Hi, I’m trying to better understand how AVAssetDownloadConfiguration selects video variants when downloading HLS content for offline playback. Suppose I have an HLS master playlist (.m3u8) that contains several video variants defined with #EXT-X-STREAM-INF. For example, the master playlist may contain multiple video streams like this: Same resolution, different BANDWIDTH Or different resolutions (for example 720p, 1080p, etc.) My question is: How many video variants are actually downloaded when using AVAssetDownloadConfiguration without specifying any variantQualifiers? In other words: If the master playlist contains multiple video variants, will the download task fetch only one variant, or multiple variants? Does the behavior differ depending on whether the variants differ only by BANDWIDTH or also by RESOLUTION? What I observed in testing In my tests, I always end up with only one video variant downloaded, specifically the one with the highest BANDWIDTH parameter. In the m3u8 files I tested, all video variants had identical parameters (resolution, codec, frame rate, etc.) and differed only by the BANDWIDTH attribute in the master playlist. However, when inspecting the downloaded .movpkg, I noticed something interesting in boot.xml. It lists two video streams: one with complete="true" (the one with highest bandwidth) another with complete="no" (the one with lowest bandwidth) I actually had 3 video streams listed in m3u8, but the one with middle bandwidth wasn't listed in boot.xml file at all. There are also additional streams for audio and subtitles in boot.xml file. This made me wonder whether the system initially attempts to download another video variant (possibly a lower bitrate one), but then switches to the highest-quality variant and only completes that one. Additional question about variantQualifiers If I provide a predicate such as: NSPredicate(format: "peakBitRate > 0") which should theoretically match all variants, will the download task attempt to download all matching video variants, or will it still select only one? Summary So the main questions are: Without variantQualifiers, does AVAssetDownloadConfiguration always download a single video variant, and if so, how is it chosen? Does the behavior differ if variants have different resolutions vs only different bitrates? When a predicate matches multiple variants, can multiple video variants actually be downloaded in a single .movpkg? Why might boot.xml list multiple video streams when only one appears to be fully downloaded? Any clarification on the intended behavior would be greatly appreciated. Thanks!

I have exhausted standard debugging approaches and need guidance on Final Cut Pro's AU plugin loading behavior. PLUGIN OVERVIEW My plugin is an AUv2 audio plugin built with JUCE 8. The plugin loads and functions correctly in: Pro Tools (AAX) Media Composer (AAX) Reaper (AU + VST3) Logic Pro (AU) GarageBand (AU) Audacity (AU) DaVinci Resolve / Fairlight (AU) Harrison Mixbus (AU) Ableton Live (AU) Cubase (VST3) Nuendo (VST3) It does NOT load in Final Cut Pro (tested on 10.8.x, macOS 14.6 and 15.2). DIAGNOSTICS COMPLETED auval passes cleanly: auval -v aufx Hwhy Manu → AU VALIDATION SUCCEEDED Plugin is notarized and stapled: xcrun stapler validate → The validate action worked spctl --assess --type exec → Note: returns 'not an app' which we understand is expected for .component bundles. Hardened Runtime is enabled on the bundle. We identified that our Info.plist contained a 'resourceUsage' dictionary in the AudioComponents entry. We found via system logs that this was setting au_componentFlags = 2 (kAudioComponentFlag_SandboxSafe), causing FCP to attempt loading the plugin in-process inside its sandbox, where our UDP networking is denied. We removed the resourceUsage dict, confirmed au_componentFlags = 0 in the CAReportingClient log, and FCP now loads the plugin out-of-process via AUHostingServiceXPC_arrow. Despite au_componentFlags = 0 and out-of-process loading confirmed, the plugin still does not appear in FCP's effects browser. We also identified and fixed a channel layout issue — our isBusesLayoutSupported was not returning true for 5-channel layouts (which FCP uses internally). This is now fixed. AU cache has been fully cleared: ~/Library/Caches/com.apple.audio.AudioComponentRegistrar /Library/Caches/com.apple.audio.AudioComponentRegistrar coreaudiod and AudioComponentRegistrar killed to force rescan auval -a run to force re-registration

I am conducting a forensic examination of a video, and it would be helpful if anyone knew how to decode the LiveTrackInfo of the metadata of a QuickTake .MOV recorded on iOS 17.5.1 There are 27 different fields, and I am not sure what each one represents. Any help would be appreciated! Thank you! log-file

I'm relatively new to Swift development (and native iOS development for that matter) I've got an iOS app that uses the iPhone / iPad built in cameras, and am looking to make this more compatible with macOS. Using the normal AVCaptureDevice.DiscoverySession I seem to get the iPhone Continuity Camera and the in-built MacBook Pro camera but I don't see other input devices that I see in QuickTime Player (for example) such as connected external cameras or Virtual Inputs provided by NDI Virtual Input and OBS. Is there a way to see access these without a specific Mac build (as the rest of the functionality works great, and I'd rather not diverge the codebase too much as it's easier to update one app than two!

I made a CMIOExtension (a virtual camera) which generates its own output, for use in our in-house software testing. I wanted to make a video source with 29.97, 30, 59.94 and 60fps output. To this end, I created a CMIOExtensionDeviceSource which creates a CMIOExtensionDevice with one CMIOExtensionStreamSource with various stream formats contained in [CMIOExtensionStreamFormat], including one with both maxFrameDuration and minFrameDuration = CMTimeMake(value: 1000, timescale: 30000) and another with both maxFrameDuration and minFrameDuration = CMTimeMake(value: 1001, timescale: 30000) I've held off on the creation of the 59.94/60fps source for now until this problem is resolved. my virtual camera works, it produces a signal, but when I examine its associated AVCaptureDevice in the debugger, I find (lldb) po self.captureDevice?.formats[0].videoSupportedFrameRateRanges[0].maxFrameDuration ▿ Optional<CMTime> ▿ some : CMTime - value : 1000000 - timescale : 30000000 ▿ flags : CMTimeFlags - rawValue : 1 - epoch : 0 I get the same value, 1000000/30000000, or exactly 30fps, for all the formats of my AVCaptureDevice. Is there something I'm doing wrong, or do CMIOExtensionDevices always round the frame rates? I can't force CoreMediaIO to produce frames at exactly my desired frame interval, but I'd like to ensure that the average frame rate is my desired rate. How can I do that? Frame emission is governed by a repeating DispatchSourceTimer with a repeat time specified in nanoseconds with the TimerFlags set to 'strict'.

The front facing camera on iPhone 16 (and every model previous) gives the following values for AVCaptureDevice.RotationCoordinator.videoRotationAngleForHorizonLevelCapture: 90 degrees portrait 180 degrees landscape left 270 degrees for upside-down 0 degrees for landscape right Using these values a transform is calculated: var transform: CGAffineTransform { let degrees = rotationCoordinator.videoRotationAngleForHorizonLevelCapture let radians = degrees * .pi / 180.0 return CGAffineTransform(rotationAngle: radians) } And then applied to the AVAssetInput: videoInput = AVAssetWriterInput(mediaType: .video, outputSettings: videoSettings, sourceFormatHint: videoFormatDescription) videoInput.transform = transform And this ensures the correct transform is added to the metadata so that the recorded video plays in the correct orientation. However, with the iPhone 17 Pro and iPhone 17 Pro Max front facing cameras, AVCaptureDevice.RotationCoordinator.videoRotationAngleForHorizonLevelCapture return the different values: 0 degrees portrait 90 degrees landscape left 180 degrees for upside-down 270 degrees for landscape right So this approach breaks down, and the video orientation is incorrect. How is this intended to be handled?

Hello, As far as I know and in all of my testing there is no way for a user or a developer to change the frame rate of the video output on iPadOS. If you connect an iPad via a USB Hub or a USB to HDMI Adaptor and then connect it to an external monitor it will output at 59.94fps. I have a video app where a user monitors live video at 25fps and 30fps, they often output to an external display and there are times when the external display will stutter due to the mismatch in frame rate, ie. using 25fps and outputting at 59.94fps. I thought it was impossible to change the video output frame rate, then in V3.1 of the Blackmagic Camera App I saw an interesting change in their release notes: ‘Support for HDMI Monitoring at Sensor Rate and Resolution’ This means there is some way to modify it, not sure if this is done via a Private API that Apple has allowed Blackmagic to use. If so, how can we access this or is there a way to enable this that is undocumented? Thanks!

Has anyone tried to make an ILPD based AIME file? When I try the resulting AIME switches to USDZ Mesh instead of saving the ILPD Data.

I have found that following code runs without issue from Xcode, either in Debug or Release mode, yet crashes when running from the binary produced by archiving - i.e. what will be sent to the app store. import SwiftUI import AVKit @main struct tcApp: App { var body: some Scene { WindowGroup { VideoPlayer(player: nil) } } } This is the most stripped down code that shows the issue. One can try and point the VideoPlayer at a file and the same issue will occur. I've attached the crash log: Crash log Please note that this was seen with Xcode 26.2 and MacOS 26.2.

Facing an issue with audio playback using AVPlayerViewController in iOS application. We are using the native player to play recorded audio files. When the AVPlayerViewController appears, the native user interface is displayed correctly, including the playback controls and the volume slider. However, when the user interacts with the volume slider The slider UI moves and responds to touch events. The actual audio output volume does not change. The audio continues playing at the initial volume level regardless of the slider position. We initialize the player and present it modally using the following code: AVPlayerViewController *avController = [[AVPlayerViewController alloc] init]; avController.player = [AVPlayer playerWithURL:videoURL]; // Setting initial volume avController.player.volume = 1.0f; avController.modalPresentationStyle = UIModalPresentationOverFullScreen; avController.allowsPictureInPicturePlayback = NO; // Present the controller [self presentViewController:avController animated:YES completion:nil];

hello, I'm using VideoTololbox VTFrameRateConversionConfiguration to perform frame interpolation: https://developer.apple.com/documentation/videotoolbox/vtframerateconversionconfiguration?language=objc ,when using 640x480 vidoe input, I got error: Error ! Invalid configuration [VEEspressoModel] build failure : flow_adaptation_feature_extractor_rev2.espresso.net. Configuration: landscape640x480 [EpsressoModel] Cannot load Net file flow_adaptation_feature_extractor_rev2.espresso.net. Configuration: landscape640x480 Error: failed to create FRCFlowAdaptationFeatureExtractor for usage 8 Failed to switch (0x12c40e140) [usage:8, 1/4 flow:0, adaptation layer:1, twoStage:0, revision:2, flow size (320x240)]. Could not init FlowAdaptation initFlowAdaptationWithError fail tried 2048x1080 is ok.

We’re developing an AVFoundation-based video recording app (4K @ 60 fps required for biomechanical analysis). On most devices this works perfectly (iPhone 12/14/15/16 non-Pro models), but on several iPhone Pro models (12 Pro, 13 Pro, 14 Pro, 15 Pro/Pro Max), we consistently get 4K 30 fps recordings—even when the device should support 4K 60 fps on the wide-angle camera. What we observe We configure the session for .hd4K3840x2160. We iterate through AVCaptureDevice.formats and select formats that: have 3840×2160 resolution support ≥60 fps (videoSupportedFrameRateRanges) On some Pro devices, this format search returns no results, even though: The Camera app records 4K60 fine. External references list the wide camera as 4K60 capable. The fallback becomes the device's default 4K30 format, so final files are 3840×2160 @ 30 fps. This happens immediately on app launch (not after heating), so not thermal-related. What we’ve tried Force selecting .builtInWideAngleCamera instead of dual/triple cameras. Disabling HDR (videoHDREnabled = false). Disabling low-light boost. Allowing 59.94 fps formats (in case exact 60.0 isn’t exposed). Logging all videoSupportedFrameRateRanges per format. What we’re seeing in logs On affected Pro devices, the capture device reports only 4K formats with maxFrameRate ≈ 30 fps, despite the hardware being able to do 4K60. Main question Has anyone encountered cases where 4K60 formats are available in the Camera app but not exposed through AVFoundation, especially on Pro models or multi-camera devices? Could HEVC/HDR capability or multi-camera constraints be preventing certain formats from appearing? Are there known conditions where 4K60 formats are hidden unless specific device configuration is applied? Any guidance on reliably locking 4K60 on iPhone Pro models via AVFoundation would be hugely appreciated.

Hello, I requested Fairplay credentials a week ago. Where can I check the status of my request? Thank you very much. The team ID is: 6WZ8SVRYV9

I want to confirm if this is a bug or a programming error. Very easy to reproduce it by modifying AVCam sample code. Steps to reproduce: Add AVCaptureVideoDataOutput to AVCaptureSession, no need to set delegate in AVCam sample code (CaptureService actor) private let videoDataOutput = AVCaptureVideoDataOutput() and then in configureSession method, add the following line try addOutput(videoDataOutput) if videoDataOutput.availableVideoPixelFormatTypes.contains(kCVPixelFormatType_420YpCbCr8BiPlanarFullRange) { videoDataOutput.videoSettings = [kCVPixelBufferPixelFormatTypeKey as AnyHashable as! String : kCVPixelFormatType_420YpCbCr8BiPlanarFullRange] } And next modify set HDR method: /// Sets whether the app captures HDR video. func setHDRVideoEnabled(_ isEnabled: Bool) { // Bracket the following configuration in a begin/commit configuration pair. captureSession.beginConfiguration() defer { captureSession.commitConfiguration() } do { // If the current device provides a 10-bit HDR format, enable it for use. if isEnabled, let format = currentDevice.activeFormat10BitVariant { try currentDevice.lockForConfiguration() currentDevice.activeFormat = format currentDevice.unlockForConfiguration() isHDRVideoEnabled = true if videoDataOutput.availableVideoPixelFormatTypes.contains(kCVPixelFormatType_420YpCbCr10BiPlanarVideoRange) { videoDataOutput.videoSettings = [kCVPixelBufferPixelFormatTypeKey as AnyHashable as! String : kCVPixelFormatType_420YpCbCr10BiPlanarVideoRange] } } else { captureSession.sessionPreset = .high isHDRVideoEnabled = false if videoDataOutput.availableVideoPixelFormatTypes.contains(kCVPixelFormatType_32BGRA) { print("Setting sdr pixel format \(kCVPixelFormatType_32BGRA)") videoDataOutput.videoSettings = [kCVPixelBufferPixelFormatTypeKey as AnyHashable as! String : kCVPixelFormatType_32BGRA] } try currentDevice.lockForConfiguration() currentDevice.activeColorSpace = .sRGB currentDevice.unlockForConfiguration() } } catch { logger.error("Unable to obtain lock on device and can't enable HDR video capture.") } The problem now is toggling HDR on and off no longer works in video mode. If after setting HDR on, you set HDR to off, active format of device does not change (setting sessionPreset has no effect). This does not happen if video data output is not added to session. Is there any workaround available?

I believe this should work: CFMutableDictionaryRef attrs = CFDictionaryCreateMutable(kCFAllocatorDefault, 0, &kCFTypeDictionaryKeyCallBacks, &kCFTypeDictionaryValueCallBacks); CFDictionaryAddValue(attrs, kCVImageBufferColorPrimariesKey, kCVImageBufferColorPrimaries_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferTransferFunctionKey, kCVImageBufferTransferFunction_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferYCbCrMatrixKey, kCVImageBufferYCbCrMatrix_ITU_R_709_2); CVPixelBufferRef pixelBuffer = NULL; CVPixelBufferCreate(kCFAllocatorDefault, width, height, kCVPixelFormatType_32ARGB, attrs, &pixelBuffer); assert(CFDictionaryGetCount(CVBufferGetAttachments(pixelBuffer, kCVAttachmentMode_ShouldPropagate)) > 0); But that last assert fails, so it appears the color info does not get attached. kCVImageBufferColorPrimariesKey and the others are not one of the keys listed under BufferAttributeKeys, but I think they're supposed to be allowed because they're listed by CMVideoFormatDescriptionGetExtensionKeysCommonWithImageBuffers(). I'm hoping that putting the color matrix info in there will control how AVAssetWriter converts the RGB to YCbCr.

Playback of any kind of HD H.264 MP4 files (720p, 50fps) could randomly cause a stalled image. Playback does not stop in such a case. Image is frozen/stalled. Audio goes on. Timeline goes on. By tapping play/pause or scrubbing in the timeline, the playback recovers. It could also happen, if you are scrubbing in the timeline, especially to areas not loaded already (progressive MP4 download). Behaviour is always the same: image is stalled/frozen, audio goes on. To reproduce: use example project https://developer.apple.com/documentation/AVKit/playing-video-content-in-a-standard-user-interface Example file: https://www.keepinmind.info/test.mp4

Adding both AVCaptureMovieFileOutput and AVCaptureVideoDataOutput is supported in AVCaptureSession as seen in documentation (copied snippet below) but then when AVCaptureDevice is configured with ProRes422 codec, it fails unless one of the two outputs is removed from the capture session. It is very much reproducible on iPhone 14 pro running iOS 26.0. Prior to iOS 16, you can add an AVCaptureVideoDataOutput and an AVCaptureMovieFileOutput to the same session, but only one may have its connection active. If you attempt to enable both connections, the system chooses the movie file output as the active connection and disables the video data output’s connection. For apps that link against iOS 16 or later, this restriction no longer exists.

When trying to record ProRes RAW (btp2) with AVAssetWriter I get several types of errors: -12780 or -11875. I wonder if recording ProRes RAW can only be done through AVCaptureMovieFileOutput, or if there a way to correctly configure AVAssetWriter to do it.

I'm using the SwiftUI Photos Picker to select videos from the users Photos library and then opening the video using the PhotosPickerItem. I'm looking for a way to allow the user to open the same video on their other devices as the app uses SwiftData and CloudKit to provide access to a recently watched list of videos. The URL from the PhotosPickerItem appears to be device specific and so I was looking to see if I can use the itemIdentifier and then the init that takes the itemIdentifier to create the PhotosPickerItem on the other devices. The itemIdentifier however is always nil and so wouldn't be able to be used in this way. Is there an alternative approach whereby the users can open a video using a PhotosPickerItem and that item would be viewable on their other devices with an item identifier or a URL that is device agnostic. This approach should also not involve copying the video into other storage as it would simply expand the use of the users iCloud storage, providing a less than ideal user experience. If the user has opened the video from their Photos library, there should be a way to allow the same user (e.g. same Apple ID), to use the same app on another device to open the video again.

iPhoneで撮影した映像をブラウザのアプリへ送信して画面に映す機能を持ったアプリを開発しています。 iPhone 17 Pro, 17 Pro Maxでこのアプリを利用するとブラウザ側に表示される映像が緑一色や、緑がメインのカラフルな映像になってしまいます。 調べてみると17Proと17ProMaxで超広角カメラと望遠カメラの画素数が変更になっている（1200万画素→4800万画素）ためエンコーディングで失敗しているのではないかと疑っています。 なんでも情報下さい。 環境情報 WebRTCライブラリ： GoogleWebRTC バージョン 1.1 (CocoaPodsで導入) シグナリングサーバー： AWS Kinesis Video Streams 問題が発生するデバイス： モデル名: iPhone18,1, OS: 26.0 モデル名: iPhone18,1, OS: 26.1 問題が発生しないデバイス： iPhone17,5 以前の多数のモデル モデル名: iPhone18,1, OS: 26.0 モデル名: iPhone18,3, OS: 26.0