Hardware

RSS for tag

Delve into the physical components of Apple devices, including processors, memory, storage, and their interaction with the software.

Posts under Hardware subtopic

Post

Replies

Boosts

Views

Activity

Matter Operating Device issue
My team has developed an app with a biref Matter commissioner feature using the Matter framework on the MatterSupport extension. Our app support iOS and Android. However, we ran into a problem that the control certificate generated by the iOS app could not control the device on the Android side. And the control certificate generated by the Android app could not control the device on the iOS side. The Matter library used by Android is compiled by connectedhomeip. Does anyone have the same problem as us? How to solve this? Thank you
3
0
278
Feb ’26
readValueWithCompletionHandler: limitations?
Are there some undocumented (or, well, documented, but overlooked by me) prerequisites to the readValueWithCompletionHandler: method? The reason I ask is that occasionally I am getting the Read/Write operation failed error in the callback, even in cases where direct, non-deferred reading of the value worked properly. It seems to happen very consistently with some accessories and characteristics, not randomly; thus, it is not likely a temporary quirk in the communication with the device. Probably I am overlooking something of importance, but it does not make a good sense to me. My code (is it right, or can you see anything wrong in there?) // in an HMCharacteristic category if ([self.properties containsObject:HMCharacteristicPropertyReadable]) { id val=self.value, ident=[NSString stringWithFormat:@" [%@] %@ (%@)", self.uniqueIdentifier, self.localizedDescription, self.service.accessory.name]; NSLog(@"nondeferred '%@'%@", val, ident); if (self.service.accessory.reachable) { [self readValueWithCompletionHandler:^(NSError * _Nullable error) { if (error) NSLog(@"deferred ERROR %@ -> %@", ident, error); else NSLog(@"deferred '%@'%@", self.value, ident); }]; } } for most accessories/characteristics works properly, but for some of them I am consistently getting results like nondeferred '70.5' [64998F70-9C11-502F-B8B4-E99DC5C3171B] Current Relative Humidity (Vlhkoměr TH) deferred '70.5' ERROR [64998F70-9C11-502F-B8B4-E99DC5C3171B] Current Relative Humidity (Vlhkoměr TH) -> Error Domain=HMErrorDomain Code=74 "Read/Write operation failed." UserInfo={NSLocalizedDescription=Read/Write operation failed.} Do I do something wrong in my code, or is that normal with some devices? If the latter, is there perhaps a way to know beforehand that I should not use readValueWithCompletionHandler: (for it is bound to fail anyway), and instead I should simply use self.value non-deferred? For some time it seemed to me it happens with bridged accessories, but not really, this hypothesis proved wrong by further testing. Thanks!
3
0
240
Feb ’26
BLE advertising/scanning communication broken on iPhone 17 — CBPeripheralManager + CBCentralManager workflow
Environment: iPhone 17 / iPhone 17 Pro (Apple N1 chip) iOS 26.x Xcode 26 Framework: Flutter app with native iOS BLE library (CoreBluetooth) We have a production IoT app that communicates with BLE nodes (Nordic, PIC, EnOcean peripherals) using an advertising/scanning-based protocol — not GATT connections. The app broadcasts commands via CBPeripheralManager (advertising service UUIDs) and receives responses by scanning with CBCentralManager (reading manufacturer data and service UUIDs from advertisement packets). This workflow has been reliable across all iPhone models from iPhone 8 through iPhone 16 Pro Max. On iPhone 17 devices, we are experiencing multiple failures in this workflow. Architecture: Sending commands: We use CBPeripheralManager.startAdvertising() with CBAdvertisementDataServiceUUIDsKey to broadcast a UUID-encoded command to nearby nodes. Receiving responses: We use CBCentralManager.scanForPeripherals(withServices: nil, options: [CBCentralManagerScanOptionAllowDuplicatesKey: true]) and filter responses in centralManager(_:didDiscover:advertisementData:rssi:) by matching CBAdvertisementDataServiceUUIDsKey or CBAdvertisementDataManufacturerDataKey against expected UUID masks. Communication pattern: Advertise a command → stop advertiser → start scanner → wait for matching response → process result. Typical timeout is 1.5 seconds per exchange. Issues observed on iPhone 17: peripheralManagerDidStartAdvertising behaviour change After calling CBPeripheralManager.startAdvertising(:), the delegate callback peripheralManagerDidStartAdvertising(:error:) either fires with errors that did not occur on previous hardware, or advertising does not appear to reach the peripheral nodes at all. The same advertising payload works immediately when tested on iPhone 15/16. Is the N1 chip's Bluetooth 6 stack handling CBAdvertisementDataServiceUUIDsKey advertising differently? Are there new constraints on advertising payload size or format? Scanner returning fewer/no results with withServices: nil Our scanner uses scanForPeripherals(withServices: nil) because we need to read manufacturer data from advertisement packets and filter using a custom UUID mask. On iPhone 17, we observe significantly fewer didDiscover callbacks compared to iPhone 15/16 in the same physical environment, with the same nodes advertising. We understand that passing service UUIDs in withServices: is recommended, but our protocol requires reading raw manufacturer data bytes that aren't associated with a single service UUID — we use mask-based matching (e.g., filter mask 11110000-0000-0000-0000-000000000000 against scan results). Has the N1 chip changed the rate or filtering behaviour of unfiltered BLE scans? Is there a new throttling mechanism? Background scanning stops immediately When the app moves to background, scanning appears to stop entirely on iPhone 17 — even with bluetooth-central in UIBackgroundModes. On iPhone 16, background scanning continued (at reduced intervals) and delivered results for peripherals advertising filtered service UUIDs. Aggressive session termination on app backgrounding Our advertise-then-scan sequences (typically 1.5s round-trip) are being interrupted when the user briefly switches apps. The CBPeripheralManager stops advertising and the CBCentralManager stops scanning, causing timeout errors. This was not observed on previous iPhone models with the same iOS background mode configuration. Questions for Apple: Are there documented changes to CoreBluetooth behaviour on the N1 Bluetooth 6 chip that affect advertising-based (non-GATT) communication patterns? Has the scan response rate for scanForPeripherals(withServices: nil) been intentionally reduced on iPhone 17? Is CBCentralManagerOptionRestoreIdentifierKey now required for reliable background scanning on iPhone 17, or is this a known regression? Are there new advertising payload constraints (size, format, interval) that we should be aware of for the N1 chip? What we've tried: Added NSBluetoothAlwaysUsageDescription and NSBluetoothWhileInUseUsageDescription to Info.plist Confirmed Bluetooth permissions are granted Tested with identical BLE nodes that work on iPhone 15/16 Verified CBManagerState.poweredOn before all operations Any guidance or known workarounds would be greatly appreciated. Happy to provide sysdiagnose logs or a minimal reproducible sample project.
3
0
379
Feb ’26
Losing advertising packets when CBCentralManager scanForPeripheralsWithServices is left on
Right now, I am scanning for specific BLE peripherals with my iPad app, using this: [self.cbCentralManager scanForPeripheralsWithServices:serviceUUIDsToScanFor options:@{CBCentralManagerScanOptionAllowDuplicatesKey:@YES}]; I have the "CBCentralManagerScanOptionAllowDuplicatesKey" set true because I need to be able to detect when a peripheral is no longer advertising, so I capture each "didDiscoverPeripheral" callback and set a 3-second timer that notifies the user that that peripheral is no longer in range if another didDiscoverPeripheral hasn't been received in that time. The peripherals all advertise at 100ms intervals. What's weird is that if I leave the scan on for a long time, the advertising packets slow down, and eventually one of those timers times out, around about one or two minutes for the first instance, and then every 10-20 seconds after that. I've checked with ATS for all the BLE traffic, and there are indeed > 3-second gaps in the advertising packets that the iPad sees, so it's not my code introducing the gap. Is there some reason long-running scans should not be done on iPadOS (both 18 and 26.1 used)? I've tested out switching my scan to "stopScan" and restart it every 10 seconds, and that seems to have resolved the issue, but it's unclear why that would matter (and that does not seem like an appropriate use of the stop and start scans). Thanks!
3
0
158
Feb ’26
Bluetooth Connectivity Issues
Since 17.4 Dev Beta 2, I have been having Bluetooth issues. I had hoped it would have cleared up but even in 17.4.1 it continues. Airpod and Echo Auto are the only 2 audio devices I have. The audio will become chopping, rubber band or sound robotic and sometime completely disconnect. While driving it will occur on both audio devices. Sometimes I'm stopped at red light and the issue occurs. The phone is less than 3 feet from the device at all times. I have read forums and removed and readded the devices but that did not help. I really do not want to have to reset my phone since my 2FA apps do not recover in a restore. Anyone have any suggestions?
4
0
1.5k
Jun ’25
iOS 26 Beta 3 — iPhone 13 stuck at 1% battery, 0% battery health, reboots every few minutes
Hello Apple team and community, I’m reporting a critical issue affecting iPhone 13 (128 GB) on iOS 26 Public Beta 3. Problem Summary: • Device stays stuck at 1% battery, even while charging • Battery Health shows 0% in Settings • Phone reboots every 5 minutes while unplugged • Only works when connected to power • Cannot update, charge properly, or maintain uptime Additional Context: • The issue appeared immediately after installing iOS 26 beta 3 • Affected devices often have a replaced battery (even official or high-quality replacements) • Seems to be a software validation bug related to battery firmware • Reported by many users across Reddit, Apple Forums, and Twitter — but not listed in Known Issues What Has Been Tried: • Recovery Mode / Safe charging / Clean install (same version) – no effect • Third-party repair tools (ReiBoot, 3uTools) — partial workaround • Jailbreak with Nugget or iCleaner to disable crash daemons – temporarily helps • Apple Support suggested full device replacement (!) ⸻ Request: Please investigate and acknowledge this issue. This bug renders devices unusable for users with legitimate battery replacements — we need a fix in an upcoming beta.
4
1
1.5k
Aug ’25
Wallet no longer appear near iBeacon
Hello, We are testing Wallet passes with iBeacons in iOS 26 Beta. In earlier iOS releases, when a device was in proximity to a registered beacon, the corresponding pass would surface automatically. In iOS 26 Beta, this behavior no longer occurs, even if the pass is already present in Wallet. I have not found documentation of this change in the iOS 26 release notes. Could you please confirm whether this is expected in iOS 26, or if it may be a Beta-specific issue? Any pointers to updated documentation would be appreciated. Thank you.
4
2
317
1w
[Matter] Device cannot be commissioned to Google Home through iOS
Hi, We are facing the issue of commissioning our Matter device to google home through iOS device will be 100% failed. Here is our test summary regarding the issue: TestCase1 [OK]: Commissioning our Matter 1.4.0 device to Google Nest Hub 2 by Android device (see log DoorWindow_2.0.1_Google_Success.txt ) TestCase2 [NG]: Commissioning Matter 1.4.0 device to Google Nest Hub 2 by iPhone13 or iPhone16 (see log DoorWindow_2.0.1_Google_by_iOS_NG.txt ) TestCase3 [OK]: Commissioning our Matter 1.3.0 device to Google Nest Hub 2 by iPhone13 In TestCase2, we noticed that device was first commissioned to iOS(Apple keychain) then iOS opened a commissioning window again to commission it in Google’s ecosystem, and the device was failed at above step 2, so we also tried: Commissioning the device to Apple Home works as expected, next share the device to Google Home app on iOS, this also fails. Commissioning the device to Apple Home works as expected, next share the device to Google Home app on Android, this works as expected and device pops up in Google home of iOS as well. Could you help check what's the issue of TestCase2? Append the environment of our testing: NestHub 2 version Google Home app version
4
1
213
6d
NFCPresentmentIntentAssertion validity behavior
Hello, I would like to discuss the behavior of the expiration of NFCPresentmentIntentAssertion (test in iOS 18.5). In the documentation we have : The intent assertion expires if any of the following occur: The intent assertion object deinitializes Your app goes into the background 15 seconds elapse BUT; in fact ; only the 1st rule is applied. The expiration seems to be random after the usage of CardSession and that's difficult to give to the user a good experience. Has someone faced the same kind of issue; or can give an explanation? Regards, François
5
1
296
3w
EASession(accessory:forProtocol:) always returns nil — MFI accessory iAP2
EASession(accessory:forProtocol:) always returns nil — MFI accessory iAP2 Platform: iOS 17+ | Hardware: Custom MFI-certified accessory (USB-C, iAP2) | Language: Swift Problem We have a custom MFI-certified accessory communicating over USB-C using ExternalAccessory. The app calls EASession(accessory:forProtocol:) after receiving EAAccessoryDidConnect but it always returns nil. We never get past session creation. What we have verified We captured a sysdiagnose on-device and analysed the accessoryd-packets log. The full iAP2 handshake completes successfully at the OS level: USB attach succeeds MFI auth certificate is present and Apple-issued Auth challenge and response complete successfully IdentificationInformation is accepted by iOS — protocol string and Team ID are correct EAAccessoryDidConnect fires as expected iOS sends StartExternalAccessoryProtocolSession — the OS-level session is established So the hardware, MFI auth, protocol string, and Team ID are all correct. Despite this, EASession(accessory:forProtocol:) returns nil in the app. We also confirmed: Protocol string in UISupportedExternalAccessoryProtocols in Info.plist matches the accessory exactly Protocol string in code matches Info.plist App entitlements are correctly configured EAAccessoryManager.shared().registerForLocalNotifications() is called before connection Current connection code @objc private func accessoryDidConnect(_ notification: Notification) { guard let accessory = notification.userInfo?[EAAccessoryKey] as? EAAccessory else { return } DispatchQueue.main.asyncAfter(deadline: .now() + 1.0) { self.tryConnectToAccessory() } } private func tryConnectToAccessory() { DispatchQueue.main.asyncAfter(deadline: .now() + 3.0) { for accessory in EAAccessoryManager.shared().connectedAccessories { let session = EASession(accessory: accessory, forProtocol: "") // session is always nil here } } } Questions The packet log shows a ~4 second gap between EAAccessoryDidConnect firing and iOS internally completing session readiness (StartExternalAccessoryProtocolSession). Is there a reliable way to know when iOS Is it actually ready to grant an EASession, rather than using a fixed delay? Is there a delegate callback or notification that fires when the accessory protocol session is ready to be opened, rather than relying on EAAccessoryDidConnect + an arbitrary delay? Are there any known conditions on iOS 17+ under which EASession returns nil even though the iAP2 handshake completed successfully at the OS level? Is retrying EASession after a nil result a supported pattern, or does a nil result mean the session will never succeed for that connection? Any guidance appreciated.
5
0
149
6d
NEHotspotConfiguration apply returns userDenied error without user interaction
I’m encountering an unexpected issue while using NEHotspotConfigurationManager.shared.apply(...) to connect to a Wi-Fi network. Specifically, I’m receiving a userDenied error, even though the user did not interact with any system prompt. Here’s a version of the code I’m using: let config = NEHotspotConfiguration(ssid: ssid, passphrase: passphrase, isWEP: false) // config.joinOnce = true NEHotspotConfigurationManager.shared.apply(config) { error in if let err = error { let nsErr = err as NSError mlog("err.code:\(nsErr.code)") if nsErr.code == NEHotspotConfigurationError.alreadyAssociated.rawValue { self.findWiFiListAndConnect(ssid, passphrase, overtimeSec, timeStart) } else { self.cmdDelegateQueue.async { self.delegate?.wifiClose(nsErr.code) } } } } The error returned is: wifiClose status: 7 Which corresponds to NEHotspotConfigurationError.userDenied. According to the official Apple documentation, this error should only occur when the user explicitly cancels the system dialog. However, in my case: • No system dialog appears. • The user does nothing, yet the error is still returned. • This issue does not happen every time, but it has been observed across multiple devices. Additional info: • iOS version: 18.5 • Device model: iPhone • joinOnce is not set (defaults to false) • Existing configuration is removed using removeConfiguration(...) before applying Is it possible that under certain system states (e.g. backgrounded, network restrictions, or app permissions), iOS silently fails without showing the prompt? Has anyone else encountered this issue, or does anyone know what could cause this behavior? Any help is greatly appreciated!
6
0
312
Jul ’25
When using requestSendPTPCommand to send both commands and data simultaneously, the response timeout occurs and the length of the command and data in the response is 0, need help pls.
I am debugging ImageCaptureCore to communicate with external cameras. When I called the PTP function below to send a command and add data, the response timed out for more than 5 seconds. After waiting for a period of time, I obtained the response. However, the response callback function obtained responsivData.length as zero and ptpResponseData.length as zero too. (void)requestSendPTPCommand:(NSData *)ptpCommand outData:(NSData *)ptpData completion:(void (^)(NSData *responseData, NSData *ptpResponseData, NSError *error))completion; data is below: Wrote 1 = 0x1 bytes PTP:send data: (hexdump of 1 bytes) [ ] I/PTP (14564): 0000 01 - .
6
0
240
Sep ’25
Error 561145187 - Recording audio from keyboard extension
Hi, as other threads have already discussed, I'd like to record audio from a keyboard extension. The keyboard has been granted both full access and microphone access. Nonetheless whenever I attempt to start a recording from my keyboard, it fails to start with the following error: Recording failed to start: Error Domain=com.apple.coreaudio.avfaudio Code=561145187 "(null)" UserInfo={failed call=err = PerformCommand(*ioNode, kAUStartIO, NULL, 0)} This is the code I am using: import Foundation import AVFoundation protocol AudioRecordingServiceDelegate: AnyObject { func audioRecordingDidStart() func audioRecordingDidStop(withAudioData: Data?) func audioRecordingPermissionDenied() } class AudioRecordingService { weak var delegate: AudioRecordingServiceDelegate? private var audioEngine: AVAudioEngine? private var audioSession: AVAudioSession? private var isRecording = false private var audioData = Data() private let targetFormat = AVAudioFormat(commonFormat: .pcmFormatInt16, sampleRate: 16000, channels: 1, interleaved: false)! private func setupAudioSession() throws { let session = AVAudioSession.sharedInstance() try session.setCategory(.playAndRecord, mode: .spokenAudio, options: [.mixWithOthers, .allowBluetooth, .defaultToSpeaker]) try session.setPreferredIOBufferDuration(0.005) try session.setActive(true, options: .notifyOthersOnDeactivation) audioSession = session } func checkMicrophonePermission(completion: @escaping (Bool) -> Void) { switch AVAudioApplication.shared.recordPermission { case .granted: completion(true) case .denied: delegate?.audioRecordingPermissionDenied() completion(false) case .undetermined: AVAudioApplication.requestRecordPermission { [weak self] granted in if !granted { self?.delegate?.audioRecordingPermissionDenied() } completion(granted) } @unknown default: delegate?.audioRecordingPermissionDenied() completion(false) } } func toggleRecording() { if isRecording { stopRecording() } else { checkMicrophonePermission { [weak self] granted in if granted { self?.startRecording() } } } } private func startRecording() { guard !isRecording else { return } do { try setupAudioSession() audioEngine = AVAudioEngine() guard let engine = audioEngine else { return } let inputNode = engine.inputNode let inputFormat = inputNode.inputFormat(forBus: 0) audioData.removeAll() guard let converter = AVAudioConverter(from: inputFormat, to: targetFormat) else { print("Failed to create audio converter") return } inputNode.installTap(onBus: 0, bufferSize: 1024, format: inputFormat) { [weak self] buffer, _ in guard let self = self else { return } let frameCount = AVAudioFrameCount(Double(buffer.frameLength) * 16000.0 / buffer.format.sampleRate) guard let outputBuffer = AVAudioPCMBuffer(pcmFormat: self.targetFormat, frameCapacity: frameCount) else { return } outputBuffer.frameLength = frameCount var error: NSError? converter.convert(to: outputBuffer, error: &error) { _, outStatus in outStatus.pointee = .haveData return buffer } if error == nil, let channelData = outputBuffer.int16ChannelData { let dataLength = Int(outputBuffer.frameLength) * 2 let data = Data(bytes: channelData.pointee, count: dataLength) self.audioData.append(data) } } engine.prepare() try engine.start() isRecording = true delegate?.audioRecordingDidStart() } catch { print("Recording failed to start: \(error)") stopRecording() } } private func stopRecording() { audioEngine?.inputNode.removeTap(onBus: 0) audioEngine?.stop() isRecording = false let finalData = audioData audioData.removeAll() delegate?.audioRecordingDidStop(withAudioData: finalData) try? audioSession?.setActive(false, options: .notifyOthersOnDeactivation) } deinit { if isRecording { stopRecording() } } } Granting the deprecated "Inter-App Audio" capability did not solve the problem either. Is recording audio from a keyboard extension even possible in general? If so, how do I fix it? Related threads: https://developer.apple.com/forums/thread/108055 https://developer.apple.com/forums/thread/742601
7
1
787
Sep ’25
BLE Peripherals streaming speeds are significantly slowed with new hardware (iPhone 17, iPad A16)
Hi, we have developed an application that streams data from two BLE peripherals at a rate of 14.5kbps per peripheral. Until now, our devices streamed in near real time with no lag on all Apple devices with Bluetooth 5.0 or greater. Since the release of the iPhone 17 series and the iPad A16, we have reports from users of the data being streamed at significantly lower rates than expected. Any help here would be greatly appreciated as our customers are being affected by this change.
7
2
642
1w
EtreCheck (from Etresoft, Inc)
Hello I've noticed that this product, heavily promoted on the ASC forums for many years, is no longer available from the Apple App Store. Can anyone tell me the reason why the product is no longer supported? Friends have asked me if it is 'safe' to use. Is it? Note to moderator: If I'm asking in the wrong places, please redirect my question. Thank you.
9
0
5.2k
Aug ’25
Matter Operating Device issue
My team has developed an app with a biref Matter commissioner feature using the Matter framework on the MatterSupport extension. Our app support iOS and Android. However, we ran into a problem that the control certificate generated by the iOS app could not control the device on the Android side. And the control certificate generated by the Android app could not control the device on the iOS side. The Matter library used by Android is compiled by connectedhomeip. Does anyone have the same problem as us? How to solve this? Thank you
Replies
3
Boosts
0
Views
278
Activity
Feb ’26
readValueWithCompletionHandler: limitations?
Are there some undocumented (or, well, documented, but overlooked by me) prerequisites to the readValueWithCompletionHandler: method? The reason I ask is that occasionally I am getting the Read/Write operation failed error in the callback, even in cases where direct, non-deferred reading of the value worked properly. It seems to happen very consistently with some accessories and characteristics, not randomly; thus, it is not likely a temporary quirk in the communication with the device. Probably I am overlooking something of importance, but it does not make a good sense to me. My code (is it right, or can you see anything wrong in there?) // in an HMCharacteristic category if ([self.properties containsObject:HMCharacteristicPropertyReadable]) { id val=self.value, ident=[NSString stringWithFormat:@" [%@] %@ (%@)", self.uniqueIdentifier, self.localizedDescription, self.service.accessory.name]; NSLog(@"nondeferred '%@'%@", val, ident); if (self.service.accessory.reachable) { [self readValueWithCompletionHandler:^(NSError * _Nullable error) { if (error) NSLog(@"deferred ERROR %@ -> %@", ident, error); else NSLog(@"deferred '%@'%@", self.value, ident); }]; } } for most accessories/characteristics works properly, but for some of them I am consistently getting results like nondeferred '70.5' [64998F70-9C11-502F-B8B4-E99DC5C3171B] Current Relative Humidity (Vlhkoměr TH) deferred '70.5' ERROR [64998F70-9C11-502F-B8B4-E99DC5C3171B] Current Relative Humidity (Vlhkoměr TH) -> Error Domain=HMErrorDomain Code=74 "Read/Write operation failed." UserInfo={NSLocalizedDescription=Read/Write operation failed.} Do I do something wrong in my code, or is that normal with some devices? If the latter, is there perhaps a way to know beforehand that I should not use readValueWithCompletionHandler: (for it is bound to fail anyway), and instead I should simply use self.value non-deferred? For some time it seemed to me it happens with bridged accessories, but not really, this hypothesis proved wrong by further testing. Thanks!
Replies
3
Boosts
0
Views
240
Activity
Feb ’26
BLE advertising/scanning communication broken on iPhone 17 — CBPeripheralManager + CBCentralManager workflow
Environment: iPhone 17 / iPhone 17 Pro (Apple N1 chip) iOS 26.x Xcode 26 Framework: Flutter app with native iOS BLE library (CoreBluetooth) We have a production IoT app that communicates with BLE nodes (Nordic, PIC, EnOcean peripherals) using an advertising/scanning-based protocol — not GATT connections. The app broadcasts commands via CBPeripheralManager (advertising service UUIDs) and receives responses by scanning with CBCentralManager (reading manufacturer data and service UUIDs from advertisement packets). This workflow has been reliable across all iPhone models from iPhone 8 through iPhone 16 Pro Max. On iPhone 17 devices, we are experiencing multiple failures in this workflow. Architecture: Sending commands: We use CBPeripheralManager.startAdvertising() with CBAdvertisementDataServiceUUIDsKey to broadcast a UUID-encoded command to nearby nodes. Receiving responses: We use CBCentralManager.scanForPeripherals(withServices: nil, options: [CBCentralManagerScanOptionAllowDuplicatesKey: true]) and filter responses in centralManager(_:didDiscover:advertisementData:rssi:) by matching CBAdvertisementDataServiceUUIDsKey or CBAdvertisementDataManufacturerDataKey against expected UUID masks. Communication pattern: Advertise a command → stop advertiser → start scanner → wait for matching response → process result. Typical timeout is 1.5 seconds per exchange. Issues observed on iPhone 17: peripheralManagerDidStartAdvertising behaviour change After calling CBPeripheralManager.startAdvertising(:), the delegate callback peripheralManagerDidStartAdvertising(:error:) either fires with errors that did not occur on previous hardware, or advertising does not appear to reach the peripheral nodes at all. The same advertising payload works immediately when tested on iPhone 15/16. Is the N1 chip's Bluetooth 6 stack handling CBAdvertisementDataServiceUUIDsKey advertising differently? Are there new constraints on advertising payload size or format? Scanner returning fewer/no results with withServices: nil Our scanner uses scanForPeripherals(withServices: nil) because we need to read manufacturer data from advertisement packets and filter using a custom UUID mask. On iPhone 17, we observe significantly fewer didDiscover callbacks compared to iPhone 15/16 in the same physical environment, with the same nodes advertising. We understand that passing service UUIDs in withServices: is recommended, but our protocol requires reading raw manufacturer data bytes that aren't associated with a single service UUID — we use mask-based matching (e.g., filter mask 11110000-0000-0000-0000-000000000000 against scan results). Has the N1 chip changed the rate or filtering behaviour of unfiltered BLE scans? Is there a new throttling mechanism? Background scanning stops immediately When the app moves to background, scanning appears to stop entirely on iPhone 17 — even with bluetooth-central in UIBackgroundModes. On iPhone 16, background scanning continued (at reduced intervals) and delivered results for peripherals advertising filtered service UUIDs. Aggressive session termination on app backgrounding Our advertise-then-scan sequences (typically 1.5s round-trip) are being interrupted when the user briefly switches apps. The CBPeripheralManager stops advertising and the CBCentralManager stops scanning, causing timeout errors. This was not observed on previous iPhone models with the same iOS background mode configuration. Questions for Apple: Are there documented changes to CoreBluetooth behaviour on the N1 Bluetooth 6 chip that affect advertising-based (non-GATT) communication patterns? Has the scan response rate for scanForPeripherals(withServices: nil) been intentionally reduced on iPhone 17? Is CBCentralManagerOptionRestoreIdentifierKey now required for reliable background scanning on iPhone 17, or is this a known regression? Are there new advertising payload constraints (size, format, interval) that we should be aware of for the N1 chip? What we've tried: Added NSBluetoothAlwaysUsageDescription and NSBluetoothWhileInUseUsageDescription to Info.plist Confirmed Bluetooth permissions are granted Tested with identical BLE nodes that work on iPhone 15/16 Verified CBManagerState.poweredOn before all operations Any guidance or known workarounds would be greatly appreciated. Happy to provide sysdiagnose logs or a minimal reproducible sample project.
Replies
3
Boosts
0
Views
379
Activity
Feb ’26
Losing advertising packets when CBCentralManager scanForPeripheralsWithServices is left on
Right now, I am scanning for specific BLE peripherals with my iPad app, using this: [self.cbCentralManager scanForPeripheralsWithServices:serviceUUIDsToScanFor options:@{CBCentralManagerScanOptionAllowDuplicatesKey:@YES}]; I have the "CBCentralManagerScanOptionAllowDuplicatesKey" set true because I need to be able to detect when a peripheral is no longer advertising, so I capture each "didDiscoverPeripheral" callback and set a 3-second timer that notifies the user that that peripheral is no longer in range if another didDiscoverPeripheral hasn't been received in that time. The peripherals all advertise at 100ms intervals. What's weird is that if I leave the scan on for a long time, the advertising packets slow down, and eventually one of those timers times out, around about one or two minutes for the first instance, and then every 10-20 seconds after that. I've checked with ATS for all the BLE traffic, and there are indeed > 3-second gaps in the advertising packets that the iPad sees, so it's not my code introducing the gap. Is there some reason long-running scans should not be done on iPadOS (both 18 and 26.1 used)? I've tested out switching my scan to "stopScan" and restart it every 10 seconds, and that seems to have resolved the issue, but it's unclear why that would matter (and that does not seem like an appropriate use of the stop and start scans). Thanks!
Replies
3
Boosts
0
Views
158
Activity
Feb ’26
Bluetooth Connectivity Issues
Since 17.4 Dev Beta 2, I have been having Bluetooth issues. I had hoped it would have cleared up but even in 17.4.1 it continues. Airpod and Echo Auto are the only 2 audio devices I have. The audio will become chopping, rubber band or sound robotic and sometime completely disconnect. While driving it will occur on both audio devices. Sometimes I'm stopped at red light and the issue occurs. The phone is less than 3 feet from the device at all times. I have read forums and removed and readded the devices but that did not help. I really do not want to have to reset my phone since my 2FA apps do not recover in a restore. Anyone have any suggestions?
Replies
4
Boosts
0
Views
1.5k
Activity
Jun ’25
get display name and vendor info by IOKit framework
Hello, What is the best and Apple recommended way to get display name and its vendor information? The CoreGraphics framework provides ModelNumber and VendorNumber only. Looks like IOKit does not provide any documented way at all. Are there any daemon safe way to get such information? Thank you in advance, Pavel
Replies
4
Boosts
0
Views
198
Activity
Apr ’25
develop Find-My in product.
I am developing the electronic part of product, it includes a Find-My features. I saw some forum that testing Find-My feature needs a CSR and testing token. Can anyone teach me how to apply CSR and testing token step by step? Thank you very much. Best regards Sam Ng
Replies
4
Boosts
1
Views
365
Activity
Dec ’25
Keeping Video Stream Live While App is in the Background
We have an application that is built for communication for emergency first responders. Our app streams video from emergency responder mobile devices to other responders, however, when the app moves into the background, or the screen locks, the stream is terminated. Is there a way to allow the stream to persist.
Replies
4
Boosts
0
Views
154
Activity
Jul ’25
iOS 26 Beta 3 — iPhone 13 stuck at 1% battery, 0% battery health, reboots every few minutes
Hello Apple team and community, I’m reporting a critical issue affecting iPhone 13 (128 GB) on iOS 26 Public Beta 3. Problem Summary: • Device stays stuck at 1% battery, even while charging • Battery Health shows 0% in Settings • Phone reboots every 5 minutes while unplugged • Only works when connected to power • Cannot update, charge properly, or maintain uptime Additional Context: • The issue appeared immediately after installing iOS 26 beta 3 • Affected devices often have a replaced battery (even official or high-quality replacements) • Seems to be a software validation bug related to battery firmware • Reported by many users across Reddit, Apple Forums, and Twitter — but not listed in Known Issues What Has Been Tried: • Recovery Mode / Safe charging / Clean install (same version) – no effect • Third-party repair tools (ReiBoot, 3uTools) — partial workaround • Jailbreak with Nugget or iCleaner to disable crash daemons – temporarily helps • Apple Support suggested full device replacement (!) ⸻ Request: Please investigate and acknowledge this issue. This bug renders devices unusable for users with legitimate battery replacements — we need a fix in an upcoming beta.
Replies
4
Boosts
1
Views
1.5k
Activity
Aug ’25
BLE l2cap close not correct
We are develop an application with corebluetooth framework. we connect to device with ble. and open two l2cap channels. it can transfer data with stream. but when it close the second l2cap channel, it always close the first l2cap channel.
Replies
4
Boosts
0
Views
266
Activity
Sep ’25
Wallet no longer appear near iBeacon
Hello, We are testing Wallet passes with iBeacons in iOS 26 Beta. In earlier iOS releases, when a device was in proximity to a registered beacon, the corresponding pass would surface automatically. In iOS 26 Beta, this behavior no longer occurs, even if the pass is already present in Wallet. I have not found documentation of this change in the iOS 26 release notes. Could you please confirm whether this is expected in iOS 26, or if it may be a Beta-specific issue? Any pointers to updated documentation would be appreciated. Thank you.
Replies
4
Boosts
2
Views
317
Activity
1w
[Matter] Device cannot be commissioned to Google Home through iOS
Hi, We are facing the issue of commissioning our Matter device to google home through iOS device will be 100% failed. Here is our test summary regarding the issue: TestCase1 [OK]: Commissioning our Matter 1.4.0 device to Google Nest Hub 2 by Android device (see log DoorWindow_2.0.1_Google_Success.txt ) TestCase2 [NG]: Commissioning Matter 1.4.0 device to Google Nest Hub 2 by iPhone13 or iPhone16 (see log DoorWindow_2.0.1_Google_by_iOS_NG.txt ) TestCase3 [OK]: Commissioning our Matter 1.3.0 device to Google Nest Hub 2 by iPhone13 In TestCase2, we noticed that device was first commissioned to iOS(Apple keychain) then iOS opened a commissioning window again to commission it in Google’s ecosystem, and the device was failed at above step 2, so we also tried: Commissioning the device to Apple Home works as expected, next share the device to Google Home app on iOS, this also fails. Commissioning the device to Apple Home works as expected, next share the device to Google Home app on Android, this works as expected and device pops up in Google home of iOS as well. Could you help check what's the issue of TestCase2? Append the environment of our testing: NestHub 2 version Google Home app version
Replies
4
Boosts
1
Views
213
Activity
6d
NFCPresentmentIntentAssertion validity behavior
Hello, I would like to discuss the behavior of the expiration of NFCPresentmentIntentAssertion (test in iOS 18.5). In the documentation we have : The intent assertion expires if any of the following occur: The intent assertion object deinitializes Your app goes into the background 15 seconds elapse BUT; in fact ; only the 1st rule is applied. The expiration seems to be random after the usage of CardSession and that's difficult to give to the user a good experience. Has someone faced the same kind of issue; or can give an explanation? Regards, François
Replies
5
Boosts
1
Views
296
Activity
3w
EASession(accessory:forProtocol:) always returns nil — MFI accessory iAP2
EASession(accessory:forProtocol:) always returns nil — MFI accessory iAP2 Platform: iOS 17+ | Hardware: Custom MFI-certified accessory (USB-C, iAP2) | Language: Swift Problem We have a custom MFI-certified accessory communicating over USB-C using ExternalAccessory. The app calls EASession(accessory:forProtocol:) after receiving EAAccessoryDidConnect but it always returns nil. We never get past session creation. What we have verified We captured a sysdiagnose on-device and analysed the accessoryd-packets log. The full iAP2 handshake completes successfully at the OS level: USB attach succeeds MFI auth certificate is present and Apple-issued Auth challenge and response complete successfully IdentificationInformation is accepted by iOS — protocol string and Team ID are correct EAAccessoryDidConnect fires as expected iOS sends StartExternalAccessoryProtocolSession — the OS-level session is established So the hardware, MFI auth, protocol string, and Team ID are all correct. Despite this, EASession(accessory:forProtocol:) returns nil in the app. We also confirmed: Protocol string in UISupportedExternalAccessoryProtocols in Info.plist matches the accessory exactly Protocol string in code matches Info.plist App entitlements are correctly configured EAAccessoryManager.shared().registerForLocalNotifications() is called before connection Current connection code @objc private func accessoryDidConnect(_ notification: Notification) { guard let accessory = notification.userInfo?[EAAccessoryKey] as? EAAccessory else { return } DispatchQueue.main.asyncAfter(deadline: .now() + 1.0) { self.tryConnectToAccessory() } } private func tryConnectToAccessory() { DispatchQueue.main.asyncAfter(deadline: .now() + 3.0) { for accessory in EAAccessoryManager.shared().connectedAccessories { let session = EASession(accessory: accessory, forProtocol: "") // session is always nil here } } } Questions The packet log shows a ~4 second gap between EAAccessoryDidConnect firing and iOS internally completing session readiness (StartExternalAccessoryProtocolSession). Is there a reliable way to know when iOS Is it actually ready to grant an EASession, rather than using a fixed delay? Is there a delegate callback or notification that fires when the accessory protocol session is ready to be opened, rather than relying on EAAccessoryDidConnect + an arbitrary delay? Are there any known conditions on iOS 17+ under which EASession returns nil even though the iAP2 handshake completed successfully at the OS level? Is retrying EASession after a nil result a supported pattern, or does a nil result mean the session will never succeed for that connection? Any guidance appreciated.
Replies
5
Boosts
0
Views
149
Activity
6d
NEHotspotConfiguration apply returns userDenied error without user interaction
I’m encountering an unexpected issue while using NEHotspotConfigurationManager.shared.apply(...) to connect to a Wi-Fi network. Specifically, I’m receiving a userDenied error, even though the user did not interact with any system prompt. Here’s a version of the code I’m using: let config = NEHotspotConfiguration(ssid: ssid, passphrase: passphrase, isWEP: false) // config.joinOnce = true NEHotspotConfigurationManager.shared.apply(config) { error in if let err = error { let nsErr = err as NSError mlog("err.code:\(nsErr.code)") if nsErr.code == NEHotspotConfigurationError.alreadyAssociated.rawValue { self.findWiFiListAndConnect(ssid, passphrase, overtimeSec, timeStart) } else { self.cmdDelegateQueue.async { self.delegate?.wifiClose(nsErr.code) } } } } The error returned is: wifiClose status: 7 Which corresponds to NEHotspotConfigurationError.userDenied. According to the official Apple documentation, this error should only occur when the user explicitly cancels the system dialog. However, in my case: • No system dialog appears. • The user does nothing, yet the error is still returned. • This issue does not happen every time, but it has been observed across multiple devices. Additional info: • iOS version: 18.5 • Device model: iPhone • joinOnce is not set (defaults to false) • Existing configuration is removed using removeConfiguration(...) before applying Is it possible that under certain system states (e.g. backgrounded, network restrictions, or app permissions), iOS silently fails without showing the prompt? Has anyone else encountered this issue, or does anyone know what could cause this behavior? Any help is greatly appreciated!
Replies
6
Boosts
0
Views
312
Activity
Jul ’25
iOS 26 update error
Hello. I have a problem with update check ! Say “ error to Check update” update section on my iPhone 16 pro. what Is the solution to fix?
Replies
6
Boosts
3
Views
867
Activity
Jun ’25
When using requestSendPTPCommand to send both commands and data simultaneously, the response timeout occurs and the length of the command and data in the response is 0, need help pls.
I am debugging ImageCaptureCore to communicate with external cameras. When I called the PTP function below to send a command and add data, the response timed out for more than 5 seconds. After waiting for a period of time, I obtained the response. However, the response callback function obtained responsivData.length as zero and ptpResponseData.length as zero too. (void)requestSendPTPCommand:(NSData *)ptpCommand outData:(NSData *)ptpData completion:(void (^)(NSData *responseData, NSData *ptpResponseData, NSError *error))completion; data is below: Wrote 1 = 0x1 bytes PTP:send data: (hexdump of 1 bytes) [ ] I/PTP (14564): 0000 01 - .
Replies
6
Boosts
0
Views
240
Activity
Sep ’25
Error 561145187 - Recording audio from keyboard extension
Hi, as other threads have already discussed, I'd like to record audio from a keyboard extension. The keyboard has been granted both full access and microphone access. Nonetheless whenever I attempt to start a recording from my keyboard, it fails to start with the following error: Recording failed to start: Error Domain=com.apple.coreaudio.avfaudio Code=561145187 "(null)" UserInfo={failed call=err = PerformCommand(*ioNode, kAUStartIO, NULL, 0)} This is the code I am using: import Foundation import AVFoundation protocol AudioRecordingServiceDelegate: AnyObject { func audioRecordingDidStart() func audioRecordingDidStop(withAudioData: Data?) func audioRecordingPermissionDenied() } class AudioRecordingService { weak var delegate: AudioRecordingServiceDelegate? private var audioEngine: AVAudioEngine? private var audioSession: AVAudioSession? private var isRecording = false private var audioData = Data() private let targetFormat = AVAudioFormat(commonFormat: .pcmFormatInt16, sampleRate: 16000, channels: 1, interleaved: false)! private func setupAudioSession() throws { let session = AVAudioSession.sharedInstance() try session.setCategory(.playAndRecord, mode: .spokenAudio, options: [.mixWithOthers, .allowBluetooth, .defaultToSpeaker]) try session.setPreferredIOBufferDuration(0.005) try session.setActive(true, options: .notifyOthersOnDeactivation) audioSession = session } func checkMicrophonePermission(completion: @escaping (Bool) -> Void) { switch AVAudioApplication.shared.recordPermission { case .granted: completion(true) case .denied: delegate?.audioRecordingPermissionDenied() completion(false) case .undetermined: AVAudioApplication.requestRecordPermission { [weak self] granted in if !granted { self?.delegate?.audioRecordingPermissionDenied() } completion(granted) } @unknown default: delegate?.audioRecordingPermissionDenied() completion(false) } } func toggleRecording() { if isRecording { stopRecording() } else { checkMicrophonePermission { [weak self] granted in if granted { self?.startRecording() } } } } private func startRecording() { guard !isRecording else { return } do { try setupAudioSession() audioEngine = AVAudioEngine() guard let engine = audioEngine else { return } let inputNode = engine.inputNode let inputFormat = inputNode.inputFormat(forBus: 0) audioData.removeAll() guard let converter = AVAudioConverter(from: inputFormat, to: targetFormat) else { print("Failed to create audio converter") return } inputNode.installTap(onBus: 0, bufferSize: 1024, format: inputFormat) { [weak self] buffer, _ in guard let self = self else { return } let frameCount = AVAudioFrameCount(Double(buffer.frameLength) * 16000.0 / buffer.format.sampleRate) guard let outputBuffer = AVAudioPCMBuffer(pcmFormat: self.targetFormat, frameCapacity: frameCount) else { return } outputBuffer.frameLength = frameCount var error: NSError? converter.convert(to: outputBuffer, error: &error) { _, outStatus in outStatus.pointee = .haveData return buffer } if error == nil, let channelData = outputBuffer.int16ChannelData { let dataLength = Int(outputBuffer.frameLength) * 2 let data = Data(bytes: channelData.pointee, count: dataLength) self.audioData.append(data) } } engine.prepare() try engine.start() isRecording = true delegate?.audioRecordingDidStart() } catch { print("Recording failed to start: \(error)") stopRecording() } } private func stopRecording() { audioEngine?.inputNode.removeTap(onBus: 0) audioEngine?.stop() isRecording = false let finalData = audioData audioData.removeAll() delegate?.audioRecordingDidStop(withAudioData: finalData) try? audioSession?.setActive(false, options: .notifyOthersOnDeactivation) } deinit { if isRecording { stopRecording() } } } Granting the deprecated "Inter-App Audio" capability did not solve the problem either. Is recording audio from a keyboard extension even possible in general? If so, how do I fix it? Related threads: https://developer.apple.com/forums/thread/108055 https://developer.apple.com/forums/thread/742601
Replies
7
Boosts
1
Views
787
Activity
Sep ’25
BLE Peripherals streaming speeds are significantly slowed with new hardware (iPhone 17, iPad A16)
Hi, we have developed an application that streams data from two BLE peripherals at a rate of 14.5kbps per peripheral. Until now, our devices streamed in near real time with no lag on all Apple devices with Bluetooth 5.0 or greater. Since the release of the iPhone 17 series and the iPad A16, we have reports from users of the data being streamed at significantly lower rates than expected. Any help here would be greatly appreciated as our customers are being affected by this change.
Replies
7
Boosts
2
Views
642
Activity
1w
EtreCheck (from Etresoft, Inc)
Hello I've noticed that this product, heavily promoted on the ASC forums for many years, is no longer available from the Apple App Store. Can anyone tell me the reason why the product is no longer supported? Friends have asked me if it is 'safe' to use. Is it? Note to moderator: If I'm asking in the wrong places, please redirect my question. Thank you.
Replies
9
Boosts
0
Views
5.2k
Activity
Aug ’25