Hi, I’m encountering an issue in my app’s Wallet Extension, specifically within the Non-UI Extension, where we are unable to retrieve payment passes bound to a user’s account. The same code that successfully retrieves these bound cards in the main app does not work when used in the Non-UI Extension. Case-ID: 8932090 Steps to Reproduce: Set up In-App Provisioning: Ensure that the app has the necessary In-App Provisioning permissions. This functionality works correctly in the main app, confirming that the permissions are properly configured. Configure Wallet Extensions: Follow the Wallet Extensions documentation to configure the app, including all required settings for the Non-UI Extension. Add Code to Retrieve Payment Passes: In the main app’s LoginView, implement the following code in the handleLogin() method to retrieve payment passes: // Get the identifiers of payment passes that already exist in Apple Pay. paymentPassLibrary = self.passLibrary.passes(of: .secureElement) for pass in paymentPassLibrary { if let identifier = pass.secureElementPass?.primaryAccountIdentifier { if pass.isRemotePass && pass.deviceName.localizedCaseInsensitiveContains("Apple Watch") { remotePassIdentifiers.insert(identifier) } else if !pass.isRemotePass { passIdentifiers.insert(identifier) } } } Verify Functionality in Main App: Run the app and verify that the code successfully retrieves the payment passes bound to the user’s account. Implement Code in Non-UI Extension: Add the same code to the Non-UI Extension, specifically in the WNonUIExtHandler class within the override func status(completion: @escaping (PKIssuerProvisioningExtensionStatus) -> Void) method. Test in Wallet Extension: Run the Wallet Extension and observe that the payment passes are not retrieved when the code is executed in the Non-UI Extension. Has anyone encountered a similar issue or can provide insight into why the code might not work in the Non-UI Extension compared to the main app? Support Information: iOS Version: 17.5.1 Development environment: Xcode 15.4 (15F31d), macOS 14.3 (23D56) Any help or suggestions would be greatly appreciated. Thank you!

Hello Dear Network, We are developing a banking application and are implementing Apple Wallet In-App Provisioning with Wallet UI and Non-UI extensions. Our App Store submission fails with the error: "Missing entitlement com.apple.developer.payment-pass-provisioning" for both Wallet UI and Non-UI extensions. In the Apple Developer portal, we do not see the "Apple Pay" or "In-App Provisioning" capabilities available for our App ID or extension App IDs. We would like to request enablement of: Apple Pay Payment Pass Provisioning In-App Provisioning for our Apple Developer Team and related App IDs. Please let us know what we need to do for can upload build with that Entitlements, what can be problem? Thank you.

Hello, I'm using PassKit with to perform Apple Pay payment in a financial application. Our approach are: On iOS application, define PKMerchantCapability threeDSecure and credit, perform apple pay experience and get the encrypted response. On PCI service, receive the encrypted data Payment token, decrypt this data, and use to perform the payment. The problem is, in MasterCard transaction the eciIndicator is missing. I want to know if has some rule or problem about it.

I have a problem generating the domain certificate for a merchant id it gives me an error but when using the URL that Apple uses to validate said within the .well-known if the file can be loaded

Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

We’re attempting to call the Apple Pay Web Merchant Registration API using our Platform Integrator flow and consistently receive 401 Unauthorized, despite successful TLS/mTLS. Details: Endpoint: https://apple-pay-gateway-cert.apple.com/paymentservices/registerMerchant (POST) Payload: { "domainNames": ["breakerfy.com"], "encryptTo": "platformintegrator.ai.packman", "partnerInternalMerchantIdentifier": "merchant.ai.packman.1", "partnerMerchantName": "breakerfy", "merchantUrl": "https://breakerfy.com" } Domain association: URL: https://breakerfy.com/.well-known/apple-developer-merchantid-domain-association What we tried: We created a Payment Platform Integrator ID (platformintegrator.ai.packman) We created a CertificateSigningRequest We used the certificate signing request to create an Apple Pay Platform Integrator Identity Certificate and downloaded the signed certificate. We exported the Private Key from keychain access in PKCS 12 format We converted both the private key and the signed certificate to PEM format We created a merchant id We used the converted keys to send requests to the API We received { "statusMessage": "Payment Services Exception Unauthorized", "statusCode": "401" } we also tried curl with the original p12 file and also had no luck. What could be the issue ?

Hi, When I try to add a card to wallet, I get this PKPassKitErrorDomain Code=2 error from my logs, and from the SysDiagnose, I get some more detailed error log Error details: Date: December 15, 2025 Time: 15:16 UTC Request URL: https://nc-pod9-smp-device.apple.com:443/broker/v4/devices/041B4183BA1490022104102123315131EBFE2BE7… Response: HTTP Status: 500 – Internal Server Error Time profile: 0.505452 seconds Response headers: Server: Apple Content-Type: text/html X-Content-Type-Options: nosniffStrict-Transport-Security: max-age=31536000; includeSubdomainsDate: Mon, 15 Dec 2025 15:16:59 GMT X-Frame-Options: SAMEORIGIN X-XSS-Protection: 1; mode=blockCross-Origin-Opener-Policy: same-origin Content-Length: 170 Connection: close Response body: Anyone have faced this problem before?

I recently created a Sandbox account and successfully added an Apple Pay test MasterCard to the sandbox Wallet to run a test. Yesterday, I created a different account and tried to add a MasterCard on another device, but I received a "Card device limit" error. I then deleted the card from the original device (where it had been successfully added) and tried to re-add it, but this device also failed. I was able to confirm that a JCB card can be added, but I need to test with MasterCard. What should I do to resolve this?

For Apple Pay Testing purposes, we're trying out cards from https://developer.apple.com/apple-pay/sandbox-testing/ Visa, AMEX, Discover cards can be added to the wallet. But all 5 of the listed options for Mastercard cannot be added to the wallet with the error "Card Device Limit". How can we resolve this?

When I use my iPhone to scan the apple pay QR code in chrome, the url is https://applepaydemo.apple.com/apple-pay-js-api, I keep geting the "Service Unavailable" error. Wonder know if you guys meet this error as well? Btw, the QR code feature needs IOS 18.

During checkout at apple.com using a non-supported Apple Pay on the Web browser, apple.com presents a QR like code offering to "Scan Code with iPhone" to pay. The payment continues using Apple Pay on the iPhone after scan. We already offer Apple Pay and Apple Pay on the Web. Is this QR code option available for us for non-supported browsers? Could you point me to the docs to add it? Thank you.

Hello, I'm experiencing an irregular issue with Apple Pay merchant domain verification. As you know, Apple requires domain verification every two months to maintain Apple Pay functionality. The problem is that while the verification sometimes happens automatically without any issues, other times it fails to complete, even though the required file "apple-developer-merchantid-domain-association.txt" is correctly available on our server. When automatic verification fails, the Apple Pay service becomes non-functional on our website, forcing us to perform a manual verification to restore the pending service. Is it normal to encounter such inconsistent automatic verification processes? What could be causing these intermittent verification failures, whereas manual verification always succeed? suggesting this might not be related to IP address restrictions described on the Apple documentation. Thank you in advance,

Hi, I understand that it's possible to add a virtual debit or credit card from a mobile app into the iOS Wallet using PassKit from the Apple SDK. However, I haven't come across documentation on how to achieve this directly from a web app. I found this article on Apple's support site (https://support.apple.com/en-gb/guide/security/secdc2567239/web), which mentions adding cards from a card issuer’s website, but it doesn’t provide details on the process. Could you please confirm if it's possible to add a card directly from a web app without using a mobile app? If so, could you guide me to the relevant documentation? Thanks in advance!

I developed a web app using .net c#. The app runs a workflow which included Apple payment. App can work on any browser of any device (even non-IOS). When the app is browsed using PC windows Chrome browser, the payment sheet will show with QR code to scan using iPhone. If I cancelled the pop-up by clicking on X without scanning the code, and then returned to idle screen and performed another payment, I will reach paymentRequest.Show() but nothing will show and no errors are logged in console. Note that: I use Payment Request API The issue appear on the second payment. The issue will be solved once I refresh the page. My app supports both single and separate pages mode and issue appear on both. I used to see an error "Uncaught NotSupportedError: Failed to execute 'define' on 'CustomElementRegistry': the name apple spinner has already been used with this registry. So I thought the issue might be in loading the apple SDK script multiple times, and solved the issue to be loaded only once. The error disappeared but the issue persist without errors.

We have been using ApplePay on the web for years, but we are running into a problem since today in sandbox where domainName is missing from the create payment sessions request. We haven't changed anything related to this request any time recently. Static payment sessions url being hit in sandbox: https://apple-pay-gateway-cert.apple.com/paymentservices/paymentSession request format: "merchantIdentifier": "merchant.com.identifier", "displayName": "Test Store", "initiative": "web", "initiativeContext": "test.example.com", "domainName": "test.example.com" response format: { "epochTimestamp": 1763533367972, "expiresAt": 1763536967972, "merchantSessionIdentifier": "<merchantSessionIdentifier>", "nonce": "<nonce>", "merchantIdentifier": "<merchantIdentifier>", "displayName": "Test Store", "signature": "<signature>", "initiative": "web", "initiativeContext": "test.example.com", "signedFields": [ "merchantIdentifier", "merchantSessionIdentifier", "initiative", "initiativeContext", "displayName", "nonce" ], "operationalAnalyticsIdentifier": "Test Store:<identifier>", "retries": 0, "pspId": "<pspId>" } Production create session request to https://apple-pay-gateway.apple.com/paymentservices/paymentSession is behaving as expected, sending the following fields as response: epochTimestamp, expiresAt, merchantSessionIdentifier, nonce, merchantIdentifier, domainName, displayName, signature, operationalAnalyticsIdentifier, retries, pspId Claude seems to suggest this is a response when Messages for Business is enabled, but this ApplePay Payment Processing merchant is only configured for Apple Pay on the Web. Any ideas or pointers to check for? We are worried this will spill over in production as well, which will break our ApplePay integration. Thanks in advance!

PLATFORM AND VERSION iOS Development environment: Xcode Version 16.2 (16C5032a), macOS 14.6.1 Run-time configuration: iOS 26 DESCRIPTION OF PROBLEM We would like to seek clarification on how to determine whether a card used via Apple Pay is a credit or debit card before sending the transaction request. Currently, we can retrieve the card type information (credit/debit) from the Apple Pay response payload, but this is only available after the payment has been processed. However, we need to determine the card type in advance, as our system calculates and applies transaction fees based on the card type, which should be added to the total transaction amount before submission. Could you please advise if there is any parameter, API field, or pre-authorization mechanism available to identify the card type prior to initiating the transaction request? We would appreciate your guidance or any related documentation for implementing this. STEPS TO REPRODUCE Initiate Apple pay Payment from Apple pay Getting payload we can retrieve the card type information (credit/debit) from the Apple Pay response payload, but this is only available after the payment has been processed. We need to identify if there's any way to know the card user selected(whether it is credit/debit) before processing the payment.

Hi everyone, I’m encountering a strange issue with Apple Pay in our React Native iOS app using the Stripe React Native SDK. Summary of the Problem: • Apple Pay shows up as an available payment method inside the Stripe Payment Sheet. • When I tap Apple Pay, the Apple Pay sheet opens normally. • After confirming payment, the Apple Pay sheet immediately closes, and nothing happens. • No payment is created and no request reaches Stripe’s servers. On Stripe Dashboard the PaymentIntent remains incomplete, with no errors, which means the failure happens before Stripe receives anything. Environment • React Native with @stripe/stripe-react-native • StripeProvider configured with: <StripeProvider publishableKey={...} merchantIdentifier="merchant.com.app.venga" stripeAccountId={...} urlScheme="venga" > Apple Pay works on our web checkout with the same merchant identifier. We have verified all of the required Apple Pay setup: • Merchant ID exists, active, and matches exactly. • Merchant ID added to the iOS app target in Xcode → Signing & Capabilities. • Apple Pay capability enabled. • Merchant domain is verified (web checkout works). • Apple Pay certificate and merchant certificate are valid. • Stripe publishable key and merchantIdentifier are correct. • Stripe SDK correctly initialized. • Device region supports Apple Pay. Extra Observations: • The PaymentIntent’s allowed_payment_methods includes "card" and Apple Pay does appear in the payment sheet. • But after tapping Pay → the Apple Pay sheet closes instantly. • There is no callback with an error, and nothing appears in Stripe logs. • We are testing in Sweden. As far as I know Apple Pay should work fine here. Questions: What could cause the Apple Pay sheet to dismiss instantly after attempting a payment? Could this be caused by a merchant ID mismatch—even if Apple Pay appears in the sheet? Is there any Apple-device-level requirement (region, wallet config, card type) that could cause this silent failure? Is there a way to get more detailed logs when Apple Pay closes before Stripe receives anything? Any help or suggestions would be greatly appreciated. Thanks!

I’m restructuring my business and want to remove Apple Pay. I use Woocommerce Square for payments. Do I do it in the Square dashboard or here? I honestly can’t remember how I set it up. I’m not a developer. I’m a farmer and work on my own website. Thanks!

I am adding In-App provisioning to my app. I am able to access the Apple Pay Sandbox and I have successfully tested adding a secure element/payment pass to Apple Wallet. However, once the pass has been added to the wallet, I can not access or retrieve the pass from my app. I have confirmed with the PNO that the PNO Pass Metadata Configuration in the testing environment include the correct metadata for "associatedApplicationIdentifiers" and "associatedStoreIdentifiers". Does anyone know why I am having this issue and how I can resolve it? Steps used to access pass in Apple Wallet I am unable to view the pass when I attempt to access it using the PKPassLibrary function as follows: let library = PKPassLibrary() if #available(iOS 13.4, *) { // This returns an empty array library.passes(of: .secureElement) } else { // This also returns an empty array library.passes(of: .payment) } // This returns an empty array too library.passes() Steps used to add pass to Apple Wallet These are the steps I follow to add the card: I create a PKAddPaymentPassRequestConfiguration I use this config to instantiate a PKAddPaymentPassViewController. I provide the nonce, nonceSignature, and certificates to my PNO along with the card data. I receive the activationData, encryptedPassData, and ephemeralPublicKey from my PNO and create a PKAddPaymentPassRequest using this data. I add the pass to Apple Wallet. In the addPaymentPassViewController callback, I am able to view the pass data from the .didFinishAdding pass: PKPaymentPass? variable. I am also able to see that the pass has been added from Apple Wallet app. I am not able to access the pass using PKPassLibrary().passes() at this point. I am not able to access the pass at any point after adding it either.

When integrating the Wallet Extension, after clicking my app icon from the "From Apps on Your iPhone" list, I encountered the message: "Cannot Add Card. 'XXX' is not responding. Wait a few minutes and try again. If the problem continues, contact the card issuer's customer service" instead of the configured login page appearing as expected. What could be causing this issue, and how should I resolve it?