Dear Apple： We found that after mirroring an iPhone and a Mac, calling the NEHotspotConfigurationManager applyConfiguration interface on the iPhone fails to connect to Wi-Fi. Are there any restrictions on using this interface in mirror mode?

Questions about FTP crop up from time-to-time here on DevForums. In most cases I write a general “don’t use FTP” response, but I don’t have time to go into all the details. I’ve created this post as a place to collect all of those details, so I can reference them in other threads. IMPORTANT Apple’s official position on FTP is: All our FTP APIs have been deprecated, and you should avoid using deprecated APIs. Apple has been slowly removing FTP support from the user-facing parts of our system. The most recent example of this is that we removed the ftp command-line tool in macOS 10.13. You should avoid the FTP protocol and look to adopt more modern alternatives. The rest of this post is an informational explanation of the overall FTP picture. This post is locked so I can keep it focused. If you have questions or comments, please do create a new thread in the App & System Services > Networking subtopic and I’ll respond there. Don’t Use FTP FTP is a very old and very crufty protocol. Certain things that seem obvious to us now — like being able to create a GUI client that reliably shows a directory listing in a platform-independent manner — aren’t possible to do in FTP. However, by far the biggest problem with FTP is that it provides no security [1]. Specifically, the FTP protocol: Provides no on-the-wire privacy, so anyone can see the data you transfer Provides no client-authenticates-server authentication, so you have no idea whether you’re talking to the right server Provides no data integrity, allowing an attacker to munge your data in transit Transfers user names and passwords in the clear Using FTP for anonymous downloads may be acceptable (see the explanation below) but most other uses of FTP are completely inappropriate for the modern Internet. IMPORTANT You should only use FTP for anonymous downloads if you have an independent way to check the integrity of the data you’ve downloaded. For example, if you’re downloading a software update, you could use code signing to check its integrity. If you don’t check the integrity of the data you’ve downloaded, an attacker could substitute a malicious download instead. This would be especially bad in, say, the software update case. These fundamental problems with the FTP protocol mean that it’s not a priority for Apple. This is reflected in the available APIs, which is the subject of the next section. FTP APIs Apple provides two FTP APIs: All Apple platforms provide FTP downloads via URLSession. Most Apple platforms (everything except watchOS) support CFFTPStream, which allows for directory listings, downloads, uploads, and directory creation. All of these FTP APIs are now deprecated: URLSession was deprecated for the purposes of FTP in the 2022 SDKs (macOS 13, iOS 16, iPadOS 16, tvOS 16, watchOS 9) [2]. CFFTPStream was deprecated in the 2016 SDKs (macOS 10.11, iOS 9, iPadOS 9, tvOS 9). CFFTPStream still works about as well as it ever did, which is not particularly well. Specifically: There is at least one known crashing bug (r. 35745763), albeit one that occurs quite infrequently. There are clear implementation limitations — like the fact that CFFTPCreateParsedResourceListing assumes a MacRoman text encoding (r. 7420589) — that won’t be fixed. If you’re looking for an example of how to use these APIs, check out SimpleFTPSample. Note This sample hasn’t been updated since 2013 and is unlikely to ever be updated given Apple’s position on FTP. The FTP support in URLSession has significant limitations: It only supports FTP downloads; there’s no support for uploads or any other FTP operations. It doesn’t support resumable FTP downloads [3]. It doesn’t work in background sessions. That prevents it from running FTP downloads in the background on iOS. It’s only supported in classic loading mode. See the usesClassicLoadingMode property and the doc comments in <Foundation/NSURLSession.h>. If Apple’s FTP APIs are insufficient for your needs, you’ll need to write or acquire your own FTP library. Before you do that, however, consider switching to an alternative protocol. After all, if you’re going to go to the trouble of importing a large FTP library into your code base, you might as well import a library for a better protocol. The next section discusses some options in this space. Alternative Protocols There are numerous better alternatives to FTP: HTTPS is by far the best alternative to FTP, offering good security, good APIs on Apple platforms, good server support, and good network compatibility. Implementing traditional FTP operations over HTTPS can be a bit tricky. One possible way forward is to enable DAV extensions on the server. FTPS is FTP over TLS (aka SSL). While FTPS adds security to the protocol, which is very important, it still inherits many of FTP’s other problems. Personally I try to avoid this protocol. SFTP is a file transfer protocol that’s completely unrelated to FTP. It runs over SSH, making it a great alternative in many of the ad hoc setups that traditionally use FTP. Apple doesn’t have an API for either FTPS or SFTP, although on macOS you may be able to make some headway by invoking the sftp command-line tool. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] In another thread someone asked me about FTP’s other problems, those not related to security, so let’s talk about that. One of FTP’s implicit design goals was to provide cross-platform support that exposes the target platform. You can think of FTP as being kinda like telnet. When you telnet from Unix to VMS, it doesn’t aim to abstract away VMS commands, so that you can type Unix commands at the VMS prompt. Rather, you’re expected to run VMS commands. FTP is (a bit) like that. This choice made sense back when the FTP protocol was invented. Folks were expecting to use FTP via a command-line client, so there was a human in the loop. If they ran a command and it produced VMS-like output, that was fine because they knew that they were FTPing into a VMS machine. However, most users today are using GUI clients, and this design choice makes it very hard to create a general GUI client for FTP. Let’s consider the simple problem of getting the contents of a directory. When you send an FTP LIST command, the server would historically run the platform native directory list command and pipe the results back to you. To create a GUI client you have to parse that data to extract the file names. Doing that is a serious challenge. Indeed, just the first step, working out the text encoding, is a challenge. Many FTP servers use UTF-8, but some use ISO-Latin-1, some use other standard encodings, some use Windows code pages, and so on. I say “historically” above because there have been various efforts to standardise this stuff, both in the RFCs and in individual server implementations. However, if you’re building a general client you can’t rely on these efforts. After all, the reason why folks continue to use FTP is because of it widespread support. [2] To quote the macOS 13 Ventura Release Notes: FTP is deprecated for URLSession and related APIs. Please adopt modern secure networking protocols such as HTTPS. (92623659) [3] Although you can implement resumable downloads using the lower-level CFFTPStream API, courtesy of the kCFStreamPropertyFTPFileTransferOffset property. Revision History 2025-10-06 Explained that URLSession only supports FTP in classic loading mode. Made other minor editorial changes. 2024-04-15 Added a footnote about FTP’s other problems. Made other minor editorial changes. 2022-08-09 Noted that the FTP support in URLSession is now deprecated. Made other minor editorial changes. 2021-04-06 Fixed the formatting. Fixed some links. 2018-02-23 First posted.

Hi there, We have been trying to set up URL filtering for our app but have run into a wall with generating the bloom filter. Firstly, some context about our set up: OHTTP handlers Uses pre-warmed lambdas to expose the gateway and the configs endpoints using the javascript libary referenced here - https://developers.cloudflare.com/privacy-gateway/get-started/#resources Status = untested We have not yet got access to Apples relay servers PIR service We run the PIR service through AWS ECS behind an ALB The container clones the following repo https://github.com/apple/swift-homomorphic-encryption, outside of config changes, we do not have any custom functionality Status = working From the logs, everything seems to be working here because it is responding to queries when they are sent, and never blocking anything it shouldn’t Bloom filter generation We generate a bloom filter from the following url list: https://example.com http://example.com example.com Then we put the result into the url filtering example application from here - https://developer.apple.com/documentation/networkextension/filtering-traffic-by-url The info generated from the above URLs is: { "bits": 44, "hashes": 11, "seed": 2538058380, "content": "m+yLyZ4O" } Status = broken We think this is broken because we are getting requests to our PIR server for every single website we visit We would have expected to only receive requests to the PIR server when going to example.com because it’s in our block list It’s possible that behind the scenes Apple runs sporadically makes requests regardless of the bloom filter result, but that isn’t what we’d expect We are generating our bloom filter in the following way: We double hash the URL using fnv1a for the first, and murmurhash3 for the second hashTwice(value: any, seed?: any): any { return { first: Number(fnv1a(value, { size: 32 })), second: murmurhash3(value, seed), }; } We calculate the index positions from the following function/formula , as seen in https://github.com/ameshkov/swift-bloom/blob/master/Sources/BloomFilter/BloomFilter.swift#L96 doubleHashing(n: number, hashA: number, hashB: number, size: number): number { return Math.abs((hashA + n * hashB) % size); } Questions: What hashing algorithms are used and can you link an implementation that you know is compatible with Apple’s? How are the index positions calculated from the iteration number, the size, and the hash results? There was mention of a tool for generating a bloom filter that could be used for Apple’s URL filtering implementation, when can we expect the release of this tool?

I have an app that uses BLE to connect to access doors. Since iOS 26, when it hasn't connected to any doors for a while, it deactivates, whereas in older versions of iOS it continues to work all day without stopping. Has anyone else experienced this? I've found problems with people who have had the same issue since upgrading to the latest version of iOS 26. Is there a known issue with BLE in iOS 26? I haven't found any official information. thnks

Apple multi-peer with 12 devices is unstable. Dear All, Has anyone tried Apple multi-peer with 12 devices connected? We are building an application relying on multi-peer where 12 Ipads will be updating data and each device needs to share data between. Can anyone tell me if we can use multi-peer framework for connecting 12 devices in the multi-peer network? We are facing stability problems in the connection when we connect 12 devices in the network.

Hello, How long does it usually take for a URL Filter request to be reviewed? It's been 2.5 weeks since we submitted the request form but we haven't received any feedback yet. Just in case, the request ID is D3633USVZZ

Hello all, Does anyone know how long it will take Apple to approve multicast entitlement approval after the Apple form is submitted? Any input would be appreciated. Thank you Allyson

What is the best way to detect if the Wifi is being used for Wireless Carplay or is just a normal network interface?

In our iOS networking related app for the app store (with network extension using packet tunnel provider), we are supposed to read the list of nameservers for the network. We use res_ninit function. This function returns only 3 items (but in reality the network has more dns servers. In my case 5. Some ipv4 and some ipv6) Looking at the header file at iOS 18.2 -> user/include/resolve.h, it shows that the __res_state struct has a maximum limit of 3 for the nsaddr_list array. It seems that the reason the res_ninit function returns only 3 values is because of this. For our code to work correctly, it needs to know all the dns servers, but we only get partial results. Is there any other api that can get us all the dns servers ?

Hi everyone, I’m developing an app called FindMyNet that allows users to find the best internet provider based on their postal code (CAP). The app is built with Xcode and the macOS simulator. I’ve set up a FastAPI backend that communicates with an Excel database containing internet provider data for each postal code. Unfortunately, when I try to run the app, I encounter an error that prevents me from retrieving data from the database and displaying the correct provider. Task <6B5C86B6-181A-4235-AE68-23AAF6645683>.<1> finished with error [1] Error Domain=NSPOSIXErrorDomain Code=1 "Operation not permitted" UserInfo={_NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <6B5C86B6-181A-4235-AE68-23AAF6645683>.<1>, _kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=1, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <6B5C86B6-181A-4235-AE68-23AAF6645683>.<1>" ), _NSURLErrorNWPathKey=satisfied (Path is satisfied), interface: en0[802.11], ipv4, dns, uses wifi} Problem description: • The FastAPI backend is running on a Raspberry Pi and communicates with the app via an HTTP request. • When I enter a postal code, the app should return the best provider for that region, but I only get a 500 error. • I’ve verified that the FastAPI server is running, but it seems there’s an issue with communication between the app and the server. Steps taken so far: • I’ve checked the logs on the FastAPI server, but there are no obvious errors. • I’ve manually tested the API using Postman, and it works fine, so the issue seems to be app-side. Support request: I’d like to understand better what could be causing this error and if anyone has had similar experiences. Any advice on diagnosing the problem or solutions for resolving it would be greatly appreciated. Thanks in advance for your help!

I have an issue that causes multiple instances of the push provider to be initialized. And I'd like to ask you what could trigger the instantiation NEAppPushProvider subclass. It seems like it's being triggered excessively. If there's documentation that I have overlooked then just show it to me and I'll be on my way. Here's the details. But really all I want to know is why is my subclass for NEAppPushProvider keeps getting initialized. If you can answer me that than maybe all these details don't really matter but here they are. Here's why I believe there's multiple push provider. I see logs for my push provider initializing but I don't see it de-initializing. I also see redundant logs showing multiple instances trying to log into my server. Each time it initializes, an additional log is added for trying to log into my server. In the app, the system saves it's configuration shortly after initialization, after saving and loading the push configuration, the app doesn't touch config. Meanwhile in the extension, after 8 or so hours, the extension starts creating a new instance of the push provider. Then a few hours later it does it again. And again. Until the watch dog kills us for wasting too much CPU. Normally on a fresh install, I'll observe turning off the wifi to call stop on the push provider and later have the push provider de-initialize. The extension maintains a socket connection to the server, the server can send it messages to display push notifications. The software runs on hospital networks, which will not have access to the internet. It seems like the connection to the server is stable from the logs. I don't detect any disconnections. I'll check with the server to confirm. In the app I call removeFromPreferences to clear out any extensions before logging in/saving push configurations. And I call saveToPreferences on the NEAppPushManager. I do this to make sure I don't have more than one push configuration saved at one time. I also have many logs looking out for this. I used the sample code from apple as the basis of the my own Push Manager. I can post code if you deem it necessary. Hope to here from you soon. Thank you.

Getting -10985 error from urlSession while attempting to make a connection. Not sure why this is happening if anyone is aware please help

I observed the following crash: Code Type: ARM-64 (Native) Parent Process: launchd [1] User ID: 0 Date/Time: 2025-10-07 13:48:29.082 OS Version: macOS 15.6 (24G84) Report Version: 12 Anonymous UUID: 8B651788-4B2E-7869-516B-1DA0D60F3744 Crashed Thread: 3 Dispatch queue: NEFlow queue Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000054 ... Thread 3 Crashed: Dispatch queue: NEFlow queue 0 libdispatch.dylib 0x000000019af6da34 dispatch_async + 192 1 libnetworkextension.dylib 0x00000001b0cf8580 __flow_startup_block_invoke.216 + 124 2 com.apple.NetworkExtension 0x00000001adf97da8 __88-[NEExtensionAppProxyProviderContext setInitialFlowDivertControlSocket:extraValidation:]_block_invoke.90 + 860 3 libnetworkextension.dylib 0x00000001b0cf8140 __flow_startup_block_invoke.214 + 172 4 libdispatch.dylib 0x000000019af67b2c _dispatch_call_block_and_release + 32 5 libdispatch.dylib 0x000000019af8185c _dispatch_client_callout + 16 6 libdispatch.dylib 0x000000019af70350 _dispatch_lane_serial_drain + 740 7 libdispatch.dylib 0x000000019af70e2c _dispatch_lane_invoke + 388 8 libdispatch.dylib 0x000000019af7b264 _dispatch_root_queue_drain_deferred_wlh + 292 9 libdispatch.dylib 0x000000019af7aae8 _dispatch_workloop_worker_thread + 540 10 libsystem_pthread.dylib 0x000000019b11be64 _pthread_wqthread + 292 11 libsystem_pthread.dylib 0x000000019b11ab74 start_wqthread + 8 ... It appears that the crash is caused by the flow director queue becoming NULL when dispatch_async is called (accessing address 0x0000000000000054). Meanwhile, my transparent proxy was still running. I'm wondering if this is a known issue or if anyone else has encountered the same problem. @eskimo

Hi! I wrote an internal used backup command line tool which is in use since several years. Today I got an error while sending an email: “Failed: ioOnClosedChannel”. I assume that the latest macOS updates did break my app. On the server I use macOS 15.7 and on my development machine macOS 26. Here is the related code: private func sendMail() { var a : [Email.Attachment] = [] if self.imageData != nil { switch self.imageType { case .tiff: a.append(Email.Attachment(name: "Statistics.tif", contentType: #"image/tiff"#, contents: ByteBuffer(bytes: self.imageData!))) case .pdf: a.append(Email.Attachment(name: "Statistics.pdf", contentType: #"application/pdf"#, contents: ByteBuffer(bytes: self.imageData!))) case .unknown: fatalError("Unimplemented attachment type!") } } mailHtml = mailHtml.replacingOccurrences(of: "<br>", with: "<br>\n") let email = Email(sender: .init(name: "Backup", emailAddress: "SENDER@MYDOMAIN"), replyTo: nil, recipients: recipients, cc: [], bcc: [], subject: self.subject, body: .universal(plain: self.mailText, html: mailHtml), attachments: a) let evg = MultiThreadedEventLoopGroup(numberOfThreads: System.coreCount) let mailer = Mailer(group: evg, configuration: smtpConfig, transmissionLogger: nil) do { print("Sending mail... ", terminator: "") try mailer.send(email: email).wait() // <-- ERROR HERE Failed: ioOnClosedChannel print("done.") } catch { print("Failed: \(error)") } do { try evg.syncShutdownGracefully() } catch { print("Failed shutdown: \(error)") } } I use https://github.com/sersoft-gmbh/swift-smtp. Any clue about the reason of this error? TIA, GreatOm

Please consider this very trivial C code, which was run on 15.3.1 of macos: #include <stdio.h> #include <stdlib.h> #include <netinet/in.h> #include <arpa/inet.h> #include "sys/socket.h" #include <string.h> #include <unistd.h> #include <ifaddrs.h> #include <net/if.h> // prints out the sockaddr_in6 void print_addr(const char *msg_prefix, struct sockaddr_in6 sa6) { char addr_text[INET6_ADDRSTRLEN] = {0}; printf("%s%s:%d, addr family=%u\n", msg_prefix, inet_ntop(AF_INET6, &sa6.sin6_addr, (char *) &addr_text, INET6_ADDRSTRLEN), sa6.sin6_port, sa6.sin6_family); } // creates a datagram socket int create_dgram_socket() { const int fd = socket(AF_INET6, SOCK_DGRAM, 0); if (fd < 0) { perror("Socket creation failed"); return -1; } return fd; } int main() { printf("current process id:%ld parent process id: %ld\n", (long) getpid(), (long) getppid()); // // hardcode a link-local IPv6 address of a interface which is down // ifconfig: // ,,, // awdl0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 // options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> // ... // inet6 fe80::34be:50ff:fe14:ecd7%awdl0 prefixlen 64 scopeid 0x10 // nd6 options=201<PERFORMNUD,DAD> // media: autoselect (<unknown type>) // status: inactive // const char *ip6_addr_str = "fe80::34be:50ff:fe14:ecd7"; // link-local ipv6 address from above ifconfig output // parse the string literal to in6_addr struct in6_addr ip6_addr; int rv = inet_pton(AF_INET6, ip6_addr_str, &ip6_addr); if (rv != 1) { fprintf(stderr, "failed to parse ipv6 addr %s\n", ip6_addr_str); exit(EXIT_FAILURE); } // create a AF_INET6 SOCK_DGRAM socket const int sock_fd = create_dgram_socket(); if (sock_fd < 0) { exit(EXIT_FAILURE); } printf("created a socket, descriptor=%d\n", sock_fd); // create a destination sockaddr which points to the above // ipv6 link-local address and an arbitrary port const int dest_port = 12345; struct sockaddr_in6 dest_sock_addr; memset((char *) &dest_sock_addr, 0, sizeof(struct sockaddr_in6)); dest_sock_addr.sin6_addr = ip6_addr; dest_sock_addr.sin6_port = htons(dest_port); dest_sock_addr.sin6_family = AF_INET6; dest_sock_addr.sin6_scope_id = 0x10; // scopeid from the above ifconfig output // now sendto() to that address, whose network interface is down. // we expect sendto() to return an error print_addr("sendto() to ", dest_sock_addr); const char *msg = "hello"; const size_t msg_len = strlen(msg) + 1; rv = sendto(sock_fd, msg, msg_len, 0, (struct sockaddr *) &dest_sock_addr, sizeof(dest_sock_addr)); if (rv == -1) { perror("sendto() expectedly failed"); close(sock_fd); exit(EXIT_FAILURE); } printf("sendto() unexpectedly succeeded\n"); // should not reach here, we expect sendto() to return an error return 0; } It creates a SOCK_DGRAM socket and attempts to sendto() to a link-local IPv6 address of a local network interface which is not UP. The sendto() is expected to fail with a "network is down" (or at least fail with some error). Let's see how it behaves. Copy that code to a file called netdown.c and compile it as follows: clang netdown.c Now run the program: ./a.out That results in the following output: current process id:29290 parent process id: 21614 created a socket, descriptor=3 sendto() to fe80::34be:50ff:fe14:ecd7:14640, addr family=30 sendto() unexpectedly succeeded (To reproduce this locally, replace the IPv6 address in that code with a link-local IPv6 address of an interface that is not UP on your system) Notice how the sendto() returned successfully without any error giving an impression to the application code that the message has been sent. In reality, the message isn't really sent. Here's the system logs from that run: PID Type Date & Time Process Message debug 2025-03-13 23:36:36.830147 +0530 kernel Process (a.out) allowed via dev tool environment (/System/Applications/Utilities/Terminal.app/Contents/MacOS/Terminal) debug 2025-03-13 23:36:36.833054 +0530 kernel [SPI][HIDSPI] TX: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 RX: 20 02 00 00 00 00 38 00 10 02 00 17 00 00 2E 00 26700 error 2025-03-13 23:36:36.838607 +0530 nehelper Failed to get the signing identifier for 29290: No such process 26700 error 2025-03-13 23:36:36.838608 +0530 nehelper Failed to get the code directory hash for 29290: No such process default 2025-03-13 23:36:36.840070 +0530 kernel cfil_dispatch_attach_event:3507 CFIL: Failed to get effective audit token for <sockID 22289651233205710 <4f3051d7ec2dce>> 26700 error 2025-03-13 23:36:36.840678 +0530 nehelper Failed to get the signing identifier for 29290: No such process 26700 error 2025-03-13 23:36:36.840679 +0530 nehelper Failed to get the code directory hash for 29290: No such process default 2025-03-13 23:36:36.841742 +0530 kernel cfil_hash_entry_log:6082 <CFIL: Error: sosend_reinject() failed>: [29290 ] <UDP(17) out so 891be95f39bd0385 22289651233205710 22289651233205710 age 0> lport 60244 fport 12345 laddr fe80::34be:50ff:fe14:ecd7 faddr fe80::34be:50ff:fe14:ecd7 hash D7EC2DCE default 2025-03-13 23:36:36.841756 +0530 kernel cfil_service_inject_queue:4466 CFIL: sosend() failed 50 Notice the last line where it states the sosend() (and internal impl detail of macos) failed with error code 50, which corresponds to ENETDOWN ("Network is down"). However, like I noted, this error was never propagated back to the application from the sendto() system call. The documentation of sendto() system call states: man sendto ... Locally detected errors are indicated by a return value of -1. ... RETURN VALUES Upon successful completion, the number of bytes which were sent is returned. Otherwise, -1 is returned and the global variable errno is set to indicate the error. So I would expect sendto() to return -1, which it isn't. The 15.3.1 source of xnu hasn't yet been published but there is the 15.3 version here https://github.com/apple-oss-distributions/xnu/tree/xnu-11215.81.4 and looking at the corresponding function cfil_service_inject_queue, line 4466 (the one which is reported in the logs) https://github.com/apple-oss-distributions/xnu/blob/xnu-11215.81.4/bsd/net/content_filter.c#L4466, the code there logs this error and the cfil_service_inject_queue function then returns back the error. However, looking at the call sites of the call to cfil_service_inject_queue(...), there are several places within that file which don't track the return value (representing an error value) and just ignore it. Is that intentional and does that explain this issue? Does this deserve to be reported as a bug through feedback assistant?

Hello team, Would this mean that content filters intended for all browsing can only be implemented for managed devices using MDM? My goal would be to create a content filtering app for all users, regardless of if their device is managed/supervised. thanks.

Hi Team, We are getting below error when we try to connect our REST APIs from our device. Our application is enterprise application and its connecting all backend calls via MobileIron Secure Tunnel(VPN). We are not encountering this error when we try to connect backend system from Simulator on VPN connected machine. We are calling 13 APIs but we are getting below error intermittently for different APIs i.e each time we are facing this issue for different APIs. We connected with our Helpdesk team to troubleshoot the error and they checked the MobileIron VPN firewall and there is no log We configured below things Allow Arbitrary Loads - True <key>NSExceptionMinimumTLSVersion</key> <string>TLSv1.2</string> We are using Alamofire library to connect backend. We disabled all site validation and we configured minTLSVersion 1.2. Please find below code snippet static let serverTrustPolicies:[String: ServerTrustEvaluating] = { var sites = [String]() sites.append("apis.xyz.com") return sites.reduce([String: ServerTrustEvaluating]()) { (dictionary, site) -> [String: Alamofire.ServerTrustEvaluating] in var dictionary = dictionary dictionary[site] = DisabledTrustEvaluator() return dictionary } }() static let manager: Session = { var serverTrustPolicies: [String: ServerTrustEvaluating] = NetworkClient.serverTrustPolicies let configuration = URLSessionConfiguration.default configuration.tlsMinimumSupportedProtocolVersion = .TLSv12 return Alamofire.Session(configuration: configuration, serverTrustManager: CustomTrustManager(evaluators: serverTrustPolicies)) }() error from Alamofire

I am trying to convert a simple URLSession request in Swift to using NWConnection. This is because I want to make the request using a Proxy that requires Authentication. I posted this SO Question about using a proxy with URLSession. Unfortunately no one answered it but I found a fix by using NWConnection instead. Working Request func updateOrderStatus(completion: @escaping (Bool) -&gt; Void) { let orderLink = "https://shop.ccs.com/51913883831/orders/f3ef2745f2b06c6b410e2aa8a6135847" guard let url = URL(string: orderLink) else { completion(true) return } let cookieStorage = HTTPCookieStorage.shared let config = URLSessionConfiguration.default config.httpCookieStorage = cookieStorage config.httpCookieAcceptPolicy = .always let session = URLSession(configuration: config) var request = URLRequest(url: url) request.httpMethod = "GET" request.setValue("text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8", forHTTPHeaderField: "Accept") request.setValue("none", forHTTPHeaderField: "Sec-Fetch-Site") request.setValue("navigate", forHTTPHeaderField: "Sec-Fetch-Mode") request.setValue("Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/18.0.1 Safari/605.1.15", forHTTPHeaderField: "User-Agent") request.setValue("en-US,en;q=0.9", forHTTPHeaderField: "Accept-Language") request.setValue("gzip, deflate, br", forHTTPHeaderField: "Accept-Encoding") request.setValue("document", forHTTPHeaderField: "Sec-Fetch-Dest") request.setValue("u=0, i", forHTTPHeaderField: "Priority") // make the request } Attempted Conversion func updateOrderStatusProxy(completion: @escaping (Bool) -&gt; Void) { let orderLink = "https://shop.ccs.com/51913883831/orders/f3ef2745f2b06c6b410e2aa8a6135847" guard let url = URL(string: orderLink) else { completion(true) return } let proxy = "resi.wealthproxies.com:8000:akzaidan:x0if46jo-country-US-session-7cz6bpzy-duration-60" let proxyDetails = proxy.split(separator: ":").map(String.init) guard proxyDetails.count == 4, let port = UInt16(proxyDetails[1]) else { print("Invalid proxy format") completion(false) return } let proxyEndpoint = NWEndpoint.hostPort(host: .init(proxyDetails[0]), port: NWEndpoint.Port(integerLiteral: port)) let proxyConfig = ProxyConfiguration(httpCONNECTProxy: proxyEndpoint, tlsOptions: nil) proxyConfig.applyCredential(username: proxyDetails[2], password: proxyDetails[3]) let parameters = NWParameters.tcp let privacyContext = NWParameters.PrivacyContext(description: "ProxyConfig") privacyContext.proxyConfigurations = [proxyConfig] parameters.setPrivacyContext(privacyContext) let host = url.host ?? "" let path = url.path.isEmpty ? "/" : url.path let query = url.query ?? "" let fullPath = query.isEmpty ? path : "\(path)?\(query)" let connection = NWConnection( to: .hostPort( host: .init(host), port: .init(integerLiteral: UInt16(url.port ?? 80)) ), using: parameters ) connection.stateUpdateHandler = { state in switch state { case .ready: print("Connected to proxy: \(proxyDetails[0])") let httpRequest = """ GET \(fullPath) HTTP/1.1\r Host: \(host)\r Connection: close\r Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8\r User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/18.0.1 Safari/605.1.15\r Accept-Language: en-US,en;q=0.9\r Accept-Encoding: gzip, deflate, br\r Sec-Fetch-Dest: document\r Sec-Fetch-Mode: navigate\r Sec-Fetch-Site: none\r Priority: u=0, i\r \r """ connection.send(content: httpRequest.data(using: .utf8), completion: .contentProcessed({ error in if let error = error { print("Failed to send request: \(error)") completion(false) return } // Read data until the connection is complete self.readAllData(connection: connection) { finalData, readError in if let readError = readError { print("Failed to receive response: \(readError)") completion(false) return } guard let data = finalData else { print("No data received or unable to read data.") completion(false) return } if let body = String(data: data, encoding: .utf8) { print("Received \(data.count) bytes") print("\n\nBody is \(body)") completion(true) } else { print("Unable to decode response body.") completion(false) } } })) case .failed(let error): print("Connection failed for proxy \(proxyDetails[0]): \(error)") completion(false) case .cancelled: print("Connection cancelled for proxy \(proxyDetails[0])") completion(false) case .waiting(let error): print("Connection waiting for proxy \(proxyDetails[0]): \(error)") completion(false) default: break } } connection.start(queue: .global()) } private func readAllData(connection: NWConnection, accumulatedData: Data = Data(), completion: @escaping (Data?, Error?) -&gt; Void) { connection.receive(minimumIncompleteLength: 1, maximumLength: 65536) { data, context, isComplete, error in if let error = error { completion(nil, error) return } // Append newly received data to what's been accumulated so far let newAccumulatedData = accumulatedData + (data ?? Data()) if isComplete { // If isComplete is true, the server closed the connection or ended the stream completion(newAccumulatedData, nil) } else { // Still more data to read, so keep calling receive self.readAllData(connection: connection, accumulatedData: newAccumulatedData, completion: completion) } } }

Hi, I have created an application for NFC tag scanning and read the tag data. For that, i enabled the capability: NearField Communication Tag reading. Then I added 2 tag formats in the entitlement then i added info.plist: NFCReaderUsageDescription We need to use NFC com.apple.developer.nfc.readersession.felica.systemcodes 8005 8008 0003 fe00 90b7 927a 12FC 86a7 com.apple.developer.nfc.readersession.iso7816.select-identifiers D2760000850100 D2760000850101 but even though when i run the app and tap the nfc card im getting some error: NFCTag didBecomeActive 2025-08-29 19:08:12.272278+0530 SAFRAN_NFC[894:113090] NFCTag didDetectTags 2025-08-29 19:08:12.282869+0530 SAFRAN_NFC[894:113520] [CoreNFC] -[NFCTagReaderSession _connectTag:error:]:730 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement} 2025-08-29 19:08:12.284044+0530 SAFRAN_NFC[894:113090] NFCTag restarting polling 2025-08-29 19:08:12.372116+0530 SAFRAN_NFC[894:113090] NFCTag didDetectTags 2025-08-29 19:08:12.381535+0530 SAFRAN_NFC[894:113378] [CoreNFC] -[NFCTagReaderSession _connectTag:error:]:730 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement} 2025-08-29 19:08:12.382246+0530 SAFRAN_NFC[894:113090] NFCTag restarting polling 2025-08-29 19:08:12.470667+0530 SAFRAN_NFC[894:113090] NFCTag didDetectTags 2025-08-29 19:08:12.479336+0530 SAFRAN_NFC[894:113378] [CoreNFC] -[NFCTagReaderSession _connectTag:error:]:730 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement} 2025-08-29 19:08:12.480101+0530 SAFRAN_NFC[894:113090] NFCTag restarting polling Could you please help me wha tis the issue and give solution for that?

Hello, I’ve run into some strange behavior with the macOS System Extension using a Packet Tunnel. The issue showed up after the device went to sleep while the VPN was running. When I woke the computer, the VPN tried to reconnect but never succeeded — it just stayed stuck in the “connecting” state. I was able to turn the VPN off, but every attempt to turn it back on failed and got stuck at “connecting” again. Even removing the VPN configuration from Settings didn’t help. The only thing that worked was disabling the system extension completely. While checking the logs, I noticed thousands of identical log messages appearing within just a few seconds: nesessionmanager(562) deny(1) system-fsctl (_IO "h" 47) 17:11:52.481498+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481568+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481580+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481587+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481646+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481664+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481671+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481676+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481682+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481687+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension After the burst of these repeated messages, I started seeing logs like the following: 17:11:52.481759+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.481790+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.481949+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.481966+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.481986+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.481992+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482003+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.482011+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482022+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.482028+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482039+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.482049+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482060+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Slack Helper[84828] com.apple.networkextension 17:11:52.482069+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Slack Helper[84828]: session in state connecting com.apple.networkextension 17:11:52.482079+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from sharingd[764] com.apple.networkextension 17:11:52.482086+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from sharingd[764]: session in state connecting com.apple.networkextension It is clear that the connection is in a loop of submitting request to start and then failing. This problem occured only after sleep on macOS 26.0 and 15.6. This issue only occured after the system woke up from sleep. macOS 15.6 and 26.0. Is this a known problem, and how should I go about troubleshooting or resolving it?