Hi, I have a workout app in the App Store which mirrors workout data between the phone and watch. Since iOS 26.x I've been having issues and received reports of the mirroring no longer working. Users in iOS 18 have no problems with this functionality. Bug description: A workout session is started from the phone app and starts mirroring to the watch companion device. The watch starts the workout session and then the mirroring session is disconnected / lost. Sending data to the companion device fails and ending the session on the phone doesn't end the session on the watch...essentially they become completely disconnected. Please note I am testing this on physical devices...not simulators. As a sanity check I've also tried the "Building a multidevice workout app" sample code and it has the same problem. To re-create on the sample app, I start a workout from the phone, the watch workout starts and then the mirroring session seems to disconnect and is unable to send data. This is the log from the "Building a multidevice workout app" sample code. Successfully started workout Type: Notice | Timestamp: 2025-10-17 06:57:07.341401+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2ca7 -[SPRemoteInterface _appRecoverAnyExtendedRuntimeSession:]_block_invoke:4350: Got no sessions back from -[CSLSSessionService existingRunningSessions:] or -[CSLSSessionService existingScheduledSessions:] after receiving a PUICInitializeSessionServiceAction Type: Error | Timestamp: 2025-10-17 06:57:07.641571+02:00 | Process: MirroringWorkoutsSample Watch App | Library: WatchKit | Subsystem: com.apple.watchkit | Category: default | TID: 0x1b2ca7 Session state changed from 1 to 2 Type: Notice | Timestamp: 2025-10-17 06:57:07.647883+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2e87 Failed to send data: Error Domain=com.apple.healthkit Code=100 "Failed to send data to remote session." UserInfo={NSLocalizedDescription=Failed to send data to remote session.} Type: Notice | Timestamp: 2025-10-17 06:57:07.669922+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2ca7 Would appreciate any help with this problem as it's affecting customers. Thank you

I'm developing a watchOS nap app that detects when the user falls asleep by monitoring heart rate changes. == Technical Implementation == HKWorkoutSession (.mindAndBody) for background execution HKAnchoredObjectQuery for real-time heart rate data CoreMotion for movement detection == Battery Considerations == Heart rate monitoring ONLY active when user explicitly starts a session Monitoring continues until user is awakened OR 60-minute limit is reached If no sleep detected within 60 minutes, session auto-ends (user may have abandoned or forgotten to stop) App displays clear UI indicating monitoring is active Typical session: 15-30 minutes, keeping battery usage minimal == The Problem == HKWorkoutSession affects Activity Rings during the session. Users receive "Exercise goal reached" notifications while resting — confusing. == What I've Tried == Not using HKLiveWorkoutBuilder → Activity Rings still affected Using builder but not calling finishWorkout() (per https://developer.apple.com/forums/thread/780220) → Activity Rings still affected WKExtendedRuntimeSession (self-care type) (per https://developer.apple.com/forums/thread/721077) → Only ~10 min runtime, need up to 60 min HKObserverQuery + enableBackgroundDelivery (per https://developer.apple.com/forums/thread/779101) → ~4 updates/hour, too slow for real-time detection Audio background session for continuous processing (suggested in https://developer.apple.com/forums/thread/130287) → Concerned about App Store rejection for non-audio app; if official approves this technical route, I can implement in this direction Some online resources mention "Health Monitoring Entitlement" from WWDC 2019 Session 251, but I could not find any official documentation for this entitlement. Apple Developer Support also confirmed they cannot locate it? == My Question == Is there any supported way to: Monitor heart rate in background for up to 60 minutes WITHOUT affecting Activity Rings or creating workout records? If this requires a special entitlement or API access, please advise on the application process. Or allow me to submit a code-level support request. Any guidance would be greatly appreciated. Thank you!

After upgrading to a new iPhone and restoring from an iCloud backup using the same Apple ID, I noticed an issue with Health app permissions. ■ What is happening On my previous iPhone, an app had permission to read step count data. After restoring to the new iPhone, the app still appears in the Health app under Sources. However, when I tap the app, the usual data type permission toggles (such as Steps) are not displayed at all. As a result, the app is unable to read step count data. ■ Additional details The app itself seems to be recognized as a Health data source. However, the data type permission screen is empty. No ON/OFF switches are shown. The backup was created on iOS 18, and the restore was performed on iOS 26. I have not yet confirmed whether this also happens with other iOS version combinations. ■ Questions Is it expected behavior that Health app permissions (per data type) are not restored via iCloud backup? Has anyone experienced a similar situation where the app appears under Sources but the permission options are missing? If so, how did you resolve it? Any information from users who have experienced the same issue would be greatly appreciated.

In the WWDC 2019 session "Extended Runtime for WatchOS apps" the video talks about an entitlement being required to use the HR sensor judiciously in the background. It provides a link to request the entitlement which no longer works: http://developer.apple.com/contect/request/health-monitoring The session video is also quite hard to find these days. Does anyone know why this is the case? Is the API and entitlement still available? Is there a supported way to run, even periodically, in the background on the Watch app (ignoring the background observer route which is known to be unreliable) and access existing HR sensor data

Hello, I’m building a health-related app for both watchOS and iOS, which needs to monitor certain health data (e.g., heart rate, active energy). Before updating to watchOS 26, the queries worked reliably without any issues. However, after adapting to watchOS 26, some users have reported that health data updates stop being delivered. What I’ve observed: HKObserverQuery with enableBackgroundDelivery is set up normally. On WatchOS 26, the query sometimes stops delivering updates entirely after a certain point, and once an update is missed, it may stop delivering further updates completely. Restarting the Apple Watch temporarily restores delivery, but the problem reoccurs after some time. This makes background health data monitoring unreliable for my app. Here’s a simplified version of the code we are using: guard let heartType = HKObjectType.quantityType(forIdentifier: .heartRate) else { return } let query = HKObserverQuery(sampleType: heartType, predicate: nil) { query, completionHandler, error in if let error = error { logEvent("Observer error: \(error.localizedDescription)") return } logEvent("Heart rate changed") MyNotificationManager.shared.sendNotification() // Send a local notification completionHandler() } healthStore.execute(query) healthStore.enableBackgroundDelivery(for: heartType, frequency: .hourly) { success, error in if success { logEvent("Background heart rate delivery enabled") } else { logEvent("Failed to enable background heart rate delivery: \(error?.localizedDescription ?? "Unknown error")") } } Could you please clarify: Is this a known issue with HKObserverQuery and enableBackgroundDelivery on watchOS 26? Are there any recommended workarounds or best practices to ensure continuous background delivery of health data? Thank you in advance for your help.

WorkoutKit WorkoutScheduler seems broken with the first beta of iOS 18.2. I have tested using my app from Xcode and the one that is on the App Store (and working properly on other devices), and it's not working with this new beta of iOS. They appears in WorkoutScheduler.shared.scheduledWorkouts, but not on the watch. I even tried with other apps that do the same with Manual add to Apple Watch with SwiftUI workoutPreview work. Xcode 16.0 iOS 18.2 Beta 1 WatchOS 11.1