Hi, You're here because you've had issues with your implementation of Wallet Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I'm successfully using Apple subscriptions in my app, but I'm encountering SKErrorCodeDomain error 18 when trying to apply a subscription offer. I want apply offer code first time only for subscription. Below are details of what i set in appstore and what i have tested. Subscription Offer Details Offer Type: For the first month Customer Eligibility: New, Existing, and Expired Subscribers Code Status: Active Offer Code Creation Steps: App Store Connect → App → Subscription → Select Subscription Product → Offer Codes → Add → Add Custom Codes Signature Generation for Promotional Offers I'm following Apple's documentation to generate a signature: https://developer.apple.com/documentation/storekit/generating-a-signature-for-promotional-offers I’ve constructed the payload as instructed: appBundleId + '\u2063' + keyIdentifier + '\u2063' + productIdentifier + '\u2063' + offerIdentifier + '\u2063' + appAccountToken + '\u2063' + nonce + '\u2063' + timestamp Keys and Identifiers keyIdentifier, issuerId, and .p8 file are obtained from: App Store Connect → Users and Access → Integrations → In-App Purchase Test user created under: App Store Connect → Users and Access → Sandbox → Test Accounts Logged in with this account on the iPhone What I’ve Tried Verified all values used in the payload are correct Tried both seconds and milliseconds for the timestamp (as per documentation, it should be in milliseconds) Tried setting appAccountToken to: a valid UUID an empty string not setting it at all Used Apple’s sample code to generate a signature: https://developer.apple.com/documentation/storekit/generating-a-promotional-offer-signature-on-the-server Verified the generated signature locally, and it validated successfully: https://developer.apple.com/documentation/storekit/generating-a-signature-for-promotional-offers#Validate-locally-and-encode-the-signature Apple’s sample code to generate a signature Downloaded from const express = require('express'); const router = express.Router(); const crypto = require('crypto'); const ECKey = require('ec-key'); const secp256k1 = require('secp256k1'); const uuidv4 = require('uuid/v4'); const KeyEncoder = require('key-encoder'); const keyEncoder = new KeyEncoder('secp256k1'); const fs = require('fs'); function getKeyID() { return "KEYIDXXXXX"; } router.post('/offer', function(req, res) { const appBundleID = req.body.appBundleID; const productIdentifier = req.body.productIdentifier; const subscriptionOfferID = req.body.offerID; const applicationUsername = req.body.applicationUsername; const nonce = uuidv4(); const currentDate = new Date(); const timestamp = currentDate.getTime(); const keyID = getKeyID(); const payload = appBundleID + '\u2063' + keyID + '\u2063' + productIdentifier + '\u2063' + subscriptionOfferID + '\u2063' + applicationUsername + '\u2063'+ nonce + '\u2063' + timestamp; // Get the PEM-formatted private key string associated with the Key ID. // const keyString = getKeyStringForID(keyID); // Read the .p8 file const keyString = fs.readFileSync('./SubscriptionKey_47J5826J8W.p8', 'utf8'); // Create an Elliptic Curve Digital Signature Algorithm (ECDSA) object using the private key. const key = new ECKey(keyString, 'pem'); // Set up the cryptographic format used to sign the key with the SHA-256 hashing algorithm. const cryptoSign = key.createSign('SHA256'); // Add the payload string to sign. cryptoSign.update(payload); /* The Node.js crypto library creates a DER-formatted binary value signature, and then base-64 encodes it to create the string that you will use in StoreKit. */ const signature = cryptoSign.sign('base64'); /* Check that the signature passes verification by using the ec-key library. The verification process is similar to creating the signature, except it uses 'createVerify' instead of 'createSign', and after updating it with the payload, it uses `verify` to pass in the signature and encoding, instead of `sign` to get the signature. This step is not required, but it's useful to check when implementing your signature code. This helps debug issues with signing before sending transactions to Apple. If verification succeeds, the next recommended testing step is attempting a purchase in the Sandbox environment. */ const verificationResult = key.createVerify('SHA256').update(payload).verify(signature, 'base64'); console.log("Verification result: " + verificationResult) // Send the response. res.setHeader('Content-Type', 'application/json'); res.json({ 'keyID': keyID, 'nonce': nonce, 'timestamp': timestamp, 'signature': signature }); }); module.exports = router; Postman request and response Request URL: http://192.168.1.141:3004/offer Request JSON: { "appBundleID":"com.app.bundleid", "productIdentifier":"subscription.product.id", "offerID":"OFFERCODE1", "applicationUsername":"01234b43791ea309a1c3003412bcdaaa09d39a615c379cc246f5f479760629a1" } Response JSON: { "keyID": "KEYIDXXXXX", "nonce": "f98f2cda-c7a6-492f-9f92-e24a6122c0c9", "timestamp": 1753510571664, "signature": "MEYCIQCnA8UGWhTiCF+F6S55Zl6hpjnm7SC3aAgvmTBmQDnsAgIhAP6xIeRuREyxxx69Ve/qjnONq7pF1cK8TDn82fyePcqz" } Xcode Code func buy(_ product: SKProduct) { let discountOffer = SKPaymentDiscount( identifier: "OFFERCODE1", keyIdentifier: "KEYIDXXXXX", nonce: UUID(uuidString: "f98f2cda-c7a6-492f-9f92-e24a6122c0c9")!, signature: "MEYCIQCnA8UGWhTiCF+F6S55Zl6hpjnm7SC3aAgvmTBmQDnsAgIhAP6xIeRuREyxxx69Ve/qjnONq7pF1cK8TDn82fyePcqz", timestamp: 1753510571664) let payment = SKMutablePayment(product: product) payment.applicationUsername = "01234b43791ea309a1c3003412bcdaaa09d39a615c379cc246f5f479760629a1" payment.paymentDiscount = discountOffer SKPaymentQueue.default().add(payment) } Issue Even following instructions to the documentation and attempting various combinations, the offer keeps failing with SKErrorCodeDomain error 18. Has anyone else experienced this? Any suggestions as to what may be amiss or how it can be corrected?

Hi Apple Team and Developers, I’ve been testing the Top-up flow in our app via the TestFlight environment. Across multiple devices (around 10 tested), everything works fine with no issues. However, on one specific device — iPhone 14 Pro Max running iOS 18.6.2 — I’ve noticed an intermittent issue: When performing a Top-up, the Apple UI first shows a successful purchase confirmation. Immediately afterward, another UI prompt appears asking the player to re-enter their Apple ID password. At the same time, Apple returns a ghost string that we cannot use to verify the user’s package bundle ID. This creates potential confusion for users, as they see both a success confirmation and an unexpected password prompt. I’m unsure if this behavior is expected or if there’s a recommended way to handle or prevent this issue. Has anyone else encountered something similar, or does Apple have a suggested fix/workaround for this? For reference, here’s a short video of the issue in action: \🔗 https://drive.google.com/file/d/1Ml-QpEu4ocoxn-W3wEMsFMbXy2QdwbHB/view?usp=sharing Any guidance would be greatly appreciated. Thank you for your support!

We created apps for many credit unions in Canada. Some of those apps has the feature to directly add users' debit cards to Apple Wallet (which is called by Apple as "in-app provisioning"). The feature has been working fine for at least 6 years for many credit unions. Recently, after updating one of those existing apps, we found out that the in-app provisioning is no longer working. Found it very strange, as we didn't touch the code base related to this feature for a very long time. One thing we found out is that the option to add in-app provisioning entitlement is missing during generating "provisioning profile" for the app. Is this a misconfiguration by App? Or do we need to request for additional entitlement migration as mentioned in the page: https://developer.apple.com/help/account/reference/provisioning-with-managed-capabilities ? Apple, please help, it's rather urgent.

We have verified our domain but if the file is removed from the deployed site after verification will this impact using ApplePaySession.applePayCapabilities in real time? We use that method from the JS api in our React app to determine whether or not to show the apple pay button. When that function is called in the browser, do the apple servers ping the https://our.domain.com/.well-known/apple-developer-merchantid-domain-association URL at that time? Or do they check for it periodically? The reason for asking is that with our many environments we wonder if we can verify each environment's domain by adding the file once. The file will be wiped out by our CICD process as it goes up the environment stack through our development workflow. Or do we need to maintain that file for each environment and add something to our build process?

I'm encountering an issue with Apple Pay on both Wallet and the Watch app where the app name is not showing up on the back of the payment card(Card details). The pass was successfully provisioned, and everything seems to be working, but the expected app name or brand isn't displayed, and instead, I see the generic "Something went wrong. Try again Later" message. Do we need to configure something to get this displayed in Wallet app?

Hey, Please help us to know how to get our payments of sales with iOS app we have, since beginning, our amount is pending with them and despite sevarel attempts they are providing the real issue and solutions for matter. Please suggest how to fix this issue.

iOS 16 and earlier On iOS 16 and earlier, Apple Pay on the Web required Safari—and all interactions with the Apple Pay API to come from the parent/top level page. In order to facilitate the Apple Pay button in an HTML inline frame (iframe), there will need to be cross frame communication between the child and parent pages. Cross frame communication should be secure and robust, therefore the use of postMessage for this purpose is recommended. The expectation is for all communication with Apple Pay to occur from the parent page, so the iframe must relay all Apple Pay related events to the parent to handle. Some examples: Apple Pay availability: The parent calls applePayCapabilities, then sends the message of the response to the iframe, which then uses the value to toggle the visibility of the Apple Pay button. Apple Pay session: The iframe receives an onclick() event when the Apple Pay button is clicked and sends the message to the parent (providing details about the transaction). The parent create the payment request to obtain the session validation URL, and eventually receive session credentials and invokes completeMerchantValidation() to prevent the payment sheet. After the payment is authorized by the Payment Service Provider (PSP), the parent either: Redirects the parent page to a payment success page; or Sends a message to the iframe to complete the transaction flow itself. iOS 17 and later On IOS 17 and later, the iframe HTML element should include the allow="payment" attribute, which should facilitate the cross frame communications instead of needing a dedicated JavaScript library. This means all of the Apple Pay code/calls can reside in the iframe page—which is typically a hosted page from a Payment Service Provider (PSP), all the parent page—typically a merchant—has to do is add the attribute mentioned above to the iframe element. Important: Regardless of the iOS version, the PSP/merchant always needs to make sure the parent page domain is the one registered in the Developer portal, and used in the request to generate a merchant session via ApplePaySession. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Our company sells insurance and we'd like to offer annual renewals via Apple Pay on the Web. Most of the docs seem to point towards using recurringpaymentrequest but this method required an amount value which would only be calculated at renewal time. It appears that Shopify is doing something akin to what we want where they do auto payments so my question is can we do annual payments with unknown renewal prices with Apple Pay for Web ? What we cannot do is show the renewal price like this as it being insurance is almost certain to change. This is our current code which works but won't get past the regulator. const applePayPaymentRequestAnnual = { countryCode: 'GB', currencyCode: 'GBP', supportedNetworks: ['visa', 'masterCard'], merchantCapabilities: ['supports3DS'], requiredBillingContactFields: ['postalAddress', 'email'], requiredShippingContactFields: ['phone'], recurringPaymentRequest: { paymentDescription: 'Annual Insurance Renewal', regularBilling: { label: 'Annual Renewal Premium', amount: price, paymentTiming: "recurring", recurringPaymentIntervalUnit: "year", recurringPaymentStartDate: year + "-" + month + "-" + day + "T00:00:00.000Z", type: 'final' }, managementURL: window.location.protocol + '//' + window.location.host + '/manage-policy', tokenNotificationURL: window.location.protocol + '//' + window.location.host + '/apple-pay-notifications' }, lineItems: [{ label: alabel, amount: price, }], total: { label: alabel, amount: price, type: "final" }, }

Hello, We have implemented In-App Verification using both SMS and mobile app options. While SMS functions as expected, selecting the mobile app for verification in the Wallet app does not open our app on the first attempt. Instead, the verification window simply dismisses. However, if I select "Complete Verification" again and choose the mobile app, deep linking works as expected, and our app opens correctly. This issue occurs with any bank card and app I’ve tested in Wallet. Could this be a bug in the Wallet app where deep linking fails on the first attempt but works on the second?

Hello everyone, I have a small error 23. I wanted to know if you also already have this error so in the simulator it works, I have no error, but once I do in the TestFlight I have the error that appears error 23, can anyone help me on this? Thanks a lot.

Body: Hello, We are currently implementing iOS order verification and have encountered an issue. Some of the receipts we verify return with an empty in_app array, which makes it impossible to determine whether there is a valid in-app purchase. Below is the code we’re using for verification and the result we receive: Code Example: public function iosVerifyReceipt($receipt, $password = '', $sandbox = false) { $url = $sandbox ? 'https://sandbox.itunes.apple.com/verifyReceipt' : 'https://buy.itunes.apple.com/verifyReceipt'; if (empty($password)) { $data = json_encode(['receipt-data' => $receipt]); } else { $data = json_encode(['receipt-data' => $receipt, 'password' => $password]); } $ch = curl_init($url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, $data); $result = curl_exec($ch); curl_close($ch); $result = json_decode($result, true); $result = $result ?? []; $result['sandbox'] = $sandbox; if ($result['status'] != 0) { Log::warning('ios verify receipt failed', ['receipt' => $receipt, 'result' => $result, 'sandbox' => $sandbox]); if ($result['status'] == 21007) { return $this->iosVerifyReceipt($receipt, $password, true); } } return $result; } // Order validation check if (empty($result) || $result['status'] != 0) { throw new BadRequestHttpException("Ios Order Verify Error"); } $appItemId = $result['receipt']['app_item_id'] ?? ""; if ($appItemId != MY_APP_ID) { throw new BadRequestHttpException("Ios Order Verify Error"); } $inApp = array_filter($result['receipt']['in_app'] ?? [], function ($item) use ($transactionId, $order) { return $item['transaction_id'] == $transactionId && $item['product_id'] == $order->getProductId(); }); if (empty($inApp)) { throw new BadRequestHttpException("Ios Order Verify Error"); } Array ( [receipt] => Array ( [receipt_type] => Production [adam_id] => * [app_item_id] => * [bundle_id] => * [application_version] => * [download_id] => * [version_external_identifier] => * [receipt_creation_date] => 2025-02-11 04:06:47 Etc/GMT [receipt_creation_date_ms] => * [receipt_creation_date_pst] => 2025-02-10 20:06:47 America/Los_Angeles [request_date] => 2025-02-11 15:54:56 Etc/GMT [request_date_ms] => * [request_date_pst] => 2025-02-11 07:54:56 America/Los_Angeles [original_purchase_date] => 2025-02-11 04:02:41 Etc/GMT [original_purchase_date_ms] => * [original_purchase_date_pst] => 2025-02-10 20:02:41 America/Los_Angeles [original_application_version] => 5511 [preorder_date] => 2025-01-17 21:12:28 Etc/GMT [preorder_date_ms] => * [preorder_date_pst] => 2025-01-17 13:12:28 America/Los_Angeles [in_app] => Array ( ) ) [environment] => Production [status] => 0 [sandbox] => ) Problem Description: • We are noticing that in some orders, the in_app array is returned as empty. This causes difficulty in verifying the presence of in-app purchases. • Our validation logic assumes that if in_app is empty, the order is invalid, but we would like clarification on whether this is correct or if such a scenario is normal under certain conditions. Actions Taken: • We have reviewed Apple’s documentation and other related resources, but no clear explanation is given about when in_app might be empty. • Can we safely rely on an empty in_app array to consider the order invalid, or should we investigate further for potential issues like delays or errors during the verification process? We would appreciate your guidance on how to handle such cases. Thank you for your support!

Hello My app has implementation of In App Provisioning which is working fine. We have now added Wallet Extensions to it, but my App is not shown in Apple Wallet "From apps on your iphone" I have uploaded Feedback (FB16450547) at https://feedbackassistant.apple.com/feedback/16450547 Kindly request for your advice

Hi all, I’m running into a confusing issue with Apple Pay domain verification. Apple’s documentation says to host the verification file at: https://yourdomain.com/.well-known/apple-developer-merchantid-domain-association And the portal itself seems to expect the file to be served with .txt extension during verification. My first verification passed, but subsequent checks are failing — and I’m wondering if this mismatch is the cause. Should I Keep the .txt and configure my server to serve it at both paths? Would appreciate any insights or official clarification. Thanks!

Hi, We're experiencing an issue with verifying our domain for Apple Pay on the web. It's currently stuck in the "Pending" state despite meeting the listed requirements. The domain in question has been verified once successfully but one month later when we renewed the SSL, we were unable to verify the domain again. Please note that the new certificate's CA chain has been changed. A) The "apple-developer-merchantid-domain-association.txt" file is publicly accessible at the following location: /.well-known/apple-developer-merchantid-domain-association.txt B) We've also ensured that the following IP ranges are whitelisted: 17.32.139.128/27 17.32.139.160/27 17.140.126.0/27 17.140.126.32/27 17.179.144.128/27 17.179.144.160/27 17.179.144.192/27 17.179.144.224/27 17.253.0.0/16 17.23.4.96/27 17.132.108.64/26 17.23.24.32/27 17.23.19.0/27 17.157.40.128/27 17.157.44.128/27 17.157.32.0/27 C) Our servers support TLS 1.2 already. D) "ECDHE-RSA-AES128-GCM-SHA256" cipher suite has been used, so we believe all necessary criteria are satisfied. However, when we attempt to verify the domain, we receive the following error message: "Domain verification failed. Review your TLS Certificate configuration to confirm that the certificate is accessible and a supported TLS Cipher Suite is used." Could you please advise why the verification is failing, or let us know if there's anything we might have missed? Best regards, Mehdi

we are currently using the requestAutomaticPassPresentationSuppression API in my app. to prevent the Wallet interface from appearing when an NFC/RF reader is detected during active app usage. Recently, a new transit card supporting Express Mode (T-money Transit Card) was released in Korea, and we are seeing an increasing number of users enabling Express Mode. However, this has introduced an issue where users are unable to use the BLE-based functionality we provide via our widget. Specifically, when the user taps our widget, it triggers a BLE signal broadcast for approximately 10 seconds. In this scenario, when the user brings their iPhone close to our reader, Express Mode is activated before the BLE interaction can be established. This prevents the BLE signal from being successfully received and processed. We would like to ask: Is it possible to suppress Express Mode behavior (similar to requestAutomaticPassPresentationSuppression) even when the app is launched via a widget interaction? Alternatively, is there any way to delay or defer Express Mode activation temporarily when launching from a widget or during BLE communication? We would appreciate any guidance or best practices you can share regarding this scenario. Thank you.

We have an Apple Pay account and have successfully created and verified the payment processing certificate in our Apple Developer account. When initiating an Apple Pay payment, the Apple session is created successfully with the correct data return from api , but it is not accepted with the error: “Payment not completed.” The issue occurs even though the merchant validation step works without errors. Our websites where this is happening are: https://magicdeliver.com/ https://www.pulsarmodular.com/ Could you please help us identify the cause of the issue and guide us on resolving it?

Basic information: The issuer has implemented the feature to active Apple Card via URL Verification. The feature implemented by issuer is supported both in the APP and Clips. When Apple queries the activation method from UnionPay, UnionPay returns the "URL" activation method to Apple. Additionally, the apple-app-site-association file has been correctly deployed, and the configuration for Universal Links has been completed. Both the APP and Clips have undergone testing for Universal Link calls. The desired experiece is that when the APP is installed, Apple Wallet launches the APP, and the user completes the activation within the APP, and if the APP is not installed, Apple Wallet calls Clips, and the user completes the activation in Clips. Problem description: Under iOS 17 and iOS 18, when triggering Apple Pay card activation, the APP or Clips can be called as expected, and the activation can be completed well. However, Under iOS 26, regardless of whether the APP is installed, under the same circumstances, an internal browser within Apple Wallet opens to access the H5 page corresponding to the URL, instead of redirecting to the APP or Clips. Please assist in confirming whether this is a new feature of iOS 26 and how the same user experience can be achieved.

Why did my sandbox test fail due to not being able to obtain the product list?

Hi Support, When the applepay express transit option is used on emv payment cards, like this iPhone - Open “Settings” → “Wallet & Apple Pay” → “Express Transit Card”. And a emv single card has been enabled under Express Transit And on transit reader Apple Enhanced contactless Polling support is provided, ( with VAS not supported, user authentciation not supported) Sometimes ATQB response also comes from the iPhone or iWatch instead of the ATQA response, and then it causes the transit reader to report as collision error in the polling. Sequence of the packets: WUPA WUPB ECP frame WUPA WUPB ATQB WUPA ATQA

Hi, We have app in which we take donations from people and send to non-profit organisations. I have read that Apple Pay can be integrated on non profit platforms to take donations, but we are middle man, we are not non profit .. we take donations, cut our platform fees and then sent to donations to non profit orgs. My question is can we integrate Apple Pay in our iOS app to take donations from apple? as we have integrated Apple Pay on the web.