I have an app that downloads different pods, but they suddenly stopped: curl: (6) Could not resolve host: dl.google.com Warning: Problem : timeout. Will retry in 1 seconds. curl: (6) Could not resolve host: dl.google.com Warning: Problem : timeout. Will retry in 2 seconds. 1 retries left. curl: (6) Could not resolve host: dl.google.com Earlier it did not find https://cdn.cocoapods.org Temp issue or do you have to setup DNS of some sort?

With Xcode 26.3, and beta 26.4 (under macOS 26.4 Beta (25E5223i)) my loaded platforms for canvas and simulators keep disappearing. Try to add platforms, and the download just sits there.

I've yet to encounter these errors when running UI tests locally, but I'd estimate that 80-90% of my test runs on Xcode Cloud fail due to it. I'm just testing with iPhone simulators, I've set it to retry on failure, but no luck. Is there a setting or something I can tweak in my test code to improve the situation? I am on the latest xcode/iOS dev betas - but it was doing this before I switched to them from.

Hi, I am attempting to setup Xcode Cloud for my project. The repository for the project is in Azure Devops. When I look on the internet, I get the answer: Go to AppstoreConnect, your app, Xcode Cloud and configure the repo. However, in my version of Xcode I am immediately sent back to Xcode to configure it. When looking in this forum, I see some old Posts from 2022 and 2024 without any answer. I assume I need to pick 'Github Enterprise' as the GIT provider. If I do, It attempts to connect to devops.azure.com, which sounds about right. But then I get a permission error. I would like to configure Xcode Cloud to access Azure Devops using one of the PATs that I have configured. Has anybody been able to Mae this work? Or should I make a Mirror Repo in Github (ir BitBucket or Gitlab) and let Apple connect to that? Kind regards Wouter

I added a workflow and it seemed to work fine so lets add them all ! I added a second workflow and it seems to see the repository but not the branches in the repository. I have googled and even asked AI. Checked and it's installed with all repo access on Github Removing the repo .. adding it back Deleting the workflow and adding it back Adding the workflow from the browser Adding the workflow from XCode Nothing seems to work, but the first one I created works. Is there paid support for Xcode Cloud ? I s there a version control that works better with Xcode Cloud? Any suggestions are appreciated.

We are trying to access the Sonar and Nexus remote servers from Xcode Cloud, to see the coverage percentage and artifact upload but we are unable to do so as it says "host not resolved." Could you please help us with accessing Nexus, Sonar, Dynatrace, and other tools from Xcode Cloud? We connected to network team of organization to enable firewall but they need the Xcode cloud server ip details Regards, Bala

This appears to be the same issue as wasresolved here, but given that post is marked as solved, I thought it appropriate to open a new thread. I have no access to build artefacts for any of the App Store Connect teams I'm a member of. I have Admin or App Manager permissions for the teams I've tried. Clicking the download link for any artefact directs to a single json string: {"message":"You are not authorized to access this team’s resources."} Trying through the build navigator in Xcode 16.3 crashes Xcode.

Hello. We've built our app with Xcode cloud until now. And we faced a issue after we changed some dependencies in SPM. the problems occur while resolving below dependencies https://github.com/naver/naveridlogin-sdk-ios-swift https://github.com/navermaps/SPM-NMapsMap with below message. xcodebuild: error: Could not resolve package dependencies: failed downloading 'https://repository.map.naver.com/archive/pod/NMapsMap/3.21.0/NMapsMap.zip' which is required by binary target 'NMapsMapBinary': downloadError("A server with the specified hostname could not be found.") failed downloading 'https://repository.map.naver.com/archive/pod/NMapsGeometry/1.0.2/NMapsGeometry.zip' which is required by binary target 'NMapsGeometry': downloadError("A server with the specified hostname could not be found.") is there a way to handle this error by ourselves? we need your help. thank you.

I am taking this error. I tried everything , changing repository, manually edit checksum but it seems that its not working. [!] Error installing boost Verification checksum was incorrect, expected f0397ba6e982c4450f27bf32a2a83292aba035b827a5623a14636ea583318c41, got 79e6d3f986444e5a80afbeccdaf2d1c1cf964baa8d766d20859d653a16c39848 Error Command exited with non-zero exit-code: 1 Warning Running ci_post_clone.sh script failed (exited with code 1). Executable scripts are run using the interpreter specified in the shebang line.

I have an XCode Cloud CI/CD process that's been in place for over a year now, hooked up to the project's GitLab repository. Yesterday it lost connection to the repo, and I can't get it to reconnect. Here's the error I see when I click on the "reconnect" button: The repo still exists, obviously, and I still have maintainer access. I did notice that my private key that I use to connect XCode to GitLab had expired, so I created a new one, but that didn't resolve the issue. Another thing I noticed is that when I try to look at my builds in the console, it tells me to link my gitlab account with my Apple account: But when I click the Link Accounts button, nothing happens. Is there a different way to link the accounts? Is it possible that's what the issue is?

I'm getting this error, don't really understand why... Showing All Errors Only Build Archive Export archive for ad-hoc distribution Command exited with non-zero exit-code: 70 Command exited with non-zero exit-code: 70 Export archive for development distribution Command exited with non-zero exit-code: 70 Command exited with non-zero exit-code: 70 Export archive for app-store distribution Command exited with non-zero exit-code: 70 Command exited with non-zero exit-code: 70 Activity Log Complete 6/26/25, 10:06 PM 0.4 seconds

We just changed the repository from Bitbucket > Github. While all connected successfully, none of the branches are appearing. I understand usually it takes time (cache etc) but its been a good few hours. Also tried to remove the integration and re-setup but to no avail.

Hi! For the past few days I have been experiencing slower builds in my workflows, without a clear reason of the cause as sometimes they run with the old usual time. I tried contacting the Developer Support without success in finding out the reason of these issues, the case number was 102661768064. As an example, I have a workflow for Pull request checks that involves testing and analyzing. This usually ran for 11-15mins, but now it could take up to 30mins or more. Looking into the logs it just seems that the machine it's particularly slow, then in another build it goes with usual times again. As an example, below are the summaries of two builds of the same branch: Being in the free tier, these new long times are burning my free time quite faster and probably will need to look into running this checks in GitHub Actions if it doesn't improve. A hint of what might be wrong is also found in an error in the test workflow, which denotes a problem booting a simulator. Any help on this will be appreciated, thanks!

I have two apps in App Store Connect (same app but different bundle IDs), and I would like to manage workflows for both. However, when configuring workflows, although both apps appear on the list for configuration at first, selecting and configuring the first will be the only app available, since after that, there's no way to add the other app. It looks like a bug, but I couldn't find any additional reports of this case while browsing the web.

I have now signed out of my account in Xcode, quit the application, signed back in, and also cleared the Xcode derived data and cache. However, I am still receiving the 401 Unauthorized error Any operation related to Xcode Cloud (e.g., viewing the dashboard, creating a workflow) fails immediately across all Xcode projects, including brand-new empty projects. The error is consistent and always appears as: API Invalid status code: 401. Domain: XcodeCloudCombineAPI.XCCResponseError Code: 1 System Information: macOS Version 15.6.1 (Build 24G90) "details" : "Error alert: API Invalid status code: 401.: XCCResponseError(responseErrorType: XcodeCloudCombineAPI.XCCResponseError.XCCResponseErrorType.invalidStatusCode(XcodeCloudCombineAPI.LegacyHttpStatus.unauthorized), requestUrl: Optional(https://appstoreconnect.apple.com/ci/api/teams//apps/find?bundle_id=), traceId: Optional("2ab09bea8da9ef39"), retryAfterSecsStr: nil, response: Optional(<NSHTTPURLResponse: 0x600000c6a800> { URL: https://appstoreconnect.apple.com/ci/api/teams//apps/find?bundle_id=} { Status Code: 401, Headers {\n "Content-Length" = (\n 0\n );\n Date = (\n "Fri, 05 Sep 2025 10:04:07 GMT"\n );\n Server = (\n nginx\n );\n "Set-Cookie" = (\n "dqsid=; Expires=Thu, 01 Jan 1970 00:00:00 GMT; Path=/; Secure; HTTPOnly",\n "dqsid=eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpYXQiOjE3NTcwNjY2NDQsImp0aSI6IlNQZ1FxVXd1UFF1UjI1X2wtZ2ZjN2cifQ.uoE9MRTx-TCY03Sw1qgMBcWrPVA8adtKd-nOZVwllS4; Max-Age=1800; Expires=Fri, 05 Sep 2025 10:34:04 GMT; Path=/; Secure; HTTPOnly"\n );\n "Strict-Transport-Security" = (\n "max-age=31536000; includeSubDomains; preload"\n );\n "x-apple-jingle-correlation-key" = (\n ZNGYRW2NJQJKAYDKU5FGCY6VVE\n );\n "x-b3-traceid" = (\n 2ab09bea8da9ef39\n );\n "x-cache-status" = (\n BYPASS\n );\n "x-content-security-policy" = (\n "script-src 'self' *.apple.com"\n );\n "x-content-type-options" = (\n nosniff\n );\n "x-daiquiri-instance" = (\n "daiquiri:15751001:mr36p00it-hyhk07174801:7987:25RELEASE91:daiquiri-amp-dsce-asc-int-002-mr",\n "daiquiri:18493001:mr85p00it-hyhk03154801:7987:25RELEASE91:daiquiri-amp-all-shared-ext-001-mr"\n );\n "x-frame-options" = (\n SAMEORIGIN\n );\n "x-via" = (\n "2.0 PS-WUH-01zra68 [BYPASS]"\n );\n "x-ws-request-id" = (\n "68bab594_PS-WUH-01zra68_27159-54435"\n );\n "x-xss-protection" = (\n "1; mode=block"\n );\n} }))\nError Description: Optional("API Invalid status code: 401.")\nRecovery Suggestion: nil\nHelp Anchor: nil",

I cannot setup a workflow - every time it says "This operation could not be completed" after granting access to the source code. I removed the app from AppStore Connect, I logged out from Xcode, removed and reset the app from Github, initialized a new repository, reset Xcode Derived Data, reset the Profiles and Certificates. I tried everything and nothing worked. Any help?

Xcode 26 RC is not available on Xcode Cloud. This is a serious blocker affecting developers trying to be on App Store on day 1 of the OS 26 release. Is there an estimate when this can be in place?

So my xcode cloud build have been stuck for 12 hours, is there something wrong with me or the service isnt working rn?

Hi I have an developer app tied that is the account owner for our ABM and also for our Apple Developer account. When i go to the developer app and try to purchase additional hours it doesnt let me "Apple account cant be used to make purchases" And i am the account holder for both. The email tied to it is an "username/@/domain.appleid.com". Any help appreciated

We would like to request an enhancement to Xcode Cloud workflows to support skipping builds when a GitHub Pull Request is in Draft state. Our team frequently collaborates on pull requests that go through multiple iterations during the code review cycle. Each small commit or push triggers an Xcode Cloud workflow run, even if the PR is still in draft and not ready for final review or CI validation. This leads to: Wasted compute resources and time on draft work that is not yet intended for integration. Increased noise in Xcode Cloud logs and dashboards. Longer feedback cycles for meaningful PRs, since draft workflows compete for available concurrency. A simple option in the workflow configuration (e.g., “Skip runs for draft pull requests”) would address this problem by: Reducing unnecessary workflow executions. Freeing up capacity for production-ready and review-ready builds. Improving overall developer productivity by aligning CI runs with the actual readiness of a PR. This feature would be especially valuable for teams with frequent collaboration and long-lived PRs. Thank you for considering this request—we believe it would significantly improve the efficiency of Xcode Cloud for real-world development workflows.