I am using SwiftData with CloudKit to synchronize data across multiple devices, and I have encountered an issue: occasionally, abnormal sync behavior occurs between two devices (it does not happen 100% of the time—only some users have reported this problem). It seems as if synchronization between the two devices completely stops; no matter what operations are performed on one end, the other end shows no response. After investigating, I suspect the issue might be caused by both devices simultaneously modifying the same field, which could lead to CloudKit's logic being unable to handle such conflicts and causing the sync to stall. Are there any methods to avoid or resolve this situation? Of course, I’m not entirely sure if this is the root cause. Has anyone encountered a similar issue?

Hey everyone, I have a question. When creating an app, how should I design a message table that involves personal privacy? The content is stored locally on the user's device, and then encrypted in the server database? How should I design it?

Hi, I was testing the new iOS 18 behavior where NSPersistentCloudKitContainer wipes the local Core Data store if the user logs out of iCloud, for privacy purposes. I ran the tests both with a Core Data + CloudKit app, and a simple one using SwiftData with CloudKit enabled. Results were identical in either case. In my testing, most of the time, the feature worked as expected. When I disabled iCloud for my app, the data was wiped (consistent with say the Notes app, except if you disable iCloud it warns you that it'll remove those notes). When I re-enabled iCloud, the data appeared. (all done through the Settings app) However, in scenarios when NSPersistentCloudKitContainer cannot immediately sync -- say due to rate throttling -- and one disables iCloud in Settings, this wipes the local data store and ultimately results in data loss. This occurs even if the changes to the managed objects are saved (to the local store) -- it's simply they aren't synced in time. It can be a little hard to reproduce the issue, especially since when you exit to the home screen from the app, it generally triggers a sync. To avoid this, I swiped up to the screen where you can choose which apps to close, and immediately closed mine. Then, you can disable iCloud, and run the app again (with a debugger is helpful). I once saw a message with something along the lines of export failed (for my record that wasn't synced), and unfortunately it was deleted (and never synced). Perhaps before NSPersistentCloudKitContainer wipes the local store it ought to force sync with the cloud first?

I have a single multiplatform application that I use NSPersistentCloudKitContainer on. This works great, except I noticed when I open two instances of the same process (not windows) on the same computer, which share the same store, data duplication and "Metadata Inconsistency" errors start appearing. This answer (https://stackoverflow.com/a/67243833) says this is not supported with NSPersistentCloudKitContainer. Is this indeed true? If it isn't allowed, is the only solution to disable multiple instances of the process via a lock file? I was thinking one could somehow coordinate a single "leader" process that syncs to the cloud, with the others using NSPersistentContainer, but this would be complicated when the "leader" process terminates. Currently, it seems iPad split views are new windows, not processes -- but overall I'm still curious :0 Thank you!

it seems that is going to the appstore to find the app to execute the share but my app is not in the appstore yet. I am using a sandboxed user and a non sandboxed user, I have tried real phones connected to xcode and simulator same effect, looking for how to test my ckshare in testflight thanks

Hello, In my iOS/SwiftUI/SwiftData app, I want the user to be able to hit [Cancel] from editing in a detail screen and return to the previous screen without changes being saved. I believed that setting autosaveEnabled to false and/or calling .rollback would prevent changes from being saved, unless/until I call .save() when the user clicks [Save], but this does not seem to be correct. I set modelContext.autosaveEnabled = false and I call modelContext.rollback() when the user hits [Cancel], but any changes they made are not rolled back, but saved even if I don’t call save(). I have tried setting autosaveEnabled to false when I create the ModelContainer on a @MainActor function when the App starts, and in the detail/edit screen’s .onAppear(). I can see that .rollback is being called when the [Cancel] button is tapped. In all cases, any changes the user made before hitting [Cancel] are saved. The Developer Documentation on autosaveEnabled includes this: “The default value is false. SwiftData automatically sets this property to true for the model container’s mainContext." I am working on the mainContext, but it appears that setting autosaveEnabled to false has no effect no matter where in the code I set it. If someone sees what I am doing wrong, I’d sure appreciate the input. If this description doesn’t explain the problem well enough, I’ll develop a minimal focused example.

I'm building a photo editing app with a token-based subscription system using RevenueCat and StoreKit. Users purchase subscriptions that grant tokens for AI generations. There are no user accounts, the app is fully anonymous. Currently, I generate an anonymous account ID via RevenueCat SDK and store it in iCloud Keychain. This allows users on the same iCloud account to restore both their subscription and token balance across devices. However, users on a different iCloud account can restore their subscription via Apple, but their token balance is lost because there's no way to link the anonymous IDs. The problem is that if a user switches iCloud accounts or gets a new device without the same iCloud, their purchased tokens are orphaned. The subscription restores fine through Apple, but the token balance tied to the old anonymous ID becomes inaccessible. I have a few constraints: no user accounts, no email or phone sign-in, must work across devices owned by the same person, and must comply with App Store guidelines. My questions are: Is iCloud Keychain the right tool for this, or is there a better approach? Would CloudKit with an anonymous record zone be more appropriate? Are there any recommended patterns for persisting consumable balances tied to anonymous users across device migrations? Any guidance would be appreciated.

CloudKit CKRecordZone Deletion Issue Problem: CloudKit record zones deleted via CKDatabase.modifyRecordZones(deleting:) or CKModifyRecordZonesOperation are successfully removed but then reappear. I suspect they are automatically reinstated by CloudKit sync, despite successful deletion confirmation. Environment: SwiftData with CloudKit integration Custom CloudKit zones created for legacy zone-based sharing Observed Behavior: Create custom zone (e.g., "TestZone1") via CKDatabase.modifyRecordZones(saving:) Copy records to zone for sharing purposes Delete zone using any CloudKit deletion API - returns success, no errors Immediate verification: Zone is gone from database.allRecordZones() After SwiftData/CloudKit sync or app restart: Zone reappears Reproduction: Tested with three different deletion methods - all exhibit same behaviour: modifyRecordZones(deleting:) async API CKModifyRecordZonesOperation (fire-and-forget) CKModifyRecordZonesOperation with result callbacks Zone deletion succeeds, change tokens (used to track updates to shared records) cleaned up But zones are restored presumably by CloudKit background sync Expected: Deleted zones should remain deleted Actual: Zones are reinstated, creating orphaned zones

Trying to support undo & redo in an app that utilizes Swift Data and as with anything other than provided simplistic Apple demo examples the experience is not great. The problem: Im trying to build functionality that allows users to add items to an item group, where item and item group have a many-to-many relationship e.g. item group can hold many items and items can appear in multiple groups. When trying to do so with relatively simple setup of either adding or removing item group from items relationship array, I am pretty consistently met with a hard crash after performing undo & redo. Sometimes it works the first few undo & redos but 95% of the time would crash on the first one. Could not cast value of type 'Swift.Optional<Any>' (0x20a676be0) to 'Swift.Array<App.CodableStructModel>' (0x207a2bc08). Where CodableStructModel is a Codable Value type inside Item. Adding and removing this relationship should be undoable & redoable as typical for Mac interaction and is "supported" by SwiftData by default, meaning that the developer has to actively either wholly opt out of undo support in their modelContainer setup or do it on a per action scale with the only thing I know of: modelContext.processPendingChanges() modelContext.undoManager?.disableUndoRegistration() ..... modelContext.processPendingChanges() modelContext.undoManager?.enableUndoRegistration() General rant on SwiftData: Random crashes, inconsistencies, random cryptic errors thrown by the debugger and general lack of production level stability. Each update breaks something new and there is very little guidance and communication from the Swift Data team on how to adapt and more importantly consideration for developers that have adopted Swift Data. If SwiftData is not ready for production, it would go a long way to clearly communicate that and mark it as Beta product.

Greetings my fellow engineers, I use SwiftData in my iOS app. The schema is unversioned and consists of a single model. I've been modifying the model for almost two years now and relying on automatic database migrations. I had no problems for all that time, but now trying to add a property to the model or even remove a property from the model results in an error which seems like SwiftData is no longer capable of performing an automatic migration. The log console has things like the following: CoreData: error: NSUnderlyingError : Error Domain=NSCocoaErrorDomain Code=134190 "(null)" UserInfo={reason=Each property must have a unique renaming identifier} CoreData: error: reason : Can't find or automatically infer mapping model for migration CoreData: error: storeType: SQLite CoreData: error: configuration: default CoreData: annotation: options: CoreData: annotation: NSMigratePersistentStoresAutomaticallyOption : 1 CoreData: annotation: NSInferMappingModelAutomaticallyOption : 1 CoreData: annotation: NSPersistentStoreRemoteChangeNotificationOptionKey : 1 CoreData: annotation: NSPersistentHistoryTrackingKey : 1 CoreData: error: <NSPersistentStoreCoordinator: 0x7547b5480>: Attempting recovery from error encountered during addPersistentStore: 0x753f8d800 Error Domain=NSCocoaErrorDomain Code=134140 "Persistent store migration failed, missing mapping model." Have you ever encountered such an issue? What are my options?

Running Tahoe 26.1 in a virtual machine, I can't sign into my Apple account. There is an error message saying "Could not communicate with the server." Internet access otherwise seems to be working in the VM. I tried both UTM and VirtualBuddy. Is this supposed to work?

Hi, I am implementing a premium feature in my app where CloudKit syncing is available only for "Pro" users. The Workflow: Free Users: I initialize the ModelContainer with cloudKitDatabase: .none so their data stays local. Pro Upgrade: When a user purchases a subscription, I restart the container with cloudKitDatabase: .automatic to enable syncing. The Problem: If a user starts as "Free" (creates local data) and later upgrades to "Pro", the app crashes immediately upon launch with the following error: Fatal error: Failed to create ModelContainer: SwiftDataError(_error: SwiftData.SwiftDataError._Error.loadIssueModelContainer, _explanation: nil) It seems that SwiftData fails to load the existing data once the configuration changes to expect a CloudKit-backed store. My Question: Is there a supported way to "toggle" CloudKit on for an existing local dataset without causing this crash? I want the user's existing local data to start syncing once they pay, but currently, it just crashes. My code: import Foundation import SwiftData public enum DataModelEnum: String { case task, calendar public static let container: ModelContainer = { let isSyncEnabled = UserDefaults.isProUser let config = ModelConfiguration( groupContainer: .identifier("group.com.yourcompany.myApp"), cloudKitDatabase: isSyncEnabled ? .automatic : .none ) do { return try ModelContainer(for: TaskModel.self, CalendarModel.self, configurations: config) } catch { fatalError("Failed to create ModelContainer: \(error)") } }() }

Hi everyone, I am experiencing an iCloud provisioning problem I cannot resolve, and Developer Support has not been able to help. My App ID: com.exaqservices.ArkyvTiles Symptoms: 1. In Xcode (v16.2), enabling iCloud in Signing & Capabilities repeatedly fails with: The app ID does not include the iCloud container. Click Try Again. Clicking Try Again does nothing. The error persists forever. 2. In Certificates, Identifiers & Profiles: • The iCloud capability is enabled for this App ID. • The CloudKit container is selected. • But the portal no longer shows the “iCloud Documents” checkbox, which used to be required for ubiquitous document support. 3. Xcode cannot regenerate provisioning profiles because it claims the App ID is missing the iCloud container — even though the container is attached. 4. Provisioning profiles on the Apple Developer site all appear expired, and new ones do not generate correctly. 5. The App Store Connect interface also does not show an iCloud Services section under App Information → Capabilities as older guides describe. Expected Behavior: Since iCloud and the CloudKit container are enabled on the App ID, Xcode should successfully enable: • com.apple.developer.icloud-services • com.apple.developer.icloud-container-identifiers • com.apple.developer.ubiquity-container-identifiers (if needed) • com.apple.developer.ubiquity-kvstore-identifier Instead, the entitlements never propagate. What I suspect: This seems like an App ID metadata mismatch or a stale backend entry where: • the CloudKit container is attached but the entitlement isn’t linked, • the “iCloud Documents” flag is missing due to a UI transition, • provisioning profiles cannot be regenerated because the App ID is not updating correctly. What I need help with: Can someone from Apple engineering confirm: • Whether my App ID metadata is corrupted, • If entitlements need to be manually refreshed, • Or if the “iCloud Documents” toggle has moved or is no longer exposed? This is blocking development completely — I cannot build, sign, or deploy the app with iCloud. Thank you! Alan Metzger

Is there a way to view the data saved when using swiftdata? Even after deleting all models, the storage space taken up by the app in Settings is too large.

We are currently implementing a custom iCloud sync for our macOS and iOS apps using CloudKit. Syncing works fine as long as the number of record sends is relatively small. But when we test with a large number of changes ( 80,000+ CKRecords ) we start running into problems. Our sending strategy is very conservative to avoid rate limits: We send records sequentially in batches of 250 records With about 2 seconds pause between operations Records are small and contain no assets (assets are uploaded separately) At some point we start receiving: “Database commit size exceeds limit” After that, CloudKit begins returning rate-limit errors with retryAfter-Information in the error. We wait for the retry time and try again, but from this moment on, nothing progresses anymore. Every subsequent attempt fails. We could not find anything in the official documentation regarding such a “commit size” limit or what triggers this failure state. So my questions are: Are there undocumented limits on the total number of records that can exist in an iCloud database (private or shared)? Is there a maximum volume of record modifications a container can accept within a certain timeframe, even if operations are split into small batches with pauses? Is it possible that sending large numbers of records in a row can temporarily or permanently “stall” a CloudKit container? Any insights or experiences would be greatly appreciated. Thank you!

While experimenting with CloudKit dashboard, I accidentally turned off a iCloud container. Now in the Certificates, Identifiers & Profiles section of developer portal, this iCloud container identifier is listed under "hidden" not "active" I can edit its name but there is not way to unhide or active it again. What am I missing?

I have been working on an app for the past few months, and one issue that I have encountered a few times is an error where quick subsequent deletions cause issues with detached tasks that are triggered from some user actions. Inside a Task.detached, I am building an isolated model context, querying for LineItems, then iterating over those items. The crash happens when accessing a Transaction property through a relationship. var byTransactionId: [UUID: [LineItem]] { return Dictionary(grouping: self) { item in item.transaction?.id ?? UUID() } } In this case, the transaction has been deleted, but the relationship existed when the fetch occurred, so the transaction value is non-nil. The crash occurs when accessing the id. This is the error. SwiftData/BackingData.swift:1035: Fatal error: This model instance was invalidated because its backing data could no longer be found the store. PersistentIdentifier(id: SwiftData.PersistentIdentifier.ID(backing: SwiftData.PersistentIdentifier.PersistentIdentifierBacking.managedObjectID(0xb43fea2c4bc3b3f5 &lt;x-coredata://A9EFB8E3-CB47-48B2-A7C4-6EEA25D27E2E/Transaction/p1756&gt;))) I see other posts about this error and am exploring some suggestions, but if anyone has any thoughts, they would be appreciated.

I'm experiencing the following error with my SwiftData container when running a build: Code=134504 "Cannot use staged migration with an unknown model version." Code Structure - Summary I am using a versionedSchema to store multiple models in SwiftData. I started experiencing this issue when adding two new models in the newest Schema version. Starting from the current public version, V4.4.6, there are two migrations. Migration Summary The first migration is to V4.4.7. This is a lightweight migration removing one attribute from one of the models. This was tested and worked successfully. The second migration is to V5.0.0. This is a custom migration adding two new models, and instantiating instances of the two new models based on data from instances of the existing models. In the initial testing of this version, no issues were observed. Issue and Steps to Reproduce Reproduction of issue: Starting from a fresh build of the publicly released V4.4.6, I run a new build that contains both Schema Versions (V4.4.7 and V5.0.0), and their associated migration stages. This builds successfully, and the container successfully migrates to V5.0.0. Checking the default.store file, all values appear to migrate and instantiate correctly. The second step in reproduction of the issue is to simply stop running the build, and then rebuild, without any code changes. This fails to initialize the model container every time afterwards. Going back to the simulator after successive builds are stopped in Xcode, the app launches and accesses/modifies the model container as normal. Supplementary Issue: I have been putting up with the same, persistent issue in the Xcode Preview Canvas of "Failed to Initialize Model Container" This is a 5 in 6 build issue, where builds will work at random. In the case of previews, I have cleared all data associated with all previews multiple times. The only difference being that the simulator is a 100% failure rate after the initial, successful initialization. I assume this is due to the different build structure of previews. Lastly, of note, the Xcode previews fail at the same line in instantiating the model container as the simulator does. From my research into this issue, people say that the Xcode preview is instantiating from elsewhere. I do have a separate model container set up specifically for canvas previews, but the error does not occur in that container, but rather the app's main container. Possible Contributing Factors & Tested Facts iOS: While I have experienced issues with SwiftData and the complier in iOS 26, I can rule that out as the issue here. This has been tested on simulators running iOS 18.6, 26.0.1, and 26.1, all encountering failures to initialize model container. While in iOS 18, subsequent builds after the successful migration did work, I did eventually encounter the same error and crash. In iOS 26.0.1 and 26.1, these errors come immediately on the second build. Container Initialization for V4.4.6 do { container = try ModelContainer( for: Job.self, JobTask.self, Day.self, Charge.self, Material.self, Person.self, TaskCategory.self, Service.self, migrationPlan: JobifyMigrationPlan.self ) } catch { fatalError("Failed to Initialize Model Container") } Versioned Schema Instance for V4.4.6 (V4.4.7 differs only by versionIdentifier) static var versionIdentifier = Schema.Version(4, 4, 6) static var models: [any PersistentModel.Type] { [Job.self, JobTask.self, Day.self, Charge.self, Material.self, Person.self, TaskCategory.self, Service.self] } Container Initialization for V5.0.0 do { let schema = Schema([Jobify.self, JobTask.self, Day.self, Charge.self, MaterialItem.self, Person.self, TaskCategory.self, Service.self, ServiceJob.self, RecurerRule.self]) container = try ModelContainer( for: schema, migrationPlan: JobifyMigrationPlan.self ) } catch { fatalError("Failed to Initialize Model Container") } Versioned Schema Instance for V5.0.0 static var versionIdentifier = Schema.Version(5, 0, 0) static var models: [any PersistentModel.Type] { [ JobifySchemaV500.Job.self, JobifySchemaV500.JobTask.self, JobifySchemaV500.Day.self, JobifySchemaV500.Charge.self, JobifySchemaV500.Material.self, JobifySchemaV500.Person.self, JobifySchemaV500.TaskCategory.self, JobifySchemaV500.Service.self, JobifySchemaV500.ServiceJob.self, JobifySchemaV500.RecurerRule.self ] } Addressing Differences in Object Names Type-aliasing: All my model types are type-aliased for simplification in view components. All types are aliased as 'JobifySchemeV446.<#Name#>' in V.4.4.6, and 'JobifySchemaV500.<#Name#>' in V5.0.0 Issues with iOS 26: My type-aliases dating back to iOS 17 overlapped with lower level objects in Swift, including 'Job' and 'Material'. These started to be an issue with initializing the model container when running in iOS 26. The type aliases have been renamed since, however the V4.4.6 build with the old names runs and builds perfectly fine in iOS 26 If there is any other code that may be relevant in determining where this error is occurring, I would be happy to add it. My current best theory is simply that I have mistakenly omitted code relevant to the SwiftData Migration.

We have an unreleased SwiftData app for iOS18+. While we were testing I saw reports on the forum about unexpected database migrations for codable arrays on iOS26.1. I'd like to ask a couple of questions: 1- Does this issue originate from the new Xcode version, or is it specific to iOS 26.1? 2- Is it possible to change our attribute so that users on older iOS versions receive the same model, preventing a migration from being triggered when they upgrade to iOS 26.1? One of our models looks like this: struct Point: Codable, Hashable { let x: Int let y: Int } @Model class Grid { private(set) var gridId: String = "" var points: [Point] = [] var updatedAt: Date = Date() private(set) var createdAt: Date = Date() #Index<Grid>([\.gridId]) ... } I can think of some options like: // 1 @Attribute(.transformable(by: CustomJsonTransformer.self)) var points: [Point] = [] // 2 @Attribute(.externalStorage) var points: [Point] = [] // 3 var points: Data = Data() // store points as data However, I'm not sure which one to use. What would you recommend to handle this, or is there a better strategy you would suggest?

After Xcode 26.1 was updated and installing the OS 26.1 simulators, my app started crashing related to transformable properties. When I checked my schema, I noticed that properties with array collection types are suddenly set with an option transformable with Optional("NSSecureUnarchiveFromData")], even though I do not use any transformable types. I verified the macros, no transformable was specified. This is causing ModelCoders to encode/decode my properties incorrectly. This is not an issue when I switch back to OS 26.0 simulators.