElementUtilities lineageOfUIElement:element]; NSLog(@"lineage: %@", lineage); NSArray<NSValue *> *children = [UIElementUtilities childrenOfUIElement:element]; if (children.count < 1) { NSLog(@"NO CHILDREN"); } for (NSInteger i = 0; i < [children count]; i++) { NSValue *child = children[i]; AXUIElementRef uiElement = (__bridge AXUIElementRef)child; NSString *role = [UIElementUtilities roleOfUIElement:uiElement]; NSRect frame = [UIElementUtilities frameOfUIElement:uiElement]; NSLog(@"----%@, role: %@, %@", child, role, [NSValue valueWithRect:frame]); } NSLog(@"<<< -----------------------------------------------------"); for (NSInteger i = 0; i < [children count]; i++) { NSValue *child = children[i]; AXUIElementRef uiElement = (__bridge AXUIElementRef)child; NSString *role = [UIElementUtilities roleOfUIElement:uiElement]; NSRect frame = [UIElementUtilities frameOfUIElement:uiElement]; NSLog(@"%@, role: %@, %@", child, role, [NSValue valueWithRect:frame]); if ([role isEqualToString:@"AXButton"] || [role isEqualToString:@"AXTextField"] || [role isEqualToString:@"AXStaticText"]) { NSString *tag = [NSString stringWithFormat:@"%ld%ld", (long)index, (long)i]; NSLog(@"tag: %@", tag); DDHOverlayElement *overlayElement = [[DDHOverlayElement alloc] initWithUIElementValue:child tag:tag]; [tempOverlayElements addObject:overlayElement]; } else if ([role isEqualToString:@"AXGroup"] || [role isEqualToString:@"AXToolbar"]) { [tempOverlayElements addObjectsFromArray:[self overlayChildrenOfUIElement:uiElement index:++index]]; } else if ([role isEqualToString:@"AXWindow"]) { [self.overlayWindowController setFrame:[UIElementUtilities frameOfUIElement:uiElement]]; [tempOverlayElements addObjectsFromArray:[self overlayChildrenOfUIElement:uiElement index:index]]; } } return [tempOverlayElements copy]; } For some AXGroup the children are found. For some they are empty. I cannot figure out why. Does anyone have an idea what I'm doing wrong?

有在Info.plist配置权限使用说明（NSLocalNetworkUsageDescription），App本地网络权限也已经打开，但App请求局域网设备接口时，仍返回异常： Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x302d79d40 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_NSURLErrorNWPathKey=unsatisfied (Local network prohibited), interface: en0[802.11], ipv4, uses wifi, _kCFStreamErrorCodeKey=50, _kCFStreamErrorDomainKey=1}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask .<1>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask .<1>" ), NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLStringKey=http://192.168.1.1:80/xxx, NSErrorFailingURLKey=http://192.168.1.1:80/xxx, _kCFStreamErrorDomainKey=1}

At present, in iOS, if using the in-house app, there may be crashes in the new iOS 18.3 and later versions, but it works normally on other phones and the certificate is not problematic. A total of 3 machines were found, and there was no pattern between the machines and the system, with different models and versions. We tested it on a machine that crashes, but the app downloaded from the store doesn't. If the same app is packaged and installed directly in the development tool, it will crash. Is this related to compatibility with the new version of IOS? Is there a solution? Do others also have relevant situations?

I'm working on a ble connected device that use ancs and system clock to receive alarm notification events for earing impaired people. It used to work until iPhone 13 with latest iOS 18.x. Starting with iPhone 14 onward (iOS 18.x), system clock alarm notification is not sent anymore. Is There any reason for this to happening?. Is anyone aware of this behaviour? Any suggestion would be really appreciated. Cheers